Sredinski stružnica in stružnica za vreteno

POREBA TPK 90

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, - razdalja med konicama / dolžina struženja: 5000 mm - premer struženja nad posteljo: 930 mm - premer struženja nad suportom: 650 mm Gkjdpfxjwnnuxs Ah Dec

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 5.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 8.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TPK-90/5M has undergone a comprehensive overhaul and modernization by us. It features technical specifications that correspond to the operating and technical documentation of a new machine, complies with WOT technical acceptance requirements, Polish standards, and also meets all EU directives. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: In stock, under power, ready for inspection at any time Technical specifications: - Distance between centers / Turning length: 5,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Total length: 7,500 mm Width: 1,800 mm Height: 1,800 mm Total weight: 7,300 kg Gjdpfowk Iq Eex Ah Dokc Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment (available at extra cost): - 3- or 4-jaw chucks, various sizes and versions - Digital Read Out for 2 axes, incl. display, installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Leto izdelave: 1984, Stanje: pripravljen za uporabo (rabljen), Allgemeine Daten Abmessungen Breite: 1800 mm Abmessungen Tiefe: 7500 mm Abmessungen Höhe: 1800 mm Maschinengewicht: 7300 kg Hauptantrieb Anzahl der Spindeln: 21 Spindeldrehzahlbereich: 8–800 U/min Spindelmotorleistung: 16 / 22 kW (1. Gang / 2. Gang) Spindelbohrung: 95 mm Achsenanzahl: 2 Werkstück Umlaufdurchmesser über Bett: 930 mm Gksdpfsw I H Ehex Ah Djc Umlaufdurchmesser über Support: 650 mm Zusätzliche Ausstattung Standardausstattung: Kühlmittelpumpe, Spannfutterabdeckung, Werkzeughalter Optionale Ausstattung: 3- oder 4-Backenfutter in verschiedenen Durchmessern und Ausführungen Digitalanzeige (DRO) für 2 Achsen inkl. Anzeigegerät, Montage und Kalibrierung Mitlaufende Lünette 40–400 mm mit Rollen Mitlaufende Lünette 400–600 mm mit Rollen MULTIFIX-Schnellwechselstahlhalter Diese Poreba TPK 90/5M Flachbettdrehmaschine wurde 1984 gebaut. Sie verfügt über einen Umlaufdurchmesser über Bett von 930 mm, eine Spindelbohrung von 95 mm, und kann mit zwei Lünetten Werkstücke bis zu 9.000 kg tragen. Zur Ausstattung gehören Reitstock, Kühlmittelpumpe, Spannfutterabdeckung und Werkzeughalter. Nutzen Sie die Gelegenheit, diese Poreba TPK 90/5M Flachbett-Drehmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Einsatzgebiete: Drehen

Stanje: dober (rabljeno), Manufacturer: POREBA Type: TPK 90 / 110 Year of manufacture: 1994 Swing steady 1: 150 mm Swing steady 2: 350 mm Swing steady 3: 500 mm 3 units suitable for TPK 90 (or with spacers, TPK 110) Spacers are not included Second tool post to be mounted on the slide Specifications Gkjdpfx Ahjwrrbkj Dsc Metric | US Standard There are (currently) no specifications available for this machine. Approximate dimensions: Length: 1200 mm Width: 800 mm Height: 1000 mm Weight: 1800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The details are given in good faith but accuracy cannot be guaranteed. As such, they do not constitute representation or contractual conditions. We recommend verifying all critical details.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1102-085, izvrtina vretena: 95 mm, premer struženja nad ležiščem sani: 930 mm, stružna dolžina: 12.000 mm, skupna dolžina: 13.400 mm, skupna širina: 2.100 mm, skupna višina: 2.100 mm, širina postelje: 585 mm, skupna masa: 18.000 kg, NUJNO ZA PRODAJO! Accurite digitalni merilni sistem, 2 osi Gkedpswhkuhofx Ah Doc 2x pripiro stabilizator (steady rest) 50 - 300 mm 2x pripiro stabilizator (steady rest) 200 - 500 mm Podajalniki v vseh smereh 4-čeljustna vpenjalna glava 800 mm

