Center CNC za struženje in rezkanje

Gildemeister GMX 400

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Kedpfxjxmhdne Aacowu Further information available on request.

Stanje: dober (rabljeno), Leto izdelave: 2006, Technical data Ø: 400 to 1000 mm Kwsdpev Tztysfx Aacju Rectangular: 100 x 400 mm to 1000 x 1100 mm

Stanje: zelo dobro (rabljeno), Novo 2006 Brother CNC-B00 krmiljenje Kwodorfxr Ujpfx Aaceu Čas menjalca palet: 3,4 sekunde Velikost palete: 600 x 425 mm X-os: 550 mm Y-os: 400 mm Z-os: 415 mm Hitrost vretena: 12.000 min⁻¹ (rpm) 40-postajni avtomatski menjalec orodij (ATC) Vpenjalni stožec: BT30

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, številka stroja/vozila: 778 F 319, Laserski rezalni stroj Znamka: Prima Power Tip: Palatino 1530 Leto izdelave: 2012 Ksdpfx Aaomx Rrlocjwu Vključen dobavni obseg: Zračni filtrirni sistem z visokoučinkovitimi nanovlaknastimi filtri z dolgo življenjsko dobo in vodni hladilni sistem (KLIMA)

Stanje: rabljeno, Description: General: Year of manufacture: 2020 Control system: WEISS CNC Distance between centers: 6 mm Center height: 200 mm Grinding wheel dimensions: 400 x 60 mm + 0 x 60 mm Workpiece spindle head: Rotational speed: 1 rpm Max. workpiece weight: 25 kg Max. grinding diameter: 390 mm Mount: MK4 Grinding spindle head: Peripheral speed: 2 m/s Grinding wheel dimension right: 0 x 60 mm Kwjdpfsv Armcox Aacou Grinding wheel dimension left: 400 x 60 mm X-axis: 380 mm Z-axis: 1.1 mm B-axis: Torque motor, stepless Tailstock: Quill diameter: mm Quill stroke: 45 mm Mount: MK 4 Micrometer adjustment: +/- 0.04 mm Equipment / Accessories: Position measuring systems: Direct (glass scales) Grinding spindles: 2x grinding spindle (left/right) GAP / Crash Control: Structure-borne noise (Sensotronic) Balancing: MPM balancing device Workpiece measurement: Marposs PF ME Automation: Robot interface prepared Setup mode: Electronic handwheel Emulsion mist separator: Mechanical Dresser: For external grinding wheel left/right Accessories: Various grinding wheels + flanges

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 330 mm TURNING-MILLING SPINDLE - Travel X/Z: 410/400 mm - Travel Y: 200 mm - B-axis stroke: -25/+115° - Minimum B-axis resolution: 0.001° - Tool type: HSK40 - Spindle speed: 30,000 rpm - Spindle drive power: 8 kW TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 60 - Tool change time: 1.2 s - Number of positions: 60 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required space: 3,300 x 2,900 mm - Machine height: 2,100 mm - Machine weight: 5,000 kg HOURS OF OPERATION - Operating hours: 11,659 h ACCESSORIES Kwedpfx Aeuhampjacju - Control: Fanuc 31i model A5 - Direct path measuring systems - Coolant tank * with high pressure pump: 70 bar * Internal coolant supply (ICS) - Oil mist extraction: ELBARON RON/A 100 DV - Spindle cooling - Workpiece measuring probe: Renishaw OMP40-2 - Parts removal - 1 NAKANISHI spindle HTS1501S: 150,000 rpm - Fire extinguishing system * * NB: Functionality not guaranteed. Must be checked by a qualified company on behalf of the buyer. - Bar puller

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Komorna elektrostatika peč za prašno lakiranje: dolžina: 500 cm, širina: 250 cm, višina: 300 cm - Kabina za prašno lakiranje s filtrom: dolžina: 300 cm, širina: 220 cm, višina: 270 cm Kwsdpfxev Nvnde Aacsu - Elektrostatika oprema za prašno lakiranje: model: HMK MULTICOLOR, način uporabe: ročni

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) Kwsdpfsvy Ihdex Aacou - Tools upon agreement

Stanje: dober (rabljeno), Leto izdelave: 1989, obratovalne ure: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed/ways cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3,150 rpm Feed range, longitudinal and facing: 0.5 – 5,000 mm/min Rapid traverse, longitudinal + facing: 9 m/min Main drive: 30 kW Machine dimensions with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT screen General Description: CNC manual input control system with program input via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu navigation and plain text display of all functions. Control keyboard, screen, and handwheel are housed in a separate chip protection cover. The EPL control offers the following features: Programs can be entered and edited directly by the operator via the EPL control without manual program preparation. NC programs in ISO/EIA format can be entered, output, or directly input manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, facing, and contour turning, including stock allowance. Thread cutting. Undercuts as per DIN 509 Form E and F and DIN 76, grinding allowance programmable. Axial and radial grooves according to DIN 471 and 472, including bottom finishing. Radii 90° and chamfers 45°. Automatic cutter radius compensation for cycles, undercuts, grooves, radius, and chamfering. Programming: Block-oriented, metric/inch, diameter in absolute input, radius in incremental input, full circle programming, subprogram technique, skip levels for program sections. Zero offset. Operating mode selection via menu. Program input and output: Menu-guided dialogue with operator prompts or direct dialogue. • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged belt chip conveyor • 12-station VDI 40 turret, 6 standard tool stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric footswitch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Kedpfx Aovr Eh Ejacewu

Stanje: dober (rabljeno), Leto izdelave: 2005, CITIZEN K12 CNC Lathe Automatic TECHNICAL SPECIFICATIONS Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extraction length: 80 mm Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15,000 rpm Max. machining diameter of sub spindle: 12 mm Max. machining length of sub spindle: 40 mm Max. drilling diameter for back machining: 6 mm Max. thread diameter for back machining: M5 Sub spindle speed: 10,000 rpm Tool turret, number of tools: 8 Speed of driven tools: 6,000 rpm X1-axis: 122 mm Z1-axis: 200 mm Z2-axis: 150 mm Weight: 1,950 kg SCOPE OF DELIVERY Includes (list not exhaustive): Citizen K12 CNC automatic lathe Chip tray Transformer Complete operating documentation Kwodpjvrz H Rjfx Aacsu Exact scope of delivery as per photo documentation We do not accept any liability for the accuracy, completeness or timeliness of the information provided.