CNC Working centre 3-axis NEW Xilog Plus

SCM Record 110

Stanje: rabljeno, Leto izdelave: 2005, Delovno območje: X=2970 mm / Y=1725 mm. Hitrosti pomika osi: X=60, Y=45, Z=25 m/min. Teža: 3200 kg. Lokacija skladišča: Nattheim. Chjdpfx Apow Dccce Ejd

Stanje: rabljeno, - Working width (mm): 140 Cedpfxerg Exro Ap Eohd - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top 6th shaft: bottom 7th shaft: universal shaft

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 3.060 mm, pomik osi Y: 1.240 mm, pomik po osi Z: 200 mm, število osi: 5, moč vretenovega motorja: 8.500 W, CNC-obdelovalni center za obdelavo lesa, leto izdelave 2005. Ta model SCM Record 110AL ima delovno površino 3.060 mm v smeri osi X in 1.240 mm v smeri osi Y ter maksimalno višino za prehod plošče 200 mm. Opremljen je s skupno 18 vreteni za vrtanje in zmogljivo glavno elektro vreteno z močjo 8,5 kW. Če iščete visokokakovostne zmogljivosti pri vrtanju in frezanju, razmislite o stroju SCM Record 110AL, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. Csdpfxoz Iy N Ns Ap Eshd • Način obdelave: Vrtanje in frezanje • Maks. prehod plošče: 200 mm • Število delovnih področij: 2 • Tip mize: Ravna miza • Konfiguracija mize: Razporeditev • Dimenzije mize: 3.060 × 1.240 mm • Število nadzorovanih osi: 5 • Vrtalne enote: 1 • Vertikalna vretena za vrtanje: 12 • Horizontalna vretena za vrtanje, smer X: 4 • Horizontalna vretena za vrtanje, smer Y: 2 • Skupno število vreten za vrtanje: 18 • Vretena za frezanje: 1 • Nadzorovane osi vretena za frezanje: 5 • Hlajenje vretena: Hladilni sistem s tekočino • Enote za utorne frezanje: 1 • Utorna enota: Fiksna, smer X • Moč glavnega elektro vretena: 8,5 kW • Moč vretena za frezanje: 8,5 kW • Nadzor: Računalniški nadzor (PC) • Programska oprema: Xylog Plus • Magazin za orodje s 16 mesti • Avtomatski menjalnik orodja • CE-oznaka Dodatna oprema • Vakuumska črpalka: 1 (sesalna moč 250 m³/h) • Sesalne plošče za pritrditev obdelovanca • Varnostne podloge na sprednji strani

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Leto izdelave: 2003 Napetost: 400 V Frekvenca: 50 Hz Teža: 3200 kg Število osi: 3 Csdstr A Evspfx Ap Eshd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: A3347169, Funkcionalnost: popolnoma funkcionalen, število osi: 3, CNC stroj SCM, Record 100 AL action line, 3-osna linija za obdelavo lesa, 400V, leto izdelave 16/07/2008, elektro omara, upravljanje z varnostno preprogo, pregradna stena, delovna površina 305 x 122 cm, skupna dimenzija stroja: približno 565 x 250 x 260 cm, lastna demontaža 3 osi V popolnem delujočem stanju 1 velika vakuumska črpalka z belo ploščo za detajle in 1 mala vakuumska črpalka: Leto 2019 / N°A3347169 Tip VTLF2.250/0-79 Frekvenca 50/50Hz Cjdpfx Aexg El Aep Ejhd Hitrost 950/1150min-1 Potrebna moč 5,5/6,4kW Sesalna zmogljivost 244/286m³/h Največji vakuum 200/200mbar Na voljo je video.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, številka stroja/vozila: AA1/015406, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 14.808 h, delovna širina: 1.300 mm, največja hitrost vretena: 24.000 obr/min, delovna višina: 200 mm, delovna dolžina: 3.110 mm, Brez minimalne cene – zagotovljena prodaja ponudniku z najvišjo ponudbo! Stroj je še vedno v obratovanju in ga je mogoče z veseljem ogledati pod napetostjo! TEHNIČNI PODATKI Delovno območje X-os: 3.110 mm Delovno območje Y-os: 1.300 mm Delovno območje Z-os: 200 mm Največji hod X-os: 3.500 mm Največji hod Y-os: 1.815 mm Največji hod Z-os: 440 mm Dolžina mize: 3.050 mm Širina mize: 13 mm Število rezkalnih vreten: 1 Hitrost vretena: 600 - 24.000 min⁻¹ Število krmiljenih osi: 5 Horizontalna vrtalna vretena: 6 Vertikalna vrtalna vretena: 12 Mesta za orodja v izmenjevalcu: 16 PODATKI O STROJU Glavna moč motorja: 11 kW Moč glavne vakuumske črpalke: 5,5 kW Kapaciteta vakuumske črpalke: 250 m³/h Dimenzije & Teža Dimenzije (D x Š x V): 9.000 x 2.450 x 2.850 mm Postavljene mere (D x Š x V): 4.600 x 6.500 x 3.400 mm Transportne mere: 9.000 x 2.450 x 2.850 mm Lastna teža: 4.000 kg Transportni paketi: 1 kos Chodpezdy E Sefx Ap Eed Delovne ure: 14.808 h OPREMA Rezkalna miza: prizmatična/balkonska miza Sistem za vpenjanje orodij: HSK-F63 Sistem za vpenjanje materiala: pnevmatski Vrtalno orodje Enota za žaganje Sistem/Programska oprema: Xilog plus Varnostna oprema: varnostna preproga Vakuumska črpalka: Becker CNC možnosti: transportni trak za odpadke, ročni upravljalnik CNC dokumentacija: uporabniški ključ/licence

