Zrak Zrak Toplotni Izmenjevalec nakup rabljenega (3.234)

Stanje: dober (rabljeno), Leto izdelave: 1990, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure boiler, compressor tank, compressed air vessel Gbedpfx Aowwg Aaeh Dsu -Manufacturer: Zeidler & Uhl, upright pressure vessel/vacuum vessel -Capacity: 455 L -Operating pressure: max. 13 bar -Accessories: incl. mounted parts, see photos -Quantity: 1x vessel available -Dimensions: 1020/755/H1900 mm -Weight: 518 kg/unit

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces represent an ideal solution for energy utilization in woodworking industrial and craft enterprises. They are designed for heating larger usable areas, such as workshops and production halls in craft and industrial operations. These hot air systems require no long heat-up phases and can quickly heat the workshop, joinery, or other production areas. Fuel used includes solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages required by the 1st German Federal Emission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90 % - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical details, please refer to the attached datasheet Godpfjvz Hq Tex Ah Dsbu The two pipe connectors for outgoing hot air are located at the rear lower section of the furnace. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Leto izdelave: 1994, Stanje: rabljeno, Desiccant Air Dryer – Single Dryer KOCH CKT 300, 300 m³/h, Year of manufacture: 1994, Price: €4,900, Contact: Mr. Rainer Eckerle Gsdpfxob Hu S Te Ah Debu

Stanje: rabljeno, Compressed Air Tank 20,000 Liters Manufacturer: OKS Capacity: 20,000 liters Operating Overpressure: +11 bar Test Pressure: +14.3 bar Operating Temperature: +50°C Dimensions: Total Height: 7,010 mm Cylindrical Height: 5,710 mm Diameter: 2,000 mm In the Cylinder: 1 x Manhole (320 x 420 mm) 3 x Female Threaded Sockets 1" 1 x Flanged Nozzle DN100 PN16 DIN 2633 In the Top Head: 1 x Female Threaded Socket 1" 2 x Lifting Lugs Gbsdpfswrn N Rsx Ah Dou In the Bottom Head: 1 x Female Threaded Socket 1" 4 x Pipe Supports Includes complete technical pressure vessel documentation

Stanje: novo, Heating capacity: 30 kW Dimensions (L/W/H): 105 cm x 60 cm x 147 cm - NEW - Kanuk Turbo 2 *new design* Hot air furnace Gsdpfx Ahjvxa Ite Djbu incl. heat exchanger and warm air blower Nominal heat output: 30 kW Dimensions: 105 cm x 60 cm x 147 cm Heatable room volume: 1,000 m³ Log length: 80 cm Efficiency: 82.4 % Flue pipe connection: 150 mm Ref. No.: 2100006

Stanje: zelo dobro (rabljeno), From federal stocks, we can offer you these top-maintained MAC 100 S breathing air compressors by the global brand Dräger – directly from the first owner! The MAC 100 S is capable of delivering ultra-pure breathing air in accordance with EN 737-3 for hospitals and other medical facilities, with a continuously adjustable output range from 0 to 6 bar. The unit operates extremely quietly and is suitable for continuous operation throughout the day. Both maintenance flaps allow easy access to all components, and all filters can be changed within minutes. Technical data: WxHxD: 630 x 884 x 690 mm Godpfx Ajitcx Teh Dobu Weight: 115 kg Power supply: 230 V / 50 Hz Current consumption: 6.0 Amps Sound pressure level: max. 50 dB(A) The devices have been consistently stored in special wooden crates and were only operated during annual inspections and maintenance—run times for each unit are between just 30 and 100 hours. Included in the scope of delivery are the device itself, the transport crate, and an operating manual. All units are in excellent optical and technical condition, with no damage—minor scratches or discolorations may occur but are solely due to maintenance work and in no way affect the functionality of the equipment. The total system weight including accessories and box is approx. 210 kg. Sale is exclusively to commercial customers; of course, you will receive an invoice with VAT shown. Private buyers have the option to purchase the equipment "on behalf of a customer"; a direct commercial sale to private individuals is expressly excluded! The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to compensation claims arising from grossly negligent or intentional breaches of the seller's obligations, as well as in the event of injury to life, body, or health. For inquiries regarding prices or technical details, please do not hesitate to contact us at the address provided.

