Obdelovalni center

Robland BM 3000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Axis 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed rate 20 m/min A-axis 360 degrees Minimum Dimensions: Sheet: x = 300 mm y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade operates in the X direction Max. depth with saw blade: 10 mm Motor 0.75 HP, 400 Volt Required extraction capacity: 2300 m3/h Nedpfxsfmdcqj Abiolg Location: arriving at warehouse 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 24 h, Funkcionalnost: popolnoma funkcionalen, Serija DOLFİN-PYM2 naprav za pranje delov so industrijske naprave za čiščenje delov, ki se uporabljajo pred in po reviziji, zlasti v servisih za popravila in vzdrževanje. Deli, ki so nameščeni v napravo, se vrtijo okoli lastne osi s pomočjo košare za pranje, medtem ko se pod pritiskom razpršuje vroča voda z detergentom. S kombinacijo pritiska, temperature in kemičnega učinka se z dela odstranijo vse maščobe in nečistoče. Ker pralni stroji Dolfin delujejo v zaprti zanki, se pri vsakem pranju ne uporablja nova voda ali detergent. Isto posodo za več ciklov uporablja ista tekočina, pri čemer vsi ostanki umazanije ostanejo v pralnem prostoru. Ta lastnost ščiti okolje in zaposlene. Zaradi visoke učinkovitosti in zmogljivosti prihrani energijo, vodo in delo. Njdpfx Ajv Sa I Tsbislg Deluje avtomatsko v skladu z vnaprej nastavljenimi temperaturnimi in časovnimi vrednostmi. Za nalaganje, predvsem težjih predmetov v košaro oziroma njihovo odstranjevanje iz košare, se košara lahko postavi na transportni voziček, kar pomeni, da jo je mogoče po potrebi odstraniti iz naprave. S pomočjo vozička jo je mogoče enostavno prenesti na katerikoli del delavnice.

Stanje: novo, Leto izdelave: 2026, Robland products are manufactured by Landuyt N.V., headquartered in Bruges, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • Left drill bit 5 mm for creating row drill holes • 20 mm drill bit for the installation of Minifix systems • 8 mm milling cutter for limited drilling and milling applications • 35 mm drill bit for hinges • The panel thickness that can be processed is 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis range: - Drilling: 920 mm - Sawing: 860 mm • X-axis support: 3000 mm • Z-axis (panel thickness): 12 mm to 40 mm • A-axis rotation: 360° • Feed speed: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum drill hole diameters: 3 mm – 35 mm • The saw moves along the X-axis Nlsdpfod Hz Niox Abijg • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 HP, 3x 400V/ 3x 230V • Minimum required extraction capacity: 2300 m³/h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, višina obdelovanca (maks.): 30 mm, TEHNIČNE PODROBNOSTI Os: 920 mm Os X: 3.000 mm Os A: 360° Debelina materiala (os Z): 12 mm – 30 mm Hitrost podajanja: 20 m/min Najmanjše dimenzije (plošča): X: 300 mm Y: 120 mm Z: 12 mm Največji/najmanjši premer luknje: 3 mm – 35 mm Največja globina reza z žago: 10 mm PODROBNOSTI O STROJU Moč motorja: 0,75 KM Napetost: 400 V Potrebna moč sesalnega sistema: 2.300 m³/h OPREMA Vrtalna glava s 4 pozicijami Nledpfxozkt A Ro Abisg Žaga v smeri osi X

