Univerzalna Stružnica nakup rabljenega (3.477)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Gujdpfxjwg Take Ah Djh Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: rabljeno, Leto izdelave: 2003, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8H, Description: Main Spindle: Technology: Belt-driven spindle Guedpfxexiukme Ah Djh Speed: 5,600 rpm Power: 18.5 kW Torque: 170 Nm Bar capacity: 42 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop Size 42 Sub Spindle: Technology: Belt-driven spindle Speed: 5,600 rpm Power: 11 kW Torque: 150 Nm Workpiece clamping: Collet chuck, Hainbuch Spanntop mini Axfix Size 42 Ejector: Hydraulic with flushing Tool Turret I (X/Y/Z): Technology: Turret with 10 stations Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 12.4 Nm Travel in X/Y/Z: 140/70/450 mm Rapid traverse in X/Y/Z: 15/6/30 m/min Tool Turret II (X/Z): Technology: Turret with 10 stations Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 12.4 Nm Travel in X/Z: 140/450 mm Rapid traverse in X/Z: 15/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant system with paper band filter Raw material feed: Short bar loader, FMB SL80S Finished part removal: Hydraulic part gripper interface with conveyor belt Oil mist extraction: Electrostatic separator, LTA AC3001 Other equipment: Various tool holders

Stanje: novo,

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Tehnični parametri: Gsdpfxexmvhbj Ah Douh Obodni premer nad ležiščem: 600 mm Vrtina vretena: 74 mm Obrati vretena – razpon: 3000 Vzdolžni hod Z: 1250 mm Prečni hod X: 398 mm Maks. obodni premer nad vozičkom: 480 mm

Stanje: zelo dobro (rabljeno), Star SA-12 Swiss Type Automatic Lathe Technical Data Rapid traverse (X, Y, Z, ZB): 370 mm Maximum feed rate (X, Y, Z, ZB): 270 mm Minimum input increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive type: Spindle drive Main spindle motor: 2.2 / 3.7 kW Spindle indexing angle: 1° or 15° Spindle bore: 20 mm Tool Slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1,970 / 2,330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Gedjwi Ty Aopfx Ah Djuh Sub Spindle Max. clamping diameter: 13 mm Max. part length for front ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8,000 rpm Sub spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Electrical Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF DELIVERY Includes (non-exhaustive list): - STAR SA-12 Swiss type automatic lathe - Control unit: Fanuc Series 18i-T - Fire extinguishing system - Coolant tank - Transformer - LNS bar feeder Exact scope of delivery as per photo gallery No guarantee is given regarding the accuracy, completeness, or currency of the information provided.

Stanje: novo,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, TECHNICAL DATA Travel range X1, X2, X3 axis: 190 mm Travel range Y1, Y3 axis: ±40 mm Travel range Z axis: Z1: 257 mm Z2: 500 mm Z3: 650 mm Spindle speed: 5,000 rpm Turning diameter: 125 mm Gedowqz E Aspfx Ah Djuh Bar diameter: 51 mm Turrets: Number: 3 Capacity: 12 each CNC controller: Fanuc Series 16i-TB SCOPE OF DELIVERY Includes (not an exhaustive list): Miyano ABX-51TH2 CNC lathe (Year of manufacture: 2007) Toolholder set Fire-extinguishing system KNOLL coolant pump / high-pressure system Chip conveyor LNS Sprint 555 bar loader (Year of manufacture: 2006) Precise scope of delivery as shown in the photo gallery No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Leto izdelave: 2006, Stanje: zelo dobro (rabljeno), STAR ECAS 32 T CNC Automatic Lathe - Very good condition - Extensive range of accessories included - Detailed photo series available in the PDF catalogue TECHNICAL DATA Gujdpfx Ael R Ix Soh Doh Max. machining diameter: 32 mm Max. headstock stroke: 350 mm Tool post: First turret: 10 stations Second turret: 10 stations Number of turning tools: Max. 2 tools per station Tool shank: 16 mm Sleeve holder: Number of tools: Max. 3 tools per