Stroji za gradnjo hlodov

unknown ML-35

Stanje: pripravljen za uporabo (rabljen), Linija za predelavo desk s sledečimi stroji: Ena dvorezna robilna žaga Fodpfx Ahogwqk Sjmoph Ena enorezna vodoravna prerazžagalna žaga (horizontalni tračni razrez) Transportni trakovi med stroji so vključeni.

Stanje: dober (rabljeno), Leto izdelave: 1980, maks. velikost palete 120 x 165 cm Fpsdjxpi N Ropfx Ahmeh 20 vodil za žeblje leto izdelave 1980, še vedno v dobrem stanju

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Log feed, chain log infeed and chain log conveyor line – 20 m Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – crosscut saw (year of manufacture: 1995) For cross-cutting and trimming timber in industrial applications Chain log conveyor line – 4 m Cassel Metal Shark® Octa – metal detector Fsdpjwlaxkofx Ahmsph Discharge roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: excellent Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, 1 overhauled Paul flitch separator, 2-lamella design, right: fixed lamella, left: movable lamella (for a left-hand machine) total length: 5.50 m total width: 850 mm roller pitch: 500 mm roller width: 790 mm for max. wood length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers removed and fitted with new ball bearings. Movable lamella mounted on 4 ball-bearing-supported guides, easy to move, with new roller chain and 11 new return pulleys. Robust sheet metal lining between all rollers. As new condition. Fpodpfx Ahjtx A Sxomeh

Stanje: dober (rabljeno), Board Sorting Line / Sorting System / Length Sorting Line Esterer Right Discharge 5 Sorting Bins Total Length 26 Meters Fpjdpfx Ahegw Scqemsh 1st Bin: 2 Meters 2nd Bin: 3 Meters 3rd Bin: 4 Meters 4th Bin: 5 Meters 5th Bin: >5 Meters Good condition – immediately available Location: Germany, near Landau an der Isar Please also see my other listings. I look forward to your inquiry.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 30.000 l, skupna višina: 7.200 mm, notranji premer: 2.500 mm, zunanji premer: 2.900 mm, skupna masa: 6.000 kg, debelina stene: 10 mm, stenska struktura: enoslojni, Število komor: 1, premer odprtine jaška: 600 mm, tlak (maks.): 3 letvica, Buffer Tank – 30,000 L, Vertical, Insulated Volume: 30,000 liters Internal diameter: approx. 2,500 mm External diameter (with insulation): approx. 2,900 mm Cylindrical height: approx. 5,520 mm Total height: approx. 7,200 mm Empty weight: 6,000 kg Operating pressure: +3.00 bar Operating temperature: -10 / +900°C Medium: Water Density: 1,000 kg/m³ Bottom plate wall thickness: approx. 11 mm Shell/cylinder wall thickness: approx. 10 mm Material / Properties Shell material: P265GH / S235JR Insulation: 200 mm mineral wool Cladding: Smooth aluminium sheet (weatherproof) Mineral wool insulation will be newly applied, so the insulation thickness can be freely chosen. Equipment Mounting type: Feet Number: 4 Attachment: fixed Top head type: Dished end (Klöpperboden) Bottom head type: Dished end (Klöpperboden) Fodpfxexdknkj Ahmjph Connections: 1 manhole DN 600 with blind cover 7 x 1/2'' socket for temperature sensors 2 lifting lugs in the shell area 2 lifting lugs on the top head 2 lifting lugs on the vessel feet 1 drain 2'' at the vessel bottom, routed outside and terminating in a 2'' ball valve 1 vent Ø33.7 x 3.6 mm, routed downwards inside the insulation at the side of the tank and terminating at the manhole cover cap 1 connection DN 125, externally ends in flange, internally terminates in 90° bend at the vessel center 1 connection DN 125, externally ends in flange, internally terminates in 90° bend at the vessel center Documentation: Drawing

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Cambio 500 debarking system consisting of: Infeed centering device. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. Feed speed 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Fsdpfx Ahswxdimsmoph Tilting bin for long timber. Spare parts.

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW Fpodewvqklopfx Ahmoh • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: novo, Leto izdelave: 2026, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, skupna masa: 66 kg, Naša električna verižna žaga s 5 kW je odlična za žaganje snopov metrske drvi v kombinaciji z našim žagalnim kozlom. S žaganjem celih snopov drv/kurilnega lesa prihranite ogromno ročnega dela! V enomanskem načinu je mogoče v nekaj minutah obdelati do 1 kubičnega metra lesa in približno 5 kubičnih metrov na uro. Povprečni čas za en rez je 1,5 minute. Fjdpfx Aefnrx Tshmeph

Stanje: rabljeno, No. 3264 Complete Sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Comprising: - Log cross-cut table with driven conical rollers Hecht length measurement with remote-controlled light barriers - 1 transverse conveyor to saw frame 7000 x 5500 mm (LxW) Cam chains in mint condition - 1 transverse conveyor 3800 x 4000 mm (LxW) - 1 roller conveyor in front of the frame, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for model timber, cross withdrawal with 2 switching flaps - Fast clamping carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feed in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year 1994 Passage width 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log alignment with adjustable laser, round timber measurement Hecht, tensioner Jansen, hangers, 60 saw bands, setting gauge - Powered splitting wedge with chain bed Möhringer 230-292, year 1994 With pre-cutting, light barriers and laser for adjustment - 1 roller conveyor 4000 x 1400 mm (LxW), with corrugated rollers, cross withdrawal with air cylinders - 1 S-conveyor with buffer 3500 x 4000 mm (LxW), Albert pusher made from square tubing - 1 S-conveyor 3000 x 5500 mm (LxW), motor with adjustable slip coupling, function monitoring, pusher from angle steel - 1 under-table cross-cut saw Paul 15 AO, year 1992 - 1 double edger Paul KME 2 / 750 R, year 1988 With chip separator, right bushing motorized adjustable, inline cross-cutting, length sorting, presetting programs Österle - 1 conveyor belt 7400 x 400 mm (LxW) - 1 conveyor belt 4000 x 400 mm (LxW) - 1 conveyor belt 3000 x 500 mm (LxW) - 1 trough conveyor approx. 6500 x 500 mm (LxW), inclined, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm (LxW), inclined, for woodchips - 1 trough conveyor HOLTEC, horizontal, with left/right feed for box distribution - Drum chipper HAAS, passage width 600 mm, passage height 150 mm, with vibrating chute - Frame saw sharpening machine OPL Fedpfx Ahoyzr Tfsmsph - Setter VOLLMER GSA, year 1996 - Frame saw sharpening machine VOLLMER (minor repairs required, feed cylinder bent) Sale on behalf of a customer, ex location near 34125 Kassel, without dismantling, transport or installation Dismantling, loading, and transport available as an option at extra cost Errors in description and price reserved To prevent possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is as-is Technical specifications, condition description, year of manufacture, and scope of delivery are according to manufacturer brochure or previous owner, without guarantee Interim sale reserved For used machines, all warranties are excluded; the rule applies: "purchased as inspected" Pictures and videos are for reference and do not represent the actual scope of delivery Payment terms: Prices plus legally applicable VAT, payment before collection or dispatch Delivery terms: ex location