Stanje: rabljeno, Leto izdelave: 2007, premer vretena: 45 mm, število vreten: 6, Št. 3176 Strugalni in žlebni avtomat WEINIG Hydromat 1000 Rabljen, letnik 2007, stroj že razstavljen 6 vreten: spodaj – desno – levo – zgoraj – zgoraj – spodaj Elektronski pomik 6–60 m/min Delovna širina 80–150 mm Delovna višina 23–65 mm Končna širina letev 4–15 mm Maks. število letev 16 kosov Dolžina letev 400–4000 mm 1. Vreteno horizontalno, spodaj Zavorni motor 11 kW, 6000 vrt/min Premer vretena 45 mm Krožni radij orodja 125–180 mm 2. Vreteno vertikalno, desno Zavorni motor 7,5 kW, 6000 vrt/min Premer 45 mm Krožni radij orodja 112–250 mm Maks. globina žleba 35 mm Hod nastavitve osno 80 mm 3. Vreteno vertikalno, levo 7,5 kW, 6000 vrt/min Premer 45 mm Krožni radij orodja 112–250 mm Maks. globina žleba 35 mm Hod nastavitve osno 80 mm Tlačna plošča pred vretenom, možnost odmaknitve, pnevmatični pritisk valja 4. Vreteno horizontalno, zgoraj 15 kW, 6000 vrt/min, premer 45 mm Krožni radij orodja 112–250 mm Maks. globina žleba 35 mm Hod nastavitve osno 45 mm Razdeljena tlačna plošča pred zgornjim vretenom, nastavljiva in možnost odmaknitve, pnevmatična 5. Vreteno horizontalno, zgoraj, kot žagnopilno vreteno Zavorni motor 37 kW, 5000 vrt/min Premer 45 mm Hod nastavitve osno, zmanjšan na 25 mm Krožni radij orodja 112–250 mm Maks. globina žaganja 35 mm Hod nastavitve osno 45 mm Razdeljena tlačna plošča pred zgornjim vretenom, nastavljiva in možnost odmaknitve, pnevmatična 6. Vreteno horizontalno, spodaj, kot žagnopilno vreteno Zavorni motor 30 kW, 5000 vrt/min Hod nastavitve osno, zmanjšan na 25 mm Premer 45 mm Nljdpfx Abju Agh Seieg Krožni radij orodja 112–250 mm Maks. globina žaganja 35 mm Hod nastavitve osno 45 mm Vsa žlebna vretena z visokokakovostnimi ležaji Elektronski pomik 7,5 kW Hod nastavitve valjev glede na levo vreteno, osno 35 mm Skrajšana razdalja med valji glede na desna vretena Števec dolžine, električni, z 2 števcema Kratka vstopna miza (1,2 m) z 2 pogonjenima valjema nad mizo 1 pogonjen, nazobčen valj v mizi, stranski pritiskovalni valj Avtomatska črpalka za vosek/sredstvo za mazanje Stroj z 4-valjnim izmetom, nihajne gredi podaljšane na 200 mm 2 pogonjena, nazobčena valja v izmetni mizi 2 pogonjena, nazobčena valja v strojni mizi Tlačna palica pred zgornjim vretenom in odvod za zgornjim vretenom z mehanskim digitalnim prikazovalnikom DigiSet (digitalni dvojni prikazovalnik) za levo in zgornje vreteno Električna nastavitev višine zgornjih vreten in pomika Prodaja v imenu stranke, na lokaciji v bližini 39100 Bolzano (Italija), brez razstavljanja, brez transporta in montaže Razstavljanje, natovarjanje in transport možni po dogovoru Napaka v opisu in ceni pridržana Za izognitev možnim nesporazumom je predhodni ogled na lokaciji po dogovoru možen in priporočljiv Prodaja se v obstoječem stanju Tehnične specifikacije, opis stanja, leto izdelave in obseg dobave v skladu s prospektom proizvajalca oz. prejšnjega lastnika, brez jamstva Medtem se prodaja pridržana Pri rabljenih strojih je izključeno vsakršno jamstvo, velja: „kupljeno kot videno“ Slike in videoposnetki so namenjeni kot primer in ne predstavljajo dejanskega obsega dobave Pogoji plačila: Cene so brez DDV, plačilo pred prevzemom oz. pošiljko Pogoji dostave: na lokaciji

Stanje: novo, Leto izdelave: 2026, Y-axis drilling: 920 mm Y-axis sawing: 860 mm X-axis: 3000 mm Z-axis: 12 mm - 40 mm A-axis: 360° Min. panel dimensions: (X) 300 mm x (Y) 120 mm x (Z) 12 mm Feed speed: 20 m/min Drill diameters: 5 mm / 20 mm / 35 mm Milling tool: 8 mm Grooving saw: 90 mm x 3.5 mm Maximum groove depth with saw blade: 10 mm Min. hole diameter: 3 mm Max. hole diameter: 35 mm Motor power: 1.3 kW Nlodpfx Abjl D Rw Ejijg Weight: 500 kg

Stanje: rabljeno, Panel saw and spindle moulder Robland NLX1700, very good condition, 2 x 3 kW motors, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Price subject to change. Errors, misprints, and omissions excepted. Nljdpfx Abswzzh Eoisg

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Nlsdpfx Aovwbp Asbiog

Leto izdelave: 2014, stanje: potreben popravila (rabljeno), Funkcionalnost: popolnoma funkcionalen, The machine has been out of use for several years and therefore requires maintenance before being put into operation, which will be the responsibility of the buyer. Njdjtu U Ebopfx Abielg

Stanje: rabljeno, Leto izdelave: 2005, moč: 7,5 kW (10,20 KM), največja višina reza: 170 mm, največja širina rezanja: 1.100 mm, premer žaginega lista: 500 mm, nastavitev nagiba žaginega lista: 46 °, vrsta nastavitve višine: hidravlični, izvrtina žagine plošče: 30 mm, največja hitrost vrtenja: 5.500 obr/min, vrtljajska hitrost (min.): 2.800 obr/min, skupna dolžina: 3.300 mm, skupna širina: 2.000 mm, skupna višina: 1.800 mm, skupna masa: 1.500 kg, Oprema: CE označba, No. 04528 Sliding Table Panel Saw Martin T 73 BASIC Used, Year of Manufacture: 2005 Sliding table: 3000 mm Maximum cutting height: 170 mm Maximum saw blade diameter: 500 mm Saw blade bore: 30 mm Cutting width: 1100 mm Motor: 7.5 kW Speeds: 2800 / 4000 / 5500 rpm Hydraulic saw blade tilting: 0° - 46° Hydraulic cutting height adjustment Lowerable rip fence Pneumatic saw shaft lock Crosscut table with fixed angle settings Length stop extendable up to 3300 mm Sliding table with infinitely variable locking Integrated contact for extraction system activation Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm (LxWxH) Nodoyymtdopfx Abijlg Weight approx. 1500 kg To avoid possible misunderstandings, on-site inspection after prior arrangement is possible and recommended. Sale in as-is condition. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: 'sold as seen.' Payment terms: Prices plus statutory VAT, payment before collection or shipping. Delivery terms: ex stock.