Weinig Powermat 2000 nakup rabljenega (471)

Stanje: rabljeno, Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. With the following machining units: Crosscut saw ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Haunching and tenoning spindle ---- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm Hedpfxjxpi Due Ab Sew spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).

Stanje: dober (rabljeno), Leto izdelave: 1974, old but sturdy cast-iron planer Hjdjturkyspfx Ab Sjw planing width: 50 cm table length: 250 cm two-knife cutterhead

Stanje: rabljeno, Avtomatski stroj za skobljanje in profiliranje Weinig Hydromat 23 za štiristransko skobljanje in profiliranje lesa in tramov z visokim pomikom ter 4 pogonskimi valji v mizi. Vreten: 8 Delovna širina: 230 mm Delovna višina: 160 mm Vreteno 1: Spodaj / 11 kW / 50 mm Vreteno 2: Desno / 11 kW / 50 mm Hodpfxexp Hqle Ab Sow Vreteno 3: Levo / 11 kW / 50 mm Vreteno 4: Desno / 7,5 kW / 50 mm Vreteno 5: Zgoraj / 11 kW / 50 mm Vreteno 6: Spodaj / 18,5 kW / 50 mm Vreteno 7: Zgoraj / 7,5 kW / 50 mm Vreteno 8: Spodaj / 7,5 kW / 50 mm Pomik: maks. 60 m/min // 11 kW // Hidravlični Dobavni rok: na zahtevo

Stanje: rabljeno, Weinig Profimat 22 with 4 left mobile units, equipped with a measuring sensor for automatic adjustment based on the width of the workpieces being processed. Hjdpjryb D Sefx Ab Sjw Dimensions and weight: 330 x 145 x H160 cm. Weight: 1,400 kg (on pallet).

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: nepreverjeno, delovna širina: 220 mm, višina skobljanja: 120 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 120 mm, skupna masa: 7.500 kg, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 10, moč: 105 kW (142,76 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Hydromat 22 B With grooved bed 10 spindles Working width: 220 mm Working height: 120 mm Spindle diameter: 50 mm Feed: 7.5 kW / 8–40 m/min Spindle arrangement: 1–Bottom (7.5 kW) – with hydro clamping 2–Right (7.5 kW) 3–Left (11 kW) 4–Right (7.5 kW) – with straight jointer 5–Left (7.5 kW) 6–Top (15 kW) – with hydro clamping 7–Bottom (7.5 kW) – with hydro clamping 8–Top (7.5 kW) – with hydro clamping and straight jointer 9–Bottom (7.5 kW) – with hydro clamping and straight jointer 10–Universal (7.5 kW) 6 powered rollers in the table Hjdpfx Absu Udd Se Ssw

Stanje: rabljeno, Leto izdelave: 1962, Rabljeni stroj Leto izdelave: 1962 Oprema in tehnični podatki: Širina skobljanja: 630 mm Delovna višina: 250 mm Dolžina mize: 1100 mm Priključek za odsesavanje: 160 mm Rezila: 4 segmentna skobeljna rezila Stroj nima motorne zavore! Hedpfx Abew Sbbre Sjw Lokacija: Flörsheim Razpoložljivost: takoj

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 5.300 mm, hitrost pomika os X: 60 m/min, delovna širina: 230 mm, premer vretena: 180 mm, delovna višina: 160 mm, moč pogonskega motorja podajalnika: 9.000 W, največja hitrost vretena: 6.000 obr/min, vrsta nastavitve višine: električni, število vreten: 6, moč: 127 kW (172,67 KM), vhodni tok: 241 A, premer napajalnega valja: 140 mm, Oprema: motorna zavora, Popolna in delujoča skobeljna linija Hydromat 3000 z delilnim rezilom. Idealna za avtomatizirano proizvodnjo fasadnih/ talnih oblog in strešnih letev. Linija vključuje: avtomatsko podajanje z razkladalno nagibno mizo, posamezno podajanje desk v skobeljnico, postajo za minibundlanje, čelilnik ter avtomatsko zlaganje v pakete. Končni paket se avtomatsko spusti na vmesni transportni trak za PET-ovijanje. Hodpfxsrk Nklj Ab Sow Linija se prodaja zaradi nadgradnje kapacitet. Več informacij o liniji na zahtevo.

