Vode Utorno Rezkanje nakup rabljenega (4.209)

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Stružno-rezkalni center s protivretencem z 10 CNC osmi (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Krmilnik: FANUC 31:iA Iodsxphk Tspfx Ah Doih Glavno vreteno Moč vretena: 15/11 kW Premer palice: 51 mm Vrtljaji vretena: 5.000 min⁻¹ Protivreteno Moč vretena: 11/7,5 kW Premer palice: 51 mm Vrtljaji vretena: 5.000 min⁻¹ Stružno-rezkalno vreteno Moč: 7,5/3,7 kW Vrtljaji: 12.000 min⁻¹ Maks. dolžina struženja spodnje revolverske glave: 1.005 mm Hodi suportov X1/X2/Z1/Z2/B2: 455 / 222,5 / 1.090 / 1.005 / 1.008 mm Hodi suportov Y1/Y2: ±70 / ±50 mm Zasuk osi B1: ±95 ° Linearni regalni magazin z vključenim podporno-robotom CNC podajalna luneta Hladilni ciklonski filtrirni sistem z 2 črpalkama hladilne tekočine Olajni hladilnik vretena

Stanje: zelo dobro (rabljeno), Leto izdelave: 1967, obratovalne ure: 11.240 h, Zelo malo uporabljen, Ijdpfxexnlvdo Ah Deih Upravljanje: konvencionalno, Mazivo: rezalno olje, Razni dodatki: valjčni rezkarji HDT & GT, Vpenjala itd.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106840-11, skupna masa: 35.000 kg, The drilling method used by the deep hole drilling machine is single-lip drilling. The BW250-T is a deep hole drilling and milling center featuring two separate spindles for deep hole drilling and milling operations. The machining units are equipped with a shared additional travel axis, allowing even small workpieces to be machined from four sides on the clamping table without repositioning. Drilling and Milling Unit Information: - Number of spindles: 1 drilling and 1 milling spindle - Spindle speed, infinitely variable: 0 – 5,000 rpm - Spindle drive power: 17 kW at 100% duty cycle S1 operation - Torque: 260 Nm at 100% S1 operation - Maximum drilling depth: 1,500 mm (in a single pass without interruption) Iodpjxmh Erofx Ah Doih - Drilling diameter: 4 – 40 mm based on ST 60 Travel distances: - X-axis travel: 2,500 mm - Y-axis travel: 1,500 mm - Z-axis travel: 850 mm - V-axis travel: 1,000 mm Traverse speeds: - X-axis speed: 10,000 mm/min - Y-axis speed: 10,000 mm/min - Z-axis speed: 6,000 mm/min Swivel axis system for the drilling and milling unit: - The drilling and milling unit features a horizontal swivel range of -25° / +15° - 3x steady rests for tools Fluid system information: - Coolant supply: deep hole drilling oil - Tank capacity: 2,400 liters - 1x hinged belt chip conveyor - 1x hydraulic and pneumatic power unit/equipment - 1x central lubrication system - 1x low-pressure pump: Pump delivery rate: 100 l/min Pump drive: 5.5 kW - 1x compact belt filter: Filtration capacity: 175 l/min For machining: steel / non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 – 120 l/min Pump drive: 11 kW - 1x oil mist extraction system, Extraction capacity: 2,400 m³/h Tool magazine for conventional tools, including: - Automatic tool changer with intermediate gripper - Tool holder interface: HSK 63 - Max. permissible tool diameter: 127 mm - Max. permissible tool length: 400 mm - Tool storage capacity: 40 positions Clamping table with X-axis and NC rotary table: - Length / width: 1,600 x 2,000 mm - Payload (centrically): 15 t - Swing diameter for workpieces: 2,800 mm Measuring systems - Tool breakage monitoring and length measurement for BCM tools, with automatic compensation in the control system Electrical equipment information: - 1x CNC control system TNC 640 Failsafe Heidenhain - 1x drilling process monitoring - 1x remote maintenance - 1x dynamic collision monitoring - 1x hand-held control unit Connection data: - Operating voltage: 3AC 400V ± 10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 65 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, hitrost podajanja osi Y: 816 m/min, delovna širina: 180 mm, višina skobljanja: 180 mm, premer vretena: 40 mm, skupna dolžina: 3.000 mm, največja hitrost vretena: 6.000 obr/min, Four-side planer, manufacturer: TOS Iijdsuyvnpspfx Ah Doh

