Kompakten in pameten sušilni sistem za les

INCOPLAN EASYPLAN

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Proizvajalec - OMES Kapaciteta - 1400 palet/izmeno Leto - 2002 Linija je trenutno razstavljena Ijdswwiv Ajpfx Al Notf

Stanje: rabljeno, številka stroja/vozila: 008381, Delovno območje os X: 4250 mm Iedpfsx Swc Hex Al Njtf Delovno območje os Y: 2280 mm Delovna površina: nesting miza Moč glavnega vretena: 12 kW Št. krmiljenih osi: 5 osi Št. vrtalnih vreten: 11 Št. mest za orodja: 24

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Holtec sortirni blokovni vlak tip SBZ. Dolžina 94,5 m. 52 zaboji. Itsdpfxjw Ug Agj Al Nef

Stanje: novo, Leto izdelave: 2026, Front-opening sandblasting cabin is a major convenience when processing large and heavy workpieces. Telescopic actuators installed in the door facilitate opening. The sandblaster is equipped as standard with an integrated dust extraction system for dust generated during sandblasting. It is supplied with a set of nozzles, sandblasting gun, and protective stickers for the viewing window. Itodpfx Alsm Nccxe Nef Machine Description Dust-free operation is ensured thanks to the use of peripheral seals, allowing environmentally friendly working. The sandblasting hose is placed at the bottom of the collection container. A drain hole allows for quick change of blasting media. The sandblaster is used for cleaning and processing various types of surfaces, e.g. rust, paint, and deposits removal from metal surfaces such as automotive parts, engines, fittings, housings, wheels, rims, etc. As abrasive media you can use quartz, silicon carbide, glass beads, plastic sand, emery, and other materials. Technical parameters KDP450TOP CAPACITY: 450 L (0.45 m3) AIR CONSUMPTION: 400 – 1000 l/min OPERATING PRESSURE: 4 – 8 BAR AIR CONNECTION: QUICK COUPLER 1/4" (INCH) VIEWING AREA: 580 x 270 mm EXTRACTION CONNECTION (VENT): Ø 64 mm and 90 mm INTERNAL CABIN DIMENSIONS (W x D x H minimum/maximum): 1140 x 650 x 630 mm DIMENSIONS: 1260 x 1000 x 1600 mm WEIGHT: 105 kg Standard Equipment Cyclone extraction unit DC15 Work area lighting – 12 V fluorescent lamp with 230 V power supply and switch 2 high-quality rubber work gloves integrated with the unit 2 extraction (vent) connectors, Ø 64 mm and 90 mm, allowing connection of extraction device Sandblasting gun with four interchangeable ceramic nozzles 4 replaceable protective films for the window/viewer Front door with rubber peripheral gaskets for dust-free operation Manual in Polish Please note that the unit requires self-assembly. The listed price is NET (VAT excluded). Price does not include shipping costs. For more information, please contact us by phone or email. You are welcome to see our offer on our website.

Stanje: novo, Airplan — Kit di essiccazione modulare per legno e pallet Descrizione breve Airplan è la soluzione più semplice ed economica per essiccare legno, in particolare legno tenero. Si tratta di un kit pronto all’installazione, progettato per essere montato all’interno di una struttura realizzata dall’utente (secondo il disegno che forniamo), fino a 25 metri cubi. Con Airplan riduci al minimo l’investimento pur ottenendo un’essiccazione precisa e professionale per tavolame o pallet. Itedpfx Ajxnbctol Nsf Descrizione prodotto Airplan è un kit completo di essiccazione che include tutto il necessario per trasformare un semplice ricovero in una camera di essiccazione professionale per il legno. Forniamo il disegno costruttivo, tu realizzi la struttura, installi il nostro kit — e sei pronto per essiccare. Componenti principali - 3 ventilatori assiali industriali per la circolazione controllata dell’aria - Kit di resistenze elettriche per riscaldamento affidabile - 2 serrande automatiche per ottimizzare il ricambio d’aria e la regolazione dell’umidità - Quadro elettrico di comando con interfaccia software per l’essiccazione e tutte le connessioni di potenza/controllo - Tubo e ugelli per vaporizzazione acqua Vantaggi principali - Investimento minimo: compri solo l’essenziale, non un’intera cella prefabbricata - Costi di trasporto ridotti grazie al formato compatto del kit - Installazione rapida, semplice e utilizzo intuitivo - Componentistica professionale e materiali di alta qualità per una lunga durata nel tempo - Controllo preciso dell’essiccazione, ideale per segati e produzione di pallet Applicazioni - Segherie di piccole e medie dimensioni - Produttori di pallet - Essiccazione in loco dove una cella completa non è economicamente vantaggiosa - Impianti pilota in fase di test prima della realizzazione di sistemi più grandi Cosa offriamo Kit Airplan completo (componenti sopra elencate) Disegno costruttivo e linee guida per l’installazione Assistenza base all’avviamento e istruzioni per la messa in funzione Prossimi passi / Contatti Per un preventivo, dettagli tecnici (requisiti elettrici, potenze) e il disegno costruttivo, contattaci indicando la capacità di essiccazione desiderata e le dimensioni della struttura prevista. Adatteremo la configurazione alle tue esigenze e ti forniremo un’offerta dettagliata.

