Zamrznjenih Celic nakup rabljenega (153)

Stanje: zelo dobro (rabljeno), Here we offer a Feutron climate test chamber. Feutron climate test chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0...± 1.5 K/min - Rate of temperature change: - Heating: 2.0 K/min (average) - Cooling: 2.0 K/min (average) - Standard IEC 1646 is implementable including testing, solar modules up to a maximum weight of 160 kg, and non-linear ramps (setpoint jumps) Drying - Air drying: Condensation drying Humidity - Air humidification: Steam humidification - Humidity range: 10...95% RH - Temporal humidity deviation: ≤ ± 3.0...± 5.0% RH - Dew point range: 8...80.9°C Test Chamber - Test chamber volume: 7.0 m³ Dimensions - Test chamber internal dimensions (W x H x D): 1500 mm x 2250 mm x 2000 mm - Heated hinged door, DIN right, width: 900 mm x height: 2100 mm - Heated viewing window with blackout and lockable, width: 500 mm x height: 600 mm - Feedthrough openings: 2x on the right front side, Ø 75 mm - Irradiation unit inside test chamber - Cut-out: 4x in the left side wall for SC 2500, each 850 x 700 mm - Illuminated area with SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split condenser (for outdoor installation, winter mode) - Refrigerant: R507 / R23 Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Maximum radiation uptake: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Fgodpjklv H Ijfx Af Ssa Power Supply - Test Chamber - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: Hardwired - Maximum simultaneous power demand: approx. 32.0 kW - Circuit protection: 3 x 63, Char C (A) Power Supply - SolarConstant - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: — - Maximum simultaneous power demand: approx. 30.0 kW - Circuit protection: 3 x 63, Char C (A) External Dimensions (including machine room/control cabinet and SolarConstant 2500 cabinet): - Machine room / control cabinet: width 3440 mm x height 2580 mm x depth 2950 mm - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - Split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Total test chamber weight: approx. 2700 kg - Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer any further questions you may have by phone.

Stanje: dober (rabljeno), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Rate of temperature change: 1 K/min Humidity range: 10...approx. 95% rH Humidity tolerance: +/- 5.0% rH Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260mm x 3850mm x 2780mm Test chamber (W x D x H): approx. 2254mm x 2645mm x 2251mm Door opening (W x H): approx. 2251mm x 2254mm Fgedpfxjuvipwo Af Ssa Condition: Used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) If you have any further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), TIRA Model: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Fgodpfouviumjx Af Sea Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (See picture) (Technical data and specifications are subject to change and errors may occur!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Fsdpfx Afevb Hane Sega Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Fjdpfx Ajvb E Uqef Soga Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/11 – Water-Cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for carrying out temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber enables the functionality or material properties of a test specimen to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer to the test specimen. The air treatment system is located at the rear of the internal chamber. The equipment aggregates are located behind the unit in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is built into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test room can be flushed with fresh air via a blower. Technical Data: Temperature testing: Temperature range: –60 °C to +90 °C Temperature deviation: ±0.5 to 1 K over time Spatial temperature deviation: ±1 K at 200 mm wall clearance Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic testing: Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation: ±0.5 K over time Humidity deviation: ±2 – ±5 % RH over time Without radiant heat In stabilized condition The technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without test specimens, without radiation, and without additional equipment. Dimensions: Internal dimensions (test room / usable space): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Width: 2,100 mm Depth: 2,530 mm Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm Depth: 5,200 mm Height: 2,520 mm (may vary based on doors, frame, accessories, etc.) Operating data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Fsdpfx Afsx Anipo Soga Weight: 6,000 kg Notes: Inspection by appointment possible (46325 Borken) Shipping by freight carrier possible – costs & organization on request Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: rabljeno, Leto izdelave: 2017, Robotska celica ABB z laserjem Clean Laser Proizvajalec: ABB / Clean Laser Tip: IRB4600 Leto izdelave: 2017 Sistem je sestavljen iz: Fedpowrcn Uefx Af Sjga Robot ABB IRB4600 Krmilna omara Ročna upravljalna naprava Naprava za lasersko čiščenje Clean Laser tip intelliScan30 Odvijalna naprava TEKA 18326ä

