Nosilec podpore

Peddinghaus Aufnahme Ø 51 mm

Leto izdelave: 2026, stanje: novo, Magnetic separator for chip conveyor line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Isdpscqvhxjfx Adkehw Pipe diameter: 180 mm Immediately available Location: Ex-stock 54634 Bitburg

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: Ihsdpfx Adjfyadbokow • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), AL-KO Sanding Table AST 1.5 BASIC The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and bears the seal "Wood Dust Tested according to BGI 739-1". Ijdpfxsdqzhbe Adkshw YOUR ADVANTAGES - Accessible from 4 sides - Loadable up to 150 kg - Manual, tool-free height adjustment with scale - Recessed longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction port TECHNICAL DATA AST 1.5 BASIC - Extraction port: 140 / 160 mm - Required extraction capacity: 1,500 m³/h - Negative pressure at port at 22 m/s: 1,000 Pa at DN140 mm / 700 Pa at DN160 mm - Working height adjustable from: 735–1,015 mm - Working surface (W x L): 946 x 1,500 mm - Dimensions (W x L): 1,000 x 1,600 mm - Weight: approx. 73 kg

Stanje: rabljeno, External dimensions: Width/Height: 65 mm Length: 2600 mm Ijdpfx Asb N Nd Uodkohw Weight: 70 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, Odvijalna, razrezna in navijalna linija za valjano kovino LTs. Iodpfepbwapsx Adkehw Linija 1300 mm/3 mm za natančen razrez. Za odvijanje, razrez kovine, rezanje na manjše trakove, navijanje v manjše svitke. Linija je bila kupljena nova, en lastnik, redno servisirana s strani predstavnikov LTs. Stroj je priključen in ga je mogoče kadar koli preizkusiti v Vilni, Litva. Rezalna linija LTs 1300/3 obsega: - Odvijalni decoiler - Multi-rezilne škarje - Ustavitveni in odrezni segment - Vrtilec z separatorjem - Voziček - Omarica z nadzorno ploščo Tehnične specifikacije: - Širina kovine: 1250 mm - Debelina: 700 mm - Minimalni premer: 508 mm - Maksimalni premer: 620 mm - Zunanji premer: 1200 mm - Največja teža: 7 t - Najmanjša širina rezanih trakov: 75 mm - Največja širina rezane kovinske trake: 1250 mm - Napetost: 3 x 380 V - Moč: 18 kW - Proizvodnja: Poljska - Leto: 1990 Za dodatne informacije nas kontaktirajte.

Stanje: rabljeno, Centrifugal fan, radial fan, radial blower, chip extraction blower, fan, extraction unit, chip blower, high-performance fan, metal chip extraction blower Ihjdpfx Adorh Niaokew - Radial fan: Metal chip extraction blower with wear protection plates - Motor: EMK type EC2-HS160M2-2 - Motor power: 15 kW / 2935 rpm - Inlet connection: Ø 150 mm - Outlet connection: Ø 150 mm - Base plate: 580 x 470 mm - Overall dimensions: 930/820/H1220 mm - Weight: 395 kg

Stanje: dober (rabljeno), Exhaust fan Motor: 11 kW Extraction capacity: 10,000 m³/h Duct dimensions: see photos Iedpfogmnvyjx Adkehw Used, ready for immediate use

Leto izdelave: 2006, stanje: rabljeno, Rotary valve feeder, rotary feeder, dosing sluice, rotary airlock valve for screw conveyor, tubular screw conveyor, bulk material handling, pipe screw conveyor -Manufacturer: Schäffer, rotary airlock valve type 035102D11ST with drive -Drive motor: SEW-Eurodrive 0.37 kW -Speed: 1380 / 11 rpm -Inlet opening: 200 x 200 mm -Outlet: 200 x 200 mm -Overall dimensions: 1120/300/H300 mm -Weight: 117 kg Iodpfx Aol A Azksdkjhw

Stanje: rabljeno, Hydraulic punch, punching frame for use with JOKA HP-S type punching units Hydraulic hole punch, hydraulic press for punch brackets Year of manufacture: approx. 1995 Press force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punch unit width: max. 54 mm Punch unit installation height: max. 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Power supply: 230 Volt, 50 Hz - suitable for universal use of JOKA SW 20 or SWD 20 punching units - Throat depth of the punching units can be increased, units can be pushed through to the rear - Stroke release via electric two-hand operation - Hydraulic unit: HAWE, Type HCW 4 / 2.5-B 1/400-1 - Mounted on mobile frame Space required (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Iedpfjltrmusx Adkehw Good condition

Leto izdelave: 1998, stanje: rabljeno, Technical details: Total power requirement: 1.1 kW Airflow volume: 900 m³/h Filter area: 6.0 m² Filter: 1 unit Machine weight approx.: 125 kg Dimensions L x W x H: 0.74 x 0.62 x 1.8 m Fields of application: Extraction of grinding dust, with other filter inserts also suitable for welding fume extraction - Mobile unit on castors - With collection container for coarse particles - Cleaning interval adjustable up to 60 sec - Pulse cleaning, automatic after shutdown of the unit - Filtering separator Further technical specifications: - Separation surface 6.0 m² - Separation efficiency above 99% - Cleaned air remains in the working area Ihodpfxju N Ad Ns Adkew - The device contains a cartridge filter Ø 400mm, length 270mm - Filter change by hand (maintenance door)