Weinig Unimat 23 El nakup rabljenega (474)

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, delovna višina: 200 mm, višina rezkanja: 200 mm, Ogled je možen po predhodnem dogovoru. Bwjdeybbt Tjpfx Aa Soh

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 6904 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 130 mm 6 spindles: 1) Bottom horizontal 230 mm, 5.5 kW 2) Right vertical 130 mm 3) Left vertical 130 mm (spindles 2 and 3) 7.5 kW 4) Top horizontal 230 mm, 5.5 kW 5) Bottom horizontal 230 mm, 5.5 kW 6) Universal 230 mm, adjustable at 360°, 5.5 kW - All spindles adjustable vertically and horizontally - Spindles 1, 2, 3, 4, 5 equipped with electric brake - Spindle diameter: 40 mm - 5 powered, toothed, top infeed rollers - 4 powered, rubber, smooth top outfeed rollers (including 2 double) - 1 bottom powered rubber roller - Feed on Cardan (universal joint) rollers Bjdpfxox Rq Iye Aa Sewh - Pneumatically pressed rollers - Stepless feed speed adjustment - Feed motor: 4 kW - Working pressure: 6-10 bar - Electric thickness adjustment - Lifting motor: approx. 0.55 kW - Central table lubrication - Infeed table length: 1970 mm - Extraction port diameter: 2x140 mm, 4x135 mm - Dimensions (L/W/H): 4430 x 1830 x 2000 mm - Weight: approx. 3500 kg ADVANTAGES – German-made, WEINIG brand – 6-head configuration – Operating and maintenance documentation (DTR) – Universal spindle – Used planer, in very good condition Net price: 97,900 PLN Net price: 23,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price subject to change if the rate fluctuates significantly)

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: nepreverjeno, delovna širina: 220 mm, višina skobljanja: 120 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 120 mm, skupna masa: 7.500 kg, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 10, moč: 105 kW (142,76 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Hydromat 22 B With grooved bed 10 spindles Working width: 220 mm Working height: 120 mm Spindle diameter: 50 mm Bodpfxsu Udd Sj Aa Sowh Feed: 7.5 kW / 8–40 m/min Spindle arrangement: 1–Bottom (7.5 kW) – with hydro clamping 2–Right (7.5 kW) 3–Left (11 kW) 4–Right (7.5 kW) – with straight jointer 5–Left (7.5 kW) 6–Top (15 kW) – with hydro clamping 7–Bottom (7.5 kW) – with hydro clamping 8–Top (7.5 kW) – with hydro clamping and straight jointer 9–Bottom (7.5 kW) – with hydro clamping and straight jointer 10–Universal (7.5 kW) 6 powered rollers in the table

Stanje: rabljeno, Na voljo: 2 kosa Cena na kos: 239,00 € + DDV. Rezila: Noži za tračno skobljanje Z2 + posnemalni rezkar Obodni premer (ø): 125 mm Izvrtina: 40 mm Dolžina: 170 mm Material: jeklo Bwodox Tu Rwspfx Aa Sjh

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Prodam avtomat za zlaganje rezanega lesa Weinig / Joulin. Dolžina obdelovanega lesa 3–6 m. Stroj je delujoč in v dobrem stanju. Cena: 8.500 EUR. Več informacij po telefonu ali e-pošti. Bwjdpfjw I S Uhox Aa Soh

