Univerzalni Brusilni Stroj nakup rabljenega (30.639)

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Aciera F3 je kompaktna, natančna strojna miza za freziranje, ki je priljubljena zaradi svoje robustne konstrukcije in odlične obdelave površine. Pogosto se uporablja v orodjarnicah in delavnicah za izdelavo prototipov, saj omogoča natančno obdelavo majhnih in srednje velikih komponent. Nodpfxeznh Eho Aamjcw

Stanje: rabljeno, Universal tool milling machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 - Year of manufacture: 1979 Manual travel X: 300 mm | Y: 160 mm | Z: 330 mm Table size: 600 x 210 mm Spindle mounting: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed on X and Y axes: 5 to 500 mm/min. Rapid traverse: 1200 mm/min. Motor power: 1.5 and 1.9 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Infinitely variable feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill travel on the vertical milling head: 60 mm - Vertical milling head tiltable and extendable horizontally by 100 mm - Fixed angle table, 600 x 210 mm - Coolant system integrated in the machine base - Separate control cabinet included - Original chip tray for installation on machine base - Electrical diagrams included Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Nodpfx Aaer U St Usmocw Good condition

Stanje: rabljeno, Universal tool milling machine MAHO type MH 800 P with digital display and HEIDENHAIN TNC 121 path control Serial no. 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently rarely used in the workshop of an electronics company. Travels: X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z axis: 10-500 mm/min, stepless Feed rate Y axis: 5-250 mm/min, stepless Rapid traverse X, Z axis: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Quill travel vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill travel horizontal: 100 mm Nodev Amryopfx Aamjcw Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02 - 0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in machine base - Universal rotary table, 360° rotatable, 30° swivel and tiltable, 225 mm cross travel - Rotary table with direct division 72 x 5° and indirect division via indexing disc 1:120 = 1 rev. = 3° - Swiveling operator panel - Central lubrication - Operating manual - Machine mounted on a steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Required floor space L x W x H 2650 x 2000 x 2450 mm Weight 3700 kg + 550 kg steel plate Total weight 4250 kg (measured) In very good condition

Stanje: rabljeno, Universal tool milling machine DECKEL type FP 1 Machine No. 28317 Year of manufacture: approx. 1960 Travels X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Horizontal spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 0.8 and 1.1 kW, pole-changing Power supply 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gearbox steps - Feed on X and Z axes - Coolant system with mechanical pump integrated in the machine base Nodpsiy Ekvsfx Aamscw - Quill travel on the vertical milling head 60 mm - Vertical milling head swivels +/- 90° - Metal base made of angle iron with machine feet Space required (L x W x H): 1100 x 900 x 1650 mm Weight: 650 kg In good condition

Stanje: rabljeno, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Serial No. 16186651 Year of manufacture: 1986 Spindle mount: FEHLMANN SF32 Drilling capacity: Ø 30 mm in steel Thread cutting: up to M20 in steel Travel paths: X: 850 mm, Y: 435 mm Quill stroke (Z): 210 mm Vertical movement of milling head: 580 mm Nsdpfx Ajhik Ezeamjcw Feed rate X and Y: 1 to 8000 mm/min Feed rate Z: 1 to 4000 mm/min Rapid traverse X and Y: 8 m/min Rapid traverse Z: 4 m/min Clamping table area: 1570 x 500 mm Distance spindle nose – table: 130 - 720 mm Reach spindle – column: 450 mm Spindle speed: 50 - 7100 rpm, stepless Spindle drive: 10 kW Total power requirement: 20 kW Mains connection: 400 Volt, 50 Hz - HEIDENHAIN TNC 155 CNC control with TFT monitor - 3-axis control, X, Y, and Z (quill movement) - Hydro-mechanical tool clamping FEHLMANN SF32 - Thread cutting device - Cable remote control for machine operation and axis movements - Motorized vertical movement of the milling head with cutoff via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 holder - 20 tool holders FEHLMANN SF32 - Swiveling tool holder with 21 tool positions - Coolant system integrated in the machine base - Electrical cabinet mounted to the machine - Documentation: operating instructions, control manual and electrical diagrams Required space (L x W x H): 2350 x 2000 x 2300 mm Weight: 3.2 tons Very good condition

