Minimax Fmz 5000 nakup rabljenega (13)

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: Itsdpfx Adscuwptjksd • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Digital version with motorized thickness table adjustment • Helical-toothed steel feed roller for constant and uniform material feed • Material feed with two speeds • Extra-long surfacing tables enable easy and precise planing of workpieces • Work tables are made of stress-relieved, annealed cast iron—durable, distortion-free, and highly resistant • Surfacing tables open to the rear simultaneously for minimal setup times • The high machine weight ensures maximum precision and smooth operation Isdpfx Aodvn Hwsdkotd • Powerful industrial motor • Robust steel/cast iron construction • Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller—ideal for efficient planing of precious timber Technical Data: Working width 410 mm Cutterhead diameter (mm) 95 mm Max. chip removal 5 mm Total surfacing table length 2200 mm Thickness table dimensions 410 x 775 mm Thickness table feed speed 6/12 m/min Min./max. working height thickness table 3 – 240 mm Min. working length thickness 180 mm Motor power 5.0 kW, 400V, 50 Hz Including the following options: • Motorized thickness table adjustment with digital display • Fold-down auxiliary fence for thin workpieces • TERSA cutterhead system

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Isdjc S Di Repfx Adkstd Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Itjdpjiiynnofx Adkjd Saw blade speed: 4000 rpm Sliding table and work table Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm - Professional fences - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: novo, Band saw in compliance with European safety regulations, complete with: - Reinforced grey cast iron table, tiltable - Balanced cast iron flywheels - Telescopic blade guard with rack and pinion - Blade tension indicator - Precise upper and lower blade guides - Cleaning brush on the lower flywheel - Sturdy aluminium fences - Max. saw blade width: 16 mm - Extraction below the table, mounted on the machine stand - Micro safety switches on the machine doors Work table dimensions: 600 x 520 mm Work table height: 900 mm Flywheel diameter (cast iron): 450 mm Itsdpsdibw Asfx Adkjd Flywheel speed: 700 rpm Max. cutting height: 300 mm Max. cutting width: 440 mm Min./Max. blade length: 3690 / 3742 mm Min./Max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Stanje: novo, Multi-combination machine with aluminium sliding table for sawing, milling, surface/thickness planing and optional slot mortising Torsion-resistant steel/cast iron construction Machine table made of cast iron, hardened and ground Itodoiiyppopfx Adksd Smooth-running anodised aluminium sliding table, 10-year SCM warranty on sliding table guides Large crosscut frame with extendable aluminium telescopic fence and fold-away stops With combination saw/miter fence with 45° quick adjustment Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45° Helically geared steel infeed roller for consistent wood feed during thickness planing Four spindle speeds, manually adjustable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Equipped with a proven ball contact system, used millions of times Permanently smooth operation due to hardened and ground guides Not sensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail The extraction ports for surfacing and thickness planing are on the same (right) side. The extraction hose can therefore be used from the same side for both planing modes. Helically geared steel infeed rollers for constant and uniform workpiece feed Massive anti-kickback devices for operator safety 3-knife cutter block for optimal planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of the saw blade: 1660 mm Cutting width at rip fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutter block diameter / number of knives: 72 mm / 3 pcs. Table dimensions: 300 x 450 mm Min. / max. working height: 3 mm / 220 mm Max. material removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. tool diameter retractable: 180 mm Spindle speeds: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Extraction port Ø saw blade guard: 60 mm Weight: 430 kg OPTIONS: - Professional fences: EUR 300 Saw fence with quick locking and micrometric adjustment Planer fence 90° ÷ 45°, continuously adjustable - Scoring unit incl. saw blade: EUR 292 - Handwheel with digital readout for thickness table positioning: EUR 129 - Mobility kit: EUR 119 - 2 additional handwheels for aggregate adjustment: EUR 45 - TERSA cutter block, Ø 72 mm: EUR 212 - Xylent spiral cutterhead, 3 rows of knives: EUR 717 - Aluminium slot mortising unit: EUR 390 - 2 stop flaps for crosscut fence: EUR 150

