Filtrirni sistem

Donaldson Torit VS550

Stanje: dober (rabljeno), Premer struženja nad ležiščem: 280 mm Premer struženja nad suportom: 170 mm Dolžina struženja: 600 mm Teža stroja ca.: 400 kg Premer vretena: 26 mm Hitrosti vrtenja: 55-2000 min⁻¹ Skupna potrebna moč: 1,4 kW Zahtevan prostor ca.: 1,5 x 0,8 x 1,3 m Vključuje brusilni suport EMCO SOD Vključuje 4-čeljustno stružno glavo EMCO Dodjyz Dg Rjpfx Apleut Vključuje strojne noge Vključuje menjalna kolesa

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts Dsdot Hw Iijpfx Aplsut up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2026, - TFON Sistem za zaobljanje robov in površinsko čiščenje - Združljivost materialov: Primerno za običajno jeklo, aluminij in nerjavno pločevino - Razpon debeline materiala: Obdeluje materiale debeline od 0 do 120 mm Dujdpfjhq A T Ujx Aplst - Zaobljanje robov: Izvaja zaobljanje robov s polmerom 2 za gladke, varne robove, ki izboljšajo videz in funkcionalnost obdelovanca - Natančen nadzor: Opremljen z Siemens avtomatizacijskim sistemom za natančen in dosleden nadzor med celotnim postopkom - Neodvisne postaje: Več obdelovalnih postaj omogoča prilagodljive operacije, ki omogočajo sočasno ali zaporedno izvajanje različnih nalog - Možnosti delovnih miz: Na voljo so dimenzije delovne površine 650 mm, 1000 mm ali 1300 mm, odvisno od proizvodnih potreb - Vrste miz: Fleksibilne konfiguracije vključujejo magnetne, vakuumske ali magnetno-vakuumske mize za varno podporo raznolikih materialov in velikosti kosov - Plazma in kisikova tehnologija: Uporablja napredno plazemsko in kisikovo tehnologijo za učinkovito odstranjevanje močnih ostružkov in žlindre po rezanju ter zagotavlja čistejše, gladkejše površine - Površinsko čiščenje: Učinkovito odstranjuje površinske nečistoče kot so rja, oksid in luska ter pripravlja izdelke za nadaljnjo obdelavo - Zaobljanje robov za premazovanje: Izdelke ustrezno pripravi za barvanje in lakiranje, saj zagotovi enotno, popolnoma pripravljeno površino brez nepravilnosti - Industrijske uporabe: Idealen za jeklarne, energetsko industrijo, rudarstvo, gradbeništvo in avtomobilski sektor. Nudi rešitve za zahtevne aplikacije - Enotni rezultati: Šest lamelnih kolutov deluje usklajeno za dosledno in enako zaobljene robove na vseh kosih - Pnevmatski nihajni sistem: Podaljšuje življenjsko dobo brusnih trakov z zmanjšano obrabo in vztrajno, enakomerno učinkovitostjo

Leto izdelave: 2026, stanje: novo, Magnetic separator for chip conveyor line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Immediately available Duodpfxocqvhxo Apljt Location: Ex-stock 54634 Bitburg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 450 mm, pomik osi Y: 200 mm, pomik po osi Z: 960 mm, število osi: 5, Ta 5-osni Mazak INTEGREX J-200 S je bila izdelana leta 2021. Ima največji obdelovalni premer 500 mm, X-hod 450 mm, Y-hod 200 mm in Z-hod 960 mm. Stroj je opremljen z 36-orodnim magazinom in največjo hitrostjo vretena 4.000 vrt/min. Če iščete visokokakovostni stružno-rezkalni stroj, priporočamo Mazak INTEGREX J-200 S, ki ga imamo v prodaji. Za več informacij nas kontaktirajte. • Krmiljenje: Smooth G • Razdalja med vreteni: 1000 + 440 mm • Največji obdelovalni premer: 500 mm Duedpfx Aoyxc N Eeplst • Priključek vretena: A2-6 • Največja kapaciteta palic: 65 mm • Premer vretenine: 76 mm • Magazin orodij: 36 Capto Dodatna oprema • Transporter odrezkov: trakasti tip Mayfran

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Dsdpfx Aot Hw Shspleut Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2008, Weiler Primus VC Univerzalni vodilno-vlečni vretenasti stružnica Stanje: rabljeno Leto izdelave: 2008 Tehnični podatki Višina konic: 140 mm Razdalja med konicama: 500 mm Premer vretena/prehod skozi vreteno: 40 mm Širina postelje: 205 mm Število obratov, brezstopenjsko nastavljivo: 30 - 4000 1/min Moč motorja Nazivna moč glavnega pogona: 4 kW Vpenjanje konjička: stožec DIN 228, MK 3 Pomik pinole: 85 mm Mere Teža: cca. 800 kg Dimenzije DxŠxV: cca. 1600 mm x 950 mm x 1700 mm Oprema / dodatki Siemens SICOMP IMC 05 3-čeljustna vpenjalna glava 4-čeljustna vpenjalna glava Hitromenjalni nosilec sistem Multifix, 6 vložkov Posteljni omejevalec Vpenjalna glava za vrtanje s konusnim trnom Naprav za vpenjalne puše Velik set vpenjalnih puš Fiksna in sledilna luneta Hladilna naprava Nujno izklopno stikalo Strojna svetilka Duedpfxeyuy D Rj Aplst Komplet menjalnih zobnikov Orodje za upravljanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Glavni pogon Število osi: 5 Ta petosna stružno-rezkalna center Mazak INTEGREX I-150 je bil izdelan leta 2012. Razmislite o nakupu tega centra Mazak INTEGREX I-150. Za več informacij nas kontaktirajte. Duodex D I Rpepfx Aplst Vrste uporabe Struženje

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: Dodpfx Asfyadboplsut • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, največja hitrost vretena: 2.800 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 105 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.163 mm, skupna širina: 2.005 mm, skupna masa: 7.500 kg, največja dolžina izdelka: 4.438 mm, število osi: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine is equipped with a 12-station turret, a tailstock with tailstock drive, and a steady rest with a diameter range of 40 mm to 200 mm. If you are looking for a high-quality lathe, consider the horizontal lathe DOOSAN Puma 2600 LYB II we have available for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over carriage: 630 mm • Recommended turning diameter: 315 mm • Maximum turning diameter: 376 mm • Maximum turning length: 1,350 mm • Bar capacity: 102–103 mm • Main spindle • Spindle nose: ASA A2-11 • Bearing diameter: 160 mm • Spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s • Driven tool speed: 5,000 rpm • Axes: Dodeytt A Rspfx Apljut • C-axis rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock • Type: Rotating tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill stroke: 100 mm • Motors / Power • Driven tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical power: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, diameter range 40–200 mm • Three powered radial Eppinger chucks/spindles • Tool presetting system (tool presetter) Technical Specification Counter spindle: No Driven tools: Yes