Stanje: rabljeno, Univerzalni orodjarski rezkalni stroj DECKEL tip FP 1 Serijska št.: 51265 Leto izdelave: cca 1967 Pomiki X: 300 mm Y: 150 mm Z: 340 mm Velikost mize 600 x 200 mm Vpenjanje vretena SK 40 - S20 x 2 Hitrost vretena 40-2000 vrt./min, 16 stopenj Moč motorja 1,0 in 1,6 kW, preklop polova Omrežni priključek 380 V, 50 Hz Njdpfx Ajghtvasamscw - Pomik v X in Z osi - Hitrosti vretena prek 2 hitrosti motorja in 8 stopenj v menjalniku - Pomik pinole na vertikalni rezkalni glavi 60 mm - nagibna, vrtljiva in nagibna kotna miza - Črpalka za hladilno sredstvo v podnožju stroja - Prosto stoječa komandna omara Dimenzije DxŠxV 1100 x 1100 x 1600 mm Teža 690 kg V dobrem stanju

Stanje: rabljeno, CNC-frezalni stroj ABENE, tip VHF-360TI Številka izdelave: 36084, leto izdelave: 2008 CNC-nadzor HEIDENHAIN, TNC 320 Hodi: X: 650 mm, Y: 510 mm, Z: 450 mm Velikost mize: 1200 x 400 mm Vretenčna prijemka: SK 40 Število vrtljajev vretena: 55 – 3000 vrt/min, 2 stopnji Hitrost podajanja: 30 – 4000 mm/min, brezstopenjska Ncsdpoty A Ehofx Aamow Hitrost hitrega gibanja (osi X + Y): 4000 mm/min Hitrost hitrega gibanja (os Z): 2000 mm/min Razdalja med koncem vretena in mizo: 20–495 mm Moč motorja pogona vretena: 7,5 kW Priključna napetost: 400 V, 50 Hz - CNC-nadzor HEIDENHAIN TNC 320 z vmesniki RS232, USB in LAN - elektronski ročni krmilnik za osi X, Y in Z - mehanski ročni krmilniki za osi X in Y - hitrost vrtljajev vretena se ročno preklaplja med 2 prestavami (stopnja 1 = 55–700 vrt/min.) + (stopnja 2 = 701–3000 vrt/min.) - koncept naklonjene postelje z bočno nameščenim vrtljivim vretenčnim nosilcem +/- 50° - naklon postelje se ročno nastavlja s pomočjo ročice - hidromehanska vpenjalna naprava za orodje - avtomatsko centralno mazanje - sistem za hlajenje s priključenimi električnimi črpalkami za hladilno mazivo - luč za osvetlitev stroja - nadzorna omara fiksno nameščena na stroju - odčitane delovne ure pri vklopljenem nadzoru: 14780 ur - odčitane delovne ure pri vklopljenem stroju: 12980 ur - odčitane delovne ure pri teku programa: 400 ur Zasedeno prostorno: D x Š x V: 2600 x 2000 x 2000 mm Teža: 2500 kg V zelo dobrem stanju

Stanje: rabljeno, Universal Tool Milling Machine DECKEL Type FP 1 Nedpfx Aor D T U Doamscw Universal Milling Machine Machine No. 2101 – Year of manufacture 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed on X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 and 1.8 kW (pole-changeable) Power connection: 380 Volt, 50 Hz - Stepless feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill feed at vertical milling head: 60 mm - Vertical milling head swivelable and extendable horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Separate control cabinet - Original chip tray to be mounted on the machine base - Electrical diagram available Required space (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 770 kg Very good condition

