Mini Mig 105 nakup rabljenega (19.116)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 449607-1-1, vrsta vhodnega toka: Klimatska naprava, With E-Learning Lorch ArcWorld RS Mini Package includes: ArcWorld RS Mini Cell Welding unit Lorch S5 RM-XT B/W (ArcWorld) * The unit is configured as follows: Version: Yasakawa ArcWorld Unit system: SI unit, mm Power source variant: Power source with 1 wire feeder case System specification: Full process system Process: Pulse Process: SpeedPulse + SpeedPulse XT Process: Synergic + SpeedArc XT Additional process: SpeedArc Additional process: SpeedCold Additional process: SpeedRoot Additional process: Speed-TwinPuls + TwinPuls XT Additional process: SpeedUp Additional process: TwinPuls Cooling: Water Extended water cooling: not included Operation: Control panel integrated in power source Wire feeder case: RF-06 (Euro-ZA) Drive roll set for wire feeder: 1.0/1.2 mm steel Robot interface for wire feeder: YASKAWA ArcWorld Quick coupler for wire guide connection on case Wire feed: not included Wire supply: not included Additional connector for torch control cable Intermediate hose package: Standard 5m Intermediate hose cross-section: 70 mm² Intermediate hose package holder: not included Robot interface: Ethernet/IP Cable to robot controller: EtherNet, 5m LorchNet rear LorchNet front Chassis / base: Feet for ArcWorld cell Iedet Dzxyjpfx Ah Aeik Mains connection: with plug Mains cable length: Standard Dust filter: Nonwoven dust filter Control language setting: DE - German Documentation language: Multilingual Packaging: Standard Torch cleaning station: TCS-D with wire cutter Workpiece lead: 95 mm², 4 m, cable lug M12 Hose package, comprising: Torch neck LMR 2 - TN 6 CTC W, 45° Package LMR 2 - HP 10-W (CR), 1.50 m Starter set Accessories

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), Na voljo je laminirna naprava Autobond za ploščate in toplotno odporne izdelke. Hitrost laminacije: 60 m/min, min. dimenzije pol X/Y: 285 mm/320 mm, maks. dimenzije pol X/Y: 1060 mm/1060 mm, razpon gramature papirja: 90g-650g/m², min. debelina laminirne folije: 24 µm, maks. pritisk valja: 6 t, maks. temperatura grelca/krmiljenja: 140°C/135°C. Dimenzije stroja X/Y: cca. 4000 mm/1600 mm, teža: cca. 2000 kg, delovne ure: 28785 h. Dokumentacija na voljo. Ogled na lokaciji je možen. Isdpfoxbrw Ujx Ah Ajik

Stanje: novo, številka stroja/vozila: mini-bms 105 drehmotor, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotator / MS08 / 5-10t / CUT CONTROL / NEW / in stock & immediately available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - For mulching along riverbanks, in forests, and other difficult-to-reach areas - Mulches brushwood and shrubs up to 10 cm Ø - For excavators from 5-10 tonnes - For mounting on various adapter plates Iiodpfxeqmc Hhe Ah Ask - Drive intended for hydraulic motor according to carrier unit’s flow rate - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front protection with chains - Rear protection with chains - Skids, height-adjustable, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 40 - 100 OPT372 hydraulic 190° rotation unit OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and mounting = €880.00 net An autonomous hydraulic unit is recommended for operation. 3 hydraulic circuits/pipes are required: supply, return, and drain. A double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connectors, or adapter plate. Mr. Herden (Tel. ...) will be happy to assist you. Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Subject to errors and prior sale!

Stanje: novo, Leto izdelave: 2023, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / MS08 / 5-10t / CUT CONTROL / NEW / in stock & immediately available Price: €15,890.00 net / €18,909.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - Suitable for mulching along riverbanks, in forests, and other hard-to-reach locations Iisdpoqhi Ngsfx Ah Ask - Mulches brushwood and scrub up to 10 cm Ø - For excavators from 5-10 tons - Compatible with various mounting plates - Drive system designed for hydraulic motors, depending on the carrier’s oil flow - Indirect drive via 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire length of the hood - Front guard with chains - Rear guard with chains - Height-adjustable, reinforced skid shoes with carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and overpressure valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 40 - 100 Intermediate adapter for BE314 Z1 - approx. 200 mm high - Not required with OPT 372 hydr. 190° rotary unit Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net An autonomous hydraulic unit is recommended for the drive. 3 hydraulic lines are required: feed, return, and drain. A double-acting hydraulic connection is also required for the hydraulic hood. The machine is delivered without hoses, connectors, and adapter plate. Mr. Herden (Tel.) will be happy to assist you. Financing offers available upon request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of Germany’s largest commercial vehicle dealers. We can supply you with the complete Seppi M. product range! Subject to prior sale and errors excepted!

