Zamrznjenih Celic nakup rabljenega (169)

Stanje: zelo dobro (rabljeno), Here we offer a Feutron climate test chamber. Feutron climate test chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0...± 1.5 K/min - Rate of temperature change: - Heating: 2.0 K/min (average) - Cooling: 2.0 K/min (average) - Standard IEC 1646 is implementable including testing, solar modules up to a maximum weight of 160 kg, and non-linear ramps (setpoint jumps) Drying - Air drying: Condensation drying Humidity - Air humidification: Steam humidification - Humidity range: 10...95% RH - Temporal humidity deviation: ≤ ± 3.0...± 5.0% RH - Dew point range: 8...80.9°C Test Chamber - Test chamber volume: 7.0 m³ Dimensions - Test chamber internal dimensions (W x H x D): 1500 mm x 2250 mm x 2000 mm - Heated hinged door, DIN right, width: 900 mm x height: 2100 mm - Heated viewing window with blackout and lockable, width: 500 mm x height: 600 mm - Feedthrough openings: 2x on the right front side, Ø 75 mm - Irradiation unit inside test chamber - Cut-out: 4x in the left side wall for SC 2500, each 850 x 700 mm - Illuminated area with SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split condenser (for outdoor installation, winter mode) - Refrigerant: R507 / R23 Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Maximum radiation uptake: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Power Supply - Test Chamber - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: Hardwired - Maximum simultaneous power demand: approx. 32.0 kW - Circuit protection: 3 x 63, Char C (A) Power Supply - SolarConstant - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: — - Maximum simultaneous power demand: approx. 30.0 kW - Circuit protection: 3 x 63, Char C (A) External Dimensions (including machine room/control cabinet and SolarConstant 2500 cabinet): - Machine room / control cabinet: width 3440 mm x height 2580 mm x depth 2950 mm Ljdpfoklv H Iox Aacsrh - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - Split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Total test chamber weight: approx. 2700 kg - Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer any further questions you may have by phone.

Stanje: dober (rabljeno), TIRA Type: Walk-in Climate Simulation Chamber TTZ 4008 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Ljdeuvil Sspfx Aacerh Test chamber volume: 8 m³ External dimensions (W x D x H): approx. 2410 mm x 3920 mm x 2530 mm Test chamber (W x D x H): approx. 2002 mm x 2148 mm x 2005 mm Door opening (W x H): approx. 2002 mm x 2005 mm Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data. Specifications are subject to change!) Should you have further questions, we would be happy to answer them by phone.

Stanje: dober (rabljeno), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% rH Humidity tolerance: +/- 5.0% rH Dimensions: Lrodpfjuviydox Aacjh Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical Data Sun Simulation: Control unit: Mitronic STB1-8 Number of lamps: 8 Ballast: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Lamp type: OSRAM Powerstar HQI 2000W W/D/S Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications excepted!) Ljdeuvi Nfjpfx Aacorh If you have any further questions, we will be happy to answer them by phone.

