Za Gradnjo Sušilnic Žita nakup rabljenega (118.183)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, Farmet ekstruder za sojo/oljno ogrščico pred končno stiskanjem. Uporabljan le kratek čas. Motor 55 kW, zmogljivost 500–750 kg/h, odvisno od materiala. Na voljo z nekaj rezervnimi deli. Golhev Ub Utecdwxskd

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), This is a complete plant for house construction. Prices are listed with each item. Comprised of the following individual components (see attached document as well): Pictures to follow, already included in the attached document. Table 1 (Inserting and clamping the frame structure) €34,500 - Height-adjustable longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross-clamping - Connections for compressed air and electricity Table 2 (Placing and securing the first sheathing) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross-clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 - (Parking station for multifunction bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Placing and securing second sheathing and flipping the element to the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross-clamping - Connections for compressed air and electricity - Hydraulic turning unit Table 4 (Installation of electrical systems and insulation) €34,500 - Lateral transfer with rollers and sheathing - Lateral table displacement system - Connections for compressed air and electricity - Hydraulic turning unit Table 5 (Placing first sheathing and securing the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Lateral transfer with rollers - Pneumatic cross-clamping - Connections for compressed air and electricity Gslheu D Amgjcdwxskd Intermediate conveyor 3 m long €4,600 - (Parking station for multifunction bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Placing and securing the second sheathing) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross-clamping - Connections for compressed air and electricity Table 7 (Assembly and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic swiveling unit - Lateral table traverse unit - Overhead guide for holding walls vertically Manual area gantry with vacuum lifter on Table 2 €13,800 - (For placing first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-resistance rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 3 €13,800 - (For placing second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-resistance rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 5 €13,800 - (For placing first layer of sheathing on second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-resistance rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 6 €13,800 - (For placing second layer of sheathing on second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-resistance rails - Travel path 12 x 5 m Wall rack 1: 12 m long x 24 lanes €11,500 Wall rack 2: 12 m long x 20 lanes 2 Butterfly turning tables €25,300 - Manufacturer: Burmek? Vacuum lifter with pillar-mounted slewing crane €9,200 - Manufacturer: Schmalz Master carpenter's table €23,000 - Manufacturer: WEINMANN, year of manufacture 2011 - 10 m long with hydraulic swiveling unit and cross-clamping Receiving table €12,075 - Manufacturer unknown - 10 m long with hydraulic swiveling unit 1 spreader beam 2t Abus €20,125 1 spreader b

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, New and Unused Gelhcdwew H Ad Esxekd Adjustable Hydraulic Pump Manufacturer: Herrenknecht Type: AL A4VS0 250 LR2DY / 30R-V2B250U34 Pressure: 270 bar Power: 132 kW

Stanje: rabljeno, Starejša, delujoča mlinska kamnita mlin / drobilnik za krmo. Elektrika: 380 VOLT Moč motorja: 11 kW Gelhcdjxb Nxcjwxjkd Lastna teža mlina: cca 500 kg Ogled in nakladanje mlina je možno po predhodnem dogovoru! Pošiljanje s špediterjem je prav tako možno! Video mlina lahko na zahtevo pošljem na telefonsko številko prek WhatsAppa!

Leto izdelave: 2021, obratovalne ure: 180 h, Stanje: rabljeno, Lastna teža: 5.025 kg Gkolhcdoxvq Egowxed

Stanje: dober (rabljeno), Leto izdelave: 2021, Offer 23053 Technical Data: - Load capacity per roller block: 2,000 kg Gkelerl Iynohcdwxod - Roller dimensions: Ø 60 x 100 mm - 8 support rollers - Hydraulic lifting device stroke: 50 mm - Lifting device must be operated by a separate hydraulic power unit; hydraulic power unit and connecting hoses are not included - Space requirement: approx. W 800 x H 350 x D 600 mm - Weight (each): approx. 180 kg

Leto izdelave: 2016, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Farmet FE500 ekstruder za sojo, druge oljnice, žita, hrano za hišne ljubljenčke itd., v dobrem stanju, kompletno z nadzorno omaro. Motor 55 kW Gkslhcdjxfc Uxjwxsd Kapaciteta 500-750 kg/h

Stanje: pripravljen za uporabo (rabljen), Obratovalnica za obdelavo in sortiranje hlodovine, z 2D-merilnim sistemom KESAT, verižno žago in nakladalcem LogLift F 165 Z. Vhodni verižni transporterji, valjčni transporterji okrog verižne žage, sortirni verižni transporter. Hidravlično gnani potisniki in dolžinski omejevalniki. Približne dimenzije 20 x 70 m. Gslhcdwow U Axwjxekd Okvir za merjenje hlodovine Mesick 92S Krmilni in evalvacijski računalnik, operacijski sistem Win11 Izhod podatkov v .csv formatu Proizvajalec in dobavitelj KESAT, a.s. Datum namestitve 03/2024 LOGLIFT F 165Z - vsi hidravlični cilindri obnovljeni.

