Ultimax nakup rabljenega (86)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Machining center with high stability, also suitable for rough milling. The control system offers both plain text and ISO programming. Technical Data: Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm Drive power: 30 kW Spindle speed: 15,000 rpm Spindle taper: SK 40 type B Feed rate: up to 23 m/min. Work Table: Dimensions 1,500 mm x 660 mm Max. workpiece weight 1,300 kg Control System: Hurco Ultimax 4, incl. milling simulation software electronic hand pendant RS 232C / V24 interfaces 2 screens for processing text and graphics 2 software modules for plain text and ISO programming Machine Construction: high rigidity, also suitable for roughing operations Tool Changer: Kedpfxevrq Aze Ah Dsnc double-arm gripper with 24 stations Equipment: cooling unit for milling spindle internal coolant supply, ICS 20 bar flushing system for chip removal splash guard enclosure coolant system with filtration chip conveyor Machine Data: Space requirement (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm Weight approx. 9,000 kg Connected load 50 kVA, 400V, 50/60 Hz The machining center is fully operational. Inspection with power and cutting under appointment is possible. All tools and operating materials visible in the photos are not part of the machine's scope of delivery. Technical modifications and errors excepted.

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), TECHNICAL DATA Travel X-axis: 760 mm Travel Y-axis: 510 mm Travel Z-axis: 610 mm Table clamping surface: 1020 x 510 mm T-slots / table: 5 x 18 mm x 100 mm Distance spindle to table min./max.: 150/762 mm Spindle taper: steep taper DIN 69871 ISO 40 Spindle speeds: 10 – 10,000 rpm Drive power (30 min/continuous operation): 11 kW Max. torque: 236 Nm Constant power from: 500 rpm Coolant tank: 190 l Linear guides with ball bearings in X, Y, Z axes Rapid traverse X / Y / Z: 30 / 30 / 20 m/min Feed rates programmable: 3.0 - 7,600 mm/min Positioning accuracy: +/- 0.01 mm Repeatability: +/- 0.005 mm Milling feed: 3.0 - 11,400 mm/min Table load: 1,000 kg Automatic tool changer (double arm): 24 stations Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 7 kg Machine weight: 4,700 kg Required space L x W x H (footprint): 3,870 x 4,170 x 2,775 mm Knsdpfx Ajl Tpmdjh Doc INCLUDES: • Coolant system • Coolant spray gun • Chip splash guard enclosure • Flush system to aid chip removal • Machine light • Set of machine levelling pads • Rigid tapping • Spiral conveyor in chip chamber • Pocket milling with islands • Electronic handwheel • ULTIMAX 4 control unit • 2 VGA color screens (Text + Graphic) • 2 software packages (1 x conversational programming, 1 x ISO code programming) via RS-232 C / V24 interface, access for CAD/CAM or external programming station • Pentium technology, 1.6 GB hard drive, 64 MB RAM, parallel and serial data interfaces, DOS-compatible 3.5'' 1.44 MB disk drive. Internal system diagnostics, DOS directory structure, software version 2.xx, dual DSP 40 MHz servo technology.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Ultimax 3-4 control system, dual color displays (text + graphics) Travel distance X/Y/Z: 1020/510/610 mm Spindle speed: 8,000 rpm Tool magazine for 24 tools, SK 40 DCF software Knsdpfx Ahowzy N Is Djc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M342-06209041AFA, potovalna razdalja osi X: 760 mm, pomik osi Y: 510 mm, pomik po osi Z: 610 mm, model krmilnika: Ultimax3, največja hitrost vretena: 8.000 obr/min, Oprema: dokumentacija / priročnik, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis travel: 760 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Spindle Speed: 8,000 rpm Control: Ultimax3 MACHINE DETAILS Dimensions & Weight Dimensions: 2,600 x 2,300 x 2,800 mm Weight: 5,000 kg Taper: ISO 4 EQUIPMENT Clamping mechanisms by Kastr MU7 Vihorlat brand vise Milling cutters with tapers Kedew E El Nspfx Ah Djnc Note: Axis no. 4 shows an error upon startup, but this message does not appear after a subsequent restart.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 704-0101-809, potovalna razdalja osi X: 800 mm, pomik osi Y: 700 mm, pomik po osi Z: 510 mm, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 32, kot vrtenja osi C (maks.): 360 °, TECHNICAL DETAILS Control: ULTIMAX 4 X-axis: 800 mm Y-axis: 700 mm Z-axis: 510 mm Rapid traverse (X/Y/Z): 35 m/min A-axis: ± 30° / 110° Rapid traverse A-axis: 16.5 m/min C-axis: 360° Rapid traverse C-axis: 16.5 m/min Spindle Speed range: 10 – 12,000 rpm Spindle motor: 18 kW Tool Tool holder: SK 40 Tool stations: 32 Working area Max. table load: 300 kg Table size: 610 mm x 5 mm x 5 mm MACHINE DETAILS Machine weight: 12,500 kg Knjdpfx Aexamfkeh Dsc Required space (LxWxH): 2,700 m x 4,000 m x 3,250 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.020 mm, pomik osi Y: 510 mm, pomik po osi Z: 610 mm, nazivna (navidezna) moč: 25 kVA, model krmilnika: Ultimax 4, širina mize: 1.220 mm, dolžina mize: 510 mm, hitrost vretena (min.): 80 obr/min, največja hitrost vretena: 8.000 obr/min, število mest v zalogovniku orodij: 24, montažni premer: 40 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, CNC milling machine Hurco BMC 4020 Control: Ultimax 4 Travel: X 1,020 mm, Y 510 mm, Z 610 mm Clamping area: 1,220 x 510 mm Tool stations: 24 pcs, SK40 Spindle speed: 80–8,000 rpm Coolant system If interested, please feel free to contact us. Kodpewa T Injfx Ah Denc