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 6 Hedpfx Ajthk T Iob Sew Spindle arrangement: 1. Bottom 7.5 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 11 kW 5. Top 11 kW 6. Bottom 7.5 kW Total power: 56 kW Feed speed adjustable via frequency inverter Memory system Pneumatic pressure units divided into 3 sections 4 rows of steel infeed rollers 2 rows of rubber feed rollers 1 roller on the table driven by cardan shaft Infeed table length: 1,980 mm Working tables made with Marathon Coating technology CE certificate Suction ports: 6 x 140 mm Machine dimensions: 394 x 185 x 195 cm (H)

Stanje: rabljeno, Hobellinija Weinig tip Unimat 23 E + Uniplan 23 in vključno z vračilnim transporterjem. Hodpfxexnlhye Ab Sow NC vodena linija za skobljanje in profiliranje okenskih letev, vključno z izrezovanjem zasteklitvenih letvic ali drugimi skobeljskimi nalogami z avtomatskim vračanjem obdelovancev k upravljavcu. Vretena: 4 + 2 Delovna širina: 230 mm Delovna višina: 120 mm Vreteno 1: 7,5 kW / 50 mm / 8.000 vrt/min Vreteno 2: 11 kW / 50 mm / 8.000 vrt/min Vreteno 3: Skupni motor z vretenom 2 / 50 mm / 8.000 vrt/min Vreteno 4: 7,5 kW / 50 mm / 8.000 vrt/min Vreteno 1 Uniplan: 5,5 kW / 50 mm / 7.200 vrt/min Vreteno 2 Uniplan: 5,5 kW / 50 mm / 7.200 vrt/min Podajanje: 5-24 m/min Upravljanje: PC-krmiljenje Nexus NC-osi: Unimat 2 & 3, Uniplan 1

Stanje: generalkompletno obnovljen (rabljeno), Weinig moulder, model 22A Unimatic Working table width: 220 mm, with grooved table for short workpieces. Cardan shaft feed system. Motor configuration and power ratings: Hsdpfxeu Sr Ddo Ab Sjw Bottom spindle: 5.5 kW Right spindle: 5.5 kW Left automatic spindle (movable spindle): 5.5 kW Right spindle: 5.5 kW (note: appears twice, clarify if two right spindles) Top spindle: 5.5 kW Bottom spindle: 5.5 kW (listed again, please confirm total number of spindles) Feed motor: 4 kW Hydraulic unit for left automatic spindle: 0.9 kW The left movable spindle automatically adjusts according to the width of the inserted workpiece.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč pogonskega motorja podajalnika: 11.000 W, Weinig hydraulic feed Feed speed: 120 m/min Hedpfov Skbkox Ab Sjw Motor power: 11 kW

Stanje: rabljeno, Number of spindles: 3 pcs. Number of tool sets: 1.3/4.1 pcs. Spindle diameter: 50, 40 mm Spindle length: 120, 320, 125 mm Weight: 2500 kg Loading dimensions (L x W x H): 3800 x 1400 x 2000 mm Table length: 3470 mm Weinig Univar 6 P For sale on behalf of client ----- Operating voltage: 380 volts, 50 Hz. For re-milling windows, doors, and similar items with asymmetrical continuous profiles. Aggregate arrangement: 1. Climb-cut spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle The profiling spindle is suitable for holding several tools stacked above each other. Spindle movement is pneumatic. To achieve tear-free re-milling, spindle 1 works in climb-cut mode. For the last 100 mm of each frame end, this spindle plunges with the corresponding tool into the wood to avoid tear-out at the frame corners. Machine body, tables, fences: The machine body is made of heavy, torsion-free, and vibration-damping elements. Fences on the right in the profiling area are made of Pertinax. In front of the profiling spindle there is a split fence with sliding rail for short parts. Additional stop rail for large-format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blowing system for cleaning feed rollers and table. Spindles, hood: Spindles feature high concentricity and are dynamically balanced. Extraction hoods are designed for optimal chip flow. Easiest tool changes thanks to quickly opened hood covers. Machine operation, adjustment aids: Operation from the front side. Adjustment of the fences to the tool diameter via mechanical digital display. Electrical system, motors, control: Electrical equipment according to DIN VDE 0113 - Electrical equipment of industrial machines EN 60204 IEC 204-1. Other electrical regulations are not considered. Motors dynamically balanced. Control of tool positions via selector switch from the control panel. Tools: Machine equipped with set-up tools, but without processing tools. SPINDLE 1 Climb-cut spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 120 mm Max. tool diameter (re-milling): 232 mm Tool zero flight circle: 112-140 mm Base position below table: 10 mm Motor power: 4 kW (5.5 kW) SPINDLE 2 Number of tools: 4 Spindle travel vertical: 3 x 80 mm = 4 tools Optionally switchable to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50 mm/35 mm Feed roller diameter: 95 mm Fence height: 70 mm Working width: min. 30 mm; max. 220 mm Hsdpfxsxpi Els Ab Sew Working height: min. 30 mm; max. 100 mm Workpiece length without tenon: min. 245 mm Max. tool diameter With zero diameter 112 mm: 210 mm With zero diameter 140 mm: 232 mm Max. tool diameter (re-milling): 232 mm Tool zero flight circle: 112-140 mm Base position below table: 10/5 mm Motor power: Spindle: 11 kW, Feed: 1.1 kW Feed profiling unit: stepless 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Fence height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100 mm Workpiece length without tenon: min. 245 mm Special equipment: 3 mechanical spindle br...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Zelo lep, malo rabljen Weinig U 23 z utorasto posteljo. Tehnična oprema na zahtevo. Hedexpm Sispfx Ab Sjw