Leto izdelave: 1970, Stanje: pripravljen za uporabo (rabljen), Premer kolesa: 160 mm, največja širina kolesa: 355 mm, modulno območje: 0,5-4,5, največji premer rezkarja: 115 mm, največja dolžina rezkarja: 105 mm, območje zasuka rezkalne glave: 120°, hitrost: 400 vrt/min, razdalja med konicami: 410 mm. Dimenzije stroja X/Y/Z: pribl. 2000 mm/1500 mm/2000 mm, teža: pribl. 3500 kg. Ogled na lokaciji je možen. Ijdpfx Ajxph Skjh Doih

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.185 mm, premer struženja: 640 mm, največja hitrost vretena: 4.000 obr/min, premer struženja nad ležiščem sani: 640 mm, navor nasprotnega vretena (maks.): 5.000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between spindle heads: 1,500 mm SLIDE I X-axis travel: 550 mm Y-axis travel: 180 mm Z-axis travel: 1,185 mm B-axis: 240° X-axis feed rate: 0 - 40,000 mm/min Y-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 70,000 mm/min B-axis feed rate: 1 - 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool holder: HSK 63 Milling spindle speed: 10 - 12,000 rpm Drive power 100% DC: 13.20 kW Drive power 40% DC: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 vacant stations: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-axis travel: 180 mm Z-axis travel: 1,050 mm X-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Powered tools - number: 12 Speed: 1 - 4,000 rpm Drive power 100% DC: 10.70 kW Torque S1: 32 Nm SLIDE III Z-axis travel: 1,150 mm Z-axis feed rate: 1 - 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive power 100% DC: 36.00 kW Drive power 40% DC: 45.00 kW Torque at 40% / 100% DC: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive power 100% DC: 21.00 kW Drive power 40% DC: 28.00 kW Torque at 40% / 100% DC: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Iijdpfx Ahsxf A Ede Djh Total connected load: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Space requirement: approx. 8.50 x 4.50 x H3.10 m Control CNC control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG-Automation WH10top Main spindle ISM90: through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Part extraction unit with integrated conveyor belt Automatic safety guard Differential pressure clamping With coolant pump frame: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck incl. collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 piece workpiece gripper for turret

Stanje: rabljeno, Leto izdelave: 1986, Rabljeni stroj Iedpfoxllxaox Ah Doih Leto izdelave: 1986 Oprema in tehnični podatki: Motor: 4 kW Hitrosti: 3000 / 4500 / 6000 / 8000 / 10000 obr/min Nastavitev višine vretena preko ročnega kolesa Mere postavitve: 1200x80x1350 mm Nastavljalni čeljusti iz lesa Vključno z Holz Her 3-valjnim podajalnikom, vključno s stojalom s podvozjem Mere: sledijo Teža: sledi Razpoložljivost: kratkoročno Lokacija: Flörsheim

Stanje: pripravljen za uporabo (rabljen), Deckel FP 1 Milling Machine Travel distance X-axis: 300 mm Travel distance Y-axis: 160 mm Travel distance Z-axis: 340 mm Spindle taper: SK 40 with drawbar thread Feed X-axis: 290 mm Weight: approx. 940 kg (with pallet) Space requirement: 1300 mm x 1200 mm x 1800 mm (L x W x H) Dimensions with pallet: 1400 mm x 1400 mm x 2000 mm (L x W x H) You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Isdpfx Aheuvih Ho Deih Subject to prior sale. Visit our shop and check out our other offers as well. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the item description can occur and are reserved.