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: B3M92212078CC, CNC vertikalni obdelovalni center HURCO tip BMC 30/M Leto izdelave 1998 CNC krmilni sistem poti Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Miza 1010 x 400 mm Vreteno SK 40 Razdalja med vretenom in mizo 150 - 760 mm Iztegnjenost 450 mm Hitrost vretena 80 do 8000 o/min brezstopenjsko Hitri pomik 24 m/min Pogon vretena 7,5 kW pri 30 min / 5,5 kW pri 100% Električni priklop 400 V, 50 Hz - CNC krmilni sistem poti Ultimax 3 (z nadgradnjo strojne opreme, npr. TFT monitorji) - Elektronski ročni upravljalnik Kjdpfx Ahew Tdius Dsnc - Indirektni merilni sistem z rotacijskimi dajalniki na krogličnem vretenu - Menjalec orodij z 24 mesti za orodja - Popolna zaščitna kabina / drsna vrata - Zavrtljiv upravljalni pult - Pnevmatski mehanski vpenjalnik orodja Dimenzije D x Š x V 3400 x 2400 x 2550 mm Teža cca 4.800 kg Dobra stanje

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 1270mm/660mm/610mm, spindle speed: 10,000 rpm, max. table load: 3,000 kg, spindle taper: CAT40, tool stations: 40. Machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9,000 kg, control: Ultimax. Documentation available. On-site inspection possible. Kedpsuzyafsfx Ah Denc

Leto izdelave: 2003, Stanje: zelo dobro (rabljeno), Control: Ultimax Knjdpfx Asitk I Ush Doc Tool holder: SK40 Table size: 1270 x 610 mm Travel paths: X - 1060 mm; Y - 610 mm; Z - 610 mm Spindle speed: 10,000 rpm 40-position tool changer Internal coolant supply (IKZ) Chip conveyor Accessories: 2 hydraulic machine vices, various tool holders

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1999, dolžina podajanja os X: 760 mm, dolžina pomika po osi Y: 430 mm, dolžina podajanja os Z: 500 mm, Ultimax 3 with 4th axis BT 40 spindle Spindle speed: 8,000 rpm Travel: 760 x 430 x 500 mm Knsdpfsvgbrvex Ah Dec 24-position tool changer Table size: 860 x 508 mm

Stanje: rabljeno, Leto izdelave: 2004,

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 24.287 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H-H5022, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 660 mm, pomik po osi Z: 610 mm, model krmilnika: Ultimax, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 40, TECHNICAL SPECIFICATIONS Control: Hurco Ultimax Travel X-axis: 1,270 mm Travel Y-axis: 660 mm Travel Z-axis: 610 mm Spindle speed: 12,000 rpm Power: 15 kW Torque: 238 Nm Tool Magazine Tool magazine capacity: 40 stations Tool holder: SK40 Tool diameter: 75 mm Tool length: 300 mm Tool weight: 10 kg Table and Workholding Clamping area: 1,500 x 660 mm T-slots: 6x 18 x 1,000 mm Max. table load: 1,300 kg Distance spindle to table: 150 - 760 mm Rapid Traverse Rapid traverse X: 30 m/min Rapid traverse Y: 30 m/min Rapid traverse Z: 20 m/min MACHINE DETAILS Dimensions: 3,250 x 2,350 x 2,950 mm Weight: 9 t EQUIPMENT - Chip conveyor - High-pressure coolant system with filter - Tool measurement: Laser, BLUM - Probe interface prepared - Electronic handwheel Knjdju Dairspfx Ah Djc - Spindle cooler

