Sušilnik suhega zraka Koch

KOCH Trockenluftbehälter (art.2295)

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 COOLING SYSTEM GMP150+2xPTUN2000 As new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following components: • Hopper. • Support frame. • Heating chamber. • Connection lines. • Air control valves. Pedpfjvhb S Sex Agxopr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of manufacture: 2008 Gravimetric dosing and mixing unit, designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. Real, measured, and weighed quantities are continuously compared with setpoint values via a modern microprocessor-based control system, ensuring very high recipe accuracy (+/- 0.1%) thanks to continuous automatic optimization. The complete unit includes: - 2 supply hoppers for virgin material or regrind/virgin material - 2 supply hoppers for masterbatch or additives - 2 pneumatically controlled conical dosing heads - 2 precision motor-driven dosing screws - Material hoppers – capacity approx. 7 liters - Weighing hopper – capacity approx. 0.8 liters - Mixing hopper – capacity approx. 3.0 liters - Manually operated slide valve - GRAVInet controller with color touch panel, enabling recipe, regrind and process data management, vibration compensation, and continuous automatic optimization; built-in Ethernet port and standard reporting/printing functions. Pjdpewm Ii Tefx Agxjpr Technical data: - Average output: 60 kg/h - Main component dosing range: 1–100% - Additive dosing range: 0.5–10% - Power supply: 1/N/PE 230 V 50 Hz - Power consumption: 100 W - Compressed air: 6–8 bar, oil- and water-free - Weight: approx. 60 kg ✅ Piovan material loaders as shown in the photos are included in the offer.

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Maximum throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame structure, level control valve, inspection hatch, and documentation. Podpeh Akm Tjfx Agxspr

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 100 t Column gap: 1900 mm Pedpfxevuui De Agxspr Stroke: 500 mm Distance table/ram, stroke up: 800 mm Table surface: 1850 x 1000 mm Table through-hole: 160 mm Table height above floor: 850 mm Ram surface: 1850 x 800 mm Lateral column clearance: 540 mm Descent speed: from 400 mm/s Return speed: 400 mm/s Working speed: 20 - 70 m/min Oil capacity: 900 l Drive power: 34.0 kW Weight: 13.0 t Space requirements (WxDxH): 2.7 x 2.2 x 4.0 m Approved for manual loading/handling as per German accident prevention regulations (UVV) Equipped with oil-hydraulic drive, hydraulic stroke shock absorption, hydraulic ram locking No foundation pit required Can be offered as-is (non-operational), operational as-is, or alternatively retrofitted with new Siemens S7-1500 F control system.

Leto izdelave: 1965, stanje: pripravljen za uporabo (rabljen), Suitable for the production of rigid PVC films with a minimum plasticizer content of 3%. Number of rolls: 5. Supplied with documentation. Retrofitted in 2003 and 2017. Psdpfx Agjquu Ttsxopr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Injection Moulding Machine KRAUSS MAFFEI KM 4000-24500 MC with optional ESS Energy Saving System Basic data Manufacturer: KraussMaffei Model: KM 4000-24500 MC Year of manufacture: 2003 Control system: MC4 Software languages: German, English, Swedish Clamping unit Clamping force: 40,000 kN Opening force: 2,525 kN Platen dimensions: 3315 × 2920 mm Tie bar spacing: 2240 × 1800 mm Mould opening stroke: 3,100 mm Minimum mould height: 1,100 mm Maximum mould height: 2,000 mm Maximum daylight: 4,200 mm Ejector stroke: 350 mm Ejector force: 772 / 368 kN Injection unit (HPS-AT) Screw diameter: 150 mm L/D ratio: 23 Max. injection pressure: 1,843 bar Injection volume: 13,254 cm³ Shot weight (PS): 12,061 g Injection rate: 1,431 cm³/s Plasticising rate: 266 g/s Electro-hydraulic system Hydraulic pump motor power: 200 kW Heater power: 159 kW Number of heating zones (cylinder): 7 Dry cycle time (EUROMAP 6): 270 cycles/h Hydraulic oil tank capacity: 2,700 l Psdpfxeyuf N Ee Agxepr Machine dimensions and weight Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m Machine weight: 247 t Maximum mould weight: 90,000 kg Optional ESS energy saving system (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, significantly improving the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency converter, which adjusts the motor’s rotational speed to the actual machine demand during the production cycle. As a result, electrical energy is consumed only when it is truly needed. Key benefits of the ESS system: - Reduction of electricity consumption by up to 30% - Servo drive technology for the hydraulic pump - Global quality and proven technology used in the plastics processing industry - Reduced energy consumption during machine idling - Lower heat generation in the hydraulic circuit - Extended service life of the motor and hydraulic components - Possible retrofitting to existing hydraulic injection moulding machines without interfering with the machine's structure The ESS system is a modern solution that significantly lowers the operating costs of an injection moulding machine while maintaining full production parameters.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, skupna masa: 800 kg, moč: 19,5 kW (26,51 KM), kapaciteta rezervoarja: 200 l, volumenski pretok: 350 m³/h, Sušilnik s suhim zrakom z zalogovniki za granulát in separatorji materiala Proizvajalec: Piovan Tip: DSN521NE Št.: ODE 6242 Ppodpfex Na Itex Agxjr 4 izolirani zalogovniki za granulát, vsak s prostornino 200 L Z dodatnim gretjem 3 separatorji materiala Proizvajalec: Colortronic Naprava je bila preverjena v vseh funkcijah in je popolnoma delujoča!

Stanje: zelo dobro (rabljeno), Hydraulic motor for Krauss Maffei injection molding machines. Pedpfxjx Uqv So Agxopr MOS 6500-30-168