Stanje: rabljeno, Leto izdelave: 2023, Seppi M. MINI-BMS 105 / 5-10 t / Forestry Mulcher / CUT CONTROL / DEMO? Unit / Year of manufacture: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavators - For mulching along riverbanks, in forests and other difficult-to-access areas - Mulches shrubs and wood up to 10 cm diameter - For excavators from 5-10 tonnes - Compatible with various mounting plates - Driven by hydraulic motor, depending on carrier’s oil flow - Indirect V-belt drive with 5 belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over entire hood length - Front guard with chains - Rear guard with chains - Skids, height-adjustable, reinforced with a carbide plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry Rotor with fixed MINI DUO tools (2 carbide inserts) 21 pieces, machine total weight with OPT 228*: 445 kg OPT 513 CUT CONTROL Iedporxpbuefx Ah Aoik - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net We have many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. For operation, an independent hydraulic system is recommended. 3 hydraulic lines are required: feed, return and drain. For the hydraulic hood, a double-acting hydraulic connection is additionally required. The unit is supplied without hoses, couplings, or mounting plate. We are an official Seppi M. sales and service partner, also representing the brands Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz and Iveco as service partners, and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Errors and interim sale excepted! Internal ref: 170048

Stanje: rabljeno, Leto izdelave: 2023, Seppi M. MINI-BMS 105 / 5-10t / Forestry Mulcher / CUT CONTROL / DEMO Unit / Rotary Drive / Year of Manufacture: 2023 / In stock & immediately available Price: €18,990.00 net / €22,598.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Compatible with excavators from 5–10 tons - Suitable for mounting on various adapter plates - Drive designed for hydraulic motor depending on carrier machine’s hydraulic flow - Indirect V-belt drive with 5 belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front guard with chains - Rear guard with chains - Height-adjustable skids, reinforced with tungsten carbide wear strip - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 tungsten carbide inserts) 21 pieces, Total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29–58 - Required hydraulic pressure in bar (min-max): 150–250 - Required hydraulic flow rate in l/min (min-max): 60–130 OPT372 Hydraulic 190° rotation device OPT158 12V solenoid valve for opening rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. An independent hydraulic system is recommended for operation. Iodperwuvpjfx Ah Aeik Three hydraulic lines are required: feed, return, and drain. A double-acting hydraulic connection is also needed for the hydraulic hood. Unit is supplied without hoses, connectors, and adapter plate. We are an official Seppi M. sales and service partner and also represent the brands: Westtech Woodcracker (sales and service partner), DMS (sales and service partner), Magni telehandlers (sales and service partner), JCB construction equipment (sales and service partner), Mercedes-Benz (service partner), Iveco (service partner), and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Subject to errors and prior sale! Internal ref.: 170068

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. Iodpjcuwptsfx Ah Aeik • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), vrsta goriva: dizel, prva registracija: 10/2025, Leto izdelave: 2025, obratovalne ure: 4 h, Pogon: gosenica CE oznaka: da Tehnično stanje: zelo dobro Iijdpfxeq Ulaue Ah Ajk Optično stanje: zelo dobro

