Weiler Lz 300 nakup rabljenega (198)

Stanje: dober (rabljeno), Leto izdelave: 2007, Ciklični CNC stružnica Tip stroja: Weiler E 120 x 3.000 Krmilnik: Weiler D3 Leto izdelave: 2007 Delovne ure: ca. 41.000 h TEHNIČNI PODATKI Maks. dolžina struženja: 3.000 mm Premer struženja: 830 mm Gjdpjzizd Tjfx Amfobt Maks. premer struženja nad posteljo: 1.200 mm Širina postelje: 600 mm Vreteno izvrtina: 165 mm Vretena glava DIN55027 št. 15 Vpenjalna glava: Forkardt 3KS 800 mm Območje vrtljajev: 1 - 280 / 4 - 900 min⁻¹ Št. prenosnih stopenj: 2 Navor: 8.000 Nm Število revolverjev: 1 Sauter 4-pozicijski revolverska glava za vpenjala 140 mm Kontra-vpenjalna konica Premer pinole: 140 mm Hod pinole: 400 mm Oprema/Lastnosti Elektronski ročni obroč Hidravlična vpenjalna glava Forkardt 3KS 800 mm Transporter za odrezke

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from Heidenhain ND 780, from a training workshop!! Technical specifications: - Machine No.: 7702, Year of manufacture: approx. 1990 - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock: Morse taper 3 - Feed rates: 0.012 to 0.9 mm/rev - Thread types: Metric, Inch, Module, and Diametral Pitch - Metric pitch range: 0.25 to 12 mm - Brake motor - Weight: approx. 700 kg - Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Quick-clamping system for internal and external collets (see photo) - 1 piece three-jaw chuck, 3 sets of jaws - Multifix size A with 3 tool holders - Spindle guard - 1 piece bed stop - Change gears - Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. Naturally, the machine is fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of this Weiler was a training workshop. The machine comes equipped with comprehensive accessories. Take the opportunity to inspect the machine under power on site and see its very good condition for yourself. Gbodpfxjy T Hqcs Amfet

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Godpfx Ajwrm Dtomfobt Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki: Razdalja med konicama: cca 500 mm Višina konice nad ležiščem: 125 mm 16 obratov Stopnja 1: od 110 do 900 obr./min Gbsdpfx Amozd Urmjfot Stopnja 2: od 440 do 3600 obr./min Potrebni prostor (dolžina x širina): 1,2 x 0,6 m Ocenjena teža: cca 400 kg

Stanje: dober (rabljeno), Leto izdelave: 1997, Največja razdalja med konicama 950 mm Največja višina med konicama 200 mm Premer obročnega gibanja nad strojno mizo 410 mm Premer obročnega gibanja nad podporo 200 mm Širina strojne mize 330 mm Gbjdpfx Amozxqvkjfot Celoten območje vrtljajev 1 – 3000 vrt/min Dokumentacija je na voljo (glejte slike).

Stanje: rabljeno, Leto izdelave: 2003, Stružnica, upravljana s cikličnim programom Proizvajalec: Weiler Tip: E50 Letnik: 2003 Nadzorni sistem: Weiler, ciklično upravljanje D2 Gsdpfjzt S A Usx Amfobt Delovne ure: 15.164 Razdalja med centri: 1.000 mm Višina med centri: 280 mm Največji premer vpenjalne glave: 315 mm Največji premer nad posteljo: 570 mm Največji premer nad rezkalno pripravo: 340 mm Največji premer nad vretenom: 600 mm Dolžina vretena: 140 mm Največja teža obdelovanca: 1.600 kg Premer vretena: 83 mm Vretenčna glava: velikost 8 Hitro vpenjalna glava: Parat, 4-kraka, vrtljiva Dimenzije: 2.850 x 2.280 x 1.750 mm Teža: 3.350 kg 9926

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm Gbsdpfx Asvrckqsmfst >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 200 mm, izvrtina vretena: 54 mm, premer struženja: 410 mm, širina na sredini: 950 mm, višina središča: 200 mm, največja hitrost vretena: 3.000 obr/min, skupna masa: 2.100 kg, Oprema: dokumentacija / priročnik, Dear Sir or Madam, For sale is a CNC cycle lathe of the type WEILER E35. Thanks to the Siemens 805 cycle control and the electronic handwheels, operation is very simple and extremely comfortable. The machine has been thoroughly inspected in our workshop, is fully functional, and can be tested under power at any time. We look forward to your inquiry! Our service promise to you: - We are a certified master craftsman’s business specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can completely or partially overhaul the machine of your choice - You are free to choose the color of your selected machine - Upon request, you can order additional accessories, such as tools, directly Gbjdpfsyalulox Amfjt - On request, we can also install further accessories such as safety devices for you - We are happy to arrange shipping and/or installation for you