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: nepreverjeno, številka stroja/vozila: 2735636, skupna višina: 2.300 mm, skupna širina: 2.230 mm, skupna dolžina: 4.000 mm, skupna masa: 3.500 kg, Oprema: kabina, REIS Robotics Welding Robot Cell SRV6-C (Year of Manufacture: 2003) Complete system consisting of robot, positioner and power source Robot – Reis SRV6-C Type: SRV6-C Manufacturer: Reis Robotics Year of manufacture: 2003 Robot weight: 200 kg ID no.: 2735636 Com. no.: 52 1050 Axes: 6 Typical application: MIG/MAG welding Positioner – Reis RND01 (Rotary Table) Type: RND01 Manufacturer: Reis Robotics Year of manufacture: 2003 Com. no.: 52 1050 Machine weight: 300 kg Function: Single-axis rotary table / welding positioner Application: Mounting and rotational positioning of the welding fixture Control: Coupled with robot controller Control & Switch Cabinet of the Cell Type: SRV6-C Manufacturer: Reis GmbH & Co Maschinen-Fabrik Year of manufacture: 2003 Electrical connection: Voltage: 3~ 220/400 V Frequency: 50 Hz Connected load: 3 kVA Fuse protection: max. 5 A Pneumatics: Pmin: 5 bar Pmax: according to nameplate not used (no hydraulics present) Cabinet weight: 125 kg Welding Power Source – Fronius TransPuls Synergic 4000 (TPS 4000) Manufacturer: Fronius Model: TransPuls Synergic 4000 (TPS 4000) Process: MIG/MAG / Pulsed / Synergy programs Fsdpfx Afoyubygo Sjga Compatible with Reis robot controllers Accessories: Torch package Hose package Cooling water circuit (external reservoir visible) Dimensions: 4.0 × 2.23 × 2.3 m (robot welding cell, closed design) Operating hours counter: 29,593 h

Leto izdelave: 2013, stanje: rabljeno, Število strojev: 4 kosi Fgedpfx Afjyr Skkj Soa Krmiljenje: Siemens Menjalnik orodij: 1 pozicija Sistem je sestavljen iz 4 strojev: Soraluce FR 9000I Soraluce RR 9000II Soraluce FP 8000 Soraluce PM 6000 mesta za pripravo obdelovancev nadomestne palete avtomatski sistem za dovajanje orodij WBG avtomatski paletni sistem regal za shranjevanje palet Tehnični podatki so podatki proizvajalca oziroma uporabnika in zato nezavezujoči za nas. Pridržujemo si pravico do vmesne prodaje; veljajo izključno naši splošni pogoji poslovanja in prodaje. O nas: več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščne površine, nosilnost žerjava 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaš obrat, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch.

Stanje: rabljeno, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Fjdowypqlopfx Af Soga Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right and left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table area with one working station, without central partition: approx. 2000 x 950 mm - Table fixture change plate size for welding jig mounting: 300 x 600 mm - Connection cable robot to control cabinet: 5000 mm - Freestanding control cabinet with teach-in operating panel (weight approx. 300 kg) - Control cabinet ENCM-RP692 - Operator control YZNC-OP186 - Teach panel, JZNC-T834B - Robot YRFL-NNA06WB - Automation by ECKHARDT type ROBO Robot payload: 6 kg Net weight robot only: 180 kg The complete system is designed as a compact welding cell. Robot control cabinet installed adjacent to the cell. The robot can, of course, also be equipped with a MIG-MAG welding source. Space requirement welding cell with robot (L x W x H): 2000 x 2000 x 2300 mm Weight welding cell with robot: 1055 kg Space requirement control cabinet (L x W x H): 1000 x 850 x 1600 mm Weight control cabinet: 300 kg Total installation footprint (L x W): approx. 3000 x 3000 mm Total weight of the complete system: approx. 1355 kg Good condition Space required for transport (L x W x H): 3000 x 2200 x 2300 mm