Stanje: rabljeno, Precision lathe BOLEY Type 4 LE Conventional high-precision universal multifunction machine tool Serial No. 42562 Centre distance: 500 mm Swing over bed: 240 mm Centre height over bed: 120 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 23 mm Chuck mounting: M40 x 3.5 mm external thread Tailstock taper: MK 2 Quill adjustment / travel: 80 mm Spindle speed: 30 – 1,300 rpm Drive power: 1.1 kW Power supply: 400 Volt, 50 Hz - 3-axis digital readout RSF ELEKTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring systems included in accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and steplessly via variator belt drive - Longitudinal feed via change gears + change gear set - Several 3-jaw and 4-jaw chucks, Ø 100, 125 and 140 mm, with chuck jaws - QUICK-CHANGE TOOLPOST MULTIFIX size A with 8 tool holders - Vertical slide with clamping device - Several clamping devices and machine vices - Clamping plates + clamping tables - Indexing table for use like dividing head - Dividing head with collets and tailstock Ncodpfxjw Dvv Ao Aamjw - Heavy-duty dividing head with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling tools + collets - High-speed spindle with pneumatic drive - Milling slide with collet chuck - Internal cylindrical grinding device - Live center - Fixed steady rest - Central oil lubrication VOGEL - Built-in mini compressor (3.5 bar) in the machine base - Compressed air maintenance unit for tool operation - Operating manual - Machine mounted on a steel plate (steel plate 1200 x 540 x 20 mm) Required space L x W x H: 1650 x 950 x 1750 mm Machine weight: 660 kg (with steel plate) Weight of accessories: 325 kg Very good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Naprodaj je brusilni stroj Rehnen, model SK-1, za brušenje robov in kontur, v robustni industrijski izvedbi. Stroj je idealen za brušenje ravnih in ukrivljenih obdelovancev, kot tudi za brušenje kontur in radijev. Zahvaljujoč 45° nagibni brusilni glavi je primeren za različne aplikacije v profesionalni proizvodnji pohištva, stopnic in notranje opreme. Tehnični podatki Proizvajalec: Rehnen Model: SK-1 Letnik: 2002 Moč motorja: 4,0 kW Nodpfx Aaozm R Rwjmjcw Napetost: 400 V Poraba električnega toka: 9,3 A Teža: približno 560 kg Priključek za odsesavanje: Ø 140 mm Izvedba CE Izdelano v Nemčiji Oprema 45° nagibna brusilna glava Oscilirajoča brusilna glava Velika delovna miza Neskončni brusilni trak Pnevmatsko napenjanje brusilnega traku Brusilna glava z odsesovalnim priključkom Ø 140 mm Ločeno upravljanje za brusilno glavo in oscilacijo Stikalo za izklop v sili Robustna industrijska izvedba Velika vrata za vzdrževanje na podstavku stroja Idealno primeren za: Brušenje robov Brušenje kontur Obdelava radijev in prostih oblik Masivno les MDF Iverne plošče Obdelovanci z furnirjem Stroj je v dobro ohranjenem, rabljenem stanju z običajnimi znaki uporabe, ki so značilni za ta model in starost. Je robustne konstrukcije in je primeren za profesionalno, dolgotrajno uporabo. Ogled in preizkus stroja sta možna po predhodnem dogovoru. Transport je možen za doplačilo! Stroj bo pred prodajo pregledan. Zaradi starosti stroja se ob prodaji poslovnim strankam izključi garancija. Tehnični podatki in oprema se lahko razlikujejo. Pridržujemo si pravico do sprememb, napak in medčasne prodaje. Vse informacije so podane brez jamstva.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Širokopasovni brusilni stroj SCM Sandya S600 RCS 110 | ODLIČNO stanje | Leto izdelave 2015 Naprodaj je visokokakovosten širokopasovni brusilni stroj proizvajalca SCM (Sandya S600 RCS 110) v zelo dobrem stanju. Stroj je popolnoma funkcionalen in takoj pripravljen za uporabo. Delovna širina: 1.100 mm Delovna višina: 4–170 mm Glavni motor: 15 kW Hitrost traku: 3–16 m/s Hitrost podajanja: 3–18 m/min Dolžina traku: 2.150 mm Jekleni kalibracijski valj R (Ø 140 mm) Kombinirana enota CS: Ncjdpfx Aoy Hn U Ajamow Gumijasti valj (Ø 160 mm, 30 Sh) Elektronski segmentni brusilni čevelj (širina segmenta 30 mm) Leto izdelave: 2015 Zelo lepo ohranjeno, tehnično brezhibno Vse informacije brez garancije. Tehnični podatki po navedbah proizvajalca oz. prejšnjega lastnika. Pridržujemo si pravico do napak, sprememb in vmesne prodaje. Brez jamstva ali garancije.

Stanje: rabljeno, številka stroja/vozila: 499, Universal punching machine SKAG SP347, Serial No. SP347 Nedpfx Ash Axmbsamocw Online video inspection via Skype video available. We would be pleased to welcome your visit – more machines in stock. Available immediately – viewing possible. In stock in Emskirchen / Nuremberg – machine can be tested.

