Vloge Paternoster nakup rabljenega (193)

Stanje: delavnici obnovljeno (rabljeno), Modernized machines with new LTG control system StoreControl L External dimensions: Construction height: 6,000 mm Construction width: 1,630 mm Hnjdjn D A Rrepfx Af Tsg Construction depth: 2,980 mm 30 carriers, each with 500 kg load capacity in usable clear internal dimensions: Width: 1,300 mm Depth: 863 mm Height: from 50 to 750 mm Total load capacity up to 40,000 kg Start of the operator opening at 870 mm above finished floor level, then 845 mm high Colour scheme: GREY / BLUE, carriers hot-dip galvanized (Sendzimir process) Surface cleaned, signs of use possible Performance data: Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.29 kW / 400 Volt Additional features: Manually operated lift door Subject to errors, technical modifications, detail deviations from photos Delivery & installation currently primarily in Germany, Austria, and other neighboring countries

Stanje: dober (rabljeno), Keyence XG-7501P Multi-Camera Image Processing System Controller XG7501P Manufacturer: Keyence Hsdpfx Afeib Dncs Tong Manufacturer Part Number: XG-7501P Type: Multi-Camera Image Processing System, Controller Side cover included Country of Manufacture: Japan Item condition: This item comes from the closure of operations of one of Germany’s largest automotive parts suppliers and was stored in paternoster systems. Therefore, some original packaging is missing and certain items may show signs of storage.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 532.323/20-0, skupna višina: 6.454 mm, skupna širina: 6.810 mm, skupna dolžina: 2.810 mm, nosilnost na odsek shranjevanja: 180 kg, nosilnost: 40.000 kg, Here, a set of two Hänel Lean Lifts in a connected lift system is being auctioned! Machine Numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact Model Designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load Capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total loading capacity: 40,000 kg per Lean Lift (container weight must be deducted) Access Point 1 (Front) Clear opening height: 880 mm Access point height: 890 mm (standard height) Access point floor clearance: 890 mm LED lighting: present Manual sliding door: present Light curtain: present Access Point: Optoelectronic identification system (28-fold) for precise height measurement of stored goods Drive and Travel Speeds Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift power: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift Control Control type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST connection (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in the WMS Display language: German (DE) Additional memory card: available for S-version (standalone) Module 00 - remote operation lift mode Safety equipment: special safety equipment required when remotely operated outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Unladen weight without containers per system: 4,371 kg Container unladen weight per system: 2,275 kg Electrical Data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Hnsdpfexyygusx Af Teg Minimum cable cross-section for mains connection: 2.5 mm² at 9.6 A Maximum fuse rating for mains connection: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED field for colour marking of the requested item) - Height sensor technology for automatic detection of fill height and height-optimized storage - Hänel slotted wall: 131 usable storage profiles, slotted profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for high vertical and horizontal travel speeds - ESB package: redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Leto izdelave: 2023, Stanje: novo, In the field of 3D thermoforming, we also offer presses, turners, film storage carousels, and membranes for sale on Machineseeker! RBM 1500 Features • Four-head rotary brush system • Infeed inclined roller conveyor with separation unit • Spiral brush for removal of loose adhesive residue Options • Fifth head rotary brush • Outfeed accumulation roller conveyor with buffer function • Deionization of front panels after cleaning • Modem for remote maintenance Advantages • Random loading possible due to automatic adaptation to front thickness and size • Up to 2,000 parts per 8 hours The RBM 1500 is a brushing machine for film-laminated 3D furniture fronts. The proven four-head rotary brush system removes adhesive overspray from the reverse sides of furniture fronts, ensuring optimal edge finishing. This is achieved by pneumatically controlled disc brushes that adjust their pressure and clean the rear of the panels. The RBM 1500 is designed for a capacity of up to 2,000 parts per shift, making it the ideal brushing system for small and medium-sized production runs. The RBM 1500 is equipped with automatic size and thickness detection for furniture fronts. This allows for adaptation to random loading without any loss of throughput time. The flexible control system enables brushing of both rectangular and contoured parts. Low-maintenance brushes and long service lives ensure low production costs. Hnsdpfsd S Eagex Af Tsg Production Specifications Machine: RBM 1500 Front shape: Rectangular / Contoured Minimum front size (L x W x H): 180 x 90 x 15 mm Maximum front size (L x W x H): 3000 x 650 x 38 mm Brushing operation: 2,000 parts per 8 hours Standard part size: 650 x 400 mm

