Ventilator za odsesavanje čipov

EMK 15 kW / 2935 U/min

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev Bwedpfxjirax Ue Agtjl -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-029, skupna širina: 800 mm, skupna dolžina: 4.700 mm, skupna višina: 1.900 mm, vrsta vhodnega toka: trifazni, poraba energije: 2 kWh, Very good metal separator / metal detector for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after an eddy current separator (non-ferrous separator) or as a stand-alone machine. Separates all metals from a grain size of approx. 1 mm. Suitable for applications with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is ready for immediate operation and can be inspected and tested. Camera option available on request! If the machine is too small, we also manufacture larger models. This is our demonstration machine. The maximum throughput depends on the material and application. Bjdjqabm Eopfx Agtjwl Price negotiable!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bodpfxevf E Avo Agtowl Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: novo, Debelina pločevine 0,8 mm Izsek 180 mm Teža stroja cca 22 kg Potrebni prostor cca 500 x 450 x 160 mm Ročni stroj je opremljen z: - 8 kompleti valjev Bwsdpfx Aoht R Hmjgtol

Leto izdelave: 2026, stanje: novo, Magnetic separator for chip conveyor line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Bwsdpfscqvhxox Agtjl Pipe diameter: 180 mm Immediately available Location: Ex-stock 54634 Bitburg

Leto izdelave: 1995, stanje: zelo dobro (rabljeno), 3 kos centrifugalnih črpalk Sulzer MB 40-160/5 Pretok: 32 m³/h Dvižna višina: 147 m Najv. temperatura: 130°C Tesnilo: drsno tesnilo z zaporno vodo Pogon: Siemens 22 kW Obrati: 2950 obr./min Bjdpfx Aed Sybpsgtewl ! Cena na kos !

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Tip: MN 7.0 FL100 Nazivni premer: 100 mm Osnovna občutljivost iskanja: FE: 0,6 mm; NFE: 0,8 mm; SUS: 1,2 mm Frekvenca: Visoka Leto izdelave: 2017 Bwedpfx Ajm E U Umogtsl Posebnosti: Nova naprava / nikoli uporabljena Tip: Digital 2 VA100 Nazivni premer: 100 mm Osnovna občutljivost iskanja: FE: 0,6 mm; NFE: 0,8 mm; SUS: 1,2 mm Frekvenca: visoka Leto izdelave: nova naprava Posebnosti: kompaktna izvedba z integriranim samodejnim izmetnim sistemom in lijakom Dodatki: dokumentacija in 1 komplet preizkusnih teles Premer cevi: 100 mm

Stanje: pripravljen za uporabo (rabljen),

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: Bsdpfx Agofyadbjtewl • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Leto izdelave: 1986, stanje: potreben popravila (rabljeno), Uraca 624 pump, 520 bar, 167 liters. Year of manufacture: 1986. The valves need to be overhauled. Bwodeh Tydxjpfx Agtjl