Navpična stružnica - enojni stolpec

DÖRRIES CTE 320/3400

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (preloaded roller guides), with Y-axis on main and counter spindle - Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main Spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter Spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Turret: • 12-position VDI 30 turret, radial, with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel: +/- 40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • SINUMERIK ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant detection • USB interface • Control cabinet air conditioning • Coolant system incl. coolant pump (3.5 bar) • Chuck wash (additional pump, 3.5 bar) • Parts ejector and coolant through counter spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring / SINUMERIK ONE Psdpjx E Dncofx Aczepl Alternating spindle speed Counter spindle as tailstock: Enables the use of the counter spindle with installed live center for workpiece support. This allows shaft parts to be supported and machined, even on machines without a tailstock, using the counter spindle. Maximum thrust force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for connecting robots (HARTING connector, Profinet communication, dual-channel/potential-free safety signals). Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE interface for connection to MDE/BDE systems. Standard features include: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D machine data model included Pneumatically operated finished part catcher for gentle unloading of finished parts: Finished parts are transported either to a catch box (standard) or conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the SL1200 short bar feeder from EMCO. ...and more. Machine is available immediately!

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: nepreverjeno, številka stroja/vozila: 73136, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 720 mm, nazivna (navidezna) moč: 64 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, skupna višina: 3.150 mm, skupna dolžina: 5.605 mm, skupna širina: 4.290 mm, skupna masa: 12.600 kg, hitrost vretena (min.): 15.000 obr/min, delovne ure vretena: 21.786 h, število mest v zalogovniku orodij: 46, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (read): Control on: approx. 112,194 h Machine on: approx. 72,272 h Spindle on: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with typical signs of wear, technically functional. Inspection under power possible by arrangement. Working Areas Travel paths: X-axis: 1350 mm Y-axis: 1150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration time to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur-St Lubrication: Lifetime-lubricated Cooling: Water with corrosion protection Feed Drives Feed motors: AC Rapid traverse/Working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle per hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) Location bore: Ø 50 H6 Clamping torque: 8000 Nm Max. moment of inertia: 75 kg·m² Table stroke above floor: 1120 mm Table drive: Torque motor, direct Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm fully equipped Psdpfx Acsx Eh Iqszjpl 130 mm partially equipped Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Chip-to-chip time (vertical): 11 s Coolant / Chip Removal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed nominal power: 75 kW Power connection: 58 kW Connection rating: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Space requirement (L × W × H): 5605 × 4290 × 3150 mm

Stanje: dober (rabljeno), premer brušenja: 1.600 mm, dolžina brušenja: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 hydrostatic steady rests Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Centre height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Dimensions (approximate): Psdsvvvw Espfx Aczspl Length: 15100 mm Width: 5500 mm Height: 3550 mm Weight: 120,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size Psdpfovdal Asx Aczepl 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer Ppjdoul Efmspfx Aczel - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS 32 C Ppedpouhaqbsfx Aczjl

Stanje: dober (rabljeno), Leto izdelave: 1989, skupna višina: 6.450 mm, For sale: Beche short-stroke drop forge hammer KGH 4B. Machine weight: 65 t Working capacity: 40 kJ Max. blow frequency: 98 rpm Max. usable blows per minute: 41 Max. ram stroke: 790 mm Podpfert Uc Eox Aczspl Machine is dismantled Technical specifications available on request

Stanje: novo, Sheet width: 2050 mm Sheet thickness: 3 mm Frame gap: 2100 mm Backgauge – adjustable: 600 mm Connected load: kW Machine weight approx.: 1.1 t Dimensions (L x W x H): 2.7 x 2.1 x 1.4 m The machine operates quietly and, thanks to its geared motor with brake system, is energy efficient. Our machine is constructed as a monoblock body, welded from ST42 quality material. The machine’s blades are made from 2379 grade material, manufactured by BOHLER. These high-quality blades ensure precise cutting. Emergency stop button, foot switch, and finger protection grid are included as standard equipment. (Documentation available in English only) Ppodpfx Acefv H Dkszjl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, skupna masa: 35.000 kg, stiskalna sila: 250 t, vrsta vhodnega toka: trifazni, moč: 30 kW (40,79 KM), prebijalna sila: 250 t, vhodna napetost: 200 V, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Clearance Over Table: (adjustable) 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optional with Decoiler and Straightener. Ppjdpou Dxb Tjfx Aczjl

Stanje: dober (rabljeno), Leto izdelave: 1992, 1 used surface grinding machine Manufacturer: ELB Model: SUPER - RUBIN 024 CNC Year of manufacture: 1992 Travel paths: Grinding length: 600 mm Grinding width: 275 mm Grinding height: 375 mm Table clamping surface: 900 x 300 mm Pjdpfxsi Ra Tyo Aczspl Table load capacity: 300 kg Vertical feed: max. 300 mm/min Cross feed: max. 2,000 mm/min Control system: UNICON Grinding wheels are included in the scope of delivery, see photos.