Leto izdelave: 2025, Stanje: novo, Naravna kavčukova membrana ali silikonska membranska plošča Na področju izdelave 3D pohištvenih front vam nudimo tudi rešitve za preše, stroje za rezanje folij, vertikalne skladiščne sisteme za folije ter čistilne stroje! MEMBRANA za membranske preše – iz silikona ali naravnega kavčuka Najvišja kakovost, primerna za vsako membransko prešo (preše za folijo in furnir). Naše membrane lahko prejmete že narezane na želene mere ali kot blago v rolah. NARAVNI KAVČUK Tip: RM-2 Barva: siva Površina: gladka/gladka Standardne širine: 1700 in 2000 mm Kavčuk: naravni kavčuk Hjdpoi E Hp Tjfx Af Tsng Trdota: cca. 42°Shore Debelina: 1,8 mm, 2,5 mm in 4 mm Obratovalna temperatura: min.-20°C/max.+130°C

Stanje: dober (rabljeno), Leto izdelave: 2002, Regalni paternoster, Megamat, približno 3,04 m visok, 350 kg / gondola – rabljen - : Cena iz skladišča: 9.950.-€ (neto), demontaža v lastni režiji! Proizvajalec: Megamat Tip: 1568/267/16 Leto izdelave: 2002 Številka naprave: 16178 Hnjdpoxbhlnsfx Af Tog Višina naprave: 304 cm Širina naprave: 388 cm Globina naprave: 205 cm Število gondol: 16 Vmesne police: cca 16 kosov - Če da: število: 64 - Če da, odstranljive? Da Dimenzije gondole: Višina: cca 20 cm (z vmesnimi policami cca 10 cm) Širina: 325 cm Globina: 60 cm Skupna nosilnost: 5600 kg Nosilnost na gondolo: 350 kg Neuravnotežena teža: 1.000 kg Upravljanje: z Kardex Drive in SAP 3/N/PE 230/400V, 9A, varovalka dovoda 16A Stanje: dobro Na voljo: takoj Lokacija: Herrenberg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Zunanje mere: Višina: 5650 mm Opombe: Višino stroja je na željo stranke možno znižati za 1,5 m ali 2,0 m. Širina: 2.780 mm Globina: 2.312 mm Mere zabojnika: Višina: 55 mm Hjdpfoxmgwajx Af Tjng Širina: 2450 mm Globina: 864 mm Nosilnost police: 270 kg na predal Število polic: Število na željo stranke. Skupna nosilnost: 2 x 33.150 kg Število izvzemov: 1 Barva: modra Opombe: Višino stroja je na željo stranke možno znižati za 1,5 m ali 2,0 m. Prodaja izključno v DACH-države (Nemčija, Avstrija, Švica) in Beneluks (Nizozemska, Belgija, Luksemburg). Obveščamo vas, da trenutno prodajamo ali dostavljamo samo v D-A-CH in Be-Ne-Lux države. Prosimo za vaše razumevanje.

Stanje: zelo dobro (rabljeno), Belt conveyor 1.34m with drive Length: 134 cm Width: 50 cm Height: 90 cm Complete factory closure, large selection of mezzanine floors, pallet racks, shelving systems, paternosters. High-quality industrial machinery, lathes, grinding machines, hand tools. Hnjdpfjhvmlvsx Af Teg More items – new and used – can be found in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: XP500-1850x864, skupna višina: 7.800 mm, skupna širina: 2.180 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 520 kg, gradbena višina: 7.800 mm, gradbena širina: 2.180 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 230 V, višina mize: 800 mm, trajanje garancije: 6 meseci, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 12/2025, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Tukaj so na voljo 4 identični stroji tipa Kardex Shuttle XP500, letnik 2010. Stroji so bili vsako leto vzdrževani in pregledani s strani proizvajalca ter po potrebi servisirani. Stroji so v zelo dobrem stanju, strokovno osebje jih bo demontiralo in na želeni lokaciji sestavilo, preverilo in zagnalo. Za dodatna vprašanja smo vam z veseljem na voljo. Za vsako napravo nudimo 40 polic, po potrebi pa lahko dobite tudi dodatne police. Hodpfxjxuwazs Af Tsng

