Robotska celica ABB robot s čistim laserjem

ABB / Clean Laser IRB4600

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Giedpfx Agjd Ev Upjwjp Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Heidenhain TNC 620 V2 control Giodpfx Agov Rr Hxjwjp Travel X/Y/Z: 760/480/480 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK40 Table size: 900 x 410 mm Chip conveyor Automation / robot

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Gisdpfx Ajd Ixadogwsp Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10014777, skupna masa: 1.300 kg, nosilnost: 210 kg, doseg roke: 2.696 mm, We offer industrial robots from the manufacturer KUKA. The scope of supply includes the robot arm, control cabinet, and the corresponding cables. The robots originate from a fully operational system and have been professionally dismantled. We conduct a functional test and inspect the robots. If interested, we can demonstrate the robots’ functions to ensure they meet your requirements. Gijdpfoq Suwbex Agwep - Optional Upgrade for an Additional Charge - We are pleased to introduce a new feature for our robots: the Siemens S7-1200 Profisafe safety controller. This controller enables seamless integration of an emergency stop, safety door, and start/stop interface via the Profisafe bus. The controller is completely configured and programmed, allowing you to easily implement a stand-alone solution with a robot and safety fence. Additionally, we can support you with commissioning if required. A 14-day return policy applies for this option; further warranty services are excluded. We maintain an extensive stock of these robots, and the stated prices correspond to a package price. Discounts for larger order quantities are negotiable. Please feel free to contact us again to discuss further details. Sale exclusively to commercial customers.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, nosilnost: 210 kg, doseg roke: 2.696 mm, širina krmilne omare: 560 mm, višina krmilne omare: 1.060 mm, vrsta vhodnega toka: Enosmerni tok, teža obdelovanca (maks.): 1.111 kg, dolžina elektro omare: 800 mm, globina grla: 2.696 mm, Product description: 24 units in stock Industrial KUKA KR 210 R2700 Prime KR C4 Gsdpfeqv D Tpex Agwoip Manufacturer: KUKA Year of manufacture: 06/2014 Serial number: 635949 Type: KRC4 Payload: 210 kg Axes: 6 Reach: 2696 mm Repeatability: ± 0.06 mm Scope of delivery: - Robot - Control cabinet - Cables - Teach pendant Prices are net plus VAT Can be inspected under power at any time. The robot is in very good used condition. Delivery time: Immediate – subject to prior sale Upon delivery, you will receive an invoice showing VAT. Item condition "New" – may be without original packaging, minor storage marks possible, delivery as shown. Item condition "Used" – items show signs of use, these are therefore not described in further detail.

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. Gedpfx Aot Hw Shegweip 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Rated load: 5,000 kN Threshold: Measurement starts at approx. 3% of the rated load (approx. 150 kN) Resolution: 10 kN Measurement accuracy: +/-0.5% of full scale (FS) Non-linearity: +/-0.3% FS Non-repeatability: +/-0.1% FS Temperature range: 0°C to 70°C Temperature effects On FS output: +/-0.001% FS/°C On unloaded output: no influence (automatic zero adjustment) Gisdpfxofpwk Ro Agwsp Overload: 50% of rated load (7,500 kN) Measurement speed: Three measurements per second Operating modes: Peak value or continuous measurement Strokes per minute: Single-stroke device, automatic zero reset with each stroke Power supply: Standard 9V block battery Approx. 30 hours continuous operation The unit features a battery change indicator Dimensions: approx. 230mm L x 190mm W, height approx. 180mm Height (exact): 7.0000 +/-0.0002" Weight: approx. 32 kg, including transport case With analog output

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, Rešitev za paletiranje s kolaborativnim robotom (kobotom) - razbremeni zaposlene težkega dvigovanja in monotonega, fizičnega napora - sistem je mogoče s konfiguracijo prilagoditi individualnim potrebam Giodperbz Rxjfx Agwjp - zahteva manj prostora kot običajne rešitve za paletiranje (dimenzije 2.650 x 1.600 mm) - ni potrebna stacionarna varnostna tehnika, zato je UNIPAL enostavno in prilagodljivo uporaben - nadzorna plošča za pregled nad procesom - nosilnost do 22 kg in višina paletiranja do 2.200 mm - hitro in enostavno preurejanje - Plug-and-Play (potrebuje 230 V napajanje) in 6 barov stisnjenega zraka

Stanje: novo, Cutting Range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° right: 230 mm square 45° right: 220 x 220 mm flat 45° right: 230 x 150 mm Gsdpfjiqt Rlox Agwjip round 60° right: 140 mm square 60° right: 140 x 140 mm round 45° left: 200 mm square 45° left: 175 x 175 mm flat 45° left: 220 x 150 mm Cutting Speed: 40 / 80 m/min Saw Blade: 2925 x 27 x 0.9 mm Working Height: 975 mm Coolant Pump: 100 W Saw Motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double miter bandsaw with swiveling saw bow from left -45° to right +60° - Ideal for cutting pipes, profile material, and solid stock made of stainless steel, iron, etc., for industrial/commercial use - Generously sized cast saw arm for low-vibration operation - Two blade speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder - Quick-release vise for fast and easy clamping of the workpiece - Precise, adjustable blade guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of Delivery: - Bi-metal saw blade 2925 x 27 x 0.9 mm - Blade tension adjustable via pressure gauge - Carbide blade guides - Quick-release vise - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shutdown at end of cut - Base frame

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Gedpjd Hintjfx Agwsip Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300