Leto izdelave: 1990, Stanje: dober (rabljeno), Heat exchanger, cooling coil, cooling tube, cooling spiral, shell-and-tube heat exchanger -Manufacturer: Bloksma, shell-and-tube heat exchanger -Type: B13-2Z-04 B13-3H7-15D -Operating pressure: 6.5 / 3.5 bar -Dimensions: 2235/340/H155 mm Gbodpfx Ahjwu Tk So Dou -Weight: 61 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industries and workshops. They are designed to heat larger areas such as factory halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up periods and can warm production halls, joineries, or carpentry shops as well as other production sites in a very short time. Solid wood and its by-products (e.g., solid timber board scraps, chips, sawdust, pellets, or briquettes) are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the German 1st BImSchV. - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow: 4,900 m³/h - Combustion chamber depth: 650 mm - Feed door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Combustion chamber negative pressure: 0.2-0.3 mbar - Flue draught requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ Gbsdpfxovz Hq He Ah Deu - Heatable floor area: approx. 220 m² - Required space: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney pressure: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 200 mm - Further technical details can be found in the attached data sheet The two hot air outlet pipes are located at the lower rear side of the furnace. A maximum of 20 meters of pipe per outlet is permitted for air distribution.

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 1.000 m³/h, skupna širina: 1.020 mm, skupna dolžina: 1.680 mm, skupna višina: 2.460 mm, skupna masa: 1.540 kg, obratovalni tlak: 10 letvica, vhodna napetost: 400 V, moč: 14,2 kW (19,31 KM), One (1) heat-regenerating compressed air adsorption dryer. The dryer was in operation from 2014 to 2017. The unit has been out of service since 2017. The compressed air was supplied by an oil-free Atlas Copco ZR3 compressor with 132 kW power. Manufacturer: Donaldson Filtration Deutschland GmbH Model: HRS 1000 Year of manufacture: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions (L x W x H): 1680 mm / 1020 mm / 2460 mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated alumina Gedpfx Aher A El Ee Dsbu Desiccant middle (40 cm): 2 mm activated alumina Desiccant top (remaining to the top): silica gel beads The dryer has already been dismantled and is available immediately. The desiccant was vacuumed from the vessel and sorted by type in airtight bags. The desiccant is still in a usable condition; it is not oiled or contaminated. External re-drying of the desiccant is possible. TÜV has inspected the vessels internally and an expert opinion is currently being prepared. “Loose deposits at the lower part of the dished head” (photos to follow).

Stanje: rabljeno, Leto izdelave: 2003, Compressed Air Tank made of Steel (galvanized) Technical Specifications / Data: Available Quantity: 1 Volume: 5,000 liters Tank Type: Pressure vessel External Diameter: 1,400 mm Cylindrical Height: 2,870 mm Overall Height: 3,710 mm Operating Pressure Type: Overpressure Operating Pressure: 11 bar Operating Temperature: -10 / +50 °C Features: Top Head: 2 x Lifting lugs 1 x Vent Gedpev Hmd Djfx Ah Dsbu Shell: 1 x Manhole 2 x 2" sockets 1 x 1 1/2" socket 2 x DN 80 flange nozzles Bottom Head: 3 x Pipe feet 1 x 3/4" socket at the outlet For further equipment see photos

Stanje: novo, - NEW - Kanuk® Original Hot Air Stove Nominal heat output: 15.4 kW Gbodpfxsvwf Rks Ah Dou Dimensions: 80 x 58 x 95 cm Heatable room volume: 450 m³ Efficiency: 83.4 % Log length: 48 cm Flue pipe connection: 160 mm Total output (kW): 15.4 Dimensions H x W x D (cm): 80 / 58 / 95 Room heating capacity (m³): 450 Flue pipe connection (mm): 160 Flue pipe connection: top / rear Viewing window (cm): 28 x 15 Efficiency (%): 83.3 Weight (kg): 148 Flue gas temperature (°C): 216 Log length (cm): 48 Wood consumption (kg/h): 3.9 Flue gas mass flow (g/s): 14.28 Minimum chimney draft (Pa): 16 Flue gas throttle: No Combustion chamber H x W x D (cm): 40 x 44 x 49.5 Ash box: No Design type 1 (self-closing door): Optional Airwash system: Yes BimSchV Level 2: Yes Firewood, wood briquettes: Yes DIN EN number: 13240 Lignite briquettes: No AT §15a B-VG standard: Yes Primary, secondary, tertiary air: Yes CE marking: Yes External air connection (mm): 100 LRV Switzerland: Yes No. 2100102

