Luentten 500 / 350 / 150 mm

Poreba TPK 90-

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, največja hitrost vretena: 800 obr/min, moč vretenovega motorja: 16.000 W, skupna višina: 1.800 mm, skupna masa: 7.300 kg, število osi: 2, This Poreba TPK 90/5M horizontal lathe was manufactured in 1984. It features a swing-over bed of 930 mm, a spindle bore of 95 mm, and can handle workpiece weights of up to 9,000 kg using two steadies. The machine is equipped with a tailstock, coolant pump, chuck guard, and tool holder. Take advantage of this opportunity to purchase the Poreba TPK 90/5M horizontal lathe. Contact us for further information about this machine. Additional Equipment • Standard equipment: Coolant pump, chuck guard, tool holder • Optional equipment available: 3- or 4-jaw chuck, various diameters and versions • Digital Read Out (DRO) for 2 axes, including display, installation, and calibration • Steady rest 40–400 mm with rollers • Steady rest 400–600 mm with rollers Njdpfx Ajyaqinebbecl • MULTIFIX quick-change toolpost Machine Advantages Technical Benefits: • Distance between centres / turning length: 5000 mm • Gap bridge: 1200 mm • Max. workpiece weight between centres: 6000 kg • Max. workpiece weight between centres + 1 steady: 7500 kg • Max. workpiece weight between centres + 2 steadies: 9000 kg • Number of feeds: 80 • Feed range (mm/rev): – longitudinal: 0.1 – 12.8, – cross: 0.05 – 6.4 Additional Information The machine has been completely overhauled and comes with a 12-month warranty. Dimensions Machine depth: 7500 mm

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. Nsdpfxjfg E Hps Abbecl - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, - razdalja med konicama / dolžina struženja: 5000 mm Nedpfxjwnnuxo Abbjcl - premer struženja nad posteljo: 930 mm - premer struženja nad suportom: 650 mm

Leto izdelave: 2024, Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, This universal lathe is professionally overhauled and modernized in our workshop according to customer order and meets all technical standards and parameters of a comparable new machine of this type. The machine is completed and ready for collection within a maximum of 3 to 3.5 months from the time the order is placed. Warranty: 12 months warranty on the modernized, overhauled machine. Technical Data: TPK 90 - Swing diameter over bed [mm]: 930 mm - Swing diameter over carriage [mm]: 650 mm - Swing diameter in gap [mm]: 1200 mm - Spindle bore diameter [mm]: 95 mm - Centre distance [mm]: 10,000 mm - Max. workpiece weight between centers [kg]: 6000 kg - Max. workpiece weight with 1 steady rest [kg]: 7500 kg - Max. workpiece weight with 2 steady rests [kg]: 9000 kg - Number of spindle speeds: 21 Nodpekh D Txjfx Abbocl - Speed range [rev/min]: 8–800 - Number of feeds: 80 - Feed range [mm/rev]: longitudinal: 0.1–12.8 - Feed range [mm/rev]: cross: 0.05–6.4 - Machine dimensions [mm]: Length: 12,500 mm Width: 1,800 mm Height: 1,800 mm - Motor power [kW]: 22 - Machine weight [kg]: 11,000 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22012101118, izvrtina vretena: 21 mm, višina središča: 100 mm, premer struženja: 200 mm, vrsta vhodnega toka: Klimatska naprava, premer struženja nad ležiščem sani: 110 mm, vhodna napetost: 230 V, največja hitrost vretena: 2.500 obr/min, največja hitrost vrtenja: 2.500 obr/min, vrtljajska hitrost (min.): 150 obr/min, hitrost vretena (min.): 150 obr/min, pritrditev tulec nasprotne konice: MK 2, nosilec vretena: MK 3, skupna širina: 425 mm, skupna dolžina: 830 mm, skupna višina: 360 mm, Gib pinole konjička: 65 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Plages de travail Hauteur de pointes : 100 mm Distance entre pointes : 300 mm Diamètre de rotation au-dessus du chariot transversal : 110 mm Largeur du banc : 100 mm Plage de vitesses Commande de la régulation de vitesse : réglable électriquement Nombre de plages de vitesses : 2 Plage de vitesses : 150 – 2500 tr/min Données électriques Puissance du moteur d’entraînement : 0,6 kW Tension d’alimentation : 230 V Fréquence du réseau : 50 Hz Normes et homologations Norme : DIN EN 55011 Classe CEM : C1 Broche Alésage de broche : 21 mm Hauteur max. du porte-outil : 12 mm Diamètre de passage du mandrin : 20 mm Ncodpfxow Imhvj Abbel Cône de broche : CM 3 Contre-pointe Cône de la contre-pointe : CM 2 Course du fourreau de la contre-pointe : 65 mm Filetages Pas métrique : 0,25 à 3 mm/tour Nombre de filetages métriques : 14 Pas en pouce : 44 – 8 filets/pouce Nombre de filetages en pouces : 12 Courses Course du petit chariot : 55 mm Course du transversal : 75 mm Course du chariot longitudinal : 300 mm Avance Plage d’avance longitudinale : 0,1 – 0,2 mm/tour Nombre d’avances longitudinales : 2

