Zrak Zrak Toplotni Izmenjevalec nakup rabljenega (3.127)

Stanje: dober (rabljeno), Heat exchanger, cooling coil, cooling tube, cooling spiral, shell-and-tube heat exchanger, seawater heat exchanger - Manufacturer: Funke, shell-and-tube heat exchanger - Model: BOF 806-0-4 - Capacity: Shell side 50.7 l / Tube side 22.0 l - Operating overpressure: max. 16 / 10 bar Gsdpfewu S Rqex Afqeil - Dimensions: 2120/285/H305 mm - Weight: 146 kg

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, • Vrsta stroja: tlačna posoda (posoda za stisnjen zrak) • Oznaka izdelka: tlačna posoda • CE označeno: Da (CE 0045) Proizvajalec • Proizvajalec: Hohener GmbH & Co. • Kraj izdelave (po tipski ploščici): Nemčija Identifikacija • Tip: tlačna posoda • Serijska številka: 86583 Giedsx Iuktjpfx Afqsl • Leto izdelave: 2007 Medij • Dovoljeni medij: Zrak Dušik (N₂) Argon (Ar) Kapaciteta • Prostornina posode: 10.000 l Podatki o tlaku (tipska ploščica) • Največji dovoljeni tlak (PS max): 11 bar • Najmanjši dovoljeni tlak (PS min): 0 bar Podatki o temperaturi (tipska ploščica) • Največja dovoljena temperatura (T max): 50 °C • Najmanjša dovoljena temperatura (T min): −10 °C

Stanje: rabljeno, Leto izdelave: 2009, 1 kos mobilne kompleta kompresorske naprave SCHNEIDER MAS650-10-90D-SILEND premična, sesalna zmogljivost 650 l/min, polnilna zmogljivost 520 l/min, nazivna moč motorja 4 kW, napetost 4 kW, skladno s slikami in ogledom Barva: siva Leto izdelave: 2009 Stanje: rabljeno Gjdpfox Ifp Tox Afqsil Način plačila: predplačilo z nakazilom Lokacija blaga: delavnica Dostava: Samo osebni prevzem – Dostava za ta artikel ni mogoča!

Leto izdelave: 2025, Stanje: novo, The refrigeration compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or finished products. By eliminating moisture, the dryer increases the reliability and longevity of compressed air systems. The refrigeration dryer has been engineered for maximum efficiency and durability. Key construction features include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through a heat exchanger where it is pre-cooled by the outgoing air leaving the evaporator. The use of counterflow maximises heat recovery and the overall energy efficiency of the system. Gijdsmt Dcfepfx Afqol 2. Refrigeration circuit evaporator In the second stage, compressed air is routed through the evaporator, where it is cooled to the dew point temperature of 3°C. This results in condensation of water vapour and oil particles present in the air. 3. Condensate separator After cooling, the gas-condensate mixture is directed to a high-efficiency separator, where condensate is separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity to match actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 2800 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 420 x 700 x 690 mm Weight: 37 kg Type and amount of refrigerant: R134a, 550 g

Stanje: rabljeno, Leto izdelave: 2021, Maks. tlak: 16 bar Moč: 0,81 kW Gijdpfx Aexz Al Nefqjl

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C Gjdjvz Hq Tjpfx Afqeil - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: dober (rabljeno), Leto izdelave: 1990, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure boiler, compressor tank, compressed air vessel -Manufacturer: Zeidler & Uhl, upright pressure vessel/vacuum vessel Godpfx Aewwg Aaofqeil -Capacity: 455 L -Operating pressure: max. 13 bar -Accessories: incl. mounted parts, see photos -Quantity: 1x vessel available -Dimensions: 1020/755/H1900 mm -Weight: 518 kg/unit

Stanje: novo, - User-friendly operating concept - Efficient design for cost-effective and safe operation - Cooling fan with variable speed control from 0–100%, eliminating the need for the conventional pressure switch and thermostat for fan control - Fewer wearing parts while maintaining a constant pressure dew point - Control system displays five different alarm statuses and retains them in memory - Refrigeration compressor shuts off at ambient temperatures below 15°C if there is no compressed air flow - Clear layout and easy access to all maintenance components - Integrated automatic condensate drain Key Advantages at a Glance - High economic efficiency - Excellent price-performance ratio - No unnecessary compressed air losses thanks to the integrated electronic condensate drain - Connected tools and machines are optimally protected - User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and Weights: - Length (product) approx.: 325 mm - Width/Depth (product) approx.: 430 mm Giedpfx Asu T Hrvofqsl - Height (product) approx.: 445 mm - Weight (net) approx.: 24 kg