Stanje: dober (rabljeno), 1 rabljeni stružnica z vodilnim in pogonskim vretenom Proizvajalec: Weiler Tip: Condor VS 2 Tehnični podatki: Višina konic: 160 mm Razdalja med konicama: 800 mm Premer vretenaste odprtine: 40 mm Širina postelje: 240 mm Gedow Rcrcspfx Amfebt Število vrtljajev: 12 - 2800 min-1 Pogonska moč: 3 kW Vpenjanje konjička: MK 3 Hod pinole: 110 mm Pomiki: 0,037 - 1,253 mm/obrat Teža cca 800 kg Dimenzije (ŠxGxV): cca 1930 x 880 x 1470 mm Oprema: 3-čeljustna vpenjalna glava Hitromenjalni nosilec sistema Multifix

Stanje: dober (rabljeno), Leto izdelave: 2001, Weiler DA 210 Gjdpfx Amjy Auyqjfobt Lathe Weiler DA 210 with Fagor digital readout, year 2001, in excellent original condition The machine comes from the special construction department of a renowned German mechanical engineering company. CE compliant!! Technical Data: WORKING AREA Centre height: 210 mm Swing diameter over bed: 435 mm Swing diameter over cross-slide: 245 mm Centre distance: 1,000 mm SPINDLE Spindle nose: DIN 55027/DIN ISO 702-3 size 6 Spindle bore: 52 mm Spindle-bearing diameter (front): 83 mm MAIN DRIVE Drive power 60%/100% duty cycle – / 5.5 kW Speed range: 44–2,000 rpm Number of spindle speeds: 12 FEED RANGE Number of feeds: 66 Longitudinal: 0.072–4 mm/rev Cross: 0.036–2 mm/rev THREADING RANGE Metric threads: 0.5–28 mm TAILSTOCK Quill diameter: 65 mm Quill stroke: 120 mm Internal taper: DIN 228 MK 4 ACCEPTANCE ACCURACY: DIN 8605 About the machine: HIGHEST PRECISION, EASY OPERATION AND SOPHISTICATED TECHNOLOGY are the advantages of the conventional Weiler DA series. For sale is a Weiler DA 210 lathe with Fagor digital readout, year 2001. This lathe is in very good original condition. It comes from a facility where it was only rarely used for special construction. The control is very easy to operate. The guides are lubricated regularly by the central lubrication system. The Weiler DA 210 has been mechanically and electrically tested by us. Take the opportunity to view and test the Weiler DA 210 under power on-site. Further lathes from renowned manufacturers can be found on our website.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Gbodpfsvrcqdjx Amfjt Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 140 mm, širina na sredini: 500 mm, največja hitrost vretena: 4.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Dear Sir or Madam, For sale is a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and its fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone a comprehensive inspection in our workshop and is in excellent geometrical, technical, and visual condition. All guides are in good order, the gearboxes run smoothly and quietly, and the levers shift easily. We would be pleased to invite you to test the Primus VC on site at our facility. We look forward to your inquiry! Availability: immediate Centre height: 140 mm Gsdpsyalurjfx Amfebt Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: engageable Voltage: 400V Dimensions: approx. 1.50 x 1.00 x 1.50 m (LxHxW) Weight: approx. 700 kg Further equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more available on request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are at least workshop-tested - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, the chosen machine can be repainted in your desired colour - On request, you can order additional accessories such as tools directly - On request, we can fit further accessories such as safety devices - We are happy to arrange shipment and/or on-site installation for you