Stanje: rabljeno, Leto izdelave: 1994, CNC mostna rezkalna stroj Proizvajalec: Zayer Tip: LFU 3000 Leto izdelave: 1994 Krmiljenje: HEIDENHAIN TNC415 Pomiki X/Y/Z: 2.700 x 1.200 x 1.000 mm Vpenjalna površina mize: 3.000 x 1.000 mm Največja teža obdelovanca na mizi: 7 t Število in širina T-ut: 7 x 22 mm Razmak T-ut: 140 mm Vretenski stožec: ISO 50 MAS BT 50 Iijdpfx Ahsxlc Dte Djh Izmenjevalec orodja (verižni magazin) Število orodnih mest: 30 Največja teža orodja: 25 kg Območje vrtljajev: 35 – 3.000 vrt./min Območje pomikov: 30 – 5.000 mm/min Pogon glavnega vretena: DC-motor 26 kW Linearni merilni sistem za X, Y in Z os Kroglno vreteno na vseh 3 oseh elektronska kompenzacija toplotnega raztezanja za rezkalno glavo elektronsko ročno kolo HEIDENHAIN, preklopno za vse 3 osi Hidravlična in hladilna črpalka Hladilni sistem 151025

Stanje: zelo dobro (rabljeno), Stroj je v zelo dobrem stanju. Deloval je do konca, zdaj je v skladišču in ni priključen na elektriko. Stroj je 100 % kompleten. Hu3Nhjg Na voljo so transporter za dele, transporter za odrezke in podajalnik palic. Premer vretena 42 mm Podajalnik palic IRCO Vsi priročniki in dokumentacija so na voljo. Iodpovllbrefx Ah Deih

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Z dvema obdelovalnima moduloma, X-os: -50 do 725 mm, Y-os: -200 do 300/ -250 do 250 mm, hitro pomikanje X-, Y-, Z-osi: 18/12/30 m/min, krmiljenje: Siemens Sinumerik, temperaturno območje: 5-40°C, vrsta toka/frekvenca: 3 PEN/50Hz, nazivna napetost: AC 400V, krmilna napetost: DC 24V, pomožna napetost: AC 230V, priključna moč: 102 kVA, nazivni tok: 148A, nazivni tok (hiter): 148A, varovalka (počasna): 160A, dolžina: 8000 mm, širina: 3000 mm, višina: 4000 mm, teža: cca 17 t, stanje delovnih ur: cca 80.000 h. Stroj je popolnoma funkcionalen, kroglično vreteno (obtočno vreteno) Z-osi je bilo obnovljeno leta 2024, redno vzdrževan. Z dokumentacijo, razdelilno omaro, hidravličnim agregatom, filtrskimi elementi in transporterjem za ostružke. Ogled na mestu je možen. Iodpfswbuyzox Ah Deih