Stanje: dober (rabljeno), TIRA Model: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 19 m³ Lrjdpfx Aaeuviumjcoh External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (See picture) (Technical data and specifications are subject to change and errors may occur!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), TIRA Type: TCZ 4022 S-2K Description: Air-cooled Climate Simulation Chamber System Configuration: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C - Temperature stability in supply air (temporal): ≤ ± 0.5°C (without thermal test room load, according to DIN 50011 Τ13 / EN 60068) - Temperature stability in supply air (spatial): ≤ ± 1.0°C (without thermal test room load, according to DIN 50011 / EN 60068) - Heating rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C - Cooling rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C Performance range for climate testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test room load) Lredpfovx S Hhex Aacoh - Dew point temperature range: +5...+89°C (without thermal test room load) - Humidity stability (in supply air, temporal): ≤ ± 2.5% r.h. (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test room load) - With max. 16 kW heat compensation - Dew point temperature range: +10...+74°C (without thermal test room load) Dimensions: - Test room (W x D x H): approx. 2260 x 4648 x 2260 mm - Outer dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test room door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design features: - Air routing: Supply air via perforated plate at rear wall, ceiling area; Exhaust air via perforated plate at rear wall, floor area - Temperature control: Direct cooling via refrigerant evaporation in finned heat exchanger; Heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in heat exchanger - Internal lining: Stainless steel; External cladding: Galvanized, powder-coated steel sheet - Floor design: Stainless steel; Floor load capacity: 15,000 N/m²; Wheel load (contact area ≥4cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, exterior painted with viewing window (W x H) 1000 x 1000 mm - Test room lighting: 4 spotlights, each 500 W - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Bltzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Complete unit: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification system: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Stanje: zelo dobro (rabljeno), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T = Temperature W = Walk-in -60 = Minimum temperature -60°C 9 = 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low noise, semi-hermetic, stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller Lredjvb E Uqjpfx Aacoh LCD control panel Digital display of setpoint and actual values Numeric input of setpoints Error messages in plain text RS 232 interface Free switching channels for customer-side test specimen control Technical Performance Data: Temperature testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rate, average with test specimen and radiant heat measured in supply air. Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test item: 420 kg solar cell modules, 100% with test Continuous radiant heat: 3000 W Technical data based on ambient temperature +25°C, nominal voltage 400 V, without test load, without radiation and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection class: IP54 Cooling water connections: coolant supply/return R1 ¼", internal thread Condensate drain, non-pressurized, R1", internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) For further questions, please call us.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text Ledpfxsvb Hane Aacerh RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: pripravljen za uporabo (rabljen), Rotacijski dozirnik, rabljeni stroj Skupne dimenzije: Dolžina: 860 mm Širina: 1280 mm Višina: 1090 mm Električni podatki: 400V Velikost celice: 200 x 350 mm Število celic: 6 Velikost lijaka: 340 x 210 mm Lrodewrm Ufjpfx Aacoh

Stanje: zelo dobro (rabljeno), CTS CW‑60/11 – Climate Test Chamber, Water-Cooled The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climate test chamber enables the evaluation of the function or material properties of a test object under the influence of temperature and humidity. The efficient air circulation with a high recirculated air volume ensures effective transfer to the specimen. The air handling unit is located at the rear of the chamber interior. The aggregates are mounted behind the unit in a separate frame, allowing good accessibility. The control system is housed in a separate switch cabinet, with the user interface integrated into the switch cabinet door. For dehumidification of the test chamber, a self-regenerating compressed air dryer is installed. Fresh air can be purged through the chamber via a blower. Technical Performance Data: Temperature Tests: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from wall - Temperature change rate (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests: - Temperature range: +10 °C to +95 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2% to ±5% r.h. *Without radiant heat, in stabilized conditions. Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, without test object, without irradiation and without additional equipment. Dimensions: Lodpsx Anipjfx Aacorh Internal Dimensions (Test Chamber / Usable Space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2100 mm, Depth: 2530 mm, Height: 2200 mm (slightly variable depending on configuration) External Dimensions: - Width: 2700 mm, Depth: 5200 mm, Height: 2520 mm (may vary depending on door, frame, accessories, etc.) Operating Data: - Nominal output: 84.4 kW - Nominal voltage: 400 V 3/N 50 Hz - Nominal current: 131.4 A Technical Specifications: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: - Inspection possible by appointment (46325 Borken) - Shipping via freight forwarding available – costs & arrangements upon request - Scope of delivery: (see picture) (Technical data subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: rabljeno, Dolžina: cca 2,6 m Lodjw Tmlljpfx Aacjrh Širina: cca 1,7 m Višina: cca 2,3 m Oprema: Hladilna enota (Technobloc, tip: ACN050U, moč: 0,7 kW, hladilno sredstvo: R404a)

