Pridobivanje čipov

Höcker Polytechnik K 40/400

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), vhodna napetost: 400 V, vhodni tok: 16 A, vrsta vhodnega toka: trifazni, volumenski pretok: 6.000 m³/h, premer sesalne cevi: 300 mm, skupna višina: 2.000 mm, skupna dolžina: 3.100 mm, skupna širina: 900 mm, skupna masa: 925 kg, priključek za stisnjen zrak: 6 letvica, nazivni pretok: 5.100 m³/h, negativen tlak: 2.700 Pa, Tehnični podatki: Sesalni nastavek, premer (D) = 300 mm Vsebnost ostankov prahu < 0,1 mg/m³ H3 Površina filtra 28 m² Čiščenje s stisnjenim zrakom Volumski pretok 6000 m³/h Podtlak 2500 Pa Nivo zvočnega tlaka 72 dB(A) Hsdpfxsyi Efcj Ah Tjfn Motor ventilatorja 7,5 kW, 400 V, 50 Hz Način delovanja: neprekinjeno Volumen posode za zbiranje ostankov 3 x 165 l Teža pribl. 1000 kg Dimenzije (D x Š x V v mm) 3070 x 900 x 1950 Obseg dobave: - Ohišje, odporno na udare s tlakom nad 200 mbar, - podvozje, - 3 posode za zbiranje pri modelu SMU 6000.1, - ločevalnik z filtrom, - modul ventilatorja z izpustnim kanalom, - čiščenje s stisnjenim zrakom ali vibracijsko čiščenje, - ohišje z glavnim stikalom, motorjem in avtomatskim zagonom, - vgrajen avtomatski sistem za gašenje, - avtomatski sprožilec za čiščenje in vgrajen nadzor filtra z opozorilno lučko, - 5 m priključni kabel s 32 A CEE vtičnico, - vtič za napravo z stikalom za preklop faz, vključno s frekvenčnim pretvornikom. preverjeno v delavnici

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, obratovalne ure: 3.432 h, Funkcionalnost: popolnoma funkcionalen, pritisk: 13 letvica, obratovalni tlak: 13 letvica, Naprodaj je Jumag parni kotel z plinskim gorilnikom Tip C 600 Parna zmogljivost: 600 kg/h. Maksimalni parni tlak: 13 bar. Kot nov, samo 3432 delovnih ur. Dostava za doplačilo. Hfsdpeydq Nijfx Ah Ton Za vprašanja smo na voljo.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2025, 1) Roundwood handling yard with 10 boxes (discharge boxes) – New and used New roundwood infeed and sorting line Feed speed 50 m/min. Includes the following used components: - Cross conveyor infeed step feeder, new - Log transfer carriage, used - Log transfer carriage with ejector, used - Cambio 50 debarker, used - Slab scanner with belt, used - Measuring zone and sorting log transfer carriage Including debarking; inspection and painting; including roundwood infeed. Excluding boxes, cladding, measuring system, outfeed control, and control cabinet. Root reduction included. 2) Roundwood infeed for chipper line Heavy-duty roundwood cross conveyor, NEW - 4-strand roundwood cross conveyor - Axle spacing: 7.5 m - Overall length: 8.0 m - Drive shaft diameter: 100 mm - Chain: bushing conveyor chain, pitch 100 mm – heavy-duty design - Fixed end stops at the rear, without cladding - Steel substructure: HEB 200, installation height: 1000 mm - Drive: geared motor 7.5 kW 3) Log alignment conveyor (Entzerrer) NEW - Number of chains: 4 Hjdpfx Aoykr Aqsh Tofn - Axle spacing: 3,500 mm - Overall width: 5,730 mm - Lug spacing: 1,000 mm - Drive shaft diameter: 100 mm - SEW drive: 7.5 kW - Speed: 10 m/min - Version: completely clad between chain tracks 4) Step feeder, NEW - Number of feed steps: 4 - Width: 4,200 mm - Plate thickness (movable steps): 12 mm; (fixed steps): 20 mm - SEW drive: 18.5 kW - Drive via crank mechanism and geared motor 5) Chipper line (Make: WD) Log transfer carriage before RB 2 infeed Length to be extended to 18.5 m – with drive and return station RB 2 infeed: - Driven chain bed with steel enclosure, designed for side feed of logs - Conveyor chain with carriers, welded frame structure Infeed & centering unit ZE - With log rotation device (TDV) and centering unit - Infeed unit ZE - Log length: 2.5 – 5 m - Minimum clear width: 80 mm - Maximum clear width: 780 mm - Installation height: 1,000 mm - Weight: 5,400 kg Profile chipper FZ 3 - Machine frame with base - 2 knife head housings with main bearing - 2 knife heads with finishing segments - Drive power: 90 kW - Roundwood diameter: min. 100 mm / max. 400 mm - Chipping height above chain: max. 515 mm - Distance between discs: max. 570 mm / min. 60 mm - Disc diameter: 1,260 mm - Positioning by electric motors 2 hydraulic power units, 35 kW each, for pre- and post-cutting Cant turning device for pre-cut Electrically driven roller conveyor TR 800 Centering and infeed unit ZE with FZ 3 chipper

Stanje: rabljeno, Double edger TRAK-MET PTF2-4, year 2022, like new, feed rate 0.40 m/min, incl. laser, 15 kW, 2 blades, 1150 kg Hfsdpfxevr I H Do Ah Ton Prices subject to change without notice. Errors and misprints excepted.