Stanje: novo, Leto izdelave: 2025, New KAESER Compressed Air Receiver 10,000 Liters, Vertical, Galvanized 16 bar Incl. pressure gauge and fitting set Year of manufacture: 2025 High-quality compressed air receiver with galvanized finish. Galvanized inside and outside to DIN EN ISO 1461 by hot-dip process. Connection nozzles for tapered threads. Technical Data: Volume: 10,000 liters Max. overpressure: 16 bar Diameter: 1,600 mm Tank height: 5,415 mm Weight: 2,550 kg Compressed air inlet connection: 2x DN 200 Compressed air outlet connection: 2x DN 200 Safety valve connection: G 2" Pressure gauge connection: G ½ Condensate drain connection: G 1½ Tank acceptance: RL 2014/68/EU Service openings according to AD2000: 1x manhole Min. operating temperature: -10°C Giedpjkzizgsfx Afqjl Max. operating temperature: +50°C Surface coating: galvanized Convenient leasing for new machines available via our partner bank. Visit our showroom. We always have a large selection of new and used compressors.

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, A refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the airflow. Refrigeration dryers are essential in applications where moist air could cause corrosion, contamination, or damage to tools, machines, or products. By removing moisture, the dryer enhances the reliability and durability of compressed air systems. The refrigerated dryer is engineered for maximum efficiency and durability. Key structural components include: Gisdpemt Dcqjfx Afqel 1. Air-to-air heat exchanger In the first stage of the process, incoming air passes through the heat exchanger, where it is pre-cooled by the cooler air exiting the evaporator. The use of a counterflow design allows for efficient heat recovery, increasing the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the condensation of water vapor and oil particles present in the air. 3. Condensate separator After cooling, the air and condensate mixture flows into an efficient separator, where the condensate is separated and automatically discharged from the unit. 4. Fan control system The variable speed fan technology enables intelligent adjustment of cooling intensity according to actual demand, which reduces energy consumption and increases the service life of the components. Technical specifications Inlet/outlet pipe diameter (BSP): 1 1/2" Maximum operating pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 3,800 l/min Power: 0.9 kW Supply voltage: 230 V Dimensions (L x W x H): 850 x 480 x 480 mm Weight: 95 kg Type and amount of refrigerant: R410a, 650 g

Stanje: rabljeno, Rezervoar za stisnjen zrak, tlačna posoda KAESER Tovarniška št.: 481127K Leto izdelave: 2001 Prostornina rezervoarja: 1000 litrov Obratovalni tlak: 11 barov - Tlačna posoda vroče cinkana - 3 priključne spojke z navojem 2" - 2 priključni spojki z navojem 1 1/2" - 3 priključne spojke z navojem 1/2" - 2 majhni čistilni odprtini - 3 krogelni ventili - 1 varnostni ventil - Manometer za tlak - 2 žerjavna ušesa na vrhu rezervoarja Premer rezervoarja: cca 800 mm Skupna višina: 2300 mm z nosilcem (brez priključkov) Gisdpfxjxpqzuj Afqsl Teža: 230 kg Dobro ohranjen

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar Giodpfx Afovz Hq Hoqol - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Leto izdelave: 1996, Stanje: dober (rabljeno), Compressed air breathing apparatus, respiratory protection - 2-cylinder unit Godpfx Aeb A H Afefqoil - Positive pressure system with: pressure reducer - High-pressure gauge - Breathing regulator with: integrated warning device - Thread connection: M 45 x 3

Stanje: rabljeno, SPLOŠNO Izmenjevalna površina: 9,08 m² Lokacija: Bremen Tehnična dokumentacija: risba Tipna ploščica: Stanje: rabljeno Zadnja uporaba: farmacevtska kemija PLAŠČNI PROSTOR Volumen plaščnega prostora: 40 litrov CEVNI PROSTOR Volumen cevnega prostora: 35 litrov Material plašča: AISI316 (V4A) 1.4404 Material cevi: AISI316 (V4A) 1.4404 Maks. dovoljen obratovalni nadtlak plaščnega prostora: 5,0 bar Maks. dovoljen obratovalni podtlak plaščnega prostora: 1,0 bar Maks. dovoljena obratovalna temperatura plaščnega prostora: 200°C Giodpfx Asxqclhofqjl Maks. dovoljena obratovalna temperatura cevnega prostora: 200°C Maks. dovoljen obratovalni nadtlak cevnega prostora: 5,0 bar