Leto izdelave: 2021, Stanje: rabljeno, Dryer for 100 baskets. Ideally suited for larger farm shops, market vendors, and egg producers. Also suitable for delicatessen manufacturers for producing specialty pasta. All spare parts available. German premium quality. For sale for self-dismantling. Lrodpov Nkf Dofx Aacjh Due to staff shortages, the dryer was not put into operation. The dryer is in very good condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Our former assembly cell was in operation for only a few hundred hours (exact number unknown) and is no longer needed, as retrofitting to our new product is not worthwhile for us. The condition of all devices is very good due to the low usage—except for the batteries, which need to be replaced. The complete assembly/robotic cell has the following dimensions: Height: 169 cm, Width: 175 cm (150 cm + 25 cm), Depth: 130 cm, Weight: approx. 600 kg. The key components of the assembly/robotic cell are as follows: - Mitsubishi Robot Mod. RH-6SH5520-S312, year of manufacture 2010 - Mitsubishi Teaching Box Mod. R56TB, year of manufacture 2010 - 2x ETIPACK labeling device Mod. CLEAR13, year of manufacture 2010 Ljdpori S Hksfx Aacsrh Many further details can be seen in the photos and in the documentation; we are happy to provide additional information upon request.

Stanje: dober (rabljeno), Approx. 4 units h.a.l.m. solar cell measuring system, cetisPV-CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P complete device – used -: Price per unit ex stock: €8,350 (net) Complete IV Measurement System Manufacturer: H.A.L.M. Model: cetisPV Consisting of: CTL1, cetisPV-XF2-C, cetisPV-XF2-R, cetisPV-XF2-P complete device Year of manufacture: unknown Condition: good Lrodjukiu Nepfx Aacjh Available: immediately Location: Warehouse Frankenberg / Saxony

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Robotized 3D welding station consisting of a welding robot and two rotary tables. Dimensions of the rotary tables: 2000 mm x 1000 mm Includes: Ljdpfsp Am T Usx Aacorh - 2 x rotary tables with 3-phase SEW-EURODRIVE motors – dimensions of the tables: 2000 mm x 1000 mm - Welding wire feeder included - 7-axis robot manipulator OTC Daihen IRB-651 with linear track, teach pendant, and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 power supply for the welding robot inverter - 3-phase isolation transformer – NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation for the OTC Daihen robot The station is ready for immediate operation.