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: nepreverjeno, številka stroja/vozila: 2031306, vrsta vhodnega toka: trifazni, skupna masa: 9.200 kg, Valjčni stroj znamke Bühler iz proizvodnje koruznih kosmičev. Vgrajena sta detektor kovin in vibracijski kanal. Krmilna omara je priložena. Teža valjčnega stroja približno 9.200 kg. Golhcdwoxgq Rkoxekd

Stanje: zelo dobro (rabljeno), 753 USED Koenig Grain Spreader. The machine is operational and has been serviced. EXTERNAL DIMENSIONS (in cm): - width: 70 - length: 312 - height: 144 The equipment can be inspected at our warehouse (36-068 Bachórz, Poland). Available paid options: transport / installation / commissioning of the machine. The price quoted is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN. Gelhsr Eluwscdwxokd

Leto izdelave: 2007, Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 282395-6570 002, No reserve price – guaranteed sale to the highest bidder! Gksleu U Hf Ejhcdwxed Fully automatic cutting and processing of aluminium profiles in continuous operation for construction elements, façades, furniture, and industrial applications. The machine was overhauled in 2022 – feed transport plastics were renewed, Schüco service performed and adjusted, new circular saw blade purchased, and more. TECHNICAL DETAILS Processing length: max. 7,500 mm Profile cross section: max. 160 x 270 mm (height) Working height (infeed magazine/machine): 950 / 1,120 mm Pneumatic operating pressure: 6 ± 1.5 bar X-axis travel: 246 mm Y-axis travel: 250 mm Speed: max. 170 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm B-axis rotation angle: max. ± 45° Saw motor power: 3 kW Saw blade speed: max. 3,000 rpm Tools Saw blade diameter: 550 mm Condition: new in 2022 MACHINE DETAILS Nominal voltage/frequency: 400 V / 50 Hz Number of phases/neutral/conductor: 3 NPE Nominal current draw: 35 A Machine weight: 1,700 kg Note: The machine discharge chute has been shortened but can be extended again.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Proizvodna linija / miza za stenske in strešne panele / elemente. Od nove skoraj ni bila uporabljena. Še vedno je kot nova in deluje brezhibno. 1 kos Randek BS10u z nagibom 80 stopinj in 2 kosa miz BS05. Pnevmatska pritrditev / primež ter pnevmatsko dvižni valji za lažje premikanje stene. Dolžina: 9 m vsak Gslhcdexq Rrcswxjkd Dimenzije stene: od 225x900 cm do 365x900 cm Nakupna cena leta 2022: 850.000 SEK = približno 80.000 EUR Cena je brez DDV.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 2200 kg Total power requirement: 44 kW Chalet Construction Machine HOMEMAX - Max. workpiece height: 245 mm - Min. workpiece height: 50 mm - Max. workpiece width: 250 mm - Min. workpiece width: 50 mm - Working height: 900 mm Sawing unit: - Motor: 7.5 kW - Speed: 2900 rpm - Cutting height: 145 mm (170), (245) - Extraction port - Saw blade Ø 400 mm (450), (600), (750) Horizontal/Vertical milling unit: - 2 vertical spindles: 2 x 7.5 kW - 2 horizontal spindles: 2 x 7.5 kW - Spindle Ø 40 mm - Spindle speed: 2850 rpm - Max. tool Ø 180, 230, 270 (330) mm - Swiveling protection hood - Extraction port Ø 200 mm Drilling unit: - Motor: 1.8 kW - Speed: 1450 rpm - Drill bit Ø 12 - 35 mm - Drill bit length: 220 - 320 mm - Extraction port Ø 150 mm End-groove milling unit: - Motor: 4.0 kW - Spindle speed: 2900 rpm - Max. tool Ø 230 mm - Spindle Ø 30 mm - Extraction port Ø 150 mm Gkelhcdwevz E Tgsxod Included: - 6 m infeed roller conveyor with 7 pneumatic stoppers and rollers - 6 m outfeed roller conveyor - Tool set - Weight: 2200 kg

Stanje: rabljeno, Rundholzförderer mit Hubvorrichtung und Holzscanner Rema Control - für Stämme bis 6 m Länge - Abstand zwischen den Schienen: 1100/1050/1050/1250 mm - Rundholzfördererlänge: 10 m - Rema Scanner - Rundholz-Einlaufband Gjleu Smq Sshcdwxokd

