Weiler Lzd 220 nakup rabljenega (184)

Stanje: rabljeno, Turning length: 500 mm Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Tsdpsxacgdofx Agpef Spindle bore: 36.0 mm Spindle mount: DIN 55022 Size 5 Tailstock quill: Morse taper 3 Quill travel: 90.0 mm Spindle speed: 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement: 3.3 kW Voltage: 380 V Machine weight approx. 620 kg Dimensions (LxWxH): 1420 x 700 x 1200 mm From a vocational school – very good condition (!!) Regular WEILER factory service Especially suitable for medium-precision turned parts Equipment: - Robust lead- and feed-screw lathe - KLOPFER 4-jaw chuck Ø 140 mm - KLOPFER 3-jaw chuck Ø 140 mm - Collet chuck with extensive set of collets - Hinged chuck guard - Chuck key - MULTIFIX toolpost size A with 3 new inserts - Movable tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for facing and cross slide - Pole-changing drive motor - Machine base with cabinet door (storage compartment) - Chip and splash guard rear wall - Emergency stop button, bottom right - Machine leveling feet - Original operating manual

Stanje: zelo dobro (rabljeno), Swing diameter over bed: 280 mm Swing diameter over slide: 160 mm Turning length: 500 mm Centre height: 140 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 15 - 3550 rpm Spindle nose: DIN 55022 size 5 Feeds - longitudinal: 0.008 - 0.560 mm/rev Feeds - cross: 0.004 - 0.280 mm/rev Tsdpfx Agswngkxepef Thread pitches - metric: 0.2 - 12 mm Leadscrew diameter: 24 mm Leadscrew pitch: 6 mm Tailstock taper: MT 3 Tailstock quill travel: 90 mm Tailstock offset from centre: 15 mm Total power requirement: 2.2 kW Machine weight approx.: 0.6 t Machine dimensions (L x W x H): 1.40 x 0.70 x 1.20 m - Machine from a training workshop - Accessories: Digital readout on 3 axes, RÖHM 3-jaw chuck 160 mmø, MULTIFIX toolpost size A, live centre Machine No. 4684

Stanje: rabljeno, številka stroja/vozila: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Tsdpfx Asuqb Emjgpef Equipped with RSF 3-axis digital readout, 1 piece 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lever-operated collet chuck system with 15 collets. The machine is located at our site in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Stanje: zelo dobro (rabljeno), Univerzalni stružnica, stružnica, stružniška postelja, vodilno-vijačna stružnica -Proizvajalec: WEILER, vodilno-vijačna stružnica tip commodor 42 -Stružniško ležišče: kaljeno -Dolžina struženja: 900 mm -Premer struženja nad ležiščem: 400 mm -Premer struženja nad suportom: 190 mm -Vrtina vretena: Ø 56 mm -Vrtilna hitrost vretena: 45 - 2000 rpm -Trivočna glava: Röhm Ø 200 mm -Štirivočna glava: Röhm Ø 200 mm -Konus konjička: MK3 -Pogonska moč: 4 kW -Dodatna oprema: 18x Multifix nosilec orodja, vrteča konica, glejte slike -Dimenzije stružnice: 2200/1300/H1410 mm Tsdexapm Repfx Agpjf -Teža: 1380 kg

Stanje: dober (rabljeno), npr. primerno za visoko zmogljiv vodilno in vlečno vreteno stružnico WEILER 300 ali drugo Za izvrtine vretena s premerom 38 mm z nosilcem, vlečno cevjo in vpenjalnimi tuleci Ø 1, 2, 3, 4, 5, 6 (2x), 7, 8, 9, 10, 11, 13, 14, 16, 18, 19, 20, 21, 22, 23, 25 mm in za kvadrat □ 6, 8, 10, 12, 16 mm, 1 konična konica s sprejemnikom za vpenjalne tulece … Tsdpfx Ajw Sfitjgpof Siegfried Volz Orodjarni stroji Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Universal lead and feed screw lathe Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted, RAL 7035 light grey Machine no.: 1401 with warranty Includes: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system Tsdpfx Asg R S Rcogpjf - Chip backsplash - Operating manual -Used, as seen-