Stanje: novo, Leto izdelave: 2024, GG06LX The only backhoe loader with these dimensions on the market. This machine features a highly efficient engine – the new professional backhoe loader: GG06 LX from the international brand Günter Grossmann. Like all machines from Günter Grossmann, this machine comes with a factory warranty, so you can work worry-free. The GG06 LX model is an excellent machine for construction, electrical, and plumbing companies. Backhoe loaders are manufactured using advanced technology that has been utilized in our company for many years. We stock all spare parts for our brand’s machines in Europe. Price 16,500 EUR (excl. VAT) Backhoe loader equipped with 2 buckets SPECIFICATIONS Brand: Günter Grossmann Model: GG06LX Gross weight: 2,280 kg Engine: Kubota D1105 Fuel type: Diesel Number of cylinders: 3 Rated speed: 3,000 rpm Rated power: 18.4 kW Displacement: 1.123 L Radiator: yes Engine oil capacity: 4 L Backhoe hydraulic pump: Parker USA Loader hydraulic pump: PWG Italia Loader hydraulic oil capacity: 84 L Backhoe hydraulic oil capacity: 42 L Hydraulic tank capacity: 22 L Hydraulic tank capacity: 22 L DIMENSIONS Length: 4,900 mm Width: 1,150 mm Height: 2,350 mm Wheel specifications: 26×12.00-12 26×12.00-12 Loader box width: 1,150 mm Minimum ground clearance: 155 mm Travel speed: 12 km/h Min. turning radius: 2,400 mm WORKING RANGE Bucket capacity: 0.6 m³ Payload: 600 kg Loader dumping height: 2,000 mm Loader digging depth: 240 mm Loader bucket lift time at full load: 8 s Bucket lowering time: 4 s Nominal bucket capacity: 0.08 m³ Maximum digging height (excavator): 3,200 mm Backhoe dumping height: 1,990 mm Backhoe max. digging depth: 2,490 mm Backhoe slewing angle (left/right): 52/59° Rated pressure (excavator): 20 MPa Iiodpfsp Aru Rex Ah Ask

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 798 h, Kubota U10-5 Year of manufacture: 2022 Operating hours: 798 Red key Quick coupler and 3 digging buckets Ijdpfxjw Hhcgo Ah Aeik

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1050126453, Leto izdelave: 2006, Žaga deluje brezhibno. Iedpfx Ajxq Tacjh Aoik

Stanje: zelo dobro (rabljeno), Aluminium Silo on Support Ring (Plastic Granulate Silo) – used – designed for a bulk density of 1.0 kg/dm³ Volume: 105,000 liters Manufacturer: Zeppelin Available units: 1 Diameter: approx. 3,000 mm Cylinder height: approx. 17,500 mm Total height: approx. 15,000 mm (incl. 1,250 mm roof edge guardrail) Material: AlMg3 Bulk density: 1.0 kg/dm³ Top head slope: 15° Cone angle: 60° Equipment and Connections: At the top head: 1 x access manhole DN 500 with hinged cover 1 x vent port with hood 2 x flange DN 100 PN 10 (filling + level sensor) 1 x nozzle for high-level sensor 1 x roof edge guardrail with handrail 2 x lifting lugs On the shell: 1 x access door 850 x 2000 8 x pipe supports for filling pipe DN 100 1 x filling pipe DN 100 1 x cable duct 1 x nozzle for high-level sensor The silo discharges at the bottom through a 60° cone with flange DN 200 (outlet height: approx. 500 mm) with suction box. The currently installed measuring and control technology is included. However, no warranty is provided for its functionality! Surcharge: The silo is equipped with a double-flight access ladder with safety cage and rest platform (surcharge: €950 plus VAT). Ijdpfx Aelg Dcfsh Ajik Otherwise as per photos and drawing.

Stanje: rabljeno, New: Yes Contact us for further information. Iodpfxox I A Tpj Ah Aeik

Stanje: rabljeno, prevoženi kilometri: 18.378 km, moč: 100 kW (135,96 KM), prva registracija: 12/2016, vrsta goriva: bencin, naslednji pregled (TÜV): 11/2027, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 5, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, * Original mileage: 18,378 km * Panoramic roof * "Cross Punch" leather upholstery * 6-speed automatic transmission * Air conditioning * Sports seats * Heated seats * Alloy wheels * Rain sensor * Light sensor * Radio: Mini Boost audio system * Colorline Carbon Black * 4x electric windows * On-board computer * Lumbar support * Electrically adjustable and heated exterior mirrors * Lane Departure Assist (LDA) * Brake assist * Rear bench seat, partially and fully foldable * Electronic Stability Program (ESP) * Traction control (ASR) Iedpfox Dplhox Ah Asik * Start/Stop system * Center armrest with storage compartment * Fog lights * Central locking with remote control * 1 previous owner * Fully documented service history at BMW/MINI * Last service at 15,735 km * Very clean and well-maintained vehicle Vehicle number: 129 Whatsapp number: For more vehicle offers, please visit: ONLINE CONSULTATION / ONLINE VIEWING / ONLINE PURCHASE AGREEMENT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY AVAILABLE FOR AN ADDITIONAL CHARGE Delivery service available on request. Foreign customers have the possibility to make a partial payment and collect the car at a later date. NET export possible (for vehicles with VAT deductible). We are happy to handle your vehicle registration (Düsseldorf), as well as the preparation of customs/export or transit license plates (5-day). Complete export processing possible (export declaration). Vehicles with TÜV used vehicle inspection report available. On request, we are also happy to offer our GPG used car warranty with customized solutions specifically for you and your vehicle. Trade-in possible. For further questions, feel free to contact us by phone. Opening hours: Monday - Thursday 09:00 - 16:30, Friday 09:00 - 16:00 Subject to changes, typographical errors, mistakes, and prior sale. Offers are non-binding. All information provided without warranty. Vehicle descriptions expressly do not constitute guaranteed characteristics.