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, 3-axle MULTIMAX *PLUS low-loader semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Gross weight: 49,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Neck length approx.: 3,900 mm Neck width approx.: 2,480 mm King pin steering radius to rear approx.: 2,100 mm Saddle height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: * Loading platform width approx.: 2,540 mm Deck height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm *Gross weight depending on fifth wheel load: Yes Special permit required if country-specific regulations are exceeded. Technical description: Gooseneck: Gooseneck in SNT design for optimized load bed length, length approx. 3,900 mm, rear sloped approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Load platform: Load platform, length approx. 9,600 mm with rear slope approx. 900 mm x 6°. Section of platform after the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, length approx. 4,920 mm, width approx. 900 mm. Open grating surface. Hydraulically folding ramp tips. Each ramp hydraulically adjustable sideways approx. 235 mm outward and approx. 365 mm inward. Maximum load and approach angle according to technical data sheet C470319. Maximum ramp angle with lowered load platform: 9°. Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Axle tools included. Tyres: 235/75 R 17.5 3PMSF twin tyres. Manufacturer at our discretion. Load index 143/141J (144/144F). Brake system: WABCO EBS-E braking system according to EU regulations. Without connection cable to tractor unit. Lighting: 24-volt lighting system "ASPÖCK-NORDIK full LED" version in accordance with EU regulations (ASS 3). Metallisation: Complete HRM metallisation (High Resistance Metallisation). Entire steel structure shot-blasted, then hot-finish coated with ZINACOR 850 (Zinc 85% - Alu 15%). 6-coat painting finish: Whole steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Final painting with 2 coats of two-component acrylic paint in a single RAL colour of choice, then cavity sealing with special wax. Ksdpfx Aheizu Ntj Dsnc Rims in silver. Multi-colour and special paint at extra charge. Steel construction: Made from high-tensile fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Welders certified to DIN-EN 287-1. Welding procedure: MAG according to EN ISO 4063. Shielding gas M21 according to EN ISO 14175. Front bulkhead made of steel, removable, approx. 400 mm high. Supply line junction box for tractor unit mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin assignment differs from the ISO standard, please inform us. Anderson socket at the front connection bar. (Rema 78051-00 & Amp. 150 V.) Cable for powering the electro-hydraulic unit and/or the electric cable winch (35 mm²,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Travel X/Y/Z: 610mm/508mm/610mm, Rapid traverse X/Y/Z: 35m/min / 35m/min / 30m/min, Feed rate: 7600mm/min, Table dimensions X/Y: 760mm/510mm, Max. table load: 700kg, Tool holder: SK40, Tool stations: 24, Spindle speed: 10,000rpm, Power: 7.5kW. Machine dimensions X/Y/Z: approx. 2200mm/2400mm/2500mm, Weight: approx. 5000kg, Control: Ultimax 4. Documentation available. On-site inspection possible. Knodpfowpu Ihsx Ah Dec

Leto izdelave: 2003, Stanje: zelo dobro (rabljeno), Control: Ultimax Tool holder: SK40 Kodpfxoitk Ncs Ah Denc Table size: 1020 x 510 mm Travels: X - 760 mm, Y - 510 mm, Z - 610 mm Spindle speed: 10,000 rpm 24-position tool changer Internal coolant supply (IKZ) Accessories: 2 hydraulic machine vices, various tool holders

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Hurco VMX 42, year of manufacture 2005, Nikken 5-axis table X travel: 1060 mm Kodpfxow Al Hzj Ah Denc y travel: 610 mm z travel: 610 mm Control: Ultimax 4 Spindle speed: 10 – 10,000 rpm (operator states 12,000 rpm) Tool holder: SK40 Tool magazine: Drum-type magazine with 40 stations Feed rate XYZ: 3 – 7,000 mm/min Rapid traverse XY: 30 m/min Rapid traverse Z: 20 m/min Table size: 1220 x 510 mm Table load capacity: 1.1 t

Stanje: dober (rabljeno), Leto izdelave: 2003, HURCO VMX 42 MACHINING CENTER YEAR: 2003 CNC: HURCO UltiMAX 4 Table: 1,270 x 610 mm Travel: X Axis: 1,070 mm Y Axis: 610 mm Z Axis: 610 mm Spindle: ISO 40 DIN 69871 Speed: 10,000 rpm Power: 18 kW Ksdpsuih Nbjfx Ah Denc Tool magazine: 24 stations Equipped with chip conveyor Assorted tool holders included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Control system Ultimax 4 Knedpfst Rubbox Ah Dsc Travel X/Y/Z: 760 x 510 x 610 mm Table size: 1020 x 510 mm Spindle speed: 12,500 rpm Tool magazine for 24 tools, SK 40

