Kotna žaga

Omga

Stanje: dober (rabljeno), Leto izdelave: 2000, I am selling a double mitre saw OMGA TR2A. Cutting length: 390 - 3000 mm Maximum cutting width: 170 mm Iaodpfjtwbcyjx Adkop Maximum cutting height: 90 mm Tilting heads: 0 ± 45° 2 horizontal + 2 vertical pneumatic material clamps 2 motors x 1.62 kW (2.2 HP) Good condition. Available immediately.

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel Iaedpfx Aecggy Sedkjp - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Stanje: rabljeno, Leto izdelave: 2002, DVOKOTNA ŽAGA (ŽAGA ZA STEKLENE LETVICE) OMGA TRF 527 NC z zvezdastim prislonom Letnik 2002 Min. in maks. razdalja med agregati: 158 mm, 2800 mm Kapaciteta reza pri 90°: 55 mm Kapaciteta reza pri 45°: 40 mm Maks. višina reza: 40 mm Moč motorja: 2 x 1,18 kW Premer odprtine žaginega lista: 30 mm Iedpsxwumqjfx Adkeap Premer žaginega lista: 220 mm Hitrost vretena: 5000 obr/min

Stanje: dober (rabljeno), Leto izdelave: 1995, Avtomatski stroj za izsekavanje utorov za križne spoje (za tehnične podatke glejte priložen prospekt). Rabljeni stroj v dobrem stanju, pred dostavo preizkušen v naši delavnici. Isdjyr A Umjpfx Adkjap

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12 Ijdpsdt Rgvsfx Adksap

Stanje: rabljeno, Leto izdelave: 2014, skupna dolžina: 5.200 mm, skupna širina: 900 mm, skupna višina: 1.700 mm, Poids : 500 kg Prix : Sur demande - Année de fabrication : 2014 - Documentation disponible : Non - Certificat CE disponible : Non - Numéro de série : 8.687 - Puissance moteur principal [kW] : 3,1 - Profondeur de coupe max. [mm] : 120 - Hauteur de coupe max. [mm] : 90 - Diamètre de lame min. [mm] : 350 - Diamètre de lame max. [mm] : 350 - Diamètre d’alésage de la lame [mm] : 30 - Tension [V] : 400 - Consommation électrique [A] : 6,53 - Fusible [A] : 16 - Puissance [kW] : 3,1 - Dimensions de transport : 5200mm x 900mm x 1700mm (L x l x H) Ijdpeyna Aysfx Adkjap - Poids de transport [kg] : 500kg - Unités d’emballage transport [pcs] : 2 Informations financières TVA : Le prix indiqué s'entend hors TVA TVA/régime de la marge : TVA déductible pour les entreprises Livraison et reprise possibles à tout moment pour tous les biens du secteur industriel Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2010, skupna dolžina: 1.500 mm, skupna širina: 900 mm, skupna višina: 1.700 mm, Poids : 500 kg Prix : Sur demande - Année de fabrication : 2010 - Documentation disponible : Non - Certificat CE disponible : Non - Numéro de série : 6.719 - Puissance moteur principal [kW] : 3,1 - Profondeur de coupe max. [mm] : 120 - Hauteur de coupe max. [mm] : 90 Iasdpeyna Aaefx Adkep - Diamètre max. de la lame de scie [mm] : 350 - Diamètre d’alésage de la lame [mm] : 30 - Tension [V] : 400 - Consommation électrique [A] : 7,13 - Fusible [A] : 16 - Puissance [kW] : 3,1 - Dimensions de transport : 1500mm x 900mm x 1700mm (L x l x h) - Poids transport [kg] : 500kg - Nombre de colis de transport : 1 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tout matériel industriel Yorick Diebels

Stanje: potreben popravila (rabljeno), Machine for turning smaller wooden pieces; the machine works with diameters from 7 to 45 mm. Iaedjuknznepfx Adkep

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support Iaedsxnlgcjpfx Adksp TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 140 mm, največja širina rezanja: 1.000 mm, premer žaginega lista: 400 mm, vrsta nastavitve višine: mehanski, OMGA 1000 Radial Arm Saw Specification: Iasdpfx Adsv Hqknskep • Condition – after inspection, fully operational • Manufacturer – OMGA • Model – 1000 • Maximum blade diameter: 400 mm • Maximum cutting dimensions: 140 x 1000 mm • Blade guards for operator safety • Cutting adjustment in three planes • Extraction port diameters: 80 mm and 110 mm • Table dimensions: 160 x 95 cm • Year of manufacture: 1998 • Manufacturer’s documentation included • Overall dimensions: 175 x 170 x 155 cm (L x W x H) Additional information: • The machine is in excellent technical condition and ready for immediate use • The photos shown reflect the actual condition of the item for sale • Possibility to power up and test the machine on site • The price quoted in the listing does not include VAT or transport costs