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, CNC Machining Centers Rover Multi Up M C S Working Area *: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage *: Y = 1900 mm Axis Travel Ranges *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. AUXILIARY VACUUM SYSTEM – 2 areas Enables clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. Guidance of the workpiece supports via linear guides with recirculating ball carriages. Clamping on the front and rear linear guides using pneumatic cylinders. Clamping is released by a push button mounted on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping. Vacuum modules can be rotated in 15° increments on the module carriers – an ideal solution for shaped parts. — 18 locks for module carriers without template. SA (Set-Up Assistant) Worktable for worktables up to 1550 mm. Supported manual positioning system with travel direction indicator and position indicator. — Sensors on each worktable and along the X axis of the working area. — Display of travel direction and achieved position for the carriage during the positioning phase, mounted on each worktable. The system, according to the worktable programming, suggests to the operator the movement direction of each worktable and carriage, and signals the achieved position with a green LED and beep, with a tolerance of +/- 1.5 mm. Division of the pneumatic system into 2 working areas in X Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Suction hood with 12 NC-controlled positions for electrospindle with 5 axes. Flange for preparation of a 5-axis machining unit for aggregate mounting. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Csdpfx Apjy Ehrxj Ejhd Drilling head BH 24 L Side tool magazine with 12 positions in machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm for tool holder. Hi-Tech Tool Set Complete set of tools for testing acceptance Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital devices for measuring tool length for up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter vacuum cup proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: ex stock 54634 Bitburg – immediately available –

Stanje: novo, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: Frequenzgesteuert Vorschubgeschwindigkeit: 3–12,5 m/min Chjdpfx Ajdmi Niep Eod Gesamtmotorleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querantriebsmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Heben-/Senkmotor: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Tischhöhenverstellung: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg

Leto izdelave: 2010, stanje: dober (rabljeno), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating head and the working area on the machine - Numerical control (CNC) with BIESSE Works software on Windows - Vertical panel positioning with 2 panel clamping vices - Panel feed (in the X-axis direction, on the lower support with rubber rollers), movement of clamping vices (in X-axis) for panel/workpiece fixing WORKPIECE DIMENSIONS (WORKING RANGE): Chjdpshknbrjfx Ap Ejd - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18000 RPM) - No. 1 circular saw (for grooves), 120 mm diameter (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 drilling head for hinge boring - Total installed power: 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Stanje: novo, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1,200 kg Dimensions (LxWxH): Length 2,400 mm, Width/Depth 2,160 mm, Height 2,300 mm Spindle speed: 60–4,200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High rotational accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill - Stepless speed control - Forward/reverse operation for thread cutting - X and Z axes with adjustable 55° dovetail guideways - Y-axis with flat guideway - Drilling-milling head tiltable ±45° Chedpfxed H Hhze Ap Eod - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step (0.04 – 0.15 mm/rev) - Motorized feed in X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant groove - Centralized lubrication - Height-adjustable safety shield with microswitch for optimal operator protection from flying chips and parts - Robust and large cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel distance: X / Y / Z axis 740 mm / 330 mm / 320 mm Dimensions and weights Length: 2,400 mm Width/Depth: 2,160 mm Height: 2,300 mm Weight: 1,200 kg Drilling and milling capacity Max. face mill diameter: 76 mm Max. shank cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Horizontal table Length: 254 mm Width: 1,370 mm Max. vertical spindle-table distance: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0–420 mm Coolant system Coolant pump drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical spindle Overhang: 0–420 mm Spindle mount: ISO 40 DIN 2080 Speed range: 60–4,200 rpm Number of speed ranges: 2 Speed regulation control: mechanically stepless Swivel range milling head X-Y plane: 90° Swivel range milling head Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head travel Z-axis: 470 mm VPE: 1