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Weinig Unicontrol 10 Year of manufacture: 1996 Technical condition: very good Bjdpfx Aaewbikbo Sewh Description: The Weinig Unicontrol 10 is an automatic CNC machine designed for planing and profiling wooden components, particularly used in the production of window and door joinery. It combines four-sided planing with precise profiling capabilities. Main features: ✅ Automatic adjustment of spindles and guides via CNC system ✅ Very high machining accuracy – ideal for series production ✅ Quick machine changeover thanks to profile settings memory ✅ Robust and durable frame construction ✅ Capability to work with various types of wood – both soft and hard Included: Weinig Univar 6, year of manufacture: 1996, also in very good condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, The Weinig Dimter OptiCut 350 is an advanced wood optimizing saw widely used in the timber industry for dimensional cutting with simultaneous material optimization. This machine offers high-precision cutting at high speeds, maximizing raw material utilization and minimizing material waste. Year of manufacture: 2005 Technical condition: very good Technical specifications: 1. Infeed length of elements: - Maximum length: 6,200 mm - Minimum length: 500 mm 2. Element width: - Maximum width: 300 mm - Minimum width: 40 mm 3. Element thickness: - Maximum thickness: 100 mm - Minimum thickness: 15 mm 4. Cutting speed: - Maximum cutting speed: 250–350 cuts per minute - Material feed speed: up to 200 m/min 5. Cutting tool: - Saw blade rpm: approx. 3,000 rpm 6. Control system: - CNC control with advanced PLC for precise process management - Optimization data input for maximizing material utilization and minimizing waste - Touchscreen interface for machine operation and parameter input 7. Optimization system: - Equipped with a defect detection system (manual or automatic defect marking) for excluding defects during cutting - Length optimization function based on production requirements (e.g., waste minimization, maximizing number of elements of specific lengths) 8. Material feeding system: - Automatic element feeding system - Integrated conveyors and transport systems for efficient material flow through the machine 9. Waste management: - Waste removal and sorting system for separating defective wood - Number of ejectors: 9 pcs 10. Cutting accuracy: - High cutting precision, with accuracy up to ±0.5 mm depending on wood parameters and machine settings 11. Power supply: - Standard supply: 400 V, 50 Hz Additional features: - Automatic defect marking: Operator can mark wood defects (e.g., knots, cracks), and the machine automatically optimizes cuts to avoid these sections Bjdpfxjv Dm U Rs Aa Sowh - Safety: Equipped with advanced safety systems, such as lock sensors and protective covers Application: The Weinig Dimter OptiCut 350 optimizer is ideal for the timber industry, especially in facilities producing structural wood components, furniture elements, or for solid wood processing. Its optimization capabilities significantly increase work efficiency and reduce material losses.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Weinig Powermat 600 Year of manufacture: 2014 5 spindles Feed motor: 3 kW 1st motor: 7.5 kW 2nd motor: 11 kW 3rd motor: 7.5 kW 4th motor: 7.5 kW Bodsxwtwbepfx Aa Sjwh Spindle configuration – bottom, right, left, top, bottom Soft start Heated control cabinet (Webasto) Pneumatic tables Manual adjustment of table tops Electronic brakes Manual axis adjustment Stepless feed speed adjustment

Stanje: dober (rabljeno), Širina skobljanja 610 mm Stabilna lita izvedba Poravnalni trak Pomožni prislon 4 kW, 380 V Nožna gred z 2 klini Mize zložljive navzgor Stroj je takoj pripravljen za uporabo Bodex U Dgdopfx Aa Sewh

Stanje: dober (rabljeno), Leto izdelave: 1966, Omejevalnik za rezkalni stroj z natančno nastavitvijo Vrtliva miza Prečna žaga Podaljšek mize Aigner z dovajalno napravo Holz-Her ETZ, 8 hitrosti Bwsdpsx U Dfgsfx Aa Soh 380 Voltov

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window manufacturing line ----- For sale on behalf of a customer Manufacturer’s description: For the production of individual parts, elements, and small series. Spindle configuration: One crosscut saw, one single-sided tenoning and slotting spindle, one right-side profiling spindle, one tenoning/slotting spindle, and profiling spindle suitable for stacking multiple tools, with pneumatic spindle movement. Slotting table with motor-driven table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit; manual adjustment of feed height. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for adjusting outer frame or sash measurements. Control of tool positions (longitudinal and cross machining) via rotary switch at the control panel. Technical data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 – IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 – IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 232 mm Motor: 11 kW Special equipment: Synchronised spindle ----- Bsdpfxjx Tu N He Aa Sjwh Pneumatically actuated forward-back motion for tear-free profiling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool base diameter: 112–140 mm, Max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for synchronised spindle from 4 kW to 7.5 kW Screen control for 99 window types, 1 type can include up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles; manufacturing options: single parts, double parts, by frame, series production, remachining. Data entry via keyboard with integrated user guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, feather key 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial stroke: 2 positions Radial stroke: 2 positions Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 Hardware milling unit, right: ----- For milling the hardware groove during contouring or grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch at the control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting diameter: min. 140 mm, max. 180 mm Base position below table: 10 mm Special version of hardware milling unit: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial stroke: 2 positions Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter in and above table Electric height adjustment of the feed rollers with selector switch at the control panel for 2 wood dimensions, inclu...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Catalogue number 7706 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm Bodpfeyfg Ttsx Aa Sswh - 5 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm 3) Left vertical: 120 mm; 2 and 3 – 7.5 kW 4) Top horizontal: 220 mm, 5.5 kW 5) Bottom horizontal: 220 mm, 4 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - Pneumatic pressure rollers - Infeed from above: 4 driven feed rollers, toothed (including 1 double roller) - Outfeed from above: 1 driven smooth rubber feed roller - Outfeed from below: 1 driven rubber feed roller - Feed drive via Cardan shafts - Infinitely variable feed speed: 6–36 m/min - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - With brake - Electric thickness adjustment - Central table lubrication - Infeed table length: 1970 mm - Extraction port diameter: 4 x 120 mm, 140 mm - Dimensions (L/W/H): 3450 x 1600 x 1450 mm - Weight: 1112 kg Net price: 44,900 PLN Net price: 10,690 EUR (based on exchange rate 4.2 EUR) (Prices may vary in case of significant exchange rate fluctuations)