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 194S, Quadro Comil 194S No.: 194-0743 Gkelhcoudynredwxed Machine: Material: Stainless steel Motor: 4 kW Rotor dimensions: 195x105 mm Sieve dimensions: diameter 200x120 mm Inlet: Ø 150 mm Outlet: Ø 250 mm Motor: 4 kW, 400 Volt

Stanje: rabljeno, Window rubber, cutting machine, gasket cutter -Stops: 2 Gkslhsb A Ncgjcdwxed -Dimensions: 2500/600/H1000 mm -Weight: 15 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Hidravlična lestev za okrogle hlode, primerna za premer hlodov od 7 cm do 66 cm. Gkslhcsv N Eiqedwxod

Stanje: rabljeno, New: Yes Color: Silver Usable Material: Bitumen Empty Weight: 9,500 kg Cargo Space Volume: 50,000 l BITUMEN TANKER (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE practices and the Highway Commission regulations. • The tank must be equipped with a thermal oil heating system. • Seamless serpentine pipework for heating • Bitumen temperature adjustable up to mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filling opening, ventilation system, inspection hatch, and drain. • The tank must be supported by support legs underneath, insulated with 50 mm rock wool, and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR Gkslhcdwsw Hzkwoxjd • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l filling tank. • The generator must be horizontal, equipped with a seamless, double-walled steel thermal oil pipe, and have a circulation body. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheet. • The generator system must be manufactured according to production standards and must include: an expansion tank, degasser, oil filter, valves, fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The heating coil must be made of at least 30 m2 of seamless steel pipe. • The generator must be equipped with an integrated warning system to protect the entire system in case of hazardous hot oil level or low heat transfer oil level. • The burner system must be designed to activate automatically according to the set operating temperature of the heat transfer oil. • The system must be manufactured as a complete package.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Proplanské zařízení na otáčení klád, podávací a výstupní dopravníky, hydraulický jeřáb pro korekci klád, robustní konstrukce. Zařízení z roku 2019. Gkelsu N Ac Sshcdwxed

Stanje: novo, Leto izdelave: 2025, Lesno podnožje za proizvodnjo drv Dolžina: 4–10 m Golhcdevrchiewxokd Širina: 1,5–3 m 2, 3 ali 4 verižni transportni trakovi Križni valji sinhronizirani s cepilcem drv Nastavljiva višina Pogonski sistem hidravličen ali električni

Stanje: rabljeno, Trench strut, trench brace, trench support, construction prop, shoring strut - Quantity: 8 struts available - Price: per piece - Trench strut: suitable for trench shoring systems - Length: 1.40–1.65 m - Tube diameter: Ø 42 mm Gkelhsct Aarecdwxod - Bearing plate: 70 x 70 mm - Weight: 6 kg per piece

Stanje: rabljeno, New: Yes Color: Silver Usable Material: Bitumen Empty Weight: 9,500 kg Cargo Space Volume: 50,000 l BITUMEN TANKER (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE practices and the Highway Commission regulations. • The tank must be equipped with a thermal oil heating system. • Seamless serpentine pipework for heating • Bitumen temperature adjustable up to mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filling opening, ventilation system, inspection hatch, and drain. • The tank must be supported by support legs underneath, insulated with 50 mm rock wool, and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l filling tank. • The generator must be horizontal, equipped with a seamless, double-walled steel thermal oil pipe, and have a circulation body. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheet. Gkjlhsw Hzfnjcdwxjd • The generator system must be manufactured according to production standards and must include: an expansion tank, degasser, oil filter, valves, fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The heating coil must be made of at least 30 m2 of seamless steel pipe. • The generator must be equipped with an integrated warning system to protect the entire system in case of hazardous hot oil level or low heat transfer oil level. • The burner system must be designed to activate automatically according to the set operating temperature of the heat transfer oil. • The system must be manufactured as a complete package.

Stanje: novo, Leto izdelave: 2024, Padeves trepe (stepfeeder) baļķu padevei un atdalīšanai. Augstums no 1,0 m, platums no 1,8 līdz 6 m. Piemērots materiāla diametram no 5 līdz 20 cm. Ātrums līdz 20 gab./min. Hidrauliska piedziņa. Automātiska padeves vadība. Golhcdwsudzycjxekd