Stanje: novo, Leto izdelave: 2025, Praktikant GSD One of the best-selling and most popular conventional precision lathes stands out due to: advanced engineering highest precision durability ergonomics proven in daily practice minimal space requirements and a wide range of accessories. Proven for decades in single-part and small-batch production, across trade and industry, for training and further education, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed shaft cover Main spindle brake Toolroom accuracy according to DIN 8605 Pole-changeable brake motor Headstock gearbox 16 fixed spindle speed steps Digital position readout (optional) LED machine light TECHNICAL DATA: WORKING AREA Centre height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Gbodpfx Aowhzcpsmfst Centre distance 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter at front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 TEST ACCURACY DIN 8605 * Whitworth threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only possible using additional change gears. The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For details on equipment and configuration, please contact us.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Universal lead and feed screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light grey Machine no.: 90-160-2054 Gsdpfehy Tdyjx Amfsbt Centre height: 160 mm Centre distance: 650 mm Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant device - Electrically interlocked chuck guard - Quick-change tool post, size A - Simple bed stop - Chip guard rear panel - Operating manual With warranty Used, as seen The machine is technically compliant with the state of the art at the time of manufacture.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by Elesta from Training Workshop!! Technical Data: Gbedpfxey Tmkve Amfst >> Machine No. 88-8115, Year of manufacture: 1988 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by Elesta >> Quick-clamping device for internal and external collets (see photo) >> 1 pc. 3-jaw chuck, 1 set of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc. bed stop >> Change gears >> Travelling steady >> Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler runs smoothly even at high speeds. The original location was a training workshop. The lathe is equipped with extensive accessories. You are welcome to inspect and test the machine under power on site to convince yourself of its excellent condition.

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, CNC stružnica Weiler DZ 26 Gsdjztl Haopfx Amfebt Stroj je deloval samo v olju! Letnik izdelave: 1996 Nadzorni sistem: Sinumerik Opremljena z orodji z vgrajenim pogonom in avtomatskim podajalnikom palic FMB. Dodatni podatki bodo sledili.

Stanje: rabljeno, Leto izdelave: 2001, Stružnica s cikličnim nadzorom Proizvajalec: Weiler Tip: E70 Letnik izdelave: 2001 Nadzor: Weiler, ciklični nadzor D2 Delovnih ur: 68.950 Razdalja med centri: 2000 mm Višina med centri: 360 mm Maks. premer vpenjalne glave: 400 mm Maks. premer nad posteljo: 720 mm Maks. premer nad podolžno sledjo: 430 mm Godpfxezt S Tto Amfjbt Maks. premer nad odklonom: 780 mm Dolžina odklona: 160 mm Maks. teža obdelovanca: 3.800 kg Premer vretena: 106 mm Glava vretena: velikost 11 Hitra vpenjalna glava: Parat, 4-delni revolver Dimenzije: 4.030 x 2.443 x 1.900 mm Teža: 5.200 kg 9926ä

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 160 mm, širina na sredini: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a brand new 3-axis digital readout from K+C (including 12 months manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop to ensure it is in excellent technical and visual condition. All guides are in good order, the gearboxes run quietly, and all levers engage smoothly. You are welcome to inspect the machine and verify its condition in person at our premises. Availability: on request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill travel: 85 mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions (LxHxW): approx. 1.58 x 0.9 x 1.5 m Weight: approx. 720 kg Additional equipment and accessories: New 3-axis digital readout, coolant system, chuck guard, leadscrew and feedshaft cover, 2x emergency stop, operating manual, and more upon request... Our service promise to you: - We are a certified master workshop specialising in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can partially or fully overhaul the machine of your choice - Upon request, we can repaint the machine in your desired colour - Upon request, you can order additional accessories such as tooling directly Gjdowhzdmepfx Amfebt - Upon request, we can install extra accessories, such as safety equipment - We are happy to arrange shipping and/or installation for you

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160B Precision Centre Lathe – 3-Axis K&C Digital Readout System (NEW) Refurbished with acceptance protocol confirming new machine tolerance levels. Technical Data: >> Machine Number: 87 160 760 >> Centre Height: 160 mm >> Distance Between Centres: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feed Rates: 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake, switchable >> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories & Equipment: >> 3-axis K&C digital readout system (new), including 12-month manufacturer's warranty and operating manual Functions: mm/inch switching, coordinate mode ABS/INC, value halving, reference mark, tool memory for up to 200 tools, taper calculation, radius/diameter display, instant zero reset, and count direction switching >> New collet system, collets NEW from 3 to 25 mm in 1 mm increments >> Three-jaw chuck 160 mm, new, with 2 sets of jaws >> Multifix size A toolpost system with 3 tool holders >> Electronic spindle protection >> New LED machine lamp >> New machine mounts >> Splash guard >> Operating manual, spare parts list (PDF) About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe meeting toolroom precision, in fully overhauled geometric condition. Refurbished, with acceptance protocol confirming new machine tolerance specification. For operator safety: electronic spindle protection, covered lead and feed screws, 2 emergency stops, and a braking motor. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-quality surface finishes. You are welcome to inspect the machine under power onsite and verify its condition firsthand. Gedovrdlcspfx Amfsbt

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Universal lead and feed screw lathe Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted, RAL 7035 light grey Machine no.: 1401 with warranty Includes: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip backsplash - Operating manual -Used, as seen- Gbjdpfx Amsg R S Rcsfot