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Iedpev Si Szofx Al Netf Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: dober (rabljeno), Leto izdelave: 2020, Masterwood Project 351 L 3-osiowy CNC Opis Chłodzony powietrzem 3-osiowy elektrowrzeciono frezujące 17,5 KM (HSK-63F) Przemiennik częstotliwości umożliwiający programowanie prędkości obrotowej 1.500–24.000 obr./min Zmieniacz narzędzi na 22 pozycje 6 pneumatycznych, wpuszczanych prowadnic paneli do załadunku/pozycjonowania ciężkich elementów Przygotowane do montażu docisków 2 poziome dociski do drewna klejonego warstwowo 6 punktów bazowych wzdłuż osi X (pozycjonowanie paneli przy tylnej krawędzi podpór) 8 punktów bazowych wzdłuż osi X (pozycjonowanie paneli w połowie długości podpór) Pełne odniesienie po prawej stronie wzdłuż osi Y Pełne odniesienie po lewej stronie wzdłuż osi Y 2 pola robocze 1 x pompa próżniowa 100 m³ 24 przyssawki próżniowe Isdpfjvu U Itex Al Notf Pilot radiowy z cyfrowym wyświetlaczem Automatyczny system pomiaru narzędzi Taśmociąg do transportu odpadów Agregat wiertarski z 19 wrzecionami (rozstaw 32 mm) 2,2 kW - 7 pionowych wrzecion w kierunku X - 6 pionowych wrzecion w kierunku Y - 4 poziome wrzeciona w kierunku Y - 2 poziome wrzeciona w kierunku X (wszystkie wrzeciona wiertarskie programowane niezależnie) Jednostka sterująca z komputerem PC Oprogramowanie SINCRO CAD/CAM MASTERWORK Dane techniczne Zakres roboczy w osi X: 5.130 mm Zakres roboczy w osi Y: 1.550 mm Prędkość w osiach X-Y: 80 m/min Prędkość w osi Z: 25 m/min Maks. grubość obrabianego elementu: 200 mm Moc silnika frezującego: 17,5 KM (S1) Obroty elektrowrzeciona frezującego: 1.500–24.000 obr./min Agregat wiertarski: 3 KM System uchwytów narzędziowych: HSK63-F Zmieniacz narzędzi: 22 pozycje Pompa próżniowa: 100 m³ Średnica króćca odpylającego: 250 mm Wydajność powietrza: 4.500 m³/h Prędkość powietrza: 30 m/s Ciśnienie robocze sprężonego powietrza: 7 bar Zużycie sprężonego powietrza: 300–500 l/min Wartość zabezpieczenia: 40 A Waga: 7.000 kg (Wszelkie zmiany, błędy w danych technicznych, informacjach i cenach zastrzeżone. Dostępność może ulec zmianie. Bez gwarancji na dane drukowane!) Najlepsze maszyny do obróbki drewna z Holandii

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, RANDEK forgó keresztvágó fűrész Iedpfovryhgjx Al Nstf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, nice veneer saw with planing unit cutting length 3100 mm Itjdpfxoq Rb Iro Al Nsf with rear stop

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Log feed, chain log infeed and chain log conveyor line – 20 m Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – crosscut saw (year of manufacture: 1995) For cross-cutting and trimming timber in industrial applications Chain log conveyor line – 4 m Cassel Metal Shark® Octa – metal detector Discharge roller conveyor + transfer table – 7 m Control cabin Iodpfx Aljwlaxkj Netf Hydraulic operation Condition: excellent Manufacturer: Holtec Type: ES120 Year of manufacture: 1995