Popolna pivovarna

SALM, Wien

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Njdpfsvwlqqsx Abbjcl Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: rabljeno, Leto izdelave: 1988, Krmiljenje Grundig x-hod 700 mm y-hod 500 mm z-hod 400 mm Teža stroja cca 2,8 t Nedsiqu S Eopfx Abbocl +++++ Upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka ni mogoča. Naš oglas vsebuje tudi najbolj informativne fotografije v najboljši možni kakovosti. Pošiljanje dodatnih fotografij žal ni mogoče. +++++

Leto izdelave: 2006, Stanje: rabljeno, Ultrasonic and Electrolytic Cleaning, Wire Cleaning Line, Wire Cleaning System, Wire Treatment System Manufacturer: Sirio-Wire Model: M0209 Number of wires/strands: 12 (6+6) Wire diameter: 1.0 – 5.5 mm; however, even thicker wires have been processed on the system with very satisfactory cleaning results. Year of manufacture: 2006 Ncodpfxof Nku Rj Abbjl The system was operated for only around three years before production was relocated to another site. Process: Ultrasonic and electrolytic cleaning in hot bath A detailed description of the process can be found on the manufacturer’s website (siriowire) under 'Ultrasonic and Electrolytic Cleaning.' The system is in good, operational condition and is complete except for the pumps. In the photos, the operator catwalk and the collection tray that the system sits in are missing; these photos will be added shortly. The last three images show systems of this type in operation.

Stanje: novo, Wash Plant WA LC40 with Raetz Mill RM40 for Pack Press 100P2 rotary operation Rated capacity up to 2000 kg/h Ncsdjb Ncb Nepfx Abbjl Motor power 6.2 (8.5) kW (HP) Electrical connection 400V 50Hz (3 phase) Electrical fuse protection 16 A Length 2000 mm Width 700 mm Height 2200 mm Feed height 800 mm Weight 285 kg Material 1.4301 / AISI 304 Cleaning connection 1/2" internal Washing tank connection 2" external Pulp discharge height 1260 mm Fruit discharge height 800 mm Scope of delivery: 12 mm cutting screen

Stanje: novo, Leto izdelave: 2025, 150 ltr. insulated tank with 13.5 kW / 400 V heater featuring automatic temperature cut-off, frame, and bag-in-box filling unit with bag holder * Simple, safe, excellent value for money Ncjdpjt U H Nrefx Abbol * No temperature fluctuations * Exceptionally gentle heating thanks to large heating surface (0.4 m²) * With thermostat: switches off at set temperature * Height-adjustable stainless steel frame – tank drains completely "Leisure time" during heat-up: approx. 40 min for 150 ltr. Hourly output approx. 150 ltr. Also available with 18 kW / 400 V heater – hourly output 180 ltr. Two-station bottle filling available No 400V connection available? Tank pasteurizer is also available with gas-fired condensing boiler. ##### RINK – pasteurization systems for over 30 years Proven technology – more than 500 units in customer use

Leto izdelave: 2025, Stanje: novo, The LITech hammer mills HM 120 / 200 / 300 / 400 are ideally suited for the pre-crushing of medium-hard, tough, and brittle materials such as soils, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals, and many more! Nedpfx Asg Ay Dhobbecl

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: nepreverjeno, skupna masa: 18.000 kg, moč: 250 kW (339,91 KM), Za kosovni odpad, palete, ostanke lesa itd. Enovretenski rezalnik z elektrohidravličnim pogonom Širina rotorja: 2500 mm Premer rotorja: cca 500 mm Elektromotor: 250 kW Ncsdpeq I Rkdofx Abbjl

Stanje: kot nova (razstavni stroj), Centrifugal pump Alfa-Laval Njdpshryyhjfx Abbscl Material: Stainless steel Medium: Fruit concentrate/fruit juice Flow rate: 20,000 l/h Delivery head: approx. 25 m Power: approx. 3 kW Speed: approx. 2,900 rpm Inlet/Outlet: DN50 1 stainless steel tank, vertical, cylindrical, closed 1 stainless steel base frame for pump and tank

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Kompaktni drobilnik tip PYTHON-XL 1600, s 15 kW elektromotorjem, 400V 50Hz • Elektromotorni reduktor 15 kW, 400 V, 3 faze, 50 Hz 40 % večji navor v primerjavi s standardnim modelom PYTHON 1600 Njdpfx Aef N Nlgobbecl • Vhodna odprtina: 1600 x 1000 mm • Glavne dimenzije (D x Š x V): 2700 x 1400 x 2600 mm • Odprtina za izmet: 400 x 100 mm • Višina izmetne odprtine: cca 1000 mm • Električna krmilna omara z INVERTERJEM, glavnim stikalom, preklopnim stikalom (vklop/izklop) in varnostnim izklopom • Enostavno premikanje s pomočjo viličarja ali s transportnimi očesi • Teža: cca 2700 kg • Obsežna dokumentacija stroja/priročnik • Površinska zaščita v barvah RAL 3002 in RAL 7022 • (Pridržujemo si pravico do tehničnih sprememb) • CE certificirano in "Made in Holland"

Stanje: rabljeno, Leto izdelave: 1985, Swing diameter over bed: 810 mm Maximum swing diameter over cross slide: 560 mm Distance between centers: 00 mm Bed width: 480 mm Cross slide travel: 400 mm Top slide travel: 180 mm Turning tool shank cross-section: 32 x 25 mm Drive power: 22 kW Spindle torque: 30 Nm Spindle nose size: 11, DIN 55027 Spindle diameter at front bearing: 152.4 mm Spindle bore: 106 mm Speed range: 9 - 1800 rpm Nodpfx Abjxn Ty Rsbocl Number of speeds: 24 Longitudinal feed: 0.092 - mm/rev Cross feed: 0.046 - mm/rev Metric threads: 0.5 - 112 mm Inch threads: 1/4 - 56 TPI (G/1") Thread module: mm Thread DP: 1 - 224 pitch Tailstock quill diameter: 115 mm Quill stroke: 225 mm Quill taper: MK 6 Workpiece weight between centers, max.: 00 kg Workpiece weight, max. (unsupported): 750 kg Röhm 3-jaw chuck, Ø ... Machine dimensions approx.: 4600 x 1900 x 1600 mm Weight approx.: 4300 kg Number of feed and thread pitches: 99 Distance between centers: 00 mm Accessories: - 3-axis digital readout - Mobile chip guard along the entire length (plexiglass) - Coolant system - Rapid traverse in Z and X axes - Multifix toolholder, size C, with 6 interchangeable cartridges - Bed stop with micrometer adjustment - Fixed steady rest - 300 mm - Taper sleeve for main spindle MK 6 - Live center (cone center) MK 6 Bed guideways in very good condition!