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), * Press size: 2800x1500mm * 2 pcs. tables with automatic Variopin system * Feeder and cutting station * Turning device Hjdpei Ary Defx Af Tjng * Foil storage paternoster * Pin system with Siemens S7 PLC control * Scrap foil press HSM 605

Leto izdelave: 2025, Stanje: novo, Silicone membrane sheet for membrane presses, silicone membrane for membrane presses, natural rubber membrane MEMBRANES for membrane presses – Silicone or Natural Rubber Top quality, suitable for all membrane presses (foil and veneer presses). Our membranes are available either pre-cut to your required dimensions or as roll goods. In the field of 3D cabinet front production, we also offer solutions for presses, foil cutting machines, carousel foil storage systems, and cleaning machines! MEMBRANES for membrane presses – made from silicone or natural rubber Highest quality, suitable for all membrane presses (foil and veneer presses). Our membranes are available either pre-cut to your required dimensions or as roll goods. SILICONE Type: SM-1 3mm Colour: translucent milky Surface: smooth / smooth Standard widths: 1700 and 1800 mm Polymer base: silicone Hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 230°C SILICONE Type: SM-1 2mm Colour: translucent milky Surface: smooth / smooth Standard widths: 1700 mm Polymer base: silicone Hardness: 50° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. 230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth / smooth Standard widths: 1700 and 2000 mm Rubber: natural rubber Hardness: approx. 42° Shore Thickness: 1.8 mm, 2.5 mm and 4 mm Operating temperature: min. -20°C / max. +130°C Hedpfx Aeff Agief Tong In the area of 3D furniture front production, we also offer solutions for presses, foil cutting machines, carousel foil storage systems, and cleaning machines!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KU 4165M, potovalna razdalja osi X: 572 mm, pomik osi Y: 322 mm, pomik po osi Z: 265 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 22, The value of the supplied spare parts amounts to approx. € 70,000 TECHNICAL DETAILS Loading Modules: 1 module Machining Modules: 3 modules Number of Spindles: 6 Control System Hodpfoxamh Esx Af Tjng System: Bosch Rexroth MTX Part Program Size: unlimited Remote Diagnostics: available Programming: ISO code, simulation via EdgeCAM CAM software Workpiece Handling and Loading System Loading System: parallel to main time, manual, with 3-axis handling or robot Part Feeding: paternoster / stack magazine Workpiece Changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed Force X: 1,100 N Feed Force Y1/Y2: 1,100 N Feed Force Z: 2,500 N Rotational Speed B-axis: 1,000 rpm Rotational Speed C-axis: 500 rpm Acceleration B-axis: 52 rad/s² Acceleration C-axis: 90 rad/s² Torque B-axis clamped: 1,000 Nm Torque B-axis unclamped: 287 Nm Torque C-axis clamped: 300 Nm Torque C-axis unclamped: 187 Nm Main Spindle Tool Holder: HSK 40-A Outer Diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal Coolant Supply up to: 120 bar Spindle Distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping Force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece Clamping Clamping System: EROWA clamping system Operation: pneumatic, 6 bar Tool Changer Tool Discs: externally presettable with position coding, diameter: Ø 290 mm Tools (2 discs with 12 positions each) per machining module: 22 Tool Disc Weight: 5 kg Max. Tool Weight: 2.5 kg Max. Free Tool Length: 186 mm Max. Tool Diameter: 63 mm Max. Tool Diameter with Free Position: 105 mm Shortest Chip-to-Chip Time: ≥ 1 s Max. Weight of Tools on Disc: 15 kg Positioning Time per Tool Step: 250 ms Tool Holder: HSK 40-A, as per DIN 69893 MACHINE DETAILS Machine Dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per Machining Module: approx. 4.5 t Weight per Loading Module: approx. 