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 8.597 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 424 mm, premer struženja: 370 mm, Premer palice (maks.): 65 mm, premer struženja nad ležiščem sani: 370 mm, največja hitrost rezkalne vretena: 12.000 obr/min, TECHNICAL DETAILS Turning diameter: 370 mm Turning length: 424 mm Swing diameter: 370 mm X1 axis: 380 mm X2 axis: 155 mm Z1 axis: 460 + 155 mm Z2 axis: 610 mm y-axis: ±105 mm B-axis: ±120° Bar capacity: 65 mm Spindle 1 Maximum speed: 6,000 rpm Number of speed ranges: 2 (winding change) Spindle nose: JIS A2-5 Spindle bore: 61 mm C-axis resolution: 0.0001° Front bearing spindle diameter: 100 mm Max. torque (40% DC/continuous operation): 223/158 Nm Spindle 2 Maximum speed: 6,000 rpm Number of speed ranges: 1 Spindle nose: 80 g6 flat nose Spindle bore: 38 mm C-axis resolution: 0.0001° Front bearing spindle diameter: 70 mm Max. torque (15% DC/continuous operation): 49/22 Nm Tool spindle Number of tool stations: 1 Tool shank type: C5 Front bearing spindle diameter: 65 mm Tool change time (tool to tool): 1.2 s Max. tool diameter with adjacent stations occupied: 70 mm Max. tool diameter with adjacent stations empty: 130 mm Max. tool length: 250 mm Max. tool length (over 70 mm): 210 mm Max. tool weight: 5 kg Minimum indexing of B-axis: 0.0001° Max. spindle speed: 12,000 rpm Max. torque (15% DC/continuous operation): 49/22 Nm Turret 2 Number of tool stations: 10 Max. shank diameter for boring bars: max. 32 mm Feed drives Rapid traverse speed X-axis tool spindle: 40,000 mm/min Rapid traverse speed Y-axis tool spindle: 40,000 mm/min Rapid traverse speed Z1-axis tool spindle: 50,000 mm/min Rapid traverse speed X2-axis lower turret: 30,000 mm/min Rapid traverse speed Z2-axis lower turret: 30,000 mm/min Rapid traverse speed A-axis workpiece unloading unit: 36,000 mm/min Rapid traverse speed B-axis: 100 min⁻¹ Rapid traverse speed C-axis: 250 min⁻¹ Tool magazine Iiodpoxf A Apefx Ah Doh Tool magazine: chain magazine, 76 positions Control Control: MSX-711-IV Mori Seiki Control system: MAPPS MACHINE DETAILS Power on hours: 75,992 h Total power requirement: 45 kW Weight and dimensions Machine weight: approx. 10.5 t Space requirements: approx. 2.71 × 2.43 × 2.40 m Operating Hours Head 1 Operating time: 48,606 h Machining time: 8,597 h Operating Hours Head 2: Operating time: 48,382 h Machining time: 2,664 h EQUIPMENT Renishaw HPRA Blum Laser Control Direct measuring system X, Y, Z, B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll belt filter KF10/500 / high-pressure coolant through milling spindle, 7-stage, up to 70 bar Chip conveyor ConSep 2000

Stanje: rabljeno, Leto izdelave: 2019, maks. nihajni premer 695 mm maks. premer obdelave 340 mm maks. dolžina struženja 500 mm premer vretena 76 mm krmiljenje MAZAK SmoothC maks. hitrost vretena 5.000 obr/min izmenjevalec orodja 12 postaj Iisdpfx Ajxnqzlsh Doh pogon orodij hitrost 4.500 obr/min CNC stružno-rezkalni center | MAZAK - QT-Compact 200MY L opremljen z osjo C + Y, 12-postajnim revolverjem za pogonska orodja, konjičkom, transporterjem ostružkov, avtomatizacijskim paketom ter LTA zračnim filtrom Stroj je v dobrem stanju in ga je možno videti pod napetostjo. Dodatne tehnične podatke najdete v priloženi ponudbi.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1967, obratovalne ure: 11.240 h, Upravljanje: konvencionalno, Iiodexnbg Eopfx Ah Deh Mazivo: rezalno olje, Razni dodatki: odvalni rezkarji HDT & GT, Vpenjala ipd.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Stroj si je možno ogledati pod napetostjo. Isdpoxmttnofx Ah Dsih

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Podatki Fanuc 32i B Vpenjalna glava: 250 mm / 170 mm Prehod: 65 mm Os Y: 120 mm Revolver: 20 pozicij Iisdpfx Aoxmid Neh Deh Merjenje orodja Lovilec kosov Transporter za ostružke

Stanje: dober (rabljeno), Leto izdelave: 2008, V dobrem tehničnem stanju in popolnoma delujoč. Leto izdelave: 2008. Dodatna Y-os: +-60 mm Iijdpfexdcigex Ah Dsh Največja hitrost vretena: 3.000 min-1 Moč vretenskega motorja: 22/18,5 kW Največja hitrost pogonskih orodij: 6.000 min-1 - Vpenjalna glava 300 mm s prehodom 90 mm, vretenjak A2-8 - Povečana moč in navor 25/30 kW, 1.000/1.300 Nm - Premer struženja 420-500 mm - Dolžina struženja 1.250 mm - C-os, pogonska orodja - NC-konjiček, popolnoma programirljiv, ločen motor - Povečana moč Z-osi - Nov transporter za odrezke