Stanje: novo, Ta ponudba je za popolnoma nov Harvest Right Large Pharmaceutical PRO liofilizator (sušilnik z zamrzovanjem), ki ga prodajamo kot zalogovniki v Združenem kraljestvu. Cena brez DDV: £5.950 Harvest Right Pro Pharmaceutical liofilizator odstranjuje vodo iz rastlin in organskih spojin medtem ko so zamrznjene. Tako ohranja svežino zelišč in rastlin ter zagotavlja, da se njihov videz, hranilna vrednost in učinkovitost ne spremenijo glede na sveže stanje. Liofilizacija popolnoma odstrani vodo v približno 24 urah. Nobena druga metoda konzerviranja ni tako hitra in učinkovita pri odstranjevanju vode, kar je ključno, saj daljše zadrževanje vode povečuje tveganje kvarjenja ter izgube hranil in učinkovitosti. Priloženo: - Veliki farmacevtski liofilizator - Premier vakuumska črpalka - Vakuumsko olje - Filter za olje - Komplet osmih pladnjev iz nerjavnega jekla - Priročnik za liofilizacijo Ključne lastnosti & prednosti: - Liofilizator ima vgrajeno inteligenco za popolnoma avtomatsko vodenje postopka sušenja Lrodsxx Agzopfx Aacsh - Avtomatsko prilagaja vakuum in temperaturo glede na material – ohranja svežino in učinkovitost - 0,95 m² (10,25 ft²) prostora za pladnje – skoraj dvojna zmogljivost v primerjavi s standardnim velikim modelom Harvest Right - Polica s 8 pladnji (vsak: 228,6 mm Š x 520,7 mm G x 19 mm V) - Zmogljivost ledu: 6 litrov - Teža: 68 kg Garancija: 1 leto mednarodne garancije proizvajalca Harvest Right Dimenzije: Zunanje mere: 514,3 mm (Š) x 603,2 mm (G) x 781 mm (V). Primerno za pult, voziček ali mizo. Električna priključitev Za delovanje je potrebna posebna 20A varovalka. Dostava: - Pošiljka liofilizatorja v enem paketu, skupna teža: 177 kg - Naprava bo dostavljena v mednarodnem zabojniku (zaboj je potrebno dodatno naročiti pri Harvest Right za izvoz iz ZDA) - Polno zapakiran liofilizator: 920 x 770 x 1500 mm (V) - Ob osebnem prevzemu lahko zaboj zmanjšamo, da se prilega v manjša dostavna vozila: 920 x 770 x 1050 mm + dodatna škatla z deli Vzdrževanje Filtriranje in menjava olja vzame le nekaj minut. Vakuumska črpalka Vsaka vakuumska črpalka je tovarniško testirana (25 mikronov ali boljše, 25.400 mikronov = 1 palec Hg), s preverjeno zmogljivostjo pretoka zraka. Tehnične specifikacije vakuumske črpalke - Olje: samo Harvest Right Oil, Robinair Premium High Vacuum Pump Oil ali JB Industries Black Gold Vacuum Pump Oil - Motor DC, energetsko učinkovito - Napetost: standardno, 230 V - Dimenzije: 414 x 152,4 x 307,3 mm - Teža: 14,5 kg - Glasnost: 52 dB Primerjava produktov Industrijska oljna črpalka vs. standardna oljna črpalka Menjave olja Nova industrijska črpalka olja skoraj ne potrebuje menjave ali filtracije zahvaljujoč funkciji odvajanja plinov. Olje ostane čisto tudi po 30 ali več ciklih. Redna menjava je potrebna šele po 25 do 40 ciklih, medtem ko pri standardni črpalki menjava in filtracija olja nastopita vsakih 4–5 ciklov (z novo 3/8" vakuumsko cevjo). Vakuumski tlak Industrijska črpalka doseže globlji vakuum od standardne – pri hladnih pogojih 0,05 Pa (industrijska) proti 0,08 Pa (standardna), pri visokih temperaturah pa je razlika še večja: 0,05 Pa (industrijska) proti 2,05 Pa (standardna). Zato je industrijska črpalka posebej primerna za zahtevne pogoje …