2.5 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 532.323/10-0, skupna višina: 6.454 mm, skupna širina: 6.810 mm, skupna dolžina: 2.810 mm, nosilnost na odsek shranjevanja: 180 kg, nosilnost: 40.000 kg, Here, a set of two Hänel Lean Lifts in a connected lift system is being auctioned! Machine Numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact Model Designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load Capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total loading capacity: 40,000 kg per Lean Lift (container weight must be deducted) Access Point 1 (Front) Clear opening height: 880 mm Access point height: 890 mm (standard height) Access point floor clearance: 890 mm LED lighting: present Manual sliding door: present Light curtain: present Access Point: Optoelectronic identification system (28-fold) for precise height measurement of stored goods Drive and Travel Speeds Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift power: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift Control Control type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST connection (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in the WMS Display language: German (DE) Additional memory card: available for S-version (standalone) Module 00 - remote operation lift mode Safety equipment: special safety equipment required when remotely operated outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Unladen weight without containers per system: 4,371 kg Container unladen weight per system: 2,275 kg Electrical Data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section for mains connection: 2.5 mm² at 9.6 A Hnodpfjxr Ng Usx Af Teg Maximum fuse rating for mains connection: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED field for colour marking of the requested item) - Height sensor technology for automatic detection of fill height and height-optimized storage - Hänel slotted wall: 131 usable storage profiles, slotted profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for high vertical and horizontal travel speeds - ESB package: redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Stanje: dober (rabljeno), Programming Cart KP-Qume QVT52 III comprising: Mobile PC Type: KP-Qume QVT52 III Screen size: 14" (35.5 cm) Screen type: Flat, white phosphor CRT Display: 24 lines / 80 or 132 characters / 1 status line / 1 user line Character representation: - 80 characters: 14 x 15 dot matrix in a 16 x 16 cell or 14 x 12 dot matrix in a 16 x 13 cell - 132 characters: 7 x 15 dot matrix in a 10 x 16 cell or 7 x 12 dot matrix in a 10 x 13 cell Refresh rate: Depending on character mode: 78, 70, or 65 Hz Character sets: 96 ASCII characters, 7-bit ISO. In QVT119+ emulation: IBM codepage 437/850 Screen saver: Yes, adjustable timer Memory: Depending on emulation, 4 or 7 screen pages Keyboard: New ASCII (N.A.), various languages, 20 + 1 programmable function keys Emulations: Qume QVT 101+/119+, Wyse WY30//50, TeleVideo TVI 910+/925/905, ADDS A2, ADM 5, ADD ENH, HZ 1500 Interfaces: 2 serial up to 38.4kBaud / 1x Host RS232, DB25 / 1x Printer RS232, DB9 / Data flow control: Xon/Xoff, DTR, or none / Option: RS422 or current loop Data format: 7 or 8 bit / even, odd, or no parity / parity check on or off / 1 or 2 stop bits Transmission mode: Full or half duplex / block mode Hjdpjivd Eajfx Af Tong Printer interface: 1x serial, RS232 DB 9 Power supply: 95 - 264 VAC, 47 - 63 Hz Power consumption (max.): 24 W Additional hardware: Bosch FDS 514 floppy drive Bosch PDV controller Bosch HBG 2 handheld device including cart and various data cables Condition: used Complete plant closure. Large selection of mezzanines, pallet racks, shelving racks, paternosters available. High-quality industrial machines, lathes, grinding machines, hand tools. Further items—new and used—available in our shop! International shipping costs on request!