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 8.000 kg, nosilec vretena: MK 6, The PORĘBA TPK-90/6M universal lathe has been thoroughly rebuilt and modernised by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, complies with the acceptance criteria of the WOT and Polish standards, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: lead time from 3 to 3.5 months, general overhaul to order Technical specifications: - Centre distance/turning length: 6,000 mm - Swing over bed: 930 mm - Swing over carriage: 650 mm - Swing in gap: 1,200 mm - Spindle bore: 95 mm - Maximum workpiece weight between centres: 6,000 kg - Maximum workpiece weight between centres + 1 steady rest: 7,500 kg - Maximum workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Overall length: 8,500 mm - Width: 1,800 mm - Height: 1,800 mm - Total weight: 8,000 kg Ncjdjiwa Iajpfx Abbol Standard equipment: tailstock, coolant pump, chuck guard, toolpost Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and variants - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, skupna dolžina: 10.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 9.200 kg, The universal lathe PORĘBA TPK-90/8M has been comprehensively rebuilt and modernised by us. It features technical specifications equivalent to the technical and operational documentation of a new machine, complies with WOT technical acceptance standards and Polish regulations, and also meets EU requirements. Ncedpfx Asdyvh Nsbbsl The machine comes with a full 12-month warranty for spare parts and electrical components. Availability: made-to-order complete overhaul, delivery time 3.5 months from order confirmation Technical specifications: - Distance between centres / turning length: 8,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore diameter: 95 mm - Max. workpiece weight between centres: 6,000 kg - Max. workpiece weight between centres + 1 steady rest: 7,500 kg - Max. workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st/2nd gear) - Overall dimensions: Total length: 10,500 mm Width: 1,800 mm Height: 1,865 mm - Total weight: 9,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and versions - Digital readout for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with roller supports - Steady rest 400-700 mm, with roller supports - MULTIFIX quick-change tool post

Stanje: dober (rabljeno), Leto izdelave: 2001, Manufacturer: BEHRINGER Model: HBP 530 A Year of manufacture: 2001 Specifications Metric Capacity at 90°: 530 x 530 mm Min. cutting length: 40 mm Max. cutting length: 17 - 110 mm Power: 12 kW Chip conveyor: Yes Dimensions (approx.): Length: 4000 mm Width: 2250 mm Height: 3270 mm Weight: 4400 kg Ncedpfx Abeu U Narebjl Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are to be inferred. We recommend verifying all key details.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, premer struženja: 930 mm, premer struženja nad ležiščem sani: 650 mm, stružna dolžina: 6.000 mm, skupna širina: 8.500 mm, For sale is a used lathe from the Polish manufacturer POREBA, model TPK-90A1/6M. The machine is in very good condition, under power, and can be inspected at any time. Equipment as shown in the photos. Technical specifications: - Distance between centers / turning length: 6,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st / 2nd gear) - Overall dimensions: - Total length: 8,500 mm Nsdpfx Ajv Epkkebbjcl - Width: 1,800 mm - Height: 1,800 mm - Total weight: 8,000 kg

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 930 mm Ncjdpfovndddox Abbol Swing diameter over support: 630 mm Turning length: 6000 mm Swing diameter in gap: 1250 mm Spindle bore: 95 mm Speed range: 8 - 800 rpm Total power requirement: 25 kW Space requirement approx.: 9 x 2 x 1.9 m Faceplate 2 fixed steadies Coolant system Taper turning attachment