Stanje: zelo dobro (rabljeno), Spoštovani, ponujamo vam rabljeno proizvodno celico v zelo dobrem stanju. Komplet sestavljajo štiri stroji: – Traub TNL 26 Fgedpfx Asyrypzsf Ssa – Gildemeister GD 32 – Star SV-20 – Star SR-32 z ustrezno dokumentacijo, odsesovalnimi napravami in dodatno opremo. Za ponudbo nas prosim kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Naprodaj sta 2 nova elektrostatična filtrirna vložka ter 1 rabljena znamke Bristol za tip B 500 EF. Filtrirna površina: 3 m^3 Razmak med ploščami: 6 mm Teža celice: 5 kg Po želji je mogoče organizirati prevoz in nakladanje po vsej Evropi za doplačilo. Cene so brez DDV. Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Odkup/prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV, ORODJARSKIH STROJEV IN OSTALO. Potrebujete kakovosten, a cenovno ugoden stroj za vašo proizvodnjo? Ali želite svojega prodati? Fedeydla Nepfx Af Sjga Za dodatne informacije ali možnosti kontakta nas dosežete preko kontaktnega obrazca.

Stanje: pripravljen za uporabo (rabljen), Maks. nosilnost robota: 3 kg, doseg robota: cca 600 mm, ročno rokovanje z deli. Dozirni sistem za 1K in 2K material, vključno z aplikacijami za zapolnjevanje rež in zalivanje, dovod materiala: iz kartuš, hobbockov in 200-litrajskih posod, dozirno krmiljenje Beckhoff, obdelava materiala: kartuše, hobbocki, 200-litrajske posode, krmiljenje: robotsko programiranje Fruitcore s 3D-prikazom gibanja robota v realnem času in dozirnim krmiljenjem Beckhoff, s statičnim 1K in 2K dozirnim sistemom. Ogled na lokaciji je možen, ni priključeno na elektriko. Fsdpjylzhxefx Af Ssga

Stanje: pripravljen za uporabo (rabljen), Na voljo so štiri enake dozirne celice, tri naprave so nove in neuporabljene, ena pa je rabljena. Dozirna zmogljivost: 0,02–0,5 cm³/s pri mešalnem razmerju 1:1, mešalno razmerje: do 1:100, volumen odmerka: 0,005–5 cm³, dovod materiala: 20-oz kartuše (600 ml). Doziranje majhnih količin od 5 mg/dozirno točko, obdelava zelo abrazivnih 2K-materialov. Proces: doziranje, mešanje, tesnjenje, lepljenje, ulivanje, zaščita, programabilno za točkovno in linijsko doziranje, namenjeno za obdelavo abrazivnih dvokomponentnih materialov, z nadzorom šobe. Ogled na lokaciji je možen. Fgedpfsylzhrjx Af Sea

Stanje: pripravljen za uporabo (rabljen), Na voljo so trije enaki osnovni moduli večnamenske dozirne celice Rampf MC-EASY. Največja nosilnost robota: 3 kg, doseg robota: približno 600 mm, ročno rokovanje z deli. Dozirni sistem za 1K- in 2K-material, med drugim za gap filler- in zalivne aplikacije, dovod materiala iz kartuš, hobokov in 200-l sodov, dozirno krmiljenje Beckhoff, obdelava materiala: kartuše, hoboki, 200 l posode, krmiljenje: robotsko programiranje Fruitcore s 3D prikazom gibanja robota v realnem času, s statičnim 1K- in 2K-doziranjem. Z avtomatizacijskim modulom Digital Robot HORST600 ter centralno upravljalno programsko opremo za vse udeležence procesa, s 3 stranskimi stenami in 1 vrati, udobnim ročajem, cilindričnim zaklepom, osnovno ploščo za robota in potrošni material, upravljalna konzola, svetlobna pregrada, sistemska svetilka – vse je posamezno pozicionirano, montirano in ožičeno, stekla iz Makrolona. Možen je ogled na lokaciji, naprava ni priključena na elektriko. Fsdpfxoylzicj Af Sega