Stanje: dober (rabljeno), Tehnični podatki za izravnalno pločevino: Proizvajalec: Bito PRO Obseg dobave vključuje: 01x izravnalna pločevina, rabljena Primerno za osnovno ploščo M; Isdpoi Hkngofx Ah Ajik ki je nameščena na regalnem stojalu P4-P6 Barva materiala: Sendzimir pocinkano Skupna širina: ca. 150 mm Skupna globina: ca. 105 mm Debelina materiala: ca. 4,00 mm Razdalja med luknjami (sredina – sredina luknje): ca. 120 mm Teža: ca. 0,46 kg / kos.

Stanje: rabljeno, Leto izdelave: 2006, Year of manufacture: 2006 Condition: very good condition Box Gluing Machine suitable for the production of: - Standard folding cartons (1-3 points) from folding boxboard - Folding lid boxes with double fold - Shipping envelopes Materials processed: - Folding boxboard, 200-600 g/m² - Corrugated board, E-flute Configuration for standard boxes: - Feeder with timing function for handling heavy box types (1 vibrator, 2 air blowers) - Drive shaft bridge between feeder and pre-folding station - 3 pull-in rollers incl. mounting above the bridge station, for very wide products - Digital displays for faster machine setup - Pre-folding station - Bottom gluing unit incl. glue application wheel (left side) - Folding station - Transfer station - Collection and pressing station - Electronic counter - Air marking device (compressed air required) - Speed: 400 m/min - Video camera for transfer station monitoring (camera and monitor at feeder) - Additional device for the production of crash-lock bottom boxes Iisdpfoww H S Uex Ah Aok - 1 unit for crash-lock bottom boxes - 1 soft rubber belt incl. guide components and holders - 1 device for 3rd line pre-breaking for crash-lock bottom boxes Additional devices for alternative folding processes: - 1 device for folding double-wall lid boxes - 1 device for folding wallet sleeves (CDs) 120–380 mm Gluing system: - 1 HHS glue system with holders for top-side dispersion glue application - 2 top-side glue application nozzles - 4 controlled channels - 2 light barriers - 1 gluing station - 1 fill level control

Stanje: rabljeno, Ta oglas je za centrifugo VWR Mini Star Silverline. Iiodpfxsxzhiaj Ah Aek

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Additional options available at extra cost E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ Iiedpjwbil Sefx Ah Aok ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Stanje: dober (rabljeno), Technical data for compensation plate: Manufacturer: Bito Scope of delivery includes: 01x compensation plate, used Material color: Sendzimir galvanized Total width: approx. 140 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center-to-center): approx. 110 mm Ijdpfsi Hknyox Ah Aeik Weight: approx. 0.15 kg | each

Stanje: kot nova (razstavni stroj), Fronius TPS 3200 ✅ Scope of delivery: ➤ Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The unit shuts down if the water cooling fails or overheats to protect the torch assembly. These features typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most sensible wire feed case. The wire spool is safely stored inside the closed case. ➤ Fronius intermediate hose package, long version – each unit includes a 5-meter connecting hose set between the power source and wire feeder for greater flexibility and improved handling. Take the wire feed case off the machine to reach difficult areas! The connecting hose is neatly mounted on a hook at the side of the unit (hooks are manufactured by us). ➤ Fronius large transport cart – Probably the best cart with gas cylinder holder on the market. ➤ Binzel torch package – With up/down amperage adjustment on the torch handle. ➤ Earth cable 3–4m Dobkh Hjum Rw Dsufpokk (unclear term left untranslated) ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools With this equipment you can weld nearly all materials, including aluminium, steel, and V2A. It features cold wire programmes and is also suitable for Mig brazing (CuSi), which is widely used in sheet metalworking. Additional options available for a surcharge, for example Fronius Job Master torch package (display on torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna, Austria 1230! ✔ Insured shipping on pallet available! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the equipment? Iedpjwbilxofx Ah Ajik For clarification: we buy nearly new pre-owned units, dismantle and check everything, replace wear parts if necessary, and only release for sale after successful test welding. "All" equipment is clean and has neither burn marks on the display nor multiple burn holes or dents across the unit! You are buying an item from us that is also ⭐worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for an intra-Community delivery within the EU, we can issue a net invoice. ►►►What are the payment options? Prepayment or cash on collection in person. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always stock 60–80 units – exclusively Fronius, no other brands! We know these machines inside out and never sell anything we aren't fully familiar with.