Stanje: rabljeno, Leto izdelave: 2005, Število trakov: 2-trak, maks. prehodna višina: 150 mm, maks. delovna širina: 1350 mm 1. agregat: kombinirana brusilna enota Izvedba 1. agregata: jekleni kontaktni valj, brusni čevelj za 1. agregat: elektronski posamezni segmenti 35 mm Dolžina brusnega traku 1. agregata: 1900 mm Širina brusnega traku 1. agregata: 1370 mm Hitrost brusnega traku 1. agregata: 18 m/s 2. agregat: kombinirana brusilna enota Izvedba 2. agregata: gumi kontaktni valj 65° Shore, brusni čevelj za 2. agregat: elektronski posamezni segmenti 35 mm Dolžina brusnega traku 2. agregata: 1900 mm Širina brusnega traku 2. agregata: 1370 mm Hitrost brusnega traku 2. agregata: brezstopenjsko 2–18 m/s Iznos prahu s traku: za 2. agregat Kos Čistilne ščetke: da Primerno za brušenje laka: da Vakuumski transportni trak: da Hitrost podajalne mize: brezstopenjsko od 2,5 do 13 m/min Krmiljenje: zaslon na dotik Električna/pnevmatska oscilacija traku: da Vstopna višina: fiksna (zgornji del premičen) Digitalni prikaz mize Delovna oziroma višina sprejemne mize: 900 mm Moč motorja: 36 kW Lokacija skladišča: Nattheim Ncedpfx Aaozkh Sysmow

Stanje: rabljeno, Leto izdelave: 2010, x-travel 400 mm y-travel 300 mm z-travel 400 mm Total power requirement 3.6 kW Ncjdpfev T Np Nox Aamjw Machine weight approx. 1.3 t

Stanje: rabljeno, Leto izdelave: 1981, x-travel 650 mm y-travel 450 mm Workpiece height 585 mm Control ADCOS CNC 400 Total power requirement 15 kW Machine weight approx. 5,000 kg Space requirements approx. m HAUSER (Switzerland) CNC-controlled Double-Column Coordinate Grinding Machine Model S 40 – CNC 311 / ADCOS 400 CNC Year of manufacture: 1981 / modernized in 2008 # 0125 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel (longitudinal, X-axis) max. 650 mm Grinding head traverse (Y-axis) max. 450 mm Vertical adjustment of the crossbeam (W-axis) max. 500 mm Grinding spindle stroke (Z-axis) max. 140 mm Grinding head stroke rate (4Hz) 0.5–12 m/min Vertical clearance between table/grinding spindle 0–585 mm Njdpet Hw S Usfx Aamocw Passage between columns 750 mm Maximum conical grinding 16° Grinding diameter (bore) approx. 230/360 mm 18 spindle speeds, steplessly adjustable depending on spindle motor, 4,500–80,000 rpm Fine feeds in X and Y axes and W axis 0.5–1,500/3,000/800 mm/min Planetary speed (C-axis) 5–250 rpm Total drive approx. 15 kW – 400 V – 50 Hz Machine weight approx. 5,000 kg Accessories / Special Equipment: • CNC path control replaced in 2007 with an ADCOS CNC 400 control unit featuring a large screen and direct programming at the control, with electronic handwheel for fine positioning of axes: X=table longitudinal, Y=grinding head traverse, Z=quill vertical/stroke, C=rotary axis spindle/quill, U=automatic infeed, W=crossbeam vertical adjustment • Z-axis as rapid traverse for reduced machining times, plunge grinding, face grinding, pre-selection of reversal points (approach + teach-in) and stepless control of stroke speed, thus serving as a quasi 3rd positioning axis • U-axis as manual and controlled infeed axis (radial), at the grinding head, with electric display of infeed size • 1 grinding motor mounted with spindle speed approx. 30,000 rpm • Integrated acoustic grinding contact indicator KSV 5 • Separate coolant system with band filter, separate control and switch cabinet, separate hydraulic system, central lubrication, dust extraction, and more Condition: very good / demonstration-ready under power Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1987, x-travel 400 mm y-travel 250 mm Workpiece height 485 mm CNC control ELESTA CNC 314 Ncodjt Hw Txopfx Aamew Total power requirement 10 kW Machine weight approx. 4,000 kg Space requirement approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Model S 3 – CNC 314 Year of manufacture 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Table traverse (longitudinal/X) max. 400 mm Table traverse (cross/Y) max. 250 mm Vertical adjustment of grinding slide max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head stroke, hydraulic 15 - 7,500 mm/min Clearance table/grinding spindle min./max. -75 / +485 mm Grinding spindle overhang 350 mm Taper grinding max. 16 ° Grinding Ø (bore max.) approx. 230 mm 18 spindle speeds depending on spindle motor steplessly adjustable 4,500-80,000 rpm. Planetary speed (C-axis) steplessly adjustable 5-250 rpm U-axis, radial infeed 6 mm Total drive approx. 10 kW - 380 V – 50 Hz Machine weight approx. 4,000 kg Accessories / Special features: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with display, for 4 axes (= XYC + U-axis), with interpolation in 2 ½ dimensions (XYC). The U-axis is a feed axis and not capable of interpolation. Teach-in programming directly at the machine, with various subprograms, as well as manual movement of axes via control panel or electronic hand-held unit. Separate digital readout for the Z-axis • U-axis as manual and controlled radial feed axis on the grinding head, with digital readout for feed position, • 2 grinding motors #5674 and #3980 for spindle speeds up to 80,000 rpm • Integrated acoustic grinding contact indicator KSV 5 • HI-Cut device (oil cooling) and automatic fire suppression system • Separately standing coolant unit with belt filter, separately standing hydraulics and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock as inspected Payment: strictly net - upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1990, Motor power 5 kW Weight 1,500 kg Control CNC Nedpfx Aaowgnz Nomocw Offer in progress!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Description to follow! Ncedpjzbczlofx Aamsw