Stanje: dober (rabljeno), Koda: 0326 Blagovna znamka: SCM MINIMAX Model: CU 350 K - CE Standard Univerzalni kombinirani stroj s 7 operacijami za mizarstvo, pohištvo, izdelavo pohištva po meri, vrata, lesena okna, panele in drugo – v skladu s CE standardom Tehnični podatki: Aluminijasti pomični voziček na kaljenih in brušenih jeklenih vodilih, dolžine 3000 mm Skobeljni stroj: Širina skobljanja: 350 mm Skupna dolžina miz: 1800 mm Hitrost vretena: 4850 vrt/min Naklon vodila: 90–45° Število nožev: 3 Itedpfx Adoyuxploksd Debelinski skobeljni stroj: Dimenzije mize: 600 x 350 mm Min/max delovna višina: 3–230 mm Maksimalni odzem materiala: 5 mm Vretenski rezkar: Dolžina vretena: 136 mm Hitrost vrtenja: 1400/3500/6000/8000 vrt/min Maks. premer orodja: 180 mm Zaščitni pokrov z navpičnimi vpenjali Krožna žaga: Aluminijasti pomični voziček: 3000 mm Nagibno žagin list: 0–45° Maks. premer žaginega lista: 300 mm Hitrost vretena: 4000 vrt/min Širina reza ob vzporednem vodilu: 900 mm Precizni okvir s teleskopsko vodilnico z 2 nastavljivima referenčnima omejiloma Zaščitni pokrov Vrtalno-dlgalni stroj: Dimenzije mize: 430 x 220 mm Pritisna vpenjala za obdelovanec Vertikalni hod: 100 mm Prečni hod: 155 mm Vzdolžni hod: 115 mm Število motorjev: 3 x 3 KM diameter odsesovalnih priključkov: 120 mm Skupne dimenzije sestavljenega stroja: 3000 x 2800 x 1150 mm (V) Skupne dimenzije za transport: 3000 x 1400 x 1300 mm (V) Teža: 690 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Robna brusilka Minimax Unilev 150 Mere traku: 150 x 2170 mm Dve hitrosti traku Delovna miza nastavljiva pod kotom 0-30 stopinj Nastavljiva višina brušenja Oscilacija brusilnega traku Ijdeyqxutspfx Adkstd Moč motorja: 3,3/2,6 kW CE znak

Stanje: rabljeno, Leto izdelave: 2010, skupna dolžina: 1.900 mm, skupna širina: 1.900 mm, skupna višina: 1.250 mm, Weight: 200 kg Price: On request - Year of manufacture: 2010 - Documentation available: No - CE certificate present: No - Serial number: KK/101307 - Max. cutting height [mm]: 90 - Roller table length [mm]: 1850 - Table width [mm]: 1500 Iedpfx Ajyvf Haedkjtd - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 315 - Saw blade bore diameter [mm]: 30 - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Tilting saw unit: - └ Min. tilting angle [°]: 0 - └ Max. tilting angle [°]: 45 - Voltage [V]: 400 - Power consumption [A]: 10 - Transport dimensions: 1900mm x 1900mm x 1250mm (L x W x H) - Transport weight [kg]: 200kg - Number of transport packages [pcs.]: 1 Financial Information VAT: The stated price is exclusive of VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Stanje: dober (rabljeno), Koda: 0292 Znamka: SCM MINIMAX Model: FORMULA F1 - CE standard Skobeljni stroj za obdelavo lesa, plastike, kompozitnih materialov in drugih – CE standard Itsdeyhp S Rjpfx Adkjd Tehnični podatki: Delovna širina: 410 mm Dolžina mize: 2610 mm Število nožev: 4 Premer vretena: 120 mm Hitrost vrtenja vretena: 5000 rpm Vodilo nastavljivo od 90° do 45° Največji odvzem na prehod: 8 mm Moč motorja: 5,5 KM Višina mize od tal: 845 mm Premer priključka za odsesavanje: 120 mm Skupne dimenzije: 2610 x 900 x 1070 mm (višina) Teža: 575 kg

Stanje: novo, Leto izdelave: 2023, moč: 7 kW (9,52 KM), širina skobljanja: 520 mm, število rezil: 4, skupna masa: 483 kg, vrsta nastavitve višine: električni, premer gredi skobeljnika: 120 mm, višina skobljanja: 240 mm, SCM MiniMax s 52es Thickness Planer Iedpoqu U Dnsfx Adketd Specification: • Condition: New • Manufacturer: SCM • Planer table width: 520 mm • Planer table length: 850 mm • Minimum workpiece thickness: 3 mm • Maximum workpiece thickness: 240 mm • Maximum cutting depth: 5 mm • Motor power: 7 kW • Supply voltage: 400 V • Cutterblock: 4 conventional knives • Cutterblock diameter: 120 mm • Cutterblock speed: 5000 rpm • Maximum planing width: 520 mm • Feed speed: 5 / 8 / 12 / 18 m/min • Extraction port diameter: 120 mm • Weight (net): approx. 493 kg • Overall dimensions: 144 x 108 x 110 cm (W x L x H) Additional Information: • Factory new machine • Actual item condition shown in the pictures • Possibility to test and inspect the machine on-site • Price listed in the auction does not include VAT or transport costs • Available immediately from stock in Italy

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, working width 410 mm length of tables 2630 mm planer shaft with 4 knives motor with integrated brake horizontal boring machine drill table 250 x 570 mm Itsdpfx Ajw Ad Iqsdkjd year of manufacture 2001 power supply 380 V

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 12/1964, lastna masa: 410 kg, velikost pnevmatike: 155R13 79J, barva: rdeča, voznikova kabina: drugo, vrsta prenosa: drugo, skupna dolžina: 1.570 mm, skupna širina: 2.050 mm, Vehicle location: Bovenden, Body: TSA-8, Portable pump trailer chassis: Minimax Type: L24 Itedpjvhk Ipofx Adkod First registration: 22.12.1964 Tow bar for passenger car coupling available at an additional cost of €500 net. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale and errors excepted!