Stanje: rabljeno, Leto izdelave: 1993, Kataloška številka 7705 TEHNIČNI PODATKI - maks. širina obdelovanca: 220 mm - maks. višina obdelovanca: 160 mm – 4 vretena: 1) vodoravno spodaj 220 mm 5,5 kW 2) desno navpično 160 mm 3) levo navpično 160 mm; (2. in 3. vreteno) 11 kW 4) vodoravno zgoraj 220 mm z električnim nastavljanjem gor/dol 7,5 kW - vsa vretena so nastavljiva gor/dol, desno/levo - premer vreten: 40 mm - zgoraj 4 vlečni vodilni valji, zobati, kovinski - zgoraj 1 dvojni izstopni vlečni valj, gumiran - spodaj izstopni vlečni valj, gumiran - podajanje preko Kardanske gredi - brezstopenjska nastavitev hitrosti podajanja - motor za podajanje: 2,2 kW - motor za dvig: 0,55 kW - električno nastavljanje debeline skobljanja - dolžina dovajalne mize: 1970 mm - centralno mazanje Bwsdpoyfg S Njfx Aa Seh - premer sesalnih nastavkov: 3x120 mm, 140 mm - zaprto v kabini - dimenzije d/š/v: 3500x1600x1500 mm - teža: 1620 kg Nett cena: 33.900 PLN Nett cena: 8.070 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo ob večjih nihanjih)

Stanje: rabljeno, Leto izdelave: 1980, No. 3192 Four-Side Planer WEINIG U 17 A Used, year of manufacture 1980, machine available from February 2025 Machine still in operation 6 spindles Spindle arrangement: bottom – right – left – top – bottom – bottom Working width: 170 mm (with a tooling circle of 125 mm) Working height: 120 mm (with a tooling circle of 125 mm) Jointing spindle: 4 HP All other spindles: 5.5 HP Feed: 2 or 3 HP Spindle speed: 6000 rpm Working spindle diameter: 40 mm Smallest tooling circle diameter of profiling spindles: 100 mm Largest tooling circle diameter of profiling spindles: 180 mm Feed continuously variable: 6 – 18 m/min Feed roller diameter (hardened): 140 mm Feed roller width: 50 mm Adjustment range of infeed table and jointing fence (right): 10 mm Adjustment range of vertical spindles below table: 40 mm Adjustment range of horizontal spindles (axial): 30 mm Straightening table length: 2 m Sale on behalf of customer, ex location Upper Austria, without dismantling, transport, or installation Errors in description and price excepted Dismantling, transport, and loading by us possible as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale No warranty is provided for used machinery; sale is "as inspected" Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Bwsdpfxjvkhcce Aa Ssh Delivery terms: ex location

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, delovna širina: 180 mm, višina skobljanja: 120 mm, širina skobljanja: 180 mm, Ponujamo rabljeni štiristranski skobeljni stroj Weinig Quattromat 18, letnik 1996, pripravljen za uporabo. Če imate vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite. Bwedpfx Aox Rvr Doa Sjh

Stanje: rabljeno, Mehanizacija podjetja Weinig. Podajalna hitrost do 43 m/min. Širina - 300. Višina - 150. Bwjdpexg Satofx Aa Soh

Stanje: rabljeno, Leto izdelave: 1962, Rabljeni stroj Leto izdelave: 1962 Bwodpfx Ajw Sbbrsa Seh Oprema in tehnični podatki: Širina skobljanja: 630 mm Delovna višina: 250 mm Dolžina mize: 1100 mm Priključek za odsesavanje: 160 mm Rezila: 4 segmentna skobeljna rezila Stroj nima motorne zavore! Lokacija: Flörsheim Razpoložljivost: takoj

Stanje: rabljeno, Rezilo: Rezilo za letevni skobeljnik Z4 Premer kroženja (ø): 163 mm Bjdox R Ulcspfx Aa Sowh Izvrtina: 50 mm Dolžina: 150 mm Material: Jeklo