Stanje: dober (rabljeno), Technical data for compensation plate: Manufacturer: Bito Iijdpji Hknvsfx Ah Ajk Scope of delivery: 01x compensation plate, used Material colour: Sendzimir galvanized Total width: approx. 140 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (centre to centre): approx. 110 mm Weight: approx. 0.41 kg | per piece

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net incl. BINZEL TORCH PACKAGE UP/DOWN or Fronius AW torch package with display on torch incl. conversion of connections (+€500) ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooler – Standard with Flow Control, Thermocontrol, and coolant filter. The cooler switches off in the event of a cooling failure or overheating to protect the torch package. These functions usually cost around 400 € extra at Fronius. ➤ Fronius VR 7000 Wire Feeder Case – Compact and practical - in our opinion the most useful feeder case - the wire is safely stored in the closed case. ➤ Fronius Long Intermediate Hose Package – each unit is supplied with a 5-metre connection hose package between the power source and the wire feeder for greater flexibility and improved handling. Take the wire feeder with you to hard-to-reach workplaces! The connection hose is neatly mounted on a hook at the side of the unit. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage regulation on the torch. ➤ Ground cable 3-4m ➤ New pressure regulator from Messer ➤ New basket spool adapter for large wire spools With this unit, almost all materials can be welded, including aluminium, steel and stainless (V2A). It is equipped with pulse wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in panel beating. Further options are available at extra charge E.g. Fronius Job Master torch package (display on torch) + EUR 450.00 First 10 buyers of a unit receive an extra -> second torch package free of charge Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk IMMEDIATELY AVAILABLE PROPER INVOICE Ijdowbillspfx Ah Aeik Viewing possible in Vienna, 1230 Austria! ✔ Insured pallet shipping no problem! ✔ We are also available via Whatsapp and Viber. ✅QUESTIONS✅QUESTIONS✅QUESTIONS✅QUESTIONS: ✅QUESTIONS✅QUESTIONS✅QUESTIONS✅ ►►►What condition are the machines in? For explanation: we buy as-new used machines, completely disassemble and check them, replace worn parts if necessary, and only after successful test-welding do we release them for sale. "All" machines are clean, no burn holes on the displays, and without numerous burn marks or dents! You are buying an item that is ⭐worth seeing and doesn't look completely worn out! ►►►Will we receive an invoice with our purchase? Yes, you will receive a proper invoice. If you have a valid VAT ID, and meet the requirements for Intra-Community Delivery within the EU, we can issue a net invoice. ►►►What are the payment options? Advance payment or cash upon personal collection ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 machines in stock – only Fronius, no other brands! We know these machines inside out and don’t sell anything we're not familiar with.

Stanje: dober (rabljeno), Technical specifications for the leveling plate: Manufacturer: Bito (L) Iisdpfx Ahei Hkn Dj Aok Scope of delivery includes: 01x leveling plate, used Material finish: sendzimir galvanized Overall width: approx. 120 mm Overall depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center to center): approx. 95 mm Weight: approx. 0.37 kg | each

Stanje: dober (rabljeno), Technical data for the compensation plate: Manufacturer: Bito (L) Scope of delivery includes: 01x compensation plate, used Iedpfoi Hkn Iox Ah Asik Material color: Sendzimir galvanized Overall width: approx. 120 mm Overall depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center to center): approx. 95 mm Weight: approx. 0.14 kg | each

Stanje: dober (rabljeno), Technical data for the leveling plate: Manufacturer: Bito (M) Scope of delivery includes: 01x leveling plate, used Material color: sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Ijdpfxji Hknke Ah Aeik Hole spacing (center - center): approx. 120 mm Weight: approx. 0.18 kg | each