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C NEW in Special Light Grey Paint! Technical Data: >> Machine No.: 92-028, Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg Gsdpfx Aeyyb T Ssmfebt >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of count switching, >> 1 pc. 3-jaw chuck, 1 set of jaws >> 1 pc. 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is of course fully functional and has been newly painted in light grey. A very fine machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and fitted with cover strips to protect them from dirt. All slides move smoothly and evenly. Take the opportunity to view the machine under power on site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feedscrew Lathe with Brand New K&C 3-Axis Digital Readout in Special Light Grey Paint Finish!!! Technical Data: >> Machine No. 92-029, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds: 0.012 to 0.9 mm/rev >> Thread Cutting Capabilities: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitch: 0.25 to 12 mm >> Weight: approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Features: >> K&C 3-Axis Digital Readout – Brand New, 12 months manufacturer's warranty; user manual included Functions: Metric/inch switch, coordinate selection ABS/INC, value halving function, reference mark setting, tool memory for 200 tools, taper calculation, radius/diameter mode, quick zeroing, count direction toggle >> 1 Three-jaw chuck, 1 set of jaws >> 1 Four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A quick-change tool post with 2 holders >> Motor brake >> Bed stop Gedpfx Asyylqhemfobt About the Machine: For sale is a Weiler Matador VS-2 in excellent condition. The machine is, of course, fully operational and has been newly repainted in light grey. This lathe is in very good condition. The K&C 3-axis digital readout has been retrofitted. All scales are brand new and fitted with protective covers to safeguard them against dirt. All slides move smoothly and uniformly. Take the opportunity to view the machine under power onsite and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Leadscrew and Feedshaft Lathe with New K&C 3-Axis Digital Readout, Special Light Grey Finish!!! Technical Data: >> Machine No. 92-027, Year of manufacture 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Speed range: 15 – 3550 rpm >> Spindle bore: 36 mm Gbodpsyylq Uofx Amfst >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> New 3-axis K&C digital readout, 12-month manufacturer's warranty, supplied with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction toggle >> 1 x 3-jaw chuck, 1 set of jaws >> 1 x 4-jaw chuck, 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The lathe is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis K&C digital readout has been retrofitted. All scales are brand new and equipped with protective covers against dirt. All slides move smoothly and evenly. Take the opportunity to view and test the machine under power on site to verify its condition for yourself.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, For sale: WEILER lathe, model Primus LZ-GS The machine is in excellent condition. Technical specifications: Year of manufacture: 1989 Godpfeihig Iex Amfsbt Machine no.: 4443 Operating voltage: 380 V Centre height: 120 mm Centre distance: 430 mm Spindle speed: 60 - 3,000 rpm with 18 geared steps Spindle bore: 23 mm Short taper spindle nose, DIN 55027 Tailstock: MT 2 Feeds: 0.03 to 0.15 mm/rev Threads possible: metric, imperial, module, and diametral-pitch Metric thread pitches: 0.25 to 2.5 mm Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Prices are subject to VAT. Inspections are possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Stanje: novo, Praktikant VCD One of the best-selling and most popular conventional precision lathes Stands out for: Advanced engineering Maximum precision Durability Ergonomic design proven in practice Minimal space requirement and a wide range of accessories. Proven over decades in single-part and small-batch production, in crafts and industry, vocational training and further education, tool and fixture construction. Equipment: Gbodpfxetznaro Amfjt Centre distance: 650 mm Centre height: 160 mm Automatic disengagement of handwheel Lead and feed screw guard Retention brake Toolmaker’s accuracy in accordance with DIN 8605 Infinitely variable speed control with maintenance-free three-phase asynchronous motor Frequency converter with actual value feedback, speed regulated Speed can be precisely and continuously optimized during machining Optimal cutting conditions for finest surfaces in the shortest time The digital position display (option) offers great operating comfort for work with constant cutting speed, freely selectable speed limit, oriented main spindle stop LED machine light Technical data: WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Centre distance: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 6 kW Speed range: 30–4,000 (5,000) rpm Number of speed steps: stepless FEED RANGE Number: 24 Longitudinal: 0.02–0.63 mm/rev Cross: 0.006–0.2 mm/rev THREAD CUTTING RANGE Metric threads: 0.25–8* mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Internal taper DIN 228: MK 3 Equipped with: - Quick-change tool post Multi-Suiss size B - Coolant system, 18 litres incl. coolant pump The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. For details on equipment, please contact us.