Stanje: pripravljen za uporabo (rabljen), Sestavljeno iz: kompletnih orodij, knjig in dodatne opreme Tehnični podatki - Delovno območje -osnovni stroj z električno opremo -vhodna enota, MR -vnos knjižnega bloka z razdelilcem -lepilna enota -predgrelnik in ogrevana zaoblitvena enota -paternoster s stiskalno enoto -transportni trak Največja velikost: 370 mm x 270 mm x 80 mm Najmanjša velikost: 125 mm x 100 mm x 6 mm Hnedpsq Aufqofx Af Teg 14–36 ciklov na minuto

Leto izdelave: 2023, Stanje: novo, In the field of 3D thermoforming, we also offer presses, brushing machines, film storage carousels, and membranes on Machineseeker! Hedjd S Dqnopfx Af Teng Function Description: When the feed tray moves into position at the press exit, the workpiece carpet is pushed under the holding device. Through the generation of vacuum, it is held in place and then rotated 180°. The vacuum is then deactivated and the workpiece carpet has been turned, allowing the entire batch to be processed directly further on the turner. The batch is automatically discharged by the turner and placed on a side station for further processing. Advantages: • Increased production capacity due to rapid emptying of the press table • Time and personnel savings – as rough precutting is completely eliminated • Easier handling and control of parts • The film edges of 3D furniture fronts are protected, as the foil is not pulled over the edge of the furniture front • Automatic discharge is optionally available, enabling the entire workpiece carpet to be cut in a mat cutting machine • The pins are preserved with this turning system, as cutting does not occur on the pin table Design Features: • Torsionally rigid welded frame to house machine components • Standard dimensions approx. 2800 mm x 2220 mm x 1200 mm • Hydraulic unit for the turning process • Turning table consisting of 9 arms with foam rubber coating • Vacuum system including hose connections for the turning table • Turning cycle time: approx. 18–25 seconds • Installed power: approx. 8 kW • Siemens LOGO control system • Protective fences and safety devices included A video demonstrating the turning process is available upon request.

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.050 mm, skupna širina: 2.640 mm, skupna dolžina: 1.150 mm, lastna masa: 2.000 kg, Demontaža in prodaja rabljene samodejne vertikalne rotacijske skladiščne enote tipa Karusel Kardex INDUSTRIEVER. Višina 3,05 m, širina 2,64 m, globina 1,15 m, 24 pladnjev. Brez vidne identifikacijske ploščice – ni natančnih podatkov o nosilnosti, najmanj 50 kg na pladenj, niti o letu proizvodnje. Višina pladnja: 17 cm, uporabna širina: 2 m, uporabna globina: 34 cm, vsak pladenj z ustavljalno letvijo. Zadnji servis Kardex: 01/2024 Hnodsxxy Hlepfx Af Tsg Po dogovoru možna tudi dobava zabojnikov. Ponovna montaža možna na zahtevo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna višina: 13.450 mm, skupna širina: 4.135 mm, skupna dolžina: 3.092 mm, nosilnost na odsek shranjevanja: 400 kg, vhodna napetost: 400 V, nosilnost: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13.450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of Manufacture: 2016 Total Load Capacity: 2 x 30,000 kg Load per Tray: 400 kg (evenly distributed) Tray Dimensions: 3625 x 815 mm Number of Trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle Dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power Supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid subject to prior sale. Technical details per Logimat unit: - Maximum total capacity of the Schäfer Logimat: 2 x 30,000 kg - Maximum number of trays (approx.): 91, each 400 kg, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray dead weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint (approx.): 12.8 m2 - Capacity with 91 trays: approx. 269 m2, each tray approx. 2.95 m2 - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Equipped with LogiTilt - Equipped with LogiPointer Hnsdpferu A Atjx Af Teg - Equipped with LogiGate - Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if desired. Photos and videos of operation and dismantling are available on request via email. Price: special export price Price: excl. VAT Delivery time: in stock We have 3 Schäfer Logimat units in stock. Machinehandel De Leeuw BV specializes in used paternoster systems from manufacturers such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.500 mm, skupna širina: 2.780 mm, skupna dolžina: 2.921 mm, nosilnost na odsek shranjevanja: 500 kg, trajanje garancije: 12 meseci, nosilnost: 66.000 kg, The fully automated high-bay warehouses with state-of-the-art technology – available in heights from 2.5 to 15 meters, in increments of 500 mm, available from stock! Simply measure your ceiling height; only 25 mm of clearance to the ceiling is required for installing the storage tower. New units offered at special conditions, providing an alternative to used storage lifts (such as Kardex, Hänel, Modula, and Megamat). Feel free to browse our wide product range. We look forward to your inquiry. Delivery possible within 48 hours after receipt of payment! Hsdpfx Afjuu Rzlj Teng Optional app connectivity available! High-density storage in 25-millimeter increments provides maximum capacity with minimal footprint.