Stanje: rabljeno, Turning length: 500 mm Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Spindle bore: 36.0 mm Mounting: DIN 55022 size 5 Tailstock quill: 3 MT Quill travel: 90.0 mm Spindle speed: 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement: 3.3 kW Voltage: 380 V Machine weight approx. 620 kg Tsdpjxaccxefx Agpef Dimensions (LxWxH): 1420 x 700 x 1200 mm From a vocational school - very good condition (!!) Regularly serviced by WEILER factory service Especially suitable for medium-precision turned parts Equipment: - Robust lead and feed screw lathe - KLOPFER four-jaw chuck, Ø 140 mm - Collet chuck with a large set of collets - Chuck key - MULTIFIX toolpost type A, with 3x new inserts - Sliding tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for carriage and cross slide - Pole-changeable drive motor - Machine base with cabinet door (storage compartment) - Chip guard rear panel

Stanje: zelo dobro (rabljeno), Swing diameter over bed: 280 mm Swing diameter over cross slide: 160 mm Turning length: 500 mm Centre height: 140 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 15 - 3,550 rpm Spindle nose: DIN 55022 size 5 Longitudinal feeds: 0.008 – 0.560 mm/rev Cross feeds: 0.004 – 0.280 mm/rev Metric threads – pitch: 0.2 – 12 mm Leadscrew diameter: 24 mm Leadscrew pitch: 6 mm Tailstock taper: MT 3 Tailstock quill stroke: 90 mm Tailstock offset from centre: 15 mm Total power requirement: 2.2 kW Machine weight approx.: 0.6 t Machine dimensions (L x W x H): 1.40 x 0.70 x 1.20 m Tedpfx Aswm Rmusgpjf - Machine from training workshop - Accessories: 3-axis digital readout, RÖHM 4-jaw chuck 140 mm diam., MULTIFIX toolpost size A M-No. 4743

Stanje: dober (rabljeno), WEILER COMMODOR Stružnica L&Z - Premer struženja 180 mm - Dolžina struženja 1000 mm - Premer vretena 56 mm - Območje vrtljajev 25-2000 obr/min - Navoj: metrični / colski itd. - Avtomatski vzdolžni / prečni pomiki - Konjiček MK 4 - Trivrata glava 250 mm - Električna zaščita za glavo - Hitromenjalni nosilec orodja Multifix z vložkom - Naprava za hlajenje Tsdow Nnvwopfx Agpof - Stena za odrezke - Dokumentacija o stroju - V dobrem delujočem stanju Dimenzije: D x Š x V: 2,5 x 1,3 x 1,7 m / Teža: 1500 kg Možne napake ali pomote v vnosu.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws Tedevrckqjpfx Agpof >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm with warranty Geometric acceptance test with inspection protocol Accessories: - 3-axis digital readout SIEMENS Tjdpfx Aev D Ip Nogpof - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard at rear - Removable chip tray - Operating manual - used, as seen -

Stanje: rabljeno, Turning length 500 mm Swing diameter over bed 297 mm Swing diameter over cross slide 160 mm Spindle bore 36.0 mm Spindle nose DIN 55022 size 5 Tailstock quill: 3 MT Quill stroke 90.0 mm Spindle speed 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement 3.3 kW Voltage 380 V Machine weight approx. 620 kg Dimensions (L-W-H) 1420 x 700 x 1200 mm From a vocational school – very good condition (!!) Regularly serviced by WEILER factory service Especially suitable for medium-sized precision turned parts Equipment: - Robust lead and feed screw lathe - KLOPFER 4-jaw chuck Ø 140 mm Tedpoxaal Dsfx Agpef - Collet chuck with many collets - Hinged chuck guard - Chuck key - MULTIFIX toolpost size A, with 3 new inserts - Sliding tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for longitudinal and cross slide - Pole-changeable drive motor - Machine base with cabinet door (storage area) - Rear splash guard - Emergency stop button, lower right - Machine leveling feet

