Kopiranje usmerjevalnika

Reichenbacher RMF

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, 1 overhauled Paul flitch separator, 2-lamella design, right: fixed lamella, left: movable lamella (for a left-hand machine) total length: 5.50 m total width: 850 mm roller pitch: 500 mm roller width: 790 mm for max. wood length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. Fpsdetx A Sxepfx Abvsd 11 rollers removed and fitted with new ball bearings. Movable lamella mounted on 4 ball-bearing-supported guides, easy to move, with new roller chain and 11 new return pulleys. Robust sheet metal lining between all rollers. As new condition.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rezkalnik za les, ostanki žagovine LINDNER tip T 400/140-2 – po tehničnem pregledu – zelo dobro stanje – za tehnološke sekance TEHNIČNE SPECIFIKACIJE: širina vhoda: 400 mm višina vhoda: 140 mm premer rotorja: 450 mm dolžina rotorja: 400 mm moč glavnega motorja: 33 kW moč motorjev za podajanje: 2 x 1,5 kW število nožev: 2 kosa sito dimenzij: 60 mm x 90 mm Fsdpfx Asr Ak Rgobvjpd podajalni valji v zelo dobrem stanju moč motorja podajalnika: 1,5 kW dolžina podajalnika: 4200 mm transportne mere (d/š/v): 430 / 240 / 150 cm teža: cca 2000 kg

Stanje: dober (rabljeno), Throughfeed line for processing door leaves, high-performance machine, processing of one leaf—lock case, handle, and hinges—in approximately 30 seconds. Fjdpfsuq Scpex Abvopd The machine consists of two units, each with a left and right section performing specific operations. In the first unit, the left section mills the faceplate recess for the lock and drills holes for the handle and key; simultaneously, the right section drills the hinge holes. In the second unit, the left section makes and deepens the lock pocket, while at the same time the right section installs the hinges.

Stanje: skoraj kot novo (rabljeno), Krožna žaga za hlode, za premer do 1100 mm Fpjdpfxsi Ek Hps Abvjd

Stanje: dober (rabljeno), Leto izdelave: 1973, Weinig Planing Machine 4-sider / U250 / Unimat 250 Planing width: 250 mm Planing height: 120 mm Bottom spindle 7.5 kW Right spindle 5.5 kW Left spindle 7.5 kW Right spindle 7.5 kW Top spindle 7.5 kW Bottom spindle 7.5 kW Saw unit spindle 7.5 kW Includes planing heads Fpjdpforigq Sex Abved Includes milling tools Includes knives Includes all accessories Good condition - immediately available Location: Austria, near Sankt Pölten

Stanje: zelo dobro (rabljeno), Height: approx. 2000-4500 mm Width: approx. 1130 mm Usable depth: 1 x 1000 mm Upright load capacity: up to 3000 kg Arm load capacity: up to 500 kg 6 storage levels including base Single-sided design Bolted base profiles Made from hot-rolled IPE sections Finish: high-quality industrial paint RAL 5010 Cantilever arms freely adjustable in 100 mm increments Racking uprights: base and cantilever arms bolted Increase in storage capacity with reduced floor space Organized storage of long goods Price: €400/net per upright, incl. We will assemble your custom racking system. Feel free to contact us. We also buy used racking. Please send photos and dimensions—we’ll make you an offer. Contact: Brennholz Blum - Mr. Dominik Blum Fpsdpfxop Dukqj Abved Upon request, we can also deliver your racking. If you have any questions, just call or write us.

Leto izdelave: 1998, stanje: rabljeno, CNC COPY BAND SAW MZ MOD. UNIDUE 013 CNC - USED - NUM control system - 3 CNC axes - Cutting section: 1300x800 x h 100 mm - Cutting angle: -/+ 90° Fpjdpfx Abjimwtrsvod - Wheel diameter: 900 mm - Voltage: 380V/50Hz - Serial no.: 06 - CE certified (year 1998)

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for processing wood, plastic, and aluminum. Gantry design machine with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical specifications: CNC control BWO Vektor 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (top edge of vacuum cups) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum cups) A-axis: 540° (rotary axis), B-axis: 196° (swivel axis +/- 98°) Rapid traverse speed: X/Y axis 45 m/min, Z axis 15 m/min, A/B axis 10,000°/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, max. power 12.5 kW, steplessly adjustable speed up to 17,000 rpm, milling spindle water-cooled. - 1 CNC height-adjustable chip collection system with lamellar curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 2 chain tool magazines with 32 positions each for tools up to D = 90 mm, with sorted storage up to max. 160 mm (three positions required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for stops "raise/lower" - 2 control circuits for pneumatics "clamp/release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 2 stepped separating devices, lift approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor integrated into the base frame for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! Vacuum supply: - 1 vacuum pump including a 250-liter tank for rapid vacuum build-up. - approx. 20 vacuum supports with various suction plates. - 4 stops raise/lower for positioning components. Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser. Occupational safety: - Traveling safety cabin with safety bumpers. Fedpfx Absvmpx Rovspd Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axes to a new generation of drives (digital). - New energy chains for Y / X / Z axes. - Complete rewiring, all power and measuring system cables replaced. - All guide carriages replaced. - Z-axis ball screw and guide rails new. - X-axis guide rail new. - Control system conversion to BWO Vektor 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 tool magazines + tool changers overhauled. - Swivel extraction unit overhauled. Software: - It is possible to include a current version of the COMPASS stair construction software. Compass is the leading provider for planning and manufacturing of wooden staircases.

Leto izdelave: 2015, stanje: generalkompletno obnovljen (rabljeno), Laboratory gas generator with a capacity of 12.5 liters/min and a residual oxygen content of 0.5%. The unit has been completely overhauled by us, Airtech Stickstoff GmbH, as an authorized partner of Parker. We can also handle the servicing for you. Fsdpfjn R Nauox Abvjpd

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, MAKA ECM 27 R Year of manufacture: 1998 • High-performance CNC machining center for 5-axis operations, ideal for aluminum processing and mold making. • MAKA ECM 27 R in portal design. • Equipped with automatic central lubrication system and control cabinet with air-conditioning unit. • CNC control BWO 900C, 1 MB memory, integrated PC. • Portable control panel BWO RC 910. Technical data: Working areas / working envelope (cube): With tool length 130 mm and Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm (with fixture height 170 mm) A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y axis: 40 m/min Z axis: 15 m/min A/B axis: 10,000 °/min 1 pc. milling spindle 11 kW, Variable spindle speed from 2,000 – 17,000 rpm, Fpedpfxet Dl U Es Abvod With ceramic bearings and liquid cooling. Tool holder SK 40 with automatic tool changer. 1 pc. chain-type tool magazine for 12 tools up to Ø 160 mm, including 2 positions for angular drilling heads (fixed-position coded), SK40. 1 pc. steel surface table 3,000 x 2,250 mm with T-slots. 1 pc. vacuum pump approx. 140 m³/h, with 250-liter tank. 1 pc. vacuum clamping circuit. Work safety: With safety enclosure for the rear of the machine, side access door, cabin open at the top. Lamella curtain on operator side and safety bumper on the front of the table. Repairs / refurbishment before delivery: - Maintenance. Electrical connection values: Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz Rated power: 22.5 kW Use of an RCD protective device in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 10 m³/h No tool holders and machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee. Optional: Including installation and commissioning with handover ready for production!