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost: 10 kg, doseg roke: 1.418 mm, proizvajalec krmilnikov: FANUC, model krmilnika: R-30iB Plus, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 0,05 mm, trajanje garancije: 6 meseci, Oprema: dokumentacija / priročnik, Mobilna avtomatizacijska celica GEWA "RoboFlex 10", sestavljena iz: - FANUC CRX10iA - Krmilnik R-30iB Plus Fgjdpfx Ajxrknmsf Soa - Tablični Teach Pendant - Osnovno ogrodje z vključenimi 5 rastri - Brez prijemala (opcijsko na voljo) Celica je pri nas v Eiflu in si jo je mogoče ogledati pod napetostjo. Predhodni dogovor o ogledu je nujen. OPCIJSKO: Povezava RoboFlex z vašo obdelovalno napravo - Konfiguracija avtomatizacijskega vmesnika - Namestitev in zagon - Uvajanje operaterja (2h) - Preizkus delovanja in predaja stranki Pripravimo vam lahko individualno ponudbo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, A cell with an ABB robot IRB 340 M2004 Type B – 34-51225 One of the fastest pick-and-place robots of the decade Delta robot for high-speed feeding, detail detection, and stacking Quantity: 10 units Year of manufacture: 2008 Controller: ABB M2004 Number of axes: 4 Payload capacity: 1 kg Robot weight: 140 kg Work envelope: Diameter – 1130 mm Height – 250 mm Rotation – unlimited Fgsdpferbh Uxex Af Sja The cell is equipped with two belt conveyors, each with a length of 65 cm and a width of 100 cm PRICE for a complete robot: €6,400/unit PRICE for a robot within a cell: €7,100/unit (includes vision system and software)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 2014 Load capacity: 20 kg Reach: 1,726 mm Fjdpfxjr Aka Ao Af Ssga

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, nosilnost: 5 kg, doseg roke: 704 mm, Fanuc LR Mate 200 iC Robot (E-29388) with Cell Vision System Country of origin: Japan Year: 2007 Fsdpfx Aeqgck Dof Ssga Control unit: R-30iA MATE Number of axes: 6 Payload capacity: 5 kg Reach: 704 mm Repeatability: ±0.02 mm Robot weight: 27 kg Camera: Sony XC-56

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, nosilnost: 1 kg, Cell ABB IRB 340 M2004 Type B Robot – 34-51225 Country of manufacture: Sweden Year of manufacture: 2008 Controller: ABB M2004 Number of axes: 4 Payload: 1 kg Robot weight: 140 kg Working envelope: Diameter – 1130 mm Height – 250 mm Rotation – unlimited Fgedpoqffhhsfx Af Soa Cell dimensions: Length – 150 cm Width – 145 cm Height – 240 cm The cell is equipped with two belt conveyors, each with a length of 65 cm and a width of 100 cm.

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Robot cell for leak testing consisting of: Fgodpfjn D D E Tjx Af Soa FANUC LR Mate 200iC/5L robot – year 2008, measurement table equipped with 8 light curtains, 2 Innomatec devices for leak testing, type LTC-502. The cell is equipped with a safety system and CE certification.