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, A refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the airflow. Refrigeration dryers are essential in applications where moist air could cause corrosion, contamination, or damage to tools, machines, or products. By removing moisture, the dryer enhances the reliability and durability of compressed air systems. The refrigerated dryer is engineered for maximum efficiency and durability. Key structural components include: 1. Air-to-air heat exchanger In the first stage of the process, incoming air passes through the heat exchanger, where it is pre-cooled by the cooler air exiting the evaporator. The use of a counterflow design allows for efficient heat recovery, increasing the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the condensation of water vapor and oil particles present in the air. 3. Condensate separator After cooling, the air and condensate mixture flows into an efficient separator, where the condensate is separated and automatically discharged from the unit. 4. Fan control system The variable speed fan technology enables intelligent adjustment of cooling intensity according to actual demand, which reduces energy consumption and increases the service life of the components. Technical specifications Inlet/outlet pipe diameter (BSP): 1 1/2" Maximum operating pressure: 10 bar Gbodpfemt Dcqex Ah Dou Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 3,800 l/min Power: 0.9 kW Supply voltage: 230 V Dimensions (L x W x H): 850 x 480 x 480 mm Weight: 95 kg Type and amount of refrigerant: R410a, 650 g

Stanje: dober (rabljeno), Heat exchanger, cooling coil, cooling tube, cooling spiral, shell and tube heat exchanger -Manufacturer: Funke, shell and tube heat exchanger -Type: unfortunately no type designation -Dimensions: 1050/550/H250 mm -Weight: 91 kg Gbjdpfx Aewu Tamsh Dsu

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industry and craft enterprises. They have been specifically designed for heating large work areas, such as workshops and workspaces in trade and industrial businesses. These hot air systems require no lengthy preheating phases and quickly warm up carpentry or joinery shops as well as other production facilities. Suitable fuels include solid wood and wood processing by-products, such as solid wood panel residues, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392/CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the required emission values in accordance with the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirements: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference): 350 mm - Efficiency: 85–90% - Chimney pressure: 11.5 Pa - Flue gas temperature: 289°C - Hot air outlet connectors: 2 x Ø 450 mm - For further data, please refer to the attached data sheet The two pipes for the outgoing hot air are located at the lower rear of the furnace. For each pipe, a maximum duct length of 20 meters is permissible for air distribution. Greater lengths are optionally available by agreement with the manufacturer. Please contact us for details. Gbodpevz Hqyofx Ah Dou

Stanje: novo, - NEW - Without side cladding and without base frame Kanuk® Original Warm Air Furnace - Firebox opening H x W (cm): 90 / 64 - Flue pipe connection: top / rear Godpfjvwfz Ajx Ah Debu - Efficiency (%): 85.2 - Log length (cm): 55 - Minimum chimney draft (Pa): 16 - Ash pan: No - BimSchV Stage 2: Yes - Lignite briquette: No - CE mark: Yes - Total output (kW): 26 - Space heating capacity (m³): 1000 - Viewing window (cm): 34.5 x 22 - Weight (kg): 193 - Wood consumption (kg/h): 6.5 - Flue gas throttle: No - Design type 1 (self-closing door): Optional - Split logs, Wood briquettes: Yes - AT §15a B-VG Standard: Yes - External air supply connection (mm): 120 mm - Dimensions H x W x D (cm): 90 / 64 / 110 - Flue pipe connection (mm): 160 - Door diameter (cm): 28 - Flue gas temperature (°C): 229 - Flue gas mass flow (g/s): 18.5 - Firebox H x W x D (cm): 50 x 55 x 55 - Air wash system: Yes - DIN EN number: 13240 - Primary, secondary, tertiary air: Yes - LRV Switzerland: Yes No. 2100109

Stanje: dober (rabljeno), Heat exchanger, cooling coil, cooling tube, cooling spiral, shell-and-tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, shell-and-tube heat exchanger -Type: BOF 807-0-4 -Volume: Shell side bronze 35.6 l / Tube side copper 15.3 l -Operating overpressure: max. 16 / 10 bar -Dimensions: 2480/360/H350 mm -Weight: 236 kg Gbedswu S Tfepfx Ah Dju

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot air furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industry and craft businesses. They are designed for heating larger utility areas such as workshop halls and workspaces of industrial and artisanal enterprises. These hot air systems require no long warm-up phases and quickly heat up the workshop, carpentry, or other production facilities in a short time. Solid wood and its by-products, e.g., solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, can be used as fuel. MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the machinery safety directive 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output (kcal): 12,720 - Fuel consumption: 4.5 kg/h - Air flow: 2,400 m3/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Combustion chamber negative pressure: 0.2 – 0.3 mbar - Draft requirement (nominal output): 0.18 mbar - Heatable room volume: approx. 300 m3 - Heatable area: approx. 60 m2 - Space requirements: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Required chimney draft: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet Gbedpfjvz Hqtox Ah Dju The two hot air outlet pipe connections are located at the rear bottom of the unit. A maximum duct length of 20 meters per outlet is permitted for air distribution.