Stanje: rabljeno, Leto izdelave: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm Total power requirement 6.3 kW Machine weight approx. 2 t Space requirement approx. 7.36 m² O F F E R We can offer you, subject to prior sale and errors, ex-stock on a non-binding basis: H E R M L E CNC-controlled Universal Tool Milling Machine with 4th axis Model UWF 600 CNC ( HDH TNC 355 ) Year of manufacture 1990 # 8637 Table travels: longitudinal X 400 mm vertical Z 350 mm Cross travel Y 330 mm Table size 630 x 335 mm Spindle taper SK 40 Spindle speeds in 3 ranges Vertical / Horizontal 40 – 6,000 rpm Quill stroke Vertical 63 mm Feeds, infinitely variable 1 – 2,000 mm/min Feed force 4,800 N Rapid traverse 5,000 mm/min Spindle drive 3.5 kW Total connected load 6.3 kW - 380 V - 50 Hz Weight 2,000 kg Accessories / Special equipment • HEIDENHAIN 4-axis contour control Type TNC 355 with graphics and various subprograms, mobile electronic handwheel • Fixed angular table installed, fitted with CNC dividing head by HOFMANN with RÖHM three-jaw chuck 160 mm dia., center height approx. 125 mm, possibly also tiltable. Resolution 0.001° (dividing head can also be removed!) • Vertical head easily swivels away for use of the horizontal spindle • Hydraulic tool clamping in the V-spindle, 5 various arbor holders • Free-standing control cabinet, free-standing coolant facility • Central lubrication, ampere meter, etc. An ideal machine for toolmaking and electrode production Nsdpfx Aajt Hxbwomocw Condition: good – ready for demonstration, HDH control computer was replaced Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice Further conventional and CNC milling machines by DECKEL, MAHO, MIKRON or HERMLE as well as other renowned manufacturers available from stock! Please contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, x travel 450 mm y travel 200 mm z travel 465 mm Total power requirement 2.6 kW Machine weight approx. 1.2 t O F F E R We can offer you the following, subject to prior sale and errors excepted, from stock on a non-binding basis: KUNZMANN Universal Milling Machine with HEIDENHAIN 3-axis Digital Readout Type UF6N Year of manufacture: 1983 Serial no.: 18625 _____ Table travel: longitudinal motorized / manual 450 / 440 mm vertical manual 400 mm Cross travel of milling slide manual 200 mm Fixed angle table 860 x 240 mm Height under spindle 50 - 700 mm Spindle taper SK 30 / MT4 18 spindle speeds 30 – 1,275 rpm Feed stepless 12 stages 13 – 328 mm/min Rapid traverse 1,000 mm/min Spindle drive 2.6 kW Total drive 2.6 kW - 380 V - 50 Hz Space requirement 1.40 x 1.90 x 1.70 m Ncodpfsxdnpljx Aamsw Weight 1,200 kg Accessories / Special equipment • Heidenhain 3-axis digital readout with extended features, absolute measurement, mm/inch switching, etc. • Movable universal vertical milling head, swivels +/- 45° • Large, fixed table, 860 x 240 mm, mounted • Coolant system, chip tray, central lubrication, operation manuals • Integrated work light Condition: Very well maintained! Ideal machine for (training) workshop or small batch production!! Please click here for a video of the machine: UF6N/4 Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice We always have a wide selection of conventional and CNC milling machines in stock. Please contact us!