Stanje: rabljeno, New: Yes Usable Material: Bitumen Unladen Weight: 16,000 kg Fully Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 unit 2. FOAM TANK (5 m3) 1 unit 3. BITUMEN FEED PUMP 1 unit 4. FOAM LYE SYSTEM 1 unit 5. PIPEWORK AND EQUIPMENT 1 unit 6. CONTROL PANEL 1 unit 7. CHASSIS 1 unit FOAM TANK (1 unit) Frame: - Box section profile - Capacity: 5 m3 - The tank body is made of 3 mm stainless steel plate, AISI 304 - Welds made using appropriate stainless-steel TIG welding b) Heating - 2" stainless steel tubing - Oil inlet and outlet pipes are 1" DN50, PN16, DIN 2633 - Leak test performed at 6 bar pressure c) Mixing System - 3 kW, 60 rpm mixing motor - Driven by chain sprockets - Tightness ensured at seals - Bearings are SKF or FAG - Fixed paddles are mounted on the outer walls to enhance dispersion and provide a homogenous mixture d) Temperature indicators are both digital and analog; two outputs are provided - Bitumen pump capacity max. 8 m3/h - Coupled to a 7.5 kW, 400 rpm gearmotor - Bitumen flow meter rated for up to 10 m3/h a) Pipes - Steel pipes per DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - Mill line built as 1.5" inner pipe and 2" outer jacket pipe - Jacket pipes welded according to TSE standards - Bridging pipes made in 0.5" at suitable positions b) Expansion Joints - DN 50, DN 80, PN 16, 200°C c) 3-way and 2-way valves with heating - Conform to TSE standards - Designed for high pressure (16 bar) and temperature (230°C) operation Gjlhcew Hzfzsdwxokd d) Hot Oil Valves - Hot oil valve by KLINGER or THERMO, heat resistant - Sizes: DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Made with 3 mm wire internal container, designed for frequent and easy cleaning The panel is assembled in accordance with IC standards.

Stanje: rabljeno, New: Yes Processable Material: Bitumen Unladen Weight: 18,000 kg Fully Automatic Polymer Modification Plant TECHNICAL SPECIFICATIONS Grinding and homogenizing of polymer (SBS, APP, KRATON, etc.) and bitumen. Feed: Bitumen-polymer premix Throughput: max. 15 t/h Density: 1.1 g/cm³ Viscosity: max. 20,000 mPa s (cP) Temperature: 190°C Solid Matter: Machine inlet: max. 3-6 mm Machine outlet: max. 0.2 mm MOTOR 130 kW Speed 3,000 rpm Voltage 400 V, 50 Hz, 3-phase Start method Y/Δ 2. VERTICAL MIXING TANK a) Frame - Manufactured as a vertical rectangular profile. - Built to dimensions with a volume of 11 m³. - The body is made of 5 mm St37-grade steel plate. - Bitumen inlet pipe: 3" DN80, PN16, DIN2633, 1 unit; Outlet pipe: 3" DN150, PN16, DIN2633 and 3" DN80, PN16, DIN 2633, 2 units. - Service access cover: 500 x 500 mm. b) Heating - Externally heated with a diathermic hot oil system. - Leak tightness test conducted at minimum 6 bar. c) Insulation - 100 mm rock wool with wire mesh, according to TSE (Turkish Standards Institute). - Outer surface made of stainless steel sheet, cut to fit tank dimensions. d) Mixing System - 2 x 7.5 kW mixing motors, 60 rpm - Driven by chain sprockets - Leak tightness maintained at shaft seals. - Bearings are SKF or FAG. - Fixed paddles mounted on the outer walls to enhance dispersion and provide a homogeneous structure. e) Heat indicators are both digital and analog with two outputs. f) Integrated connection paddles, ladders, and platform included. 3. BITUMEN PUMPS - 2½ XLA type with oil heating. - Pump capacity: 25 t/h bitumen pumping. - Driven by 7.5 kW, 400 rpm geared motor. 4. SBS FEED UNIT (POLYMER MODIFIED GRANULE) a) Feed Hopper - Feed hopper opening: 500 x 500 mm. - Made of 4 mm steel plate. - Granulate feed helix with a capacity of 30 m³/h fitted. - Frame wall thickness: 5 mm, pipe diameter: 220 mm. - Leak tightness assured at shaft seals. - SKF or FAG bearings used. - 5.5 kW, 80 rpm geared motor with coupling drive. 5. PIPEWORK AND ACCESSORIES a) Pipes - Steel pipes per DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25). - Mill line manufactured with a 3-inch inner pipe and 4-inch outer jacket pipe. - Jacket pipes welded according to TSE standards. - Bridging pipes installed at relevant junctions, 1 inch. b) Expansion joints - DN50, DN80, PN16, 400°C. Gkslhsw Hza Socdwxod c) 3-way and 2-way heated valves - Conform to TSE standards. - Pneumatic control fitted. - Designed for high-pressure (16 bar) and high-temperature (230°C) operation. d) Hot oil valves - KLINGER or THERMO branded piston-type hot oil valves. - DN25 PN16, DN65 PN16, DN50 PN16...