TOP|Letnik 86|elektro-hidravličen

Scharfberger & Sprödhuber T2 RP

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0618012, Technical data: - Suitable for welding steel, aluminum, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle - 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - FRONIUS water cooling unit - Separate wire feeder case Nodpfx Aaovncubsnslf - Intermediate cable set, device to wire feeder case: 1 m - 4-roller wire feed, steplessly adjustable - MIG/MAG torch, water-cooled, approx. 4 m - Ground cable - Pressure regulator - Mobile chassis - Connection requirements: 400 V / 6.6 A / 8.7 kVA - Footprint approx.: W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Volumetric flow rate: 13,600 m³/h, pressure increase: 3,100 Pa, rotational speed: 1,500 rpm, motor power: 18.5 kW, weight: 790 kg, with STBB HAB S chip container, including complete documentation. Nledpsi A Ix Hefx Aanjf

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints Nsdpfx Ajiidm Nsanslf - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: delavnici obnovljeno (rabljeno), Working width: 3,500 mm Working height: 2,550 mm Number of pressing cylinders: 6 pcs. Loading dimensions (L x W x H): 4,500 x 950 x 2,900 mm Hess Speedy frame press ----- Will be overhauled Max. insertion dimension / pressing length: 3,500 mm Max. insertion dimension / pressing height: 2,550 mm Sliding carriage for width adjustment, locking in 50 mm increments Double-hole raster system Electric height adjustment of long-stroke cylinders (hydraulic) Support plate insertion height can be preselected in 4 positions 3 vertical pressing cylinders, stroke 1,000 mm Pressing force per cylinder: 2,000 kN / 20,000 N 3 horizontal pressing cylinders, stroke 80 mm Pressing force per cylinder: 1,250 kN / 12,500 N Press plate depth: 100 mm, width: 140 mm Raster cylinder fixing / support: 50 mm Central pressure beam with shut-off valve End-of-stroke pressure shutdown and post-pressurization control Control and pressing sequence via push-button operation Nsdpexnqw Tsfx Aanslf Adjustable pressing pressure: min. 25 – max. 160 bar Electrical connection: 2.2 kW / 400V 3 pcs. tilting pressure plates for angled windows 1 pc. tilting pressure plate for pointed windows 1 pc. extension for tilting pressure plate 1 pc. small parts kit Image and video are not original, but show an identical model ----- (Technical data as per manufacturer – no liability assumed!)

Stanje: rabljeno, Weinig Unimat 23 Technical data Working width: 30 - 230 mm Working height: 19 - 200 mm mounted on a pedestal u- re-li-o-u.o Without feed unit machine only The machine is dismantled and immediately available Transport can be arranged Nedpfxoncc Igo Aanjlf

Leto izdelave: 2007, stanje: dober (rabljeno), številka stroja/vozila: 12641207, Offer 23108 Technical specifications: Nlsdpolzif Sjfx Aanjf - Welding current: max. 550 A at 60% duty cycle (ED) - Welding current: 420 A at 100% duty cycle (ED) - Adjustable welding current range: 50 A – 550 A - 3 coarse settings + 12 fine settings - Separate wire feed unit with 4 m intermediate hose package - 4-roller wire feed, infinitely adjustable: 0.5 – 24 m/min - 2-stroke + 4-stroke operation selectable - Water-cooled torch package, approx. 4 meters - Ground cable - Pressure regulator - Connection: 400 V / 64 A - Space requirements: approx. W 550 x H 1310 x D 1050 mm - Weight: approx. 150 kg

Stanje: rabljeno, incl. various slot and tenon discs used, good condition Manufacturer: Festo Type: ZA 101 Machine No.: 2668/S Number of spindles: 3 + cross-cut saw Clamping height: 1 x 140 mm + 2 x 30 mm Cross-cut saw: 2.5 HP Nledpfx Asvwffzsanef Stop ruler LAS 1750 mm + 1000 mm with turret stop Workpiece clamping: pneumatic Space requirements: approx. 1700 mm x 700 mm x 1400 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-is condition, as inspected without warranty or guarantee

Stanje: rabljeno, - Working width (mm): 140 Nledpfx Asrg Exreanof - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top 6th shaft: bottom 7th shaft: universal shaft

Stanje: generalkompletno obnovljen (rabljeno), 6-shaft moulder, with 22 cm feed table and grooved table for processing short pieces. Automatic left spindle: automatically adjusts according to the width of the workpiece. Motor configuration and power ratings: Bottom spindle 5.5 kW Nlodpfxsvhbf Se Aanof Right spindle 4 kW Automatic left spindle 5.5 kW Right spindle 5.5 kW Top spindle 5.5 kW Lower spindle 4 kW Feed motor 4 kW Hydraulic unit for automatic left spindle 0.55 kW

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, premer brusilnega koluta: 125 mm, skupna masa: 520 kg, vrtina vpenjalnega tuleca: 25 mm, hitrost vretena za brušenje: 500 obr/min, moč: 1,1 kW (1,50 KM), vhodni tok: 20 A, vhodna frekvenca: 50 Hz, leto zadnje generalne obnove: 2021, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Grinding diameter - max. 238 - 620 mm Grinding length 190 mm Workpiece length 380 - 940 mm Spindle speeds - stepless 2 - 10,000 rpm Power supply 380 kVA Drive power - grinding motor 1.1 kW Total power requirement 2.2 kW Machine weight approx. 0.6 t !!! We stock almost all spare parts for Deckel S 11 machines !!! !!! Accessories can be configured as desired !!! We will gladly accept your used Deckel S 11 in part exchange - contact us! ATTENTION: We are happy to provide you with a free quotation. However, please understand that we will only process inquiries with a complete address. DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (newly painted) Axial grinding spindle adjustment Accessories: * Machine stand and mounting plate ground * Complete electrical retrofit includes: > new three-phase drive > new brake motor > new frequency inverter > new touch-safe integrated electrics > residual current circuit breaker > EMC cables and cable glands > new protective conductors > new control panel > emergency stop switch * Opto-electronic measuring device with microscope, support arm, parking station, new 2-axis Fagor digital readout and scales, fully mounted and calibrated * Indexing head SK 40 with prism holders and 24-position index plate * Each 1 index plate with 14 and 22 positions * Lead and rear grinding attachment with rack housing * Setting gauge * Complete tooth support * Swivelling support finger * Waldmann LED lamp * Dust extraction device without vacuum unit * Universal setting gauge * 10 direct collets SK 40: 6/8/10/12/14/16/18/20/22/25 mm * Collet sleeve with ejector nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm in 0.5 mm steps * Each 1 taper reducing sleeve SK 40 x MK 1/2/3/4 * 3 grinding wheel holders L 48, 35 mm * Protective hood * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for cabinet * Operating keys, operating instructions, spare parts list, wiring diagram * Machine and accessories completely overhauled and supplied with electrical test certificate! Nodpfx Asw U Ehzeanelf * 12 months warranty (domestic)