Stanje: rabljeno, Leto izdelave: 1990, x-travel 400 mm y-travel 250 mm Workpiece height mm Control CNC 314 ELESTA Total power requirement 15 kW Machine weight approx. 5,500 kg Space requirement approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Type S 3 – CNC 314 Year of manufacture: approx. 1990 # S 32086 Ncedpfet Hxcnox Aamow _____ Table size approx. 600 x 380 mm Table load approx. 300 kg Table longitudinal travel max. (X) 400 mm Table cross travel max. (Y) 250 mm Grinding slide vertical adjustment max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head slide stroke, hydraulic 15 – 12,000 mm/min Mounting height table/grinding spindle min./max. -75 / +485 mm Spindle overhang 350 mm Taper grinding max. 16° Max. grinding diameter of bore approx. 230 mm 18 spindle speeds depending on spindle motor, continuously variable 4,500-80,000 rpm Planetary speed (C), continuously variable 5-250 rpm U-axis, radial infeed 6 mm Total drive approx. 15 kW - 400 V – 50 Hz Weight / Total weight approx. 4,000 / 5,500 kg Accessories / Special equipment: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with monitor, for 4 axes (= X, Y, C + U axis), with circular and linear interpolation in 2½ dimensions (X, Y, + C). Teach-in programming directly at the machine. Error messages, RS 232 interface with various subprograms, as well as manual axis movement via the control panel or with electronic handwheel. • Separate digital readout for Z-axis, Z-axis with rapid traverse feature • Programmable C-axis for simple contours and pockets, radius grinding • U-axis as a manual and controlled radial infeed axis, mounted on the grinding head, with digital readout, enables automatic grinding of different bore diameters • 2 grinding motors up to 80,000 rpm spindle speed • Integrated acoustic grinding contact detector KSV 5 • HI-Cut system (oil cooling) and automatic fire protection system Krafft Buer • Separate coolant system with band filter, separate hydraulics with cooler • Separate control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately no further accessories currently available. Condition: very good / demonstration-ready under power Delivery: ex-stock here – as inspected Payment: net – after receipt of invoice

Stanje: rabljeno, Leto izdelave: 1975, Workpiece diameter 125 mm Grinding depth 50 mm Clamping length 2000 mm Total power requirement 0.5 kW Machine weight approx. 1000 kg Space requirement approx. ... m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock: T E C H N I C A (Switzerland) Vertical Centre Hole Grinding Machine Ncjdsvanrcepfx Aamsw Model ZSM 5100 - 2000 Year approx. 1975 Serial No. 66 32 7872 _____ Centre distance 50 – 2,000 mm Workpiece diameter 8 - 125 mm Swing diameter at tailstock centre / guideway 290 mm Swing diameter at vice / grinding head column approx. 300 mm Workpiece weight approx. 250 kg Max. centre hole taper diameter 2-50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 4-150 mm Grinding head stroke, vertical, coarse adjustment 130 mm Fine infeed of grinding pin via handwheel 0.01-1 mm Grinding pin diameter 20 - 60 mm Grinding spindle speeds depending on belt pulley 13,000 – 45,000 rpm Workpiece drive 0 rpm Total drive approx. 0.5 kW 400 V - 50 Hz Weight approx. 1,000 kg Accessories / Special equipment: • The machine has been extended with a bolted base to 2000 mm! • In this machine, the grinding pin rotates around a parallel, offset axis and thereby generates a planetary movement along the hollow conical surface to be ground at the centre of the workpiece. • Manually height-adjustable workpiece centre rest with carbide inserts and counter-centre, including manual clamping and centring of the workpiece. • Manually operated dressing device mounted laterally to the grinding spindle, stroke approx. 40 mm with an additional oscillating movement for generating a geometrically exact conical form • Pneumatic oil mist lubrication for grinding spindle • Workpiece pre-centring device, foldable • Manually height-adjustable tailstock and recess in the machine base for longer workpieces, but without workpiece drive in the tailstock. Condition: good – ready for demonstration – current new price at least approx. €80,000. Rare machine! A video can be found at this link: Delivery: ex stock - as inspected Payment: net – payment upon receipt of invoice before delivery We look forward to receiving your order. Further centre hole grinding machines available.