Stanje: rabljeno, Leto izdelave: 2023, 2023 Cloos robotska varilna celica z robotom QRC-300 in varilnim izvorom Qineo Next 452 Premium MIG/MAG – opremljena z varnostnimi svetlobnimi zavesami Leuze Electronic MLS, čistilnikom gorilnika in ročnim upravljalnikom. Dvojna rotacijska prenosna miza, dimenzije 650 x 450 mm. Cloos QRC-300 robot – obračalni razpon: os 1: -170°/+170°, os 2: -90°/+125°, os 3: -220°/+70°, os 4: -170°/+170°, os 5: -135°/-135°, os 6: -300°/+300°. Hitrost obračanja: os 1: 200°/s, os 2: 200°/s, os 3: 230°/s, os 4: 490°/s, os 5: 540°/s, os 6: 520°/s. Delovno območje Ø3.000 mm. Doseg 2.000 mm. Nosilnost 8 kg. Ponovljivost ±0,1 mm. Tloris 400 x 400 mm. Teža 110 kg. Serijska številka 0881590000-20040 (2023). Qineo Next 452 Premium – varilni tok 25 A/15 V–450 A/36,5 V. Varilni tok pri 60 % delovnem ciklu 450 A/36,5 V. Varilni tok pri 100 % delovnem ciklu 350 A/31,5 V. Napetost v prostem teku 80 V. Omrežna napetost 380–480 V / 3 faze. Priključni kabel 4 x 6 mm². Počasna varovalka 32 A. Zaščitni razred IP. Razred izolacije F. Hlajenje F. Dimenzije (D x Š x V): 720 x 340 x 500 mm. Teža napajalne enote 63 kg. Teža hladilnega modula 28 kg. Serijska številka Qinx 1963 (2023). Enote za podajanje žice QINEO NexT – hitrost podajanja 30 m/min, žica Ø0,8–2 mm. Skupne dimenzije (Š x G x V): 350 x 270 x 230 mm. Teža 10,2 kg. Fgedpfx Afoyx Hzxe Ssa

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), A welding cell including robot and welding equipment is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5,250h, operating hours: 1,244h. 1) Robot: Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, maximum reach: 1,373mm, repeatability: +/-0.08mm, weight: approx. 238kg. 2) Welding machine: Fronius Magic Wave 4000, year of manufacture: 2006. An on-site inspection is possible. Fsdpfx Asviv Dlsf Ssga

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), A complete SIC-Marking laser processing and marking system is available. Stations: 3, table type: vacuum clamping table, processing area per station X/Y: 1000mm/1600mm, laser wavelength: 10600nm/1064nm, processes: vaporization/cleaning/structuring/surface treatment, overall system dimensions X/Y/Z: approx. 25000mm/3000mm/3000mm, operating hours: approx. 2000h. Station 1: Laser type: Synrad CO2 laser, number of lasers: 6, laser power: 100W, pulse frequency range: 0kHz–100kHz, power density: 250kW/cm², processed materials: polyamide/PVB/PET, processes: melting/vaporization. Station 2: Laser type: IPG fiber laser, number of lasers: 6, laser power: 250W, pulse frequency range: 20kHz–500kHz, power density: 250MW/cm², processed materials: copper/aluminum/tin/lead/iron, processes: structuring/melting/vaporization. Station 3: Laser type: IPG fiber laser, number of lasers: 3, laser power: 300W, pulse frequency range: 2kHz–200kHz, power density: 3MW/cm², processed materials: copper/aluminum/tin/lead/iron, processes: surface treatment. Fodpfx Afoyfv I He Sega The coating of the F-Theta lenses at Station 2 is slightly deformed. Documentation available. On-site inspection possible.

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), Na voljo je brusilna celica (brusilna kabina) SHL z robotom ABB in dvema brusilnima agregatoma. 1) 2x SHL DKS 250/450+DPE-G, letnik izdelave: 2012, premer kontaktnega kolesa: 250 mm–450 mm, hitrost vretena: 3500 obr/min, premer vretena: 35 mm, dolžina brusnega traku: 3500 mm, maks. širina traku: 100 mm, dimenzije stroja X/Y/Z: pribl. 1200 mm/900 mm/1900 mm, teža: pribl. 700 kg. 2) ABB robot. 3) Brusilni agregat SHL P550. 4) Paletni transporter. 5) Postaja za prestavljanje. 6) Brusilna kabina z električno omaro, skupne dimenzije sistema X/Y: pribl. 5500 mm/4900 mm. Vključene so krmilja, licenčni ključi, držala in orodja. Sistem je mogoče prevzeti, kot je viden, demontaža ni potrebna. Dokumentacija je na voljo. Ogled na kraju samem je možen. Fsdpexdm Uaefx Af Sjga