station Max. drilling capacity: 23 mm Max. tapping capacity: M12 x P1.75 Max. die cutting capacity: M12 x P1.75 Driven tool attachment: Number of tools: Max. 2 tools per 1 station Max. drilling capacity: 10 mm Max. tapping capacity: M8 x P1.25 Max. milling capacity: 12 mm Max. slotting capacity: 2 mm x 10 mm Main spindle min. indexing degree: 0.01° Main spindle speed: 7,000 rpm Driven tool spindle speed: 5,700 rpm Coolant tank capacity: 230 l Dimensions: 3,175 x 1,745 x 1,860 mm Centre height: 1,084 mm Weight: 5,700 kg Power consumption: 8.0 kVA No guarantee is given for the correctness, completeness or currentness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2008, Colchester Harrison Alpha 1400U CNC Lathe Footprint: 1.7 x 3.1 m Height: approx. 1,500 mm Weight: 3,200 kg Equipment: Electrically interlocked chuck guard, full enclosure, 100-litre coolant tank and pump, fully extendable chip tray, machine lighting Turning length: 1,250 mm Swing diameter: 400 mm Centre distance: 1,250 mm Spindle bore: 54 mm Turret, number of tool positions: 8 Tool size: Standard: 20 x 20 mm Boring bar: 32 mm No guarantee is given for the correctness, completeness, or currentness of the information. Gedpfxornkdyo Ah Djuh

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder Gujdpfet E Dbyjx Ah Dsh - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Maier ML 26 E CNC Lathe TECHNICAL DATA Number of axes: 11 Spindle bore: 32 mm Traverse speed: 32 m/min Control: Maier Pro GE-Fanuc Guide bush: 451.001 Main Spindle Passage: 26 mm C-Axis: Yes Mechanical indexing 5°: Yes Headstock stroke: 220 mm Main spindle speed: 0 – 6000 rpm Power: 3.7 kW / 5.5 kW (7.5 kW) Collet: 161E Counter Spindle Gjdpfx Ahou S Rivs Dsuh Passage: 26 mm C-Axis: Yes Mechanical indexing 5°: Yes Max. travel (Z): 220 mm Counter spindle speed: 0 – 6000 rpm Main spindle power: 1.1 kW Collet: 161E Cross Machining Base holders for blanks 5 pcs. 16 x 16: Yes Number of driven tools: 4 Power of driven tools: 0.5 kW Backworking Drive power: 0.5 kW Number of tools: 4 of which driven tools: 4 Collets: ER16 Turret Number of tools: 16 Number of driven tools: 8 Drive power: 0.5 kW C-Axis: 360° Z-Axis: 175 mm X-Axis: 200 mm Collets: ER16 SCOPE OF SUPPLY Includes (not limited to): Maier ML 26 E CNC Lathe Oil mist separator Transformer Chip conveyor High-pressure pump / belt filter unit Fire extinguishing system LNS bar loader Complete operating documentation Exact scope of supply as per photo gallery No guarantee is given for the accuracy, completeness and timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, STAR SH-12 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Spindle speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in the turret: 3 Machine dimensions: 1500 x 950 x 1650 mm Weight: Approx. 950 kg Gjdpfxovllmhe Ah Deuh SCOPE OF SUPPLY Includes (non-exhaustive list): - STAR SH-12 CNC automatic lathe - Bar feeder - Coolant pump - Transformer For the exact scope of supply, please refer to the photos. We do not assume any liability for the accuracy, completeness or timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2005, CITIZEN K12 CNC Lathe Automatic TECHNICAL SPECIFICATIONS Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extraction length: 80 mm Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15,000 rpm Max. machining diameter of sub spindle: 12 mm Max. machining length of sub spindle: 40 mm Max. drilling diameter for back machining: 6 mm Max. thread diameter for back machining: M5 Sub spindle speed: 10,000 rpm Tool turret, number of tools: 8 Speed of driven tools: 6,000 rpm X1-axis: 122 mm Z1-axis: 200 mm Z2-axis: 150 mm Weight: 1,950 kg SCOPE OF DELIVERY Includes (list not exhaustive): Citizen K12 CNC automatic lathe Chip tray Transformer Complete operating documentation Exact scope of delivery as per photo documentation We do not accept any liability for the accuracy, completeness or timeliness