Leto izdelave: 2003, Stanje: dober (rabljeno), Type: TLI 4500/4300 Device No.: 03501 Year of Manufacture: 2003 Device Height: approx. 4560 mm Device Width: approx. 4280 mm Hedpfohyhlnjx Af Tong Device Depth: approx. 2330 mm Number of Shelves: 5 Shelf Width: approx. 3610 mm Shelf Depth: approx. 710 mm Shelf Height: approx. 1060 mm Compartment Load Capacity: 200 kg Total Load Capacity: 1000 kg Colour: beige

Leto izdelave: 1994, Stanje: pripravljen za uporabo (rabljen), Na voljo je razrezna linija, ki jo sestavljata vzdolžna in prečna žaga Anthon. Proizvodna zmogljivost pri 800 mm/500 mm: pribl. 20 m³/h, največje dimenzije plošč X/Y: 6300 mm/2500 mm, skupne dimenzije linije X/Y/Z: pribl. 48 m/16 m/3 m, teža: pribl. 60 t. 1) Žaga Anthon LNB-LNB, letnik izdelave: 1994, največja višina paketa: 150 mm, krmiljenje: Siemens S5. 2) Avtomatski paternoster lastne izdelave, etaže: 3, nivoji: 2. 3) 4x liftomat Holzma serije Hau, letniki: 2004, mesta za zlaganje: 4. 4) Sistem za dovajanje Systraplan, letnik: 1989, mesta za zlaganje: 3. 5) Končna krožna žaga Holzma, letnik: 1996. 6) Sekalnik Masur LZ 800, letnik: 2003. Vključuje kritične rezervne dele, kot je na primer rezervno krmiljenje. Gre za linijo za množično proizvodnjo. Dokumentacija je na voljo. Ogled na lokaciji je možen. Predvidoma na voljo od oktobra 2026. Hjdow U Ua Topfx Af Tjng

Stanje: delavnici obnovljeno (rabljeno), Currently, 2 identical machines are still available. Mechanically overhauled machine with new LTG control system StoreControl L. External dimensions: Installation height: 5,200 mm (modification possible at extra cost) Installation width: 1,600 mm Installation depth: 2,800 mm 38 carriers, each with a payload capacity of 250 kg with the following usable internal dimensions: Width: 1,300 mm Depth: 825 mm Height: from 55 to 750 mm Total machine payload: up to 2 x 10,000 kg Start of access opening at 875 mm above finished floor level (FFL), then 875 mm high Color: GREY / BLUE, carriers Sendzimir-galvanized, surfaces cleaned, signs of use possible Performance data: Vertical drive: 1 x 3.5 kW / 400 Volt Hnjdpfxod Hxpve Af Tsg Horizontal drive: 1 x 0.75 kW / 400 Volt Subject to errors, technical modifications, and detail deviations from the photos. Delivery and installation currently mainly within Germany, Austria, and several neighboring countries.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.950 mm, skupna širina: 3.380 mm, skupna dolžina: 3.075 mm, višina mize: 833 mm, Oprema: varnostna svetlobna zapora, External dimensions: Height: 4,950 mm Width: 3,380 mm Depth: 3,075 mm Container/Tray dimensions: Height: 55 mm Width: 3,050 mm Depth: 864 mm Shelf load capacity: 460 kg per tray Hedpfx Afew Emtnj Teng Number of trays: Number of trays according to customer request. Total payload: 2 x 33,800 kg Withdrawal opening height: 840 mm Colour: Light grey Remarks: The machine’s height can be reduced as per customer request. Sale exclusively to DACH countries (Germany, Austria, Switzerland) and Benelux countries (Netherlands, Belgium, Luxembourg).

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of manufacture: 2006 Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Hnodexq Tbtspfx Af Teg Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Price: On request via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Na voljo je celoten premazovalni sistem za premazovanje in nadaljnjo obdelavo ploščatega materiala. 1) Ena-komponentna naprav za nanašanje lepila Oest Ecopur FFN 2500, letnik 2008, vrsta lepila: poliuretan, področje uporabe: premazovanje plošč in trakov. 2) Ravna stiskalnica Bürkle HSO 192, letnik 1978. Stroj je bil leta 2018 generalno obnovljen, vključno s krmiljenjem in mehaniko. 3) Giljotina Hüttenlocher & Schäfer HSK/G, letnik 2008. 4) Paternoster Schwab TU s sistemom za odvijanje, letnik 2008. 5) Oblagalna miza Otech ÜZT 1088, letnik 2019. Transportni trak za lepilo Haas SN 10100, letnik 2008. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Hnsdpfsw Nyi Aex Af Tsg