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Naprava za ledenu vodu za hladnu vodu VRHUNSKI model: L 100 Preporučena veličina serije do: 30 litara Stalna snaga * (hladna snaga): 60 litara Vrhunska rashladna snaga * sa ledenom bankom: 180 litara/h Ledena banka: 20 kg Napon: 230V; 50Hz Snaga: 575W Priključak za vodu: 1/2" Protok vode pri 2 bara: 8 litara/min Dimenzije uređaja D x Š x V mm: 950 x 530 x 560 Težina prazna / u radu cca: 60kg / 130kg Potrošnja energije na 100 litara: 1-2 kWh NOV uređaj sa garancijom + servisom *pri +17,5°C ulaza i +2,5°C izlaza. Tehničke izmene su moguće. Opcije: Leasing i usluga najma Donji postolje Usluga dostave Iodpjfmcikjfx Ah Djih Ugovor o održavanju Posetite našu veliku izložbu pekarskih mašina!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2022, obratovalne ure: 22.323 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9407180, Manufacturer: Huron Grafenstaden S.A. Model: EX-C Serial No.: 9407180 Year of Manufacture: 1995 Retrofit: 2017, 2021, and 2022 General Description We offer a Huron EX-C CNC milling machine – a robust and versatile solution for precision machining. In 2017, a comprehensive retrofit was performed (complete renewal of CNC control, control cabinet, drives, motors, Siemens 840D Solution Line). In 2022, a new cooling unit from Schimpke was installed. The EX-C is equipped with a C-axis and rotary table, enabling flexible machining of complex geometries. In 2021, machine geometry was further improved with new guides, guide carriages, and scrapers on X/Y/Z axes. Circular interpolation and close-tolerance surface machining remain precise and reliable. Travel X-axis (longitudinal travel): 2,400 mm Y-axis (cross travel): 700 mm Z-axis (vertical travel): 600 mm Spindle Taper: ISO 40 Tool clamping force: 12,000 N Max. power: 25 kW Spindle speed: 100 – 14,000 rpm Max. torque: 256 Nm Nominal speed: 1,000 rpm Isdpfjxg Il Ejx Ah Dsih Head Type: C working axis Axis B: ±100° Measuring increment axis B: 0.001° Fixed Table Usable area: 1,200 × 600 mm T-slots: 6 Reference groove width: 18H8 mm Other groove widths: 18H12 mm Groove spacing: 100 mm Permissible load: 1,800 daN Rotary Table Usable area: 800 × 700 mm T-slots: 7 Reference groove width: 18H8 mm Other groove widths: 18H12 mm Groove spacing: 100 mm Centering device: Ø 63H7 mm Housing height: 900 mm Permissible load: 1,500 daN Axis Movements (X-Y-Z) Rapid traverse: 30,000 mm/min Feed rate (continuous): 1 – 30,000 mm/min Nominal thrust: 1,000 daN Max. thrust: 1,300 daN Movement Axis B Rotational speed: 4.3 rpm Clamping torque: 4,500 Nm Movement Axis C Rotational speed: 10 rpm Clamping torque: 12,000 Nm Max. working torque: 1,000 Nm Automatic Tool Changer Number of tools: 32 Max. tool weight: 16 daN Max. magazine load: 160 daN Max. tool diameter: 100 mm Max. tool length: 300 mm Tool change time (tool–tool): 8 s General Data Machine weight: 20,000 kg Noise level: < 85 dBA (ISO 1999)