of the information provided. Gedpfevrz H Rex Ah Dsuh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, TECHNICAL DATA Clamping Units Collet machine with main and sub spindle: 26 mm Max. turning length with workpiece gripper: 67 mm Maximum part length: Max. 300 mm / Ø 26 Clamping cylinder L/R spindle: Stationary Max. drilling diameter L/R spindle: Ø 12.00 mm Max. thread diameter L/R spindle: M8 Spindle Motor power: VAC 2.2/3.7 kW Spindle speed range L/R spindle: 80 ~ 8,000 rpm L spindle travel Z1 axis: 70.00 mm R spindle travel X2 axis: 180.00 mm R spindle travel Z2 axis: 238.00 mm Tool Slide Tool slide: Vertical linear slide Number of tool stations: 16.00 Number of tool stations slide 1: 6/4 Tool shank size: 16.00 mm Guedjwqz Haspfx Ah Dsh Internal tool holder diameter: Ø 20.00 mm X1 axis travel: 135.00 mm Y1 axis travel: 260.00 mm Number of turning tools (L spindle) X-/Y-unit: 2/2 (Usable for L/R spindle) Z-unit: 2+2 Speed range: 100 ~ 4,000 rpm Rotary tool motor: 0.5 kW / 0.5 kW Driven tools max. drill diameter: 8.00 mm Rotary tool motor max. tapping diameter: M6 Tool Slide 2 Tool slide: Vertical linear slide Number of tool stations: 7.00 Number of tool stations slide 2: 3/4 Tool shank size: 16.00 mm Internal tool holder diameter: Ø 20.00 mm Y2 axis travel: 215.00 mm Machine Dimensions Machine height: 1,670.00 mm Floor space (W x D): 2,320 mm × 1,335 mm Machine weight: 3,000.00 kg SCOPE OF SUPPLY Includes, among others (list not exhaustive): Miyano BX-26S CNC lathe (Year of construction: 2008) Tool holders (see photo of the machine interior) Fire extinguishing system Control for high-frequency spindle High-frequency spindle Chip conveyor Oil mist separator Exact scope of supply according to photo documentation No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Leto izdelave: 1999, Stanje: zelo dobro (rabljeno), Citizen M20-C CNC Swiss-Type Automatic Lathe Technical Data Maximum Machining Diameter: 20 mm Maximum Machining Length: 320 mm per collet Maximum Drilling Diameter: 10 mm Maximum Tapping Diameter: M8 Bar Capacity (through-hole diameters): 24 mm, 21 mm Main Spindle Speed Range: 200 – 8,100 rpm Spindle Speed Adjustment: Infinitely variable, S4-digit Maximum Drilling Diameter, Driven Tools: Gang Tool Post: 5 mm Turret: 5 mm Maximum Clamp Diameter, Driven Tools: Gang Tool Post: 10 mm Turret: 7 mm Maximum Tapping Diameter, Driven Tools: Turret: M5 Tool Spindle Speed: Gang Tool Post: 250 to 5,000 rpm Turret: 320 to 6,380 rpm Tool Spindle Speed Adjustment: Infinitely variable, S4-digit Back Spindle Maximum Collet Diameter: 20 mm Maximum Protruding Length of Workpiece (Front, after Back Machining): 125 mm Maximum Drilling Diameter (Back Machining): 8 mm Maximum Tapping Diameter (Back Machining): M8 Back Spindle Speed Range: 150 to 7,200 rpm Back Spindle Speed Adjustment: Infinitely variable, S4-digit Tool Capacities: Gang Tool Post: Turning 5, Drilling 3 (total 8 tools) Turret: 10 positions Turret Indexing: 10 positions Tool Holders: Gang Tool Post: Special M20 gang tool holder Turret: Ø10 – Ø10 mm (with positioning pin) Tool Dimensions: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Maximum Tool Diameter, Driven Tool Holder: Gang Tool Post: Drill/End Mill: Ø10 mm Turret: Drill/End Mill: Ø7 mm; Tap: M6; Slitting Saw: 45 x 12.7 mm Rapid Traverse Rates: X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Minimum Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001° Spindle Indexing: 0.001° Center Height: 1,070 mm Motors: Main Spindle: 2.2 / 3.7 kW Back Spindle: 0.75 / 1.5 kW Gedpfx Ahsktfiao Douh Gang Tool Motor: 0.4 kW Turret Motor: 0.4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0.4 kW Coolant Pump: 0.25 kW Lubrication Motor: 0.004 kW Power Input Capacity: 14 kVA Required Installation Space: 1,100 x 2,540 x 1,700 mm Machine Weight: 2,500 kg No guarantee is given for the accuracy, completeness or timeliness of the information provided.