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Hjdpfx Ajxn U Amsb Ssw Teža stroja: 3200 kg Stroj WEINIG Unimat 23 E je bil izdelan leta 1999 in je zasnovan za učinkovito skobljanje lesa. Idealna izbira za strokovnjake v lesnopredelovalni industriji, ki želijo povečati svoje proizvodne zmogljivosti. Za več informacij nas kontaktirajte. Področje uporabe Skobljanje

Stanje: rabljeno, Štiristranska skobeljna WEINIG Quattromat 18 - rabljena - Sistem obojestranskih nožev, črpalka za mazivo, preizkušena za prah ----- Tehnični podatki ----- Hedpfx Ajxqd Aheb Sow Širina skobljanja: 180 mm, Višina skobljanja: 120 mm, Število vreten: 4, Hitrosti podajanja: 8 m/min, Premer odsesovalnih priključkov: 4x 120 mm, Dimenzije (DxŠxV): 3.050x1.000x1.500 mm, Teža: 1200 kg

Stanje: rabljeno, Four-side planer, Weinig brand, model Unimat U17N with 7+1 spindles, spindle length 170 mm, equipped with fluted table and cardan shaft feed. Spindle configuration: Hsdpfx Ajpfp Eleb Sew Bottom, right, left, right, top, bottom, left, universal. Spindle motor power: 4+4+5.5+5.5+7.5+5.5+5.5+7.5 kW. Feed motor power: 4 kW, raise and lower: 0.75 kW.

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Štiri-stranska skobeljna Weinig Hydromat 23, lamelirni stroj Hjdpoxqh E Hsfx Ab Sew 8 vreten, Delovna širina: 230 mm, Delovna višina: 160 mm, Premer vretena: 50 mm, Podajanje: 7,5 kW / 6 – 36 m/min, Razporeditev vreten: 1–spodaj (7,5 kW) 2–desno (7,5 kW) 3–levo (7,5 kW) s profilnim jointerjem 4–desno (7,5 kW) s profilnim jointerjem 5–zgoraj (7,5 kW) s hidravličnim vpenjanjem 6–spodaj (30 kW) s hidravličnim vpenjanjem 7–zgoraj (7,5 kW) s hidravličnim vpenjanjem in ravnalnim jointerjem 8–spodaj (7,5 kW) s hidravličnim vpenjanjem in ravnalnim jointerjem. Trda prevleka. Dva gnana valja v mizi.

Stanje: rabljeno, Leto izdelave: 1998, Dimensions (L x W x H): 450 x 222 x 190 cm Price: On request - Year of manufacture: 1998 - Documentation available: No - CE marking present: Yes - Serial number: 83929 - Number of spindles [pcs]: 5 - Spindle 1: - Spindle type: Horizontal spindle Hsdpfxoxr U Nuj Ab Ssw - Motor power [kW]: 7.5 - Spindle 2: - Spindle type: Vertical spindle - Spindle 3: - Spindle type: Vertical spindle - Motor power [kW]: 11 - Spindle 4: - Spindle type: Horizontal spindle - Motor power [kW]: 11 - Spindle 5: - Spindle type: Horizontal spindle - Motor power [kW]: 7.5 - Transport dimensions: 4500mm x 2220mm x 1900mm (L x W x H) - Transport packages [pcs]: 1 Financial Information VAT: The indicated price is subject to VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in available at any time for all items from the industrial sector Yorick Diebels