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, You are bidding on a Hurco Winmax V9 package, suitable for Ultimax 4 machines from year of manufacture 2006 onwards. The package has been properly uninstalled and can be reinstalled on any Ultimax machines from 2006 onwards. The price includes hardware and on-site installation. All prices are exclusive of VAT. Knodpstu Uc Eefx Ah Doc We have further options in stock, also for Winmax machines. We are happy to assist you with installation. Please get in touch with us. No longer receiving service for your used Hurco milling machine? No problem! We offer service and retrofits for ALL Hurco milling machines, regardless of year of manufacture.

Stanje: pripravljen za uporabo (rabljen), Na voljo je flotacijska posoda Schulz za odstranjevanje finih suspendiranih delcev pri proizvodnji piva. Premer: pribl. 2880 mm, višina: pribl. 2000 mm, prostornina: pribl. 13.000 l. Zaradi pomanjkanja prostora je mogoče rezervoar odpeljati le v dveh delih. Ogled na lokaciji je možen. Ksdow Na Hnspfx Ah Djnc

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 610 mm Kjdsvh Nbuopfx Ah Donc y-axis travel: 405 mm z-axis travel: 510 mm Table clamping surface: 760 x 400 mm Spindle taper: SK 40 Spindle speeds – stepless: 80 – 8000 rpm Spindle motor: 7.5 kW Maximum spindle torque: 142 Nm Feed rates: 3.0 – 7,600 mm/min Rapid traverse (longitudinal/cross/vertical): 24 / 24 / 15 m/min Distance table / vertical milling spindle max.: 600 mm Table load capacity: 350 kg Number of tool magazine positions: 24 Tool diameter with full magazine: 80 mm Maximum tool length: 300 mm Maximum tool weight: 6.8 kg Control: ULTIMAX SSM Total power requirement: 18 kVA Machine weight approx.: 4.1 t Accessories: 2 SK 40 tool holders, RÖHM 3-jaw chuck, chip conveyor, coolant system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Hurco VMX 42, year 2007, Nikken 5-axis table X-travel: 1,060 mm y-travel: 610 mm z-travel: 610 mm Control: Ultimax 4 Spindle speed: 10 – 10,000 rpm (operator states 12,000 rpm) Tool holder: SK40 Tool magazine: Drum magazine with 40 stations Feed rate (XYZ): 3 – 7,000 mm/min Kedjw Al Huspfx Ah Donc Rapid traverse (XY): 30 m/min Rapid traverse (Z): 20 m/min Table size: 1,220 x 510 mm Table load capacity: 1.1 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, potovalna razdalja osi X: 1.625 mm, pomik osi Y: 860 mm, pomik po osi Z: 760 mm, največja hitrost vretena: 8.000 obr/min, Control: Ultimax 4 Travel paths X/Y/Z: 1625/860/760 mm Spindle speed: 8000 rpm Knsdpfxsra Idhs Ah Djc Tool magazine for 40 tools, SK 40 taper Internal coolant supply (IKZ) Chip conveyor

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), A Hurco CNC 3-axis milling machine is available. Travel range X/Y/Z: 760mm/510mm/610mm, table dimensions X/Y: 1020mm/510mm, max. table load: 1360kg, spindle speed: 10,000 rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control: Hurco Ultimax, spindle hours: approx. 10,500h. Documentation is available. An on-site inspection is possible. Kedpfsw Dfg Dsx Ah Donc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 620 h, Pomiki X/Y/Z: 1630mm/860mm/760mm, hitrost vrtenja: 8000obr/min, navor: 142Nm, moč: 15kW, število orodnih mest: 40, maksimalni premer orodja: 75mm/127mm, maksimalna dolžina orodja: 300mm, maksimalna masa orodja: 10kg, mere mize X/Y: 1680mm/890mm, maksimalna obremenitev mize: 2700kg. Dimenzije stroja X/Y/Z: pribl. 6400mm/4400mm/3300mm, teža: pribl. 14500kg, krmiljenje: Hurco Ultimax 4, delovni čas: pribl. 621h. Dokumentacija na voljo. Ogled na lokaciji možen. Predvidoma na voljo od sredine 2026. Knjdew Dfhzepfx Ah Dec