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1102-139, premer struženja nad ležiščem sani: 930 mm, stružna dolžina: 2.000 mm, največja hitrost vretena: 710 obr/min, vrtilni moment: 8.500 Nm, No reserve price – guaranteed sale to the highest bidder! Gsdpewfhbajfx Ah Dokc TECHNICAL DETAILS Control system: conventional Working area Swing diameter over bed: 930 mm Swing diameter over support: 630 mm Turning length: 2,000 mm Center height over bed: 465 mm Spindle Spindle bore: 95 mm Speeds: 7 – 710 rpm Torque: max. 8,500 Nm Mounts and accessories Faceplate diameter: 800 mm Chuck diameter: 400 mm MACHINE DETAILS Machine weight: approx. 8,600 kg EQUIPMENT - 1 steady rest

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, premer struženja: 930 mm, premer struženja nad ležiščem sani: 650 mm, stružna dolžina: 6.000 mm, skupna širina: 8.500 mm, For sale is a used lathe from the Polish manufacturer POREBA, model TPK-90A1/6M. The machine is in very good condition, under power, and can be inspected at any time. Equipment as shown in the photos. Technical specifications: - Distance between centers / turning length: 6,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg Gedpfx Ahev Epkko Dskc - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 1,800 mm - Height: 1,800 mm - Total weight: 8,000 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, skupna dolžina: 10.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 9.200 kg, The universal lathe PORĘBA TPK-90/8M has been comprehensively rebuilt and modernised by us. It features technical specifications equivalent to the technical and operational documentation of a new machine, complies with WOT technical acceptance standards and Polish regulations, and also meets EU requirements. The machine comes with a full 12-month warranty for spare parts and electrical components. Availability: made-to-order complete overhaul, delivery time 3.5 months from order confirmation Technical specifications: - Distance between centres / turning length: 8,000 mm - Swing over bed: 930 mm Gkjdpfx Asdyvh Njh Dec - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore diameter: 95 mm - Max. workpiece weight between centres: 6,000 kg - Max. workpiece weight between centres + 1 steady rest: 7,500 kg - Max. workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st/2nd gear) - Overall dimensions: Total length: 10,500 mm Width: 1,800 mm Height: 1,865 mm - Total weight: 9,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and versions - Digital readout for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with roller supports - Steady rest 400-700 mm, with roller supports - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 8.000 kg, nosilec vretena: MK 6, The PORĘBA TPK-90/6M universal lathe has been extensively rebuilt and modernised by our team. It features technical specifications consistent with the documentation of a new machine, complies with WOT technical acceptance conditions and Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: In stock, powered, and available for inspection at any time. Technical data: - Centre distance / turning length: 6000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore: 95 mm - Max. workpiece weight between centres: 6,000 kg - Max. workpiece weight between centres + 1 steady rest: 7,500 kg - Max. workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Gsdpfeiwa Iaox Ah Djkc Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 1,800 mm Height: 1,800 mm - Net weight: 8,000 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, incl. display, mounting and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change toolpost

Leto izdelave: 2024, Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, This universal lathe is professionally overhauled and modernized in our workshop according to customer order and meets all technical standards and parameters of a comparable new machine of this type. The machine is completed and ready for collection within a maximum of 3 to 3.5 months from the time the order is placed. Warranty: 12 months warranty on the modernized, overhauled machine. Technical Data: TPK 90 - Swing diameter over bed [mm]: 930 mm - Swing diameter over carriage [mm]: 650 mm - Swing diameter in gap [mm]: 1200 mm - Spindle bore diameter [mm]: 95 mm - Centre distance [mm]: 10,000 mm - Max. workpiece weight between centers [kg]: 6000 kg - Max. workpiece weight with 1 steady rest [kg]: 7500 kg - Max. workpiece weight with 2 steady rests [kg]: 9000 kg - Number of spindle speeds: 21 - Speed range [rev/min]: 8–800 Gedpfx Ajkh D Txoh Dokc - Number of feeds: 80 - Feed range [mm/rev]: longitudinal: 0.1–12.8 - Feed range [mm/rev]: cross: 0.05–6.4 - Machine dimensions [mm]: Length: 12,500 mm Width: 1,800 mm Height: 1,800 mm - Motor power [kW]: 22 - Machine weight [kg]: 11,000 kg