Stanje: dober (rabljeno), Leto izdelave: 1999, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.150 mm, skupna dolžina: 6.000 mm, skupna širina: 5.200 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 10 m/min, Proizvajalec: FOOKE Model: Endura Tip 8 Leto izdelave: 1999 Krmiljenje: Siemens 840 D Powerline Orodni držalo: HSK-A63 Iiedpfx Ahjxnktuj Dsh Maks. število vrtljajev: 16.000 X-hod: 3000 mm Y-hod: 2500 mm Z-hod: 1150 mm A-os: +/- 100 mm C-os: +/- 181,5 mm Velikost mize: 3000 mm x 2500 mm Možnost: Zunanji pihalni zrak Kinematika: Vilicasta glava

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, CNC-vzdolžni stružni stroj Doosan Puma St20G Leto izdelave 2012 Iisdpfewtg Disx Ah Dsh Revija za palice FMB turbo 3-26 Transporter za ostružke

Stanje: rabljeno, Leto izdelave: 2001, - 3-axis position indicator - Universal milling head - Hardened and ground guideways - Infinitely variable feeds - Infinitely variable spindle speeds with 2 speed ranges - Horizontal milling attachment - Hydraulic tool clamping - 11 kW drive - Automatic central lubrication - Coolant system - Table enclosure - CE certification - incl. milling tools - incl. operating manual and documentation - Year of manufacture: 2001 - Complete service performed Technical Data Isdpfx Ajwkvlkeh Dsih Worktable: - Clamping surface: 1500 x 360 mm - Table load capacity: 800 kg Travel distances: - X-axis (longitudinal): 1000 mm - Y-axis (cross): 540 mm - Z-axis (vertical): 430 mm Working area: - Distance spindle nose/table: 50 - 480 mm - Distance spindle center/column: 350 mm Feeds: - Number of feeds: stepless - Feed (longitudinal/cross): 16 - 1200 mm/min - Feed (vertical): 8 - 450 mm/min - Rapid traverse (longitudinal/cross): 2500 mm/min - Rapid traverse (vertical): 1000 mm/min - Feed motors: 3 x 1.5 kW Main spindle: - Number of speed steps: 12 - Speed range: 40 - 1750 rpm - Speed graduations: 160, 225, 315, 440, 620, 880, 1240, 1750 - Drive power: 11 kW - Spindle taper: ISO50 DIN2080 - Milling head overhang: 420 mm Dimensions and weights: - Space requirement: 3050 x 2150 mm - Machine dimensions: 2050 x 2210 x 1830 mm - Machine weight: 2800 kg

Stanje: zelo dobro (rabljeno), Rezkalnik za zobnike LORENZ LS 400 CNC Specifikacije Proizvajalec: LORENZ Model: LS 400 Isdpfx Aexgptqsh Dsih Stanje: Rabljeno Številka zaloge: v tovarni Največji premer: 400 Modul: 7 Opis Oprema Prenovljen leta 2006 Nova električna napeljava

Stanje: zelo dobro (rabljeno), Rezkalni stroj z noži LORENZ LS 150 CNC - retrofittan leta 2005 Specifikacije Isdpoxgprgsfx Ah Deih Proizvajalec: LORENZ Model: LS 150 Leto: 2005 Stanje: Rabljeno Inventarna številka: v tovarni Največji premer: 150 mm Modul: 3 Delovni hod: 50 mm Opis SIEMENS SINUMERIK 810 D Retrofit izveden leta 2005

Stanje: zelo dobro (rabljeno), Rezkalni stroj za zobnike LIEBHERR LC 282 CNC Specifikacije Proizvajalec: LIEBHERR Model: LC 282 CNC Stanje: Rabljeno Številka zaloge: Factory Največji premer: 280 mm Število vrtljajev orodja: 1200 rpm Modul: 7 Premer mize: 250 mm Število vrtljajev mize: 100/200 min Iiedjxgpqcopfx Ah Dsh Min-max razdalja med obdelovancem in rezkarjem: 30 - 300 mm Naklon glave: 45° Največji premer rezkarja: 160 mm Teža stroja: 12.000 kg