Stanje: novo, Deburring machine Manufacturer: Assfalg Model: AF 165 Condition: New machine Speed: 2,800 rpm Iaodpfx Adodurxnskep Maximum chamfer width: 1 mm Standard equipment includes: - Special flap grinding wheel K80-ST - Extraction nozzle - Operating manual

Stanje: zelo dobro (rabljeno), KATALOGNA ŠTEVILKA 7065 TEHNIČNI PODATKI - maks. premer rezila 300mm - premer vretena 30mm - zaščite za rezila 2 kosa - pnevmatsko rezanje (gibanje rezila gor/dol) - žagalne enote nastavljive pod kotom 45° - ročno nastavljanje razmika žagalnih enot - min. dolžina reza pri 90° 220mm - maks. dolžina reza pri 90° 2820mm - širina reza 110mm - višina reza pri 90 stopinjah 90mm - pnevmatski pritiskači 2 kosa - nožni pedal za upravljanje - podpora za material - glavni motor 2×1,6kW - dimenzije d/š/v 3620x1100x1250mm - teža približno 500kg – nelakirana – nagibne žagalne enote – rabljena žaga, zelo dobro stanje Cena brez DDV: 13.900 PLN Cena brez DDV: 3.300 EUR glede na tečaj 4,2 EUR Iasdpfox Sq E Ijx Adkop (Cene se lahko spreminjajo pri večjih nihanjih)

Stanje: rabljeno, Precizna kap in kotna žaga / Precizna Kapp- in Gehrungssäge OMGA T55 300 Leto izdelave / Leto cca. 2009 z odsesavanjem Premer žaginega lista 300 mm Širina reza max. pri 90° 135 mm Širina reza max. pri 45° 90 mm Višina reza max. 98 mm Fiksne točke pri 45°–30°–22°30'–15°–10° desno in levo Zelo dobro ohranjeno stanje Nastavljiva precizna kap in kotna žaga z vrtljivo mizo, samozaklepanjem na glavnih kotih 45°, 30°, 22°30’, 15°, 10° in 0° desno in levo, ročnim zaklepanjem vmesnih kotov, prikazom kota na stopinjski lestvici. Isdpfx Adexvh E Rokoap Online video pregled preko WhatsAppa – MS Zoom – Telegram Na zalogi v Emskirchen/Nürnberg – Na voljo takoj – Možnost testiranja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Splošni podatki Širina: 2.300 mm Globina: 2.800 mm Višina: 2.700 mm Teža stroja: 4.500 kg Glavni pogon Območje vrtljajev vretena: 10.000 min⁻¹ Moč motorja vretena: CAT40 / SK40 Število osi: 4 Pomik Pomik osi X: 762 mm Iaedpfjx D Ikpex Adkjp Hitri pomik osi X: 24 m/min Pomik osi Y: 508 mm Hitri pomik osi Y: 24 m/min Pomik osi Z: 610 mm Hitri pomik osi Z: 24 m/min Miza Velikost T-utora: 18 mm Število T-utorov: 5 Nosilnost mize: 750 kg To štiriosno obdelovalno centro Hurco VMX30 je bilo proizvedeno leta 2004. Ponaša se s CNC rezkalnim strojem z vrtljivo mizo za funkcionalnost četrte osi. Ključne tehnične lastnosti vključujejo hod po osi X 762 mm, Y 508 mm, Z 610 mm in dimenzijo mize 1.016 × 508 mm. Največja hitrost vretena je 10.000 min⁻¹, revija za orodje ima kapaciteto 24 orodij. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra Hurco VMX30. Za več informacij nas kontaktirajte. Uporaba Rezkanje

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, največja višina reza: 80 mm, skupna dolžina: 7.470 mm, skupna širina: 1.100 mm, skupna višina: 1.500 mm, skupna masa: 450 kg, dolžina rezanja (maks.): 2.500 mm, glavni premer žaginega lista: 340 mm, OMGA T720 Crosscut Saw Specification: • Condition: used • Manufacturer: OMGA • Model: T720 Ijdpfxer Ik I Aj Adkjap • Working width: 250 mm • Working height: 80 mm • Motor power: 2.2 kW • Right-side table length: 400 cm (2 x 200 cm) • Left-side table length: 315 cm • Table width: 29 cm • Pneumatic stops for cutting to set length – 3 pcs. • Adjustable cutting speed • Max. blade diameter: 340 mm • Spindle diameter: 40 mm • Extraction port diameter: 100 mm • Weight: approx. 450 kg • Overall dimensions: 742 x 110 x 150 cm (L x W x H) • Machine body dimensions: 100 x 110 x 150 cm (L x W x H) Additional information: • Very good original technical and visual condition • The photographs shown reflect the actual condition of the machine offered for sale • The machine can be powered on and tested on-site • The auction price does not include VAT