Stanje: dober (rabljeno), Heat exchanger, cooling coil, cooling tube, cooling spiral, shell-and-tube heat exchanger, seawater heat exchanger - Manufacturer: Funke, shell-and-tube heat exchanger - Model: BOF 806-0-4 - Capacity: Shell side 50.7 l / Tube side 22.0 l - Operating overpressure: max. 16 / 10 bar Godswu S Rqopfx Ah Djbu - Dimensions: 2120/285/H305 mm - Weight: 146 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide the ideal solution for energy utilization in wood processing industries and workshops. Designed for heating large utility areas such as factory halls and workspaces in craft and industrial operations, these hot air systems require no prolonged preheating phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Fuel materials include solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety directive of machinery 89/392 CE. All MARTINA Series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission values required by Germany’s 1st BImSchV regulation. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air fan: 0.49 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Footprint required: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet nozzles: 2 x Ø 200 mm - Further technical data available in the attached data sheet The two hot air outlet connections are located at the rear lower section of the furnace. Each outlet may be connected with a maximum pipe length of 20 meters for air distribution. Gbedpfxsvz Hqms Ah Dju

Stanje: dober (rabljeno), Leto izdelave: 1992, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure boiler, compressor tank, compressed air container - Manufacturer: Zeidler & Uhl, vertical vacuum vessel, galvanized Gjdpfewra H Iex Ah Dsbu - Capacity: 455 L - Operating pressure: -0.6 bar / max. 16 bar - Accessories: incl. attachments, see photos - Quantity: 2 vessels available - Price: per unit - Dimensions: 860/650/H1610 mm - Weight: 374 kg/unit

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 Gbsdpfx Asvz Hqgsh Dsu MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger usable areas such as factory halls and workspaces in industrial and craft enterprises. These hot air systems do not require long heat-up periods and can quickly warm up workshops in joineries, carpentries, or other production facilities. Fuel materials include solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU directive 98/37CE (Italian Presidential Decree No. 459 of July 24, 1996) and safety directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission standards stipulated by the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 kcal - Fuel consumption: 50 kg/h - Air delivery rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (outlet): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located at the rear of the furnace at the bottom. Each pipe connector allows a maximum of 20 meters of ducting for air distribution.

Stanje: rabljeno, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure boiler, compressor tank - Capacity: 11.5 ltr Gsdpod Atx Ejfx Ah Dobu - Permissible operating overpressure: 17 bar - Dimensions: 270/250/H480 mm - Weight: 8 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed to heat large usable areas, such as workshops and workspaces in craft and industrial facilities. These warm air systems require no long preheating phases and heat the workshop or production space – such as in carpentry or joinery shops – within a very short time. They can be fueled with solid wood and its by-products, e.g., solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37CE, Presidential Decree Italy No. 459 dated July 24, 1996, and Safety Directive 89/392 CE. All MARTINA series warm air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both levels of the 1st BImSchV prescribed emission limits. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 Kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air fan: 1.05 kW / 230 V Gbjdpfx Ahovz Hhxe Deu - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable surface: approx. 500 m² - Required space: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (outlet): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90 % - Chimney draft: 16 Pa - Flue gas temperature: 287 °C - Warm air outlet sockets: 2 x Ø 220 mm - For further details, please refer to the attached data sheet. The two pipe flanges for warm air discharge are located at the rear bottom of the furnace. A maximum pipe length of 20 meters is permitted per flange for air distribution.

Stanje: rabljeno, Oil filling station, compressed air pump for fresh oil, remote oil unit, oil dispensing device, oil filling device, oil transfer pump, gearbox oil pump, hydraulic oil pump, oil centrifuge gearbox oil pump - Powered: pneumatic - Hose reel - Hose: 6 m - Hand valve with quantity indicator - Quantity: 3 pumps with reel available Gbodpfob A Hzxex Ah Deu - Price: per unit - Weight: 60 kg/unit

Leto izdelave: 1975, Stanje: rabljeno, Compressed Air Breathing Apparatus - Electric pump with emergency hand crank - Manifold with pressure gauge - Hose - Case Godpfx Aob A H Ntjh Debu - Handover: as-is condition, as inspected - Weight: 100 kg