Stanje: rabljeno, Dieses Angebot bezieht sich auf eine Instron 2518-807 Zug-/Druckkraft-Lastzelle (Tension/Compression Static Load Cell). Das Gerät ist voll funktionsfähig und sofort einsatzbereit. Die Instron 2518-807 Zug-/Druckkraft-Lastzelle ist für hochpräzise Kraftmessungen in verschiedensten Prüfapplikationen konzipiert. Dank ihres robusten Designs eignet sie sich für genaue Prüfungen in Zug, Druck, zyklischer Beanspruchung sowie Wechselbelastungen und ist somit ein unverzichtbares Werkzeug im Bereich der Materialprüfung und Qualitätssicherung. Hauptmerkmale: Kapazität: Messbereich bis 100 N (22 lbf), somit für zahlreiche Prüfaufgaben geeignet. Außergewöhnlicher Messbereich: Präzise Kraftmessungen bis zu 1/500 der Nennkapazität möglich – für maximale Genauigkeit in sämtlichen Anwendungen. Automatische Erkennung: Mit elektronischer Seriennummer und elektrischer Kalibrierung für eine einfache, fehlerfreie Inbetriebnahme ohne manuellen Abgleich. Integrierter Überlastschutz: Lrodpfexxzndox Aacoh Überlastsicherung minimiert das Risiko von Beschädigungen bei Handhabung und Messung und erhöht so Langlebigkeit und Zuverlässigkeit. Tara-Gewicht: Tara-Möglichkeit bis zu 40% der Nennkraft – kompatibel mit verschiedenen Spannzeugen und Vorrichtungen für maximale Flexibilität. Normenkonformität: Vollständig konform mit internationalen Kraftmessnormen wie ASTM E4, ISO 7500-1 Klasse 0,5 sowie JIS B7721 und B7733, gewährleistet zuverlässige, präzise Messungen. Kompatibilität: Die Instron 2518-807-Lastzelle ist mit verschiedenen Instron-Prüfmaschinen inklusive der UT- und 3300-Serie kompatibel und damit vielseitig einsetzbar – ideal für: Materialprüfung: Optimal zur Bestimmung mechanischer Eigenschaften von Werkstoffen unter Zug- und Druckbeanspruchung. Qualitätssicherung: In industriellen Anwendungen zur Überwachung und Gewährleistung der Produktqualität und Einhaltung von Spezifikationen. Forschung & Entwicklung: Unentbehrliches Werkzeug für Wissenschaftler und Ingenieure zur Untersuchung des Materialverhaltens unter unterschiedlichen Lasten.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5668430QC5A, potovalna razdalja osi X: 10.000 mm, vrtilni moment: 4.000 Nm, TEHNIČNE PODROBNOSTI Pomik po X-osi: 10.000 mm Inercijski moment: 200 kg/m² Navor: 4.000 Nm Nagibni navor: 10.000 Nm Velikost vrtalne pritrdilne plošče: ca. 1.000 x 1.200 mm PODROBNOSTI O STROJU Moč (dovod varilne žice): 4 kW Moč (Cloos QIROX-C QRC350): 40 kVA Lrodpoxgqy Esfx Aacoh OPREMA 2 varilni obračalni mizi (levo/desno), tip: WPEK-25000N Obračalna naprava Varilni robot, proizvajalec: Cloos-Bauer, tip: BPF4001/2/4 Dovod varilne žice, proizvajalec: ESAP Odsesovalna enota Vodenje po tirnicah Ločene varilne enote, proizvajalec: Cloos, tip: GLC603 Quinto Samostojna krmilna enota Ohišje iz valovite pločevine z 2 drsnima vratoma

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Rated load: 2,500 kN Threshold value: Measurement starts at approx. 3% of rated load (approx. 75 kN) Resolution: 10 kN Measurement accuracy: +/-0.5% of full-scale reading (FS) Non-linearity: +/-0.3% FS Non-repeatability: +/-0.1% FS Temperature range: 0°C to 70°C Temperature influence On FS output: +/-0.001% FS/°C On zero-load output: No influence (automatic zero calibration) Overload capacity: 50% of rated load (3,750 kN) Measurement speed: Three measurements per second Lodpfx Asfpwmpoacerh Operating modes: Peak value or continuous measurement Strokes per minute: Single-stroke device, automatic zeroing after each stroke Power supply: Standard 9V block battery Approx. 30 hours of continuous operation Device features a battery replacement indicator Dimensions: Approx. 185mm (L) x 200mm (W), height approx. 127mm Height (exact): 5.0000 +/-0.0002" Weight: Approx. 13 kg including carrying case With analog output

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Rated load: 5,000 kN Threshold: Measurement starts at approx. 3% of the rated load (approx. 150 kN) Lrsdsfpwk Repfx Aacjh Resolution: 10 kN Measurement accuracy: +/-0.5% of full scale (FS) Non-linearity: +/-0.3% FS Non-repeatability: +/-0.1% FS Temperature range: 0°C to 70°C Temperature effects On FS output: +/-0.001% FS/°C On unloaded output: no influence (automatic zero adjustment) Overload: 50% of rated load (7,500 kN) Measurement speed: Three measurements per second Operating modes: Peak value or continuous measurement Strokes per minute: Single-stroke device, automatic zero reset with each stroke Power supply: Standard 9V block battery Approx. 30 hours continuous operation The unit features a battery change indicator Dimensions: approx. 230mm L x 190mm W, height approx. 180mm Height (exact): 7.0000 +/-0.0002" Weight: approx. 32 kg, including transport case With analog output