Stanje: dober (rabljeno), Leto izdelave: 2011, Weinig Conturex C4500 CNC Fensterfertigungsanlage Beschreibung: Baujahr: 2011 Arbeitsbreite: 25–260 mm Arbeitshöhe: 10–150 mm PowerGrip-Spanntisch 3.000 mm Werkstücklänge: 180–4.500 mm Erste Bearbeitungseinheit - 20 kW Motor - HSK 63F Werkzeugaufnahme - Elektr. Drehzahlregelung 0–18.000 U/min (links/rechts) - Werkzeugdurchmesser max. 330 mm - Sägeblattdurchmesser 280 mm - Werkzeugmagazin mit 18 Plätzen (100 mm Abstand) Zweite Bearbeitungseinheit - 20 kW Motor - HSK 63F Werkzeugaufnahme - Elektr. Drehzahlregelung 0–18.000 U/min (links/rechts) - Werkzeugdurchmesser max. 330 mm Bwjdpfxjydkzxj Aa Seh - Sägeblattdurchmesser 280 mm - Werkzeugmagazin mit 18 Plätzen (100 mm Abstand) PowerGrip-Auslauf Werkzeugmagazin mit 110 Plätzen (87,5 mm Abstand) Abfallförderband Detaillierte Beschreibung auf Anfrage Verfügbar ca. KW 30/31 – 2026 (Trotz größtmöglicher Sorgfalt sind alle Änderungen, Irrtümer in technischen Daten, Preisen und Angaben sowie (Tipp-)Fehler vorbehalten. Keine Garantie auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Preise exkl. Inserierungskosten MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: zelo dobro (rabljeno), - Število vreten: 4. Bwjdpjygy Tpjfx Aa Ssh - Maks. širina skobljanja: 120 mm. - Maks. višina skobljanja: 100 mm. - Moč motorjev: pogosto 4 x 3 kW. - 4 hitrosti pomika - Premer vretena: 30 mm

Stanje: rabljeno, Originalna Weinig natakljiva os za lažjo menjavo težkih orodij na horizontalnih vretenih. Premer: 50 mm Bwedpfxex Ru S Ne Aa Soh Vpenjalna dolžina: 410 mm

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), moč vretenovega motorja: 11.000 W, največja hitrost vretena: 6.000 obr/min, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust, used window production machine with a working width of 40–220 mm and a motor power of up to 15 kW for various machining units. The machine features advanced options such as a synchronization device, electronic height adjustment, and an automatic turning system to enable efficient single-operator workflow. If you’re looking for a high-quality milling machine, we recommend considering the Weinig Unicontrol 10-5, which we have available for sale. Please contact us for further information. • Capacity • Working width: 40–220 mm • Working height (longitudinal processing): 40–100 mm • Working height (cross processing): 40–100 mm (grain height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length at 320 mm tool diameter Bwsdpfx Aaex S Sk Eo Soh • Feed unit (cross processing) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 hold-down clamps • Length stop: with scale and magnifier for measurement of sash or frame external dimensions • Counter: pneumatically indexed, 4 positions (not suitable for Studio windows), up to a maximum timber height of 80 mm • Double workpiece package: single or double part feed system, with cross separation and retention system • 1st workpiece (lying against stop) wood width: 55–90 mm • 2nd workpiece wood width: 130 mm • Feed unit (longitudinal processing) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (continuously adjustable via frequency inverter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Processing units • Cross-cut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool stroke: max. 400 mm • Axial adjustment: pneumatic against four-position turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool stroke: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For cross-cut saw and profiling/cutting units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially switched: 2 positions • Axially switched: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 210 mm • Tool clamping length: 160 mm

Stanje: delavnici obnovljeno (rabljeno), 1 x Electronic Motor Brake EMG15 Power range: 3 to 15 kW Voltage range: 200–575 V 50 Hz / 60 Hz Siemens EMG 15 Bwsdpfxsydk Tus Aa Soh Motor brake suitable for Weinig planing machines Unimat and Hydromat

Stanje: delavnici obnovljeno (rabljeno), 1 x Electronic Motor Brake EMG15 Power range: 3 to 15 kW Bwjdeydk Tnspfx Aa Soh Voltage range: 200–575 V 50 Hz / 60 Hz Siemens EMG 15 Motor brake suitable for Weinig planing machines Unimat and Hydromat

Stanje: rabljeno, Weinig Powerlock L=240 Z=2 cutterhead with rebate cutter underneath Bjdpjydk Ryofx Aa Sewh Type 536, diameter 93 mm 536.095.04 Centrolock reversible knife system Z2 Mounting: PowerLock HSK Length: 240 mm Price: 500 euros