Stanje: rabljeno, Vmesni obroči, distančniki z notranjim premerom: 40 mm. Slika je simbolična Hjdpfx Asxmh T Aob Sjw Na voljo kompletov: 5 Cena na komplet: 30,00 € + DDV. Notranji premer (d): 40 mm Zunanji premer (D): 60 mm Širine posamezno: 25/10/10/8/8/5 mm

Stanje: rabljeno, Leto izdelave: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on upper spindle with dual-axis control for left and upper spindles. Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 pcs 1st spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW 2nd spindle: right Spindle diameter: 40 mm Clamping length: 170 mm Speed: 6000 rpm Motor power: 11.0 kW (shared motor with left spindle) 3rd spindle: left Spindle diameter: 40 mm Clamping length: 170 mm Speed: 6000 rpm 4th spindle: top Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW 5th spindle: bottom Spindle diameter: 40 mm Motor power: 11.0 kW Speed: 6000 rpm Clamping length: 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Vertical adjustment of top spindle: electric Optional with/without feed Feed brake system: Yes Feed speed steplessly adjustable: 3–23 m/min Feed roller pressure: pneumatic Feed drive power: 4.0 kW Feed drive: cardan shaft Lubrication pump: manual Max. jointing depth: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 pc Control type: PLC control Hsdpjwwwkhsfx Ab Sew Spindle position display: mechanical digital readout Infeed rollers before jointer: Yes Air-cushion table: 3-row Central lubrication point: Yes Description: Short infeed table 1050 mm with internal lighting Location: Nattheim

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 6946 TEHNIČNI PODATKI - maks. širina obdelovanca: 210 mm - maks. debelina obdelovanca: 120 mm - število vreten: 2 kosa - premer vretena: 50 mm Zgornji del: Hjdpslhrk Sjfx Ab Sjw - 3 dovodni, vlečni, gumirani, gladki valji, od tega 2 dvojna - 2 izhodna, gumirana, vlečna valja, od tega 1 dvojni - glave na nosilcih - nastavitev glav gor/dol - električna nastavitev višine zgornje glave - električna nastavitev debeline skobljanja - vretena opremljena z zavoro - glavni motor 2×5,5 kW - brezstopenjska nastavitev hitrosti podajanja - podajalni motor 3 kW - podajanje preko kardanske gredi - premer odsesovalnega priključka 2x160 mm - dimenzije d/š/v: 2350x1780x1950 mm - teža: 1882 kg – nemška proizvodnja – brušilni nastavki za ostrenje nožev na glavi – 2 Hydro glavi v kompletu – ni prebarvana – zelo dobro stanje, rabljena skobeljna Cena brez DDV: 33.900 PLN Cena brez DDV: 8.070 EUR Cena preračunana po tečaju 4,2 PLN/EUR (pri večjih spremembah tečaja se cena lahko spremeni)

Stanje: rabljeno, Profiling machine by Weinig, model PFA17N, ribbed table, 8 spindles (bottom 4 kW, right 4 kW, left 5.5 kW, right 4 kW, top 5 kW, bottom 4 kW, universal 4 kW, universal 4 kW), used. Hodpfxjk N I I Nj Ab Sew

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, delovna širina: 220 mm, višina skobljanja: 140 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 140 mm, moč pogonskega motorja podajalnika: 15.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 7, vhodna frekvenca: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, Working height: 140 mm, Spindle diameter: 50 mm, Feed: 15 kW / 6 – 60 m/min, Beesjj3Vck9 Spindle arrangement: Hjdpfx Aboulnr As Ssw 1-Bottom (7.5 kW) with hydraulic clamping 2-Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) 5-Bottom (7.5 kW) with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-Bottom (11 kW) with hydraulic clamping, straight jointer and profile jointer 6 powered feed rollers in the table

Stanje: rabljeno, 10 kosov vmesnih obročev, distančnih obročev z notranjim premerom 40 mm in širino 10 mm. Slika je simbolična Na voljo kompleti: 2 Cena na komplet: 35,00 € + DDV. Hsdsxmh Rhjpfx Ab Sew Notranji premer (d): 40 mm Zunanji premer (D): 60 mm Širina: 10 mm

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, širina brušenja: 240 mm, vrsta vhodnega toka: trifazni, Weinig Rondamat 168 knife grinding machine Maximum tool diameter: 350 mm Grinding wheel diameter: 150 mm Tool length: 240 mm Hedpsufcnqefx Ab Sow Main cutting angles up to 25° Motor: 1.1 kW