Leto izdelave: 2025, Stanje: novo, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigerated dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and service life of compressed air systems. The refrigerated dryer has been engineered for maximum efficiency and durability. The main design components include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Thanks to the counterflow operation, heat recovery increases the overall energy efficiency of the system. 2. Refrigeration circuit evaporator Gisdemt Dbhopfx Afqjl In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point temperature of 3°C. This condenses the contained water vapor and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture goes to a highly efficient separator, where condensate is separated and automatically discharged from the device. 4. Fan control system Variable-speed fan technology allows for intelligent adjustment of cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/Outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 1500 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 380 x 600 x 625 mm Weight: 31 kg Refrigerant type and amount: R134a, 400 g The listed price is NET. Transport costs are not included in the price. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm Gsdpfx Afovz Hqyeqoil - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Leto izdelave: 1990, Stanje: dober (rabljeno), Heat exchanger, cooling coil, cooling tube, cooling spiral, shell-and-tube heat exchanger -Manufacturer: Bloksma, shell-and-tube heat exchanger -Type: B13-2Z-04 B13-3H7-15D -Operating pressure: 6.5 / 3.5 bar -Dimensions: 2235/340/H155 mm -Weight: 61 kg Gjdpfxswu Tk Ss Afqjil

Stanje: rabljeno, GÉNÉRAL Surface d’échange: 11,5 m² Diamètre extérieur: 720 mm Diamètre intérieur: 540 mm Hauteur totale: 2 200 mm Isolation: présente Divers: bosses sur la gaine d’isolation ; un échangeur thermique présente une hauteur totale d’env. 230 mm supérieure en raison d’un raccord à bride Emplacement: Brême Documentation technique: dessin Plaque signalétique: État: occasion Dernière utilisation: chimie pharmaceutique ISOLATION Matériau du manteau isolant: Aluminium CÔTÉ ENVELOPPE Volume côté enveloppe: 226 litres CÔTÉ TUYAUTERIE Volume côté tubes: 50 litres Matériau de l’enveloppe: AISI316 (V4A) 1.4404 Matériau des tubes: AISI316 (V4A) 1.4404 Surpression de service max. admissible (côté enveloppe): 4,2 bars Dépression de service max. admissible (côté enveloppe): 1,0 bar Giedpfx Asxqckwefqsl Température de service max. admissible (côté enveloppe): 200°C Température de service max. admissible (côté tubes): 200°C Surpression de service max. admissible (côté tubes): 5,0 bars

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar Gedpfx Asvz Hqtefqeil - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: dober (rabljeno), Leto izdelave: 1992, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure boiler, compressor tank, compressed air container Giedpswra H Iefx Afqjl - Manufacturer: Zeidler & Uhl, vertical vacuum vessel, galvanized - Capacity: 455 L - Operating pressure: -0.6 bar / max. 16 bar - Accessories: incl. attachments, see photos - Quantity: 2 vessels available - Price: per unit - Dimensions: 860/650/H1610 mm - Weight: 374 kg/unit

Leto izdelave: 2006, Stanje: rabljeno, SPLOŠNO Gijdpfxoxqch Ne Afqsl Izmenjevalna površina: 24,7 m² Leto izdelave: 2006 Notranji premer: 508 mm Skupna višina: 1.340 mm Skupna dolžina: 3.270 mm Lokacija: Bremen Tehnična dokumentacija: risba, TÜV papirji, certifikat o prevzemu, CE oznaka in izjava o skladnosti Oznaka tipa: Stanje: rabljeno Zadnja uporaba: metanolni kondenzator PLAŠČNI PROSTOR Volumen plaščnega prostora: 390 litrov CEVNI PROSTOR Volumen cevnega prostora: 150 litrov Material plašča: AISI316 (V4A) 1.4571 Material cevi: AISI316 (V4A) 1.4571 Število cevi: 63 Najv. dovoljen obratovalni nadtlak v plaščnem prostoru: 0,49 bar Premer cevi: 25 mm Najv. dovoljena obratovalna temperatura v plaščnem prostoru: 100 °C Najv. dovoljena obratovalna temperatura v cevnem prostoru: 100 °C Najv. dovoljen obratovalni nadtlak v cevnem prostoru: 6,0 bar

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ Giedpfx Ajvz Hqmofqjl - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: rabljeno, SPLOŠNO Izmenjevalna površina: 0,99 m² Zunanji premer: 200 mm Notranji premer: 86 mm Skupna dolžina: 2.120 mm Izolacija: prisotna Ostalo: zunanji premer cevi pribl. 10 mm Lokacija: Bremen Tipna ploščica: Stanje: rabljeno Zadnja uporaba: farmacija IZOLACIJA Material izolacijskega plašča: nerjaveče jeklo PLAŠČNI PROSTOR Volumen plaščnega prostora: 7 litrov CEVNI PROSTOR Volumen cevnega prostora: 3 litre Material plašča: AISI316 (V4A) 1.4571 Število cevi: 20 Maks. dovoljen delovni nadtlak v plaščnem prostoru: 6,0 bar Dolžina cevi: 1980 mm Premer cevi / mm: 8 mm Gsdpfoxqchvox Afqsil Maks. dovoljena delovna temperatura cevnega prostora: 144 °C Maks. dovoljen delovni nadtlak cevnega prostora: 7,0 bar

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h Giedjvz Hqgopfx Afqel - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h Gijdsvz Hhxjpfx Afqol - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.