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 0000, Angebot überholte FAT Drehmaschinen in Fabriksgeometrie, geschliffene Führungen durch FAT, neue Elektrik usw. TUR 630 M x 2000 oder TUR 630 M x 3000 TUR 630A x3000 oder TUR 630A x 4000 mit Spindelbohrung 140 mm und 2 Futter 400 mm Bison Maschinen lieferbar 3 - 4 Monate nach Auftrag Zubehör nach Kundenwunsch STOCKLISTE NEUE BISON FUTTER Futter in Original-Holzkisten ===== 1 X 4344-630-8 1 X 4344-315-11 1 X 4334-630-8 1 X 4334-500-6 1 X 3204-160 1 X 4305-800 (BACKEN) Ncedpfjnqzaiex Abbsl 1 X 3244-400-8 1 X 3544-400-11 3 X 4344-400-6 1 X 3704-250-6 1 X 4344-250-6 1 X 3514-250-6 1 X 3744-400-11 1 X 3704-400 1 X 3544-400-8 1 X 3245-400-8 2 X 4334-400-8 2 X 4344-400-8 1 X 3434-315-8 1 X 4344-200-6 1 X 3704-315 1 X 4344-250-8 1 X 3204-200 1 X 3234-200-5 Bitte Verfügbarkeit jeweils prüfen! Lieferung: EXW – NL

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 630 mm, izvrtina vretena: 95 mm, premer struženja: 1.200 mm, premer struženja nad ležiščem sani: 930 mm, premer tulec: 130 mm, skupna dolžina: 6.500 mm, skupna širina: 1.750 mm, skupna višina: 1.435 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 7.200 kg, premer diska: 500 mm, nosilec puše: MK 6, teža obdelovanca (maks.): 9.000 kg, nosilec vretena: MK 6, Stružnica TPK 90 x 4000 mm. Proizvajalec: PORĘBA (PL) - leto 1987. Premer struženja nad ležiščem: 930 mm. Premer struženja nad suportom: 630 mm. Premer struženja v mostu: 1200 mm. Prehodna odprtina vretena: 95 mm. Območje vrtljajev vretena: 8-800 min⁻¹. Razpon pomikov suportnega vozička 80: - vzdolžno 0,1 - 12,8 mm/obr., - prečno 0,05 - 6,4 mm/obr. 2-stopenjski motor 15/22 kW. Notranji Morse stožec 6. Ncedpfx Aewa S Awobbjl Masa obdelovanca: - v vpenjalni glavi 800 kg, - med konicama 6000 kg, - z 1 podpornikom 7500 kg, - z 2 podpornikoma 9000 kg, Maksimalna dolžina struženja med konicama: 4000 mm. Pomik zgornjega držala noža: 300 mm. Dimenzije (dolžina x širina x višina): 4500 x 1750 x 1435 mm. Teža: 7200 kg. Oprema: 3-čeljustna samocentrirna vpenjalna glava, Podporni prstan 615 mm, podporni prstan 415 mm.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 5.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 8.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TPK-90/5M has undergone a comprehensive overhaul and modernization by us. It features technical specifications that correspond to the operating and technical documentation of a new machine, complies with WOT technical acceptance requirements, Polish standards, and also meets all EU directives. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: In stock, under power, ready for inspection at any time Technical specifications: - Distance between centers / Turning length: 5,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) Nedpfjwk Iq Esx Abbscl - Overall dimensions: Total length: 7,500 mm Width: 1,800 mm Height: 1,800 mm Total weight: 7,300 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment (available at extra cost): - 3- or 4-jaw chucks, various sizes and versions - Digital Read Out for 2 axes, incl. display, installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Stanje: dober (rabljeno), Leto izdelave: 1956, Heavy-duty lathe, lathe, engine lathe, geared head lathe, screw-cutting lathe - Manufacturer: Weisser, Geared Head Lathe Type PF200 - Turning length: 1340 mm - Swing over bed: 420 mm - Swing over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm Ncedstzf N Repfx Abbol - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Stanje: novo, Spare parts for POREBA lathes A comprehensive spare parts inventory for Poreba lathes: TR55, TR70, TR70B, TR80, TR90, TR90B, TR100B, TR115, TR135, TR135B, TCC125, TCA125, TCA160, TCG125, TCG160, TCG200, TPC90, TRP110MN, TZG250, TNA90N and many more. – Gears, shafts, and gear wheels Ncedpfx Absv R Uaujbel – Rack bars – Lead screws and feed screws with nuts – Cross-slide screws with nuts – Electromagnetic clutches and brakes, brush holders – Pumps, filters, motors – Steadies and travelling steadies – Tailstock quills – Tool holders – Lathe chucks Contact us for further information.