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Complete robotic welding cell with rotary table and enclosure Robot: KUKA KR 150 R2700 extra Payload: 150 kg Reach: 2,090 mm Equipped with welding gun (Dalex, new in 2018) including cooling system (closed-circuit water cooling) A complete second welding gun (manufacturer: ARO) is included in the scope of delivery Dedicated cooling unit integrated in the system Automatic rotary table with 10-position indexing (currently set up as 5-position for ongoing production) Workstation for loading and unloading parts is well-lit and secured with light barriers Lsdpfenr E Enox Aacerh System control via Siemens PLC, programmed by HS Automation Siemens operator panel for system operation mounted at the loading station on a swivel arm All components enclosed within a safety housing with security door. The installation can still be inspected under power.

Leto izdelave: 2006, Stanje: rabljeno, • Cutting height (mm): 200 Lrjdpfom E Uf Asx Aacoh • Cutting width (mm): 200

Stanje: dober (rabljeno), Nova BioProfile Flex Automated Cell Culture Analyzer The BioProfile is an automated cell culture analyzer that measures up to 15 key cell culture parameters. By combining up to five separate instruments into one user-friendly device, the BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to using multiple instruments. The FLEX automatic sampler withdraws samples from its two fermenters and transfers them to the FLEX analyzer’s measurement unit. Data received by the FLEX autosampler were compared with manually collected samples from the reactor and subjected to statistical analysis. Specifications Sample analysis time: 2.5 minutes (gases only – pO₂ + pCO₂), 4.0 minutes (chemistry/gas and osmolality), 6.25 minutes (all 15 tests) Operating temperature range: 15–30 °C (59–86 °F) Lrsdpfoq Tp Tdsx Aaceh Relative operating humidity range: 20–85 % Sample volume: 1 ml (for all modules) Sampling options: Individual via syringe/cup; automated batch with 20-position sample tray; online, automated from up to ten bioreactors Electrical requirements: 90–264 VAC, 50 to 60 Hz (universal power supply) System size: Height: 20 in (50 cm) Width: 26 in (66 cm) Depth: 20 in (50 cm) System weight: Analyzer: 94 lbs (42.6 kg) without reagents Selectable modular test menu options: - Chemistry/gases - Cell density/viability - Osmolality - IgG System integration options: - Online autosampler - Sample collection system - OPC connectivity Find more items—new and used—in our shop! International shipping costs on request!

Leto izdelave: 2020, Stanje: dober (rabljeno), Comav rotary valve dosing airlock rotary feeder drop-through airlock Rotor diameter: 400 mm Dimensions: see photos Manufacturer: Comav Type: VSD 400 Year of manufacture: 2020 All stainless steel Ledpfx Aajwyf Nwecjrh Venturi diameter: 100 mm Motor power: 0.75 kW See our other listings

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 64.000 h, številka stroja/vozila: 20306061, delovna širina: 3.110 mm, hod: 200 mm, globina grla: 415 mm, razdalja med stojali: 2.700 mm, stiskalna sila: 100 t, Amada Astro II 100 NT upogibna celica. Vključuje nakladalnega robota, upogibnega robota, premestitveno napravo z dodatno podporo, nakladalno mizo, transporter za razlaganje palet (trenutno odklopljen), zaščitno ograjo. Priloženi so različni prijemalci za nalaganje in upogibanje, tako kleščni kot vakuumski tip. Delovne liste je možno nalagati kot sklad ali z navpično nakladalno enoto. Upogibna sila: 980 kN Dolžina mize: 3110 mm Hod: 200 mm Odprtina: 500 mm Minimalna debelina pločevine: 0,6 mm Minimalne dimenzije pločevine: 150 x 150 mm Maksimalne dimenzije pločevine: 800 x 1000 mm / 300 x 1800 mm Maksimalna masa pločevine: 20 kg (vključno s prijemali za robota za upogibanje/nalaganje) Lrsdpfx Aaowakicecsh Servisirano s strani lokalnega zastopnika Amada.