Stanje: dober (rabljeno), TECHNICAL DATA AXES Rapid traverse X, Y: 15,000 mm/min Rapid traverse A, B: 15,000 mm/min Rapid traverse Z1, Z2, E: 18,000 mm/min Rapid traverse C: 90,000°/min Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. spindle stroke: 205 mm Max. drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. tapping capacity: Stationary: M10 x P1.5; Driven: M6 x P1.0 MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for forward ejection: 150 mm Max. unclamping length: 75 mm Spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operating mode: Right-handed Dimensions: 2,700 x 1,400 x 2,400 mm Weight: 3,400 kg SCOPE OF DELIVERY Includes (not exhaustive): Control: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Guedou Uic Tepfx Ah Dsh Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of delivery as per photos We do not guarantee the correctness, completeness or currentness of the information provided.

Stanje: dober (rabljeno), STAR SV-32 CNC Sliding Headstock Lathe TECHNICAL DATA Main Spindle, Bar Capacity: 32 mm Guedpfxou Uicyj Ah Djh Travel: 310 mm Spindle Speed: 7,000 rpm Spindle Drive Power: 7.5 kW Minimum Increment, C-Axis: 0.01° Sub Spindle, Bar Capacity: 32 mm Spindle Speed: 7,000 rpm Spindle Drive Power: 7.5 kW C-Axis Resolution: 0.01° Turret: Number of Tool Stations: 10 of which driven: 10 Speed of Driven Tools: 5,700 rpm Driven Tools, Power: 2.8 kW Tool Holder: Number of Tools: 4 of which driven: 3 Speed of Driven Tools: 6,000 rpm Weight and Dimensions: Weight: 3,800 kg Dimensions: 2,700 x 1,400 x 2,400 mm SCOPE OF SUPPLY Includes (not limited to): CNC Control: Fanuc Fire Suppression System: Siemens Oil Mist Separator: Donaldson Transformer High-Pressure Pump Parts Conveyor Chip Conveyor Precise scope of delivery as per photo documentation. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, STAR ECAS 12 CNC Swiss Type Automatic Lathe TECHNICAL DATA Maximum machining diameter: 13 mm Maximum headstock stroke: 205 mm Maximum drilling capacity: - Stationary tool: 10 mm - Driven tool: 8 mm Maximum tapping capacity: - Stationary tool: M8 x P1.25 - Driven tool: M6 x P1.0 Maximum milling capacity: 10 mm Maximum thread rolling capacity: M8 x P1.25 Maximum slotting capacity: 1.5 x 4 mm Feed rate (axes Z1, X1, Y1, Z2, X2, Z3, X3, Y3): 18,000 mm/min C1, C2 axes: 194,400°/min Maximum rapid traverse rate (axes Z1, X1, Y1, Z2, X2, Z3, X3, Y3): 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: - X1, X2, X3: 0.001 mm - Z1, Z2, Z3, Y1, Y3: 0.001 mm - C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions (L x W x H): 2,588 x 1,150 x 1,765 mm Center height: 1,040 mm Weight: 3,500 kg SCOPE OF OFFER Includes (not exhaustive): - Star ECAS 12 CNC automatic lathe Gujdpfxswf Acle Ah Djh - Coolant tank / pump - High-pressure unit - Transformer - Operating documentation Exact scope of supply as per photo documentation No guarantee is given regarding the accuracy, completeness, or currentness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, TECHNICAL DATA Axis Data Rapid Traverse: X, Y, Z, ZB, XB: 35,000 mm/min C: 198,000 °/min (550 rpm) Maximum Feed Rate: X, Y, Z, ZB, XB: 10,000 mm/min C: 10,000 °/min (27.8 rpm) Smallest Input Unit: X, Y, XB: 0.001 mm / 0.0001 in (diameter) Z, ZB: 0.001 mm / 0.0001 in C: 0.001° Machining Capacity Maximum Machining Diameter: Ø16 mm (5/8 in) Maximum Headstock Stroke: Fixed Guide Bushing: 205 mm (8 in) Rotary Guide Bushing: 155 mm (6–3/32 in) Rotary Magic Guide Bushing: 155 mm (6–3/32 in) Maximum Drilling Capacity: Driven Tool: Ø6 mm (15/64 in), Ø4 mm (5/32 in) Maximum Tapping Capacity: Driven Tool: M5×P0.8, M3×P0.5 Maximum Milling Capacity: Ø10 mm (25/64 in), Ø7 mm (9/32 in) Maximum Thread Cutting: M8×P1.25 Machine Configuration Mode of Operation: Machining station right Configuration: Integrated mechanical/electrical construction Guodswvap Rspfx Ah Doh Dimensions (L×W×H): 1861 × 1060 × 1750 mm Spindle Height: 1060 mm Weight: approx. 1700 kg Main Spindle Spindle Speed: max. 10,000 rpm Speed Control: S-command + direct 5-digit command Main Spindle Drive: 2.2 kW (continuous duty) 3.7 kW (15 min/60% DC) Indexing: 15°, 1° Tool Combinations Various combinations with 1–3 spindles for tools Ø12 mm, Ø10 mm or Ø6 mm Tool holders for ER11 or ER16 Drill Holder Number of Tools: 4 Max. Speed: 5,000 rpm (ER16), 7,500 rpm (ER11) Drive Motor: 0.4 kW Tool Selection: Servo motor Backworking Max. Chuck Diameter: Ø16 mm (5/8 in) Max. Part Length: 80 mm Max. Rear Spindle Travel: 30 mm Max. Parts Ejection Length: 50 mm Spindle Speed: max. 8,000 rpm Spindle Drive: 100 W AC servo motor Tools: 4-spindle unit Max. Drilling Capacity: Ø8 mm (5/16 in) Max. Tapping Capacity: M6 × P1.0 SCOPE OF SUPPLY Includes (not an exhaustive list): - STAR SB-16D CNC Swiss-Type Automatic Lathe - Fire extinguishing system - Coolant tray - LNS Tryton-112 bar feeder - High-pressure pump - Machine accessories - Bar feeder accessories Complete operating documentation Exact scope of delivery according to photo documentation

Stanje: dober (rabljeno), Leto izdelave: 2001, Tsugami BS12-III CNC Swiss-Type Automatic Lathe TECHNICAL SPECIFICATIONS Turning diameter: 3–12 mm Turning length: 170 mm Max. drilling diameter: 7 mm Max. internal thread diameter: M6 Spindle speed: 12,000 rpm Counter spindle speed: 6,000 rpm Number of axes: 6 Dimensions (L x W x H): approx. 190 x 130 x 220 mm Weight: 2,200 kg Gedpfxsq H Ea Uo Ah Djuh No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: dober (rabljeno), STAR SV-20 CNC Automatic Lathe TECHNICAL DATA OF CONTROL AXES Rapid traverse X, Y: 15,000 mm/min Rapid traverse A, B: 15,000 mm/min Rapid traverse Z1, Z2, E: 18,000 mm/min Rapid traverse C: 90,000°/min Gujdpsiq Dp Nofx Ah Doh Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. headstock stroke: 205 mm Max. drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. tapping capacity: Stationary: M10 x P1.5; Driven: M6 x P1.0 MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for front ejection: 150 mm Max. part release length: 75 mm Sub spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2,670 x 1,375 x 1,650 mm Weight: 3,400 kg No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), PBR T35SNC x 3000 CNC Cycle Lathe Year of manufacture: 1997 Control: Fagor Centre distance: 3000 mm Max. turning diameter: 630 mm Centre height over bed: 300 mm Centre height over cross slide: 165 mm Gusdpfx Asil Hzzjh Djh Spindle bore: 105 mm Speed: 2000 rpm Weight: 6200 kg Accessories included: Multifix set (without tool holders), chuck (see photos) + additional chuck. No guarantee is given for the correctness, completeness and up-to-dateness of the information provided.

