Ventilator za odsesavanje čipov

EMK 15 kW / 2940 U/min

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.730 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 580 kg, skupna dolžina: 1.335 mm, skupna širina: 750 mm, skupna višina: 1.880 mm, tlak (maks.): 11 letvica, temperatura okolja (min.): 3 °C, okoljska temperatura (maks.): 45 °C, raven hrupa: 66 dB, vrsta zaščite (IP koda): IP55, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Model: Aircenter SK22 Year of manufacture: 2020 Condition: Very good, used Operating hours: 6,000 h Load hours: 1,730 h Next service in: 2,589 h Technical Data Pressure: 11 bar Effective delivery rate: 1.67 m³/min Rated drive motor power: 11 kW Drive motor protection class: IP 55 Electrical supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 750 x 1,335 x 1,880 mm Weight: 580 kg Compressed air receiver: 350 l Compressed air connection: G 1 Sound pressure level: 66 dB(A) Refrigeration Dryer Power consumption: 0.49 kW Pressure dew point: 3 °C Pressure drop: 0.06 bar Refrigerant: R 513a Energy-saving control: Yes Lasdpfxjxnnd Ds Al Nea Electronic condensate drain: Eco-Drain Electrical equipment to EN 60204-1: Yes Scope of delivery: – Complete original documentation – 2x RFID cards – 5 m supply cable with 32A plug

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Ledpfehlp Efex Al Njaa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, hladilna zmogljivost: 56 kW (76,14 KM), vrsta hlajenja: voda, vhodna frekvenca: 50 Hz, ogrevalna zmogljivost: 67 kW (91,09 KM), vrsta goriva: plin, "SANYO" PANASONIC ECO G Gas Heat Pump Air Conditioner Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Max. electrical power input: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Thermal input (GCV) (cooling): 43.5 kW Lodpfxsd Tiu Eo Al Nsaa Thermal input (GCV) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high-side: 30 bar Design pressure low-side: 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Lodpfxovllxdo Al Neaa Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Leto izdelave: 2026, stanje: novo, Magnetic separator for chip conveyor line Ljdpfxocqvhxj Al Noaa Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Immediately available Location: Ex-stock 54634 Bitburg

Stanje: dober (rabljeno),

Stanje: novo, Leto izdelave: 2025, TPO0909E Powder Coating Oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Hanging rod for parts * Convection (uniform temperatures throughout the oven), * Locks for secure door opening and closing, * Maximum operating temperature: 230°C. Powder Coating Booth TQ0906 Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1.6 kW * Air capacity: 3,200 m3/h, Lsdpfx Aljfgnytj Neaa * Hermetic lamp: 1 pc. * Automatic filter cleaning system * The booth is equipped with a set of pneumatic quick couplings * Cartridge filter: 1 pc * Powder collection container Oven and booth in stock, ready for shipment. CHOOSE BUMEX SP. Z O.O. Very high quality machinery offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products have a WE certificate. We offer our own transport – prices are arranged individually for each offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, customized configurations and dimensions. Please do not hesitate to contact us.

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: Ljdpfx Aofyadbsl Neaa • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Lsdpfxjiu Smbe Al Neaa Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: rabljeno, Charger for Jungheinrich E 220 G 24/65 B-ET-DA forklift Lasdpfeh Axztsx Al Nja Online video inspection possible via Skype video call. We would be delighted to welcome you for a visit – further machines available in stock. Immediately available – can be inspected at any time. Located in Emskirchen / Nuremberg – test runs possible on site.