Videl dvojno Mitre postaja z ločenima enojnima posteljama

Omga TRF527

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch Fgjdoxnlgcspfx Abtec • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: dober (rabljeno), Leto izdelave: 1984, SAC rabljeni poravnalni skobeljni stroj SAC FS 430 - Širina skobljanja: 430 mm - Dolžina mize: 2,90 m - Nožna gred 120 mm s 4-rezilnimi lamelnimi rezili - Motor 3 kW 380 V - Avtomatska zavora motorja - Odstranitev ostružkov: 8 mm - Vzporedni prislon nastavljiv do 45° - Dodatni prislon Aigner za preklop - Mostični zaščitni pokrov (zaščita za nože) - Tih način z nazobčanimi jeklenimi robovi mize - Izvlečni priključek - Teža: cca. 650 kg Lokacija: na lokaciji kupca - na voljo takoj - Fgsdpsx Nrvvjfx Abtoc Vmesna prodaja pridržana

Stanje: rabljeno, Leto izdelave: 2002, DVOKOTNA ŽAGA (ŽAGA ZA STEKLENE LETVICE) OMGA TRF 527 NC z zvezdastim prislonom Letnik 2002 Min. in maks. razdalja med agregati: 158 mm, 2800 mm Kapaciteta reza pri 90°: 55 mm Kapaciteta reza pri 45°: 40 mm Fjdpfoxwumqsx Abtsgc Maks. višina reza: 40 mm Moč motorja: 2 x 1,18 kW Premer odprtine žaginega lista: 30 mm Premer žaginega lista: 220 mm Hitrost vretena: 5000 obr/min

Leto izdelave: 2005, stanje: dober (rabljeno), I am selling a double mitre saw OMGA TRF 527, year of manufacture 2005. Cutting length: 390 - 2800 mm Maximum cutting width: 170 mm Maximum cutting height: 90 mm Swivel heads: 0° / ±45° 2 horizontal and 2 vertical pneumatic material clamps 2 motors x 1.62 kW (2.2 HP) Good condition. Fodpfx Abog Tumcstegc Available immediately.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, I am selling a combined machine: sliding table panel saw with scorer + spindle moulder Manufacturer: FELDER Austria Model: KF700S Year of manufacture: 2011 Cutting length: 3200 mm Saw blade and spindle moulder tilting 0-45° manual Saw blade and spindle moulder height adjustment digital Digital display for parallel fence and working height Main and scoring saw blade activation from aluminum sliding table. Main motor panel saw: 3.0 kW / (adjustable 3200/4500/5800 rpm) Scoring motor panel saw: 0.75 kW Main motor spindle moulder: 5.5 kW Tools, options, and accessories as shown in the pictures are included in the price. Very good condition. Immediately available. Fgedpfxor Alzpo Abtec Including full documentation and CE certificate.

Stanje: zelo dobro (rabljeno), SCM Compact XL Four-Sided Planer - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally Fsdpfjlat Hdsx Abtsgc - Bottom spindle: 4 kW, right and left spindle driven by a single motor: 7.5 kW each, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine -Spindle adjustment: height and angle Fjdpfjh Nvyzox Abtegc -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg

Stanje: novo, Leto izdelave: 2026, Popolnoma avtomatsko rezanje srednje velikih do velikih aluminijastih profilov z enostavno avtomatizacijo za uporabo. Preprosto odložite kateri koli aluminijasti profil, stroj ga avtomatsko zazna in razreže po nalogah z visoko natančnim servo pomikom materiala. Uvoz Excelovih seznamov nalog preko WIFI za enostaven vnos obsežnih seznamov za razrez. Za vsak kos aluminija, ki ga položite za razrez, ne glede na dolžino, laserski senzor izmeri dolžino. Naš zmogljiv algoritem optimizacije sproti izračuna optimalno zaporedje izreza za minimalne odpadke. Stroj po tem seznamu izrezuje avtomatsko, brez prekinitev. Vmesni vnosi niso potrebni – vi samo prinašate novo zalogo aluminija. Enostavna, hitra alternativa dvo-glavnim žagam. Preprosto vnesete (ali uvozite) potrebne dolžine in kote ter pritisnite GO. Stroj neprekinjeno proizvaja vaše kotne dele, natančno in hitro. • Popolnoma avtomatsko rezanje z avtomatskim podajanjem in rezanjem na dolžino. • Enostaven uporabniški vmesnik za avtomatsko delovanje – vnos naloge in razrez v nekaj sekundah. • Poenostavljeno razrezovanje kosov, serij ali velikih excel seznamov. • Paketno/multi-palčno rezanje in štetje. • Oddaljen vnos excel seznamov nalog prek WIFI z naprednim povezovanjem podatkov. • Popolnoma nastavljiva hitrost podajanja žage in materiala za največjo produktivnost procesa. • Samodejni optimizacijski način z laserskim merjenjem dolžine in minimizacijo odpadkov (opcijsko). • Samodejni izpis etiket za kose na podlagi podatkov iz delovne naloge (ročno lepljenje, opcijsko). • Neposredno vrstično tiskanje na material brez posega operaterja (opcijsko). • Tiskanje ali skeniranje črtnih oz. QR kod za vnos nalog (opcijsko). • Avtomatiziran servo pomik kota žagine glave do ±75° (opcijsko). Fgjdpfsf Ekn Iex Abtjc Odlično primerno za: • Proizvodnjo oken in vrat • Proizvodnjo aluminijastih kotnih konstrukcij • Proizvodnjo aluminijastih sestavljenih konstrukcij • Proizvodnjo kompozitov • Proizvodnjo žaluzij, senčil in pohištva • Trgovino z aluminijem Model: A550 Dolžina: 3 m Linearni pogon: ProfiStop Alpha Dolžina materiala: 1680 mm Potisna zmogljivost: 20 – 40 kg Programska oprema: Optimiser KAKOVOSTNI STROJI IZ AVSTRALIJE.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 530 mm, število rezil rezkalnika: 4, Oprema: motorna zavora, Houfek Planer Thicknesser R 530 - 400V/50Hz, 5.5 kW (7.5 HP), Width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterblock 1.2 Total working table length 3100 mm 1.3 Fence dimensions 1300x150 mm with tiltable auxiliary fence 1.4 Planed table surface 1.5 Top control panel with ELGO Z60 digital display - Electronic adjustment of cutting depth 0 - 7 mm - Tilting range of the tiltable fence 0°- 45° - Digital display - Adjustment of infeed table inclination (concave/convex jointing) 1.6 SUVAMATIC cutterblock guard 1.7 4-knife cutterblock D=120 mm 1.8 Automatic star-delta motor start 1.9 Electromagnetic brake Fgedpeu Rnqqsfx Abtjc 1.10 Extraction port with outlet D=150 mm 1.11 Knife setting gauge 1.12 Voltage 400V/50Hz 1.13 Standard packaging in PE foil 1.14 Machine built according to CE electrical and safety standards

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" Fgedpfx Asdt Rgvebtec VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12