Stanje: zelo dobro (rabljeno), Swing diameter over bed: 280 mm Swing diameter over cross slide: 160 mm Turning length: 500 mm Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42 - 2000 rpm Tedowlvi Sepfx Agpef Spindle nose: DIN 55022 Size 5 Feed range: 0.019 - 0.912 mm/rev Thread pitch - metric: 0.25 - 12 mm Tailstock quill stroke: 90 mm Tailstock taper: MT 3 Leadscrew diameter: 24 mm Total power requirement: 3 kW Machine weight approx.: 0.7 t Machine dimensions L x W x H: 1.48 x 0.69 x 1.46 m - Machine from training workshop - Accessories: 3-axis HEIDENHAIN digital readout, RÖHM 3-jaw chuck 160 mm ø, MULTIFIX toolpost Size A Machine No. 1749

Stanje: zelo dobro (rabljeno), WEILER CONDOR v popolnem originalnem stanju -Stroj iz izobraževalne ustanove -Vodila kot "NOVA" -Triosni digitalni prikazovalnik "Nov" -Trizelistna vpenjalna glava 200 mm "Nova" -Naprava za vpenjalne tule z vključenim kompletom vpenjalnih tulcev "NOVA" -Multifix z vložki "Nov" -Električna zaščita glave -Štirizelistna vpenjalna glava -Končna konica + vrtalna glava -Dokumentacija -Originalen lak -Premer struženja 330 mm -Premer struženja nad suportom 170 mm -Dolžina struženja 800 mm Tsdpfsw Iv U Ssx Agpof -Vrtina vretena 38 mm -Število vrtljajev vretena 24-2800 min⁻¹ -Avtomatski vzdolžni / prečni pomiki -Konus konjička MK 3 -Delovna svetilka -Nujna zaustavitev / izklop Mere: D x Š x V 1,9 x 0,9 x 1,6 metra / Teža 850 kg Pridržujemo si pravico do napak / tipkarskih napak

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard Tsdpfx Aevrcqdsgpef >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Universal lead and feed screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light grey Machine no.: 90-160-2054 Centre height: 160 mm Tedpfjhy Tdysx Agpef Centre distance: 650 mm Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant device - Electrically interlocked chuck guard - Quick-change tool post, size A - Simple bed stop - Chip guard rear panel - Operating manual With warranty Used, as seen The machine is technically compliant with the state of the art at the time of manufacture.

Stanje: potreben popravila (rabljeno), Turning length 1000 mm Swing diameter over bed 380 mm Swing diameter over cross slide 190 mm Spindle speed range 25 - 2000 rpm Number of spindle speeds 18 Spindle bore Ø 56.0 mm Tailstock quill taper MK DIN 228 / MK 4 Tedpfx Aow U U Uqjgpjf Quill stroke 150 mm Bed width 310 mm Spindle mount DIN 55027 / 6 Longitudinal feeds 0.022 - 0.8 mm/rev Cross feeds 0.011 - 0.4 mm/rev Thread cutting metric 0.3 - 10.0 mm Operating voltage 380 V Total power requirement 7.5 kW Machine weight approx. 1600 kg Basic functions available Machine has various leaks Sold as is at a special price! Lathe with precision-ground and induction-hardened bed. Very well suited, e.g., for use in workshops and training centers. - Machine video - ?v=zCGu4i6V5dM Equipment: - robust lead-screw and feed-screw lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX tool post - size B - with 3 inserts - movable tailstock, including quick-action drill chuck - swarf guard rear panel - front emergency stop button - adjustable bed stop - coolant device including coolant tray - operating manual (PDF)

Stanje: dober (rabljeno), Lead and feed screw lathe WEILER CONDOR from educational institution Tsdpfxowm I E Is Agpjf - Original paint - Centre height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 170 mm - Turning length: 800 mm - Spindle speeds: 24–2800 rpm - Automatic longitudinal and cross feeds - Spindle bore: 38 mm - Tailstock: MT3 - Collet chuck system incl. 17 collets - 3-jaw chuck - Multifix quick-change toolpost with inserts - Electric chuck guard - Chip guard at rear - Work lamp - Documentation - Various accessories Dimensions: LxWxH: 1.9 x 0.9 x 1.6 meters / Weight: 800 kg Subject to errors and input mistakes