Stanje: rabljeno, Leto izdelave: 1999, Grinding diameter 360 mm Grinding length 650 mm Centre height 180 mm Control SIEMENS 840 D Total power requirement 15 kW Machine weight approx. 9500 kg Space requirement approx. m KARSTENS CNC-controlled external cylindrical grinding machine Model K 52 - 650 (98 019 06 52051) Year of manufacture 1999 --- Centre height: 180 mm Distance between centres / max. clamping length: 750 mm Max. grinding length: 650 mm Grinding length for plunge grinding: 150 or 210 mm External grinding diameter approx. min./max.: 5-360 mm Max. grinding width for plunge grinding: 150 mm Max. workpiece weight: between centres / chuck-mounted: 70/250 kg Grinding wheel dimension (diameter x width x bore): 600 x 150 x 203 mm Cutting speed, infinitely variable, max.: 35/50 m/sec Cross slide travel (X-axis): 360 mm Cross slide feed rates: 0.01 – 6,000 mm/min Ncsdpfjt Hw A Hox Aamow Workhead (MK 4) speed range (C-axis), stepless: 1–1,000 rpm Table speed (Z-axis): 0.01 – 10,000 mm/min Measuring system resolution: 0.0002/0.0005 mm Spindle drives: 11/15 kW * Total drive approx. 30 kW - 400 V - 50 Hz Weight approx. 9,500 kg Accessories / Special Features: - Granite machine base offering all technical and thermal advantages - SIEMENS CNC control type 840 D with software and sub-programs - Handheld control unit - MOVOMATIC measuring control type ES 400 with hydraulically retractable measuring arm - Grinding slide set to 0°, ideal for straight plunge grinding - Grinding wheel arranged on the left side, extra wide grinding wheel up to 210 mm - Workhead with fixed centre or flange drive - Tailstock mounted on sub-slide, hydraulic stroke approx. 50 mm, with cylinder correction - Driven diamond wheel profiling device for CNC profiling of the grinding wheel - Wheel balancing unit integrated in the machine - The machine is currently equipped with a HEILIG workpiece loading gantry, which automatically loads/unloads cylindrical workpieces (approx. 30 x 100 mm L) into and out of the working area - Raw and finished workpieces are handled simultaneously via double gripper - Separate hydraulic power unit; DEMAG chain hoist for simpler grinding wheel changes - Complete machine enclosure with manually lockable and electrically monitored doors - No coolant system, but includes an intermediate tank for central supply Condition: Good – ready for demonstration soon – ideal machine for plunge grinding operations Delivery: ex stock – as inspected Payment: strictly net – upon invoice receipt We offer a wide selection of grinding machines of all types. Please contact us with your requirements.

Stanje: rabljeno, Leto izdelave: 1973, Maximum grinding diameter: 30 mm Regulating wheel width: 12 mm Grinding wheel width max.: [please specify] mm Total power requirement: [please specify] kW Machine weight approx.: [please specify] t Nedpfxet Hwwws Aamjcw Space requirement approx.: [please specify] m

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), O F F E R We can offer you, subject to prior sale and errors excepted, the following from stock, without obligation: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Type T Year of manufacture 1990 _____ Centre height of grinding carriage approx. 200 mm Grinding wheel Ø x bore 200 x 30 mm Grinding wheel speed approx. rpm Grinding wheel drive power approx. kW Centre height of workpiece headstock 160 mm Workpiece headstock longitudinal adjustment approx. 100 mm Workpiece headstock cross adjustment approx. 200 mm Workpiece headstock swivels approx. 2 x 30 ° to each side Collet clamping range 0.5 – 20 mm Weight approx. 500 kg Accessories / Special features: Nedpfexzuuvox Aamscw • Workpiece headstock swivels for pointing or deburring • Collet chuck with approx. 10 different collets • Plexiglass safety cover for grinding wheel • Compact, mounted on a sturdy base • Possibly with cross-slide feed device Condition: good to very good - ready for demonstration under power Delivery: ex-stock - as inspected Payment: strictly net - upon receipt of invoice We look forward to your order. Further tool grinding machines in stock – please inquire!