Stroj za rezkanje v orodjarni - Universal

HERMLE UWF 851H

Stanje: rabljeno, Leto izdelave: 1996, Technical Details: X-axis travel: 600 mm y-axis travel: 450 mm z-axis travel: 400 mm Control: Heidenhain TNC 425 Spindle taper ISO: SK 40 DIN 69871 Quill stroke vertical: 75 mm Distance column to table edge: 190 mm (fixed) vertical Spindle head swivels left and right: 90° vertical spindle Distance spindle/table min./max.: 165/565 mm vertical spindle Distance spindle/table min./max.: 165/565 mm horizontal spindle Spindle speed range: 20 ... 4500 rpm Tool magazine with: 32 tools (type HTC 32) Feed rate: 1 ... 5000 mm/min Table size: 850x440 mm Swivelling table +/-: no = fixed Table load capacity: 500 kg Total power requirement: 15 kW Weight approx.: 3500 kg Machine dimensions approx. LxWxH: 2.5 x 3.0 x 2.1 m Control cabinet dimensions LxWxH: 1.6 x 0.6 x 1.7 m Equipment: Crjdpfx Apou Nc T Roljb - Coolant tank, capacity 100 litres, flow rate 16 l/min - Control panel with extension arm - Electronic handwheel - 8 machine feet

Stanje: rabljeno, Leto izdelave: 1998, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular Cedeu Sbpvjpfx Apljrb Saw band length 2965 x 27 x 0.9 mm Table height mm Band speed 37 / 76 m/min Total power requirement 1.0 kW Machine weight approx. 0.38 t Space requirements approx. 1.0 x 1.6 x 1.4 m Double mitre band saw

Stanje: rabljeno, Leto izdelave: 1996, Technical details: Crjdpfou Nc Uhex Apleb X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 400 mm Spindle taper: IBAG SKI 25 Control: Heidenhain TNC 425 Vertical quill stroke: unknown mm Speed range: 2,400 – 24,000 rpm Feed rate: 1 ... 5,000 mm/min Table clamping surface: 850 x 440 mm Table swiveling +/-: fixed ° Table load: 500 kg Tool holders / stations: 32 places for IBAG SKI 25 Approx. weight: 3,600 kg Machine dimensions approx. (L x W x H): 2.5 x 3.0 x 2.1 m Control cabinet dimensions: L: 1,550 x W: 550 x H: 1,700 mm Universal milling and drilling machine - with IBAG high-frequency spindle type HF 100A-30/24 - Milling spindle taper IBAG SKI 25 with IBAG pull stud - Coolant tank, delivery rate 16 l/min and 100 liters capacity Accessories: - 3D probe Heimer for IBAG milling spindle - Tool holders/collets IBAG, subject to availability - Electronic handwheel as per manufacturer.

Stanje: rabljeno, Leto izdelave: 1994, Swing diameter: 570 mm Turning length: 2000 mm Control: Sinumerik 805 Siemens Max. swing diameter over cross slide: 365 mm Main spindle speeds: 3–2,500 rpm Main spindle drive power: 15/19 kW Spindle bore: 62 mm Spindle nose: DIN 55027 No.8 Tailstock quill taper: MK 5 Quill stroke: 190 mm Quill diameter: 80 mm Feed range – longitudinal and cross: 0.01–50 mm/rev Total power requirement: 50 KVA Machine weight approx.: 5 t Space requirements approx.: m Includes Forkardt chuck F315 Cedpfx Aju Sbkgspljrb Includes 6 pcs. Multifix tool holders Includes 1 pc. closed steady rest Includes 1 pc. open steady rest

Stanje: dober (rabljeno), x-travel 410 mm y-travel 310 mm z-travel 400 mm Main spindle taper SK 40 Table clamping surface 700 x 280 mm Speed range 45 - 2000 rpm Quill stroke 63 mm Total power requirement 2.2 kW Machine weight approx. 1300 kg Space requirement approx. 2.1 x 2.1 x 1.7 m Voltage 400 V 3-axis digital readout Heidenhain Fixed angle table Coolant system Crodpfx Apji Elydjlsb Swivelling vertical milling head

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Cjdpfjrqwbisx Aplorb Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: novo, Welding current: 15 - 40 A Cutting capacity: 1 - 16 mm Open circuit voltage: 96 V Compressed air connection: min. 4 bar Connected load: 3.6 kW Supply voltage: 230 V Weight: 9.0 kg Dimensions (LxWxH): 371 x 153 x 232 mm Digital display. Overvoltage protection. Plasma torch. Codpfxsupxfhj Aplsrb Earth cable. Pressure reducer with moisture separator. Equipped with IGBT technology.

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 600 mm y-axis travel: 525 mm z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Credpfjtqqmhex Apljb Spindle interface: DIN 69871 Spindle speeds - stepless: 20 - 12,000 rpm Feed rates X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Max. table load: 350 kg Control: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Stanje: rabljeno, Leto izdelave: 1985, x-axis travel: 485 mm y-axis travel: 385 mm z-axis travel: 380 mm Table clamping surface: 800 x 460 mm Spindle taper: SK 40 Control: CONTOUR 1 Spindle speeds: 50 - 2500 rpm Feeds: 10 - 1000 mm/min Rapid traverse: 2 m/min Csdpfxotqqllj Apljrb Table load capacity: 600 kg Quill stroke: 80 mm Total power requirement: 7.5 kW Machine weight approx. 2.0 t Dimensions L x W x H: 2.4 x 1.7 x 1.98 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system - X/Y/Z axes can also be operated via handwheels -

Leto izdelave: 1990, stanje: novo, Brand: SKF Model: 6202-Z/QE6 Year of manufacture: Unused Weight (kg) approx.: 9,400 gross / 8,780 net Codpfjqa Am Tsx Apljrb Quantity in stock: approx. 193,200 units Manufactured in: France Comments: Contact us for minimum order quantity Terms of sale: Contact us for minimum order quantity