Stanje: potreben popravila (rabljeno), Funkcionalnost: nepreverjeno, Naprava za obdelavo lesnih paketov s kliničastimi rezili dimter HK 400, naprava za obdelavo lesnih paketov s kliničastimi rezili Dolžina vhoda: 800–6000 mm Višina rezkala: 285 mm, opcijsko 300 mm Barva: modra Sestav: Poz. 01: Naprava za pakiranje Poz. 02: Transportni valjčni sistem za pakete Hfjdpsvi Hw Nofx Ah Ten Poz. 03: Osrednje rezalo Poz. 04: Transportni valjčni sistem za pakete Poz. 05: Naprava za ločevanje paketov Poz. 06: Verižni prečni transporter Poz. 07: Transportni valjčni sistem za dovajanje Poz. 08: Taktna stiskalnica Poz. 09: Enota za napajanje Poz. 10: Krožna žaga za rezanje Vključno s krmilnimi omaricami in upravljalnimi ploščami Naprava potrebuje popravilo in se prodaja v trenutnem stanju. Že je bila razstavljena in je shranjena v Achernu. Vsa tehnična dokumentacija je na voljo. Za vprašanja o napravi in tehnične informacije smo vam na voljo kadar koli. Pri popravilu in ponovni montaži vam bomo svetovali.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additional machine features: Hfedpouiy Hrofx Ah Tjn - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 1300mm/1100mm/1000mm, table size X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Spindle speed: 7000rpm, spindle power: 50HP, tool magazine: 80. Dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. An on-site inspection is possible. Hjdpstx Dn Uefx Ah Tefn

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 5 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Dolžina poravnalne mize: 2500 mm Pogonski motor podajalnika: 4 kW Hitrost podajanja: 5–30 m/min Krmiljenje: spominska funkcija Weinig Powermat 400 s HSK/Powerlock, CNC-osno/radialno krmiljenje ----- Stroj je trenutno pri nas v postopku obnove! Slike pred demontažo in trenutno v procesu obnove! Kratek povzetek: ----- Hfodpfxsyy A Iqj Ah Tsn - 5 vreten s 8.000 obr/min - 4 x HSK/Powerlock - CNC-nastavitve vreten v osni in radialni smeri preko krmiljenja - CNC-krmiljena nastavitev in pozicioniranje podajalnika - Mizne plošče z vodilnim nožem pri vretenih 2 in 3 - Vključno s povratnim sistemom Weinig/Neumann RF 15 Podroben opis: ----- Tehnični podatki: Delovna širina: 20–230 mm Delovna višina: 8–120 mm 1. Nastavek za orodje – spodaj ----- Motor z zavoro: 5,5 kW Premer vretena: 40 mm Obratov: 6.000 obr/min Krog gibanja noža: 93–145 mm Nastavitev osi: 5 mm Zaoplitvena enota MarathonCoatin za mizno vlogo pred 1. spodnjim nastavkom za orodje 2. Nastavek za orodje – PowerLock – desno ----- Motor z zavoro: 7,5 kW Skupni motor z levim nastavkom za orodje Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. premer orodja za ravnilno mejo: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno osno CNC-krmiljeno Mizne plošče z vodilnim nožem 3. Nastavek za orodje – PowerLock – levo ----- Motor z zavoro: skupni motor z 2. vretenom Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno CNC-krmiljeno v osni in radialni smeri Mizne plošče z vodilnim nožem 4. Nastavek za orodje – PowerLock – zgoraj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Krog gibanja za ravne rezilne glave maks.: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 40 mm Deljena pritisna noga pred zgornjim nastavkom za orodje, nastavljiva po krogu gibanja orodja in zložljiva, vzmetena. Pritisna noga pred in odvod po zgornjem nastavku z elektronskimi digitalnimi prikazi, integrirani v spominsko funkcijo Vreteno radialno CNC-krmiljeno 5. Nastavek za orodje – PowerLock – spodaj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Maks. globina profiliranja: 15 mm Nastavitev osi: 35 mm Podajalni sistem ----- Frekvenčno krmiljen podajalnik, brezstopenjsko nastavljiv z zavoro: 4 kW, 5–30 m/min Vlečni valj pred 1. spodnjim orodjem pnevmatsko dvig/nizko krmiljen Durofer valji s koničastimi zobmi (Weinig patent) z omejevalnikom globine in samoočiščevalnimi...

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Hedpfx Aheuiy Ngs Tsfn Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Stanje: novo, Leto izdelave: 2022, Premeri: 40–140 mm Motor: 2,2 kW Cena za 1 kos. Hsdedprvuspfx Ah Tsfn