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 >> Center Height: 120 mm >> Distance Between Centers: 430 mm >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock Morse Taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Tedpfsv Tyzcex Agpef Digital readout available at additional cost.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1974, Universal lead and feed screw lathe Make: WEILER Model: Commodor Year of manufacture: 1974 – overhauled Newly painted RAL 7035 light grey Machine No.: 0068 Tsdpfxjmgadde Agpef Centre height: 180 mm Distance between centres: 1000 mm Spindle bore: 56 mm With warranty Geometric acceptance with test protocol Accessories: - New FAGOR Innova 30i-T 3-axis digital readout - Chuck guard with electrical interlock - Quick-change tool post, size B - Simple bed stop - Coolant system - Operating manual - Used, as seen -

Stanje: dober (rabljeno), WEILER Praktikant 800R / Conventional Centre Lathe - Swing over bed: 300 mm - Swing over cross slide: 150 mm - Turning length: 800 mm - Spindle bore: 42 mm - Speed range: 40–2000 rpm - Automatic longitudinal/feed and cross feeds - Thread cutting: metric/inch - Tailstock Morse Taper: MK3 - Three-jaw chuck - Multifix toolpost with holders - Chuck guard - Chip guard/rear panel with work light - Chip tray - Change gears - Tool cabinet - Documentation Tsdpfxewp S Aij Agpof Dimensions: LxWxH: 1.8 x 0.8 x 1.6 meters / Weight: 750 kg Errors and omissions excepted.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.010 to 1.184 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set is incomplete) and mount Tsdpfovv Etvex Agpjf >> 1 three-jaw chuck including a set of jaws >> 1 four-jaw chuck including a set of jaws >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power on-site to verify its condition for yourself.

Stanje: novo, Lead & Screw-Cutting Lathe WEILER COMMODOR 180 GSD - New machine / Exhibition machine / Unused - 3-axis digital readout - CE marking - Center height: 180 mm - Distance between centers: 1000 mm - Bar capacity: 56 mm - Swing over bed: 380 mm - Swing over cross slide: 215 mm - Spindle speed range: 25 - 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting: Metric / Imperial / Diametral - Tailstock taper: MT4 - Tailstock quill travel: 150 mm - Coolant system - Multifix quick-change toolpost with insert - 3-jaw chuck, 200 mm - Work lamp - Chip guard (rear) - Documentation Dimensions: Tjdswucv Ropfx Agpsf LxWxH 2.4 x 1.4 x 1.7 meters / Weight: 1700 kg Subject to errors and omissions.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160B Precision Centre Lathe – 3-Axis K&C Digital Readout System (NEW) Refurbished with acceptance protocol confirming new machine tolerance levels. Tjdpfx Agsvrdlcjpsf Technical Data: >> Machine Number: 87 160 760 >> Centre Height: 160 mm >> Distance Between Centres: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feed Rates: 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake, switchable >> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories & Equipment: >> 3-axis K&C digital readout system (new), including 12-month manufacturer's warranty and operating manual Functions: mm/inch switching, coordinate mode ABS/INC, value halving, reference mark, tool memory for up to 200 tools, taper calculation, radius/diameter display, instant zero reset, and count direction switching >> New collet system, collets NEW from 3 to 25 mm in 1 mm increments >> Three-jaw chuck 160 mm, new, with 2 sets of jaws >> Multifix size A toolpost system with 3 tool holders >> Electronic spindle protection >> New LED machine lamp >> New machine mounts >> Splash guard >> Operating manual, spare parts list (PDF) About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe meeting toolroom precision, in fully overhauled geometric condition. Refurbished, with acceptance protocol confirming new machine tolerance specification. For operator safety: electronic spindle protection, covered lead and feed screws, 2 emergency stops, and a braking motor. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-quality surface finishes. You are welcome to inspect the machine under power onsite and verify its condition firsthand.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock Todpfxowrm Dte Agpof >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.