Stanje: zelo dobro (rabljeno), STAR SR-20R Swiss-Type Automatic Lathe TECHNICAL DATA Spindle bore: 20 mm Turning length: 205 mm Spindle speed range: 500 – 12,000 rpm Spindle motor power: 2.2 / 3.7 kW X-axis travel: 265 mm Counter spindle speed range: 500 – 8,000 rpm Counter spindle motor power: 1.5 / 2.2 kW Gujdpfx Aou Hkh Rsh Doh C-axis: 0.001° 19 tool positions: linear tool holders, front tool post, backwork machining SCOPE OF SUPPLY Includes (but is not limited to): - STAR SR-20R Swiss-type automatic lathe - LNS bar feeder - Transformer - Coolant pan - Exact scope of delivery as per photo documentation We do not assume liability for the accuracy, completeness, or timeliness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, STAR ECAS-32T CNC Lathe TECHNICAL DATA Max. Machining Diameter: 32 mm Max. Headstock Travel: 350 mm Tool Post: First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools per station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools per station Max. Drilling Capacity: 23 mm Max. Tapping Capacity: M12 x P1.75 Max. Die Cutting Capacity: M12 x P1.75 Power Driven Attachment: Number of Tools: Max. 2 tools per single station Max. Drilling Capacity: 10 mm Gjdpfx Ahsu Hkg Ts Douh Max. Tapping Capacity: M8 x P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm x 10 mm Main Spindle Min. Indexing Angle: 0.01° Main Spindle Speed: 7,000 rpm Power Driven Attachment Spindle Speed: 5,700 rpm Coolant Tank Capacity: 230 l Dimensions (L x W x H): 3,175 x 1,745 x 1,860 mm Center Height: 1,084 mm Weight: 5,700 kg Power Consumption: 8.0 KVA SCOPE OF SUPPLY Includes (not an exhaustive list): - STAR ECAS 32 CNC automatic lathe - Barloader - Siemens fire suppression system - Toolholder set - Chip tray and coolant pump - High-pressure pump - Transformer Exact scope of supply according to photo documentation. We do not assume any liability for the correctness, completeness, or up-to-dateness of the information provided.

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), TORNOS DECO 2000 CNC Lathe TECHNICAL DATA Dimensions and Weights Dimensions: Length: 2000 mm Width: 1260 mm Height: 1950 mm Weight: Empty: 2550 kg Specific floor loading: Approx. 8 daN/cm² Axes 1 movable headstock: Z1, S1 2 independent linear tool systems on vertical slides: X1 / Y1 (S6) – X2 / Y2, S2 1 front tooling unit, 4 spindles: X3 / Z3 1 independent pickup spindle: Y4 / Z4, S4 1 independent tool system for rear machining: X4 (S5) Gujdpfx Aemdn Imsh Deh General Data Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Maximum workpiece length: With rotating guide bushing: 180 mm Operation in collet: 30 mm Main spindle speed: 12,000 rpm Spindle rotation direction: Preferably: right-hand Main spindle motorization: Continuous duty: 2.2 kW Intermittent duty: 3.7 kW Pickup spindle motorization: Continuous duty: 1.5 kW / Intermittent: 2.2 kW Headstock collet type: F20 Guide bushings: Rotating, fixed Guide bushing collet type: Meister: 605 Number of tools for main operation: Fixed: 2 x 5 / Driven: 3 + 3 Number of front tools: Fixed: 4 / Driven: 3 Tool cross-section: 12 x 12 mm Tool collets: Rotating standard: ESX 20 Number of tools in rear machining: Fixed: 3 + 3 / Driven possible: 3 + 3 Bar loader: Yes Parts removal: Basic version Machine type: Sliding headstock Machine axis height: 1100 mm Headstock travel: 255 mm Barloader position: Right of operator Bar capacity: 1–16 mm Telescopic tube bore: 6–17 mm Spindle speed: Left / right: -12,000 to 12,000 rpm Headstock feed rate: Max. 20 m/min No liability is accepted for the correctness, completeness, or up-to-dateness of this information.