Obdelovalni center

Hurco VMX 50

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, The machining center has been inspected by a Hurco technician and declared fully functional without any faults. Technical specifications - Travel: X-axis 1,270 mm, Y-axis 600 mm, Z-axis 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40, Type B - Feed speed: up to 23 m/min Worktable: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control system: - Hurco Ultimax 4, incl. software for milling simulation - Electronic hand control panel - Interfaces: RS 232C / V24 - 2 monitors for text and graphic editing - 2 software units for plain text and ISO programming Machine construction: - High rigidity, also suitable for roughing Tool changer: - Double-arm gripper with 24 stations Equipment: - Cooling unit for milling spindle - Flushing system for chip removal - Splash guard enclosure - Coolant system with filtration - Internal coolant supply (ICS) 20 bar - Chip conveyor Machine data: - Required floor space (excluding service areas) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400 V, 50/60 Hz A viewing of the machine can be arranged by appointment. Gbodpfxjx Iikbo Ahmon All tools and operating equipment shown in the photos are not included in the scope of delivery. Technical modifications and errors excepted.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Godpfx Ahsx Hgl Homjbn Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2003, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 660 mm, pomik po osi Z: 640 mm, krmiljenje Ultimax nov vreteno BT 40 v letu 2020 hitrost 10.000 obratov hodi 1270x660x640 mm menjalnik za 24 orodij odvajač ostružkov Gjdpfxsxu Ikqe Ahmsbn

Stanje: zelo dobro (rabljeno), Hurco VMX50i (2014) 3-osni vertikalni obdelovalni center Krmiljenje: Hurco WinMax Pomiki in zmogljivost Pomik osi X: 1270 mm Pomik osi Y: 660 mm Pomik osi Z: 610 mm Velikost mize: 1500 x 660 mm Gsdpfx Ahsyx H Rtomjbn Največja nosilnost mize: 2000 kg

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Godpfx Ahowx Rafjmjbn Y 400 mm Z 500 mm 10.000 vrt/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 47.627 h, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 650 mm, pomik po osi Z: 610 mm, proizvajalec krmilnikov: HURCO, največja hitrost vretena: 12.000 obr/min, število osi: 3, Táto 3-osá Hurco VMX50S bola vyrobená v roku 2005. Ponúka pôsobivé pojazdy 1270 mm v osi X, 650 mm v osi Y a 610 mm v osi Z. Stroj je vybavený maximálnou rýchlosťou vretena 12 000 ot./min a riadiacim systémom Ultimax 4. Ak hľadáte vysoko kvalitnú frézku, mali by ste zvážiť vertikálne obrábacie centrum VMX50S od spoločnosti Hurco, ktoré ponúkame na predaj. Kontaktujte nás pre viac informácií. Gbedpfx Aey Sg Npjhmen • Najväčší motor: 32 kVA • Plné zaťaženie: 51 kVA • Výkonová odpínacia schopnosť: 10 000 A • Prívod elektrickej energie: 400 V / 3 fázy / 50 Hz Dodatočné vybavenie • Voliteľný dopravník triesok • 2 farebné monitory, odnímateľný elektronický ručný ovládač, vreckové frézovanie s ostrovmi, synchronizované rezanie závitov, príprava na 4. os

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Hurco VMX 50 T, letnik 2008, krmilje Winmax, menjalec orodij za 40 orodij, visokotlačno hlajenje IKZ, hitrost vretena do 12.000 o/min, transporter za ostružke, simulacijska grafika, žep z otoki, sinhroni rezkar za navoje, heliks, 3D opcija, NC / dialog mešanica, izbira površin, optimizacija menjave orodij, baza podatkov orodij in materialov, X-os verjetno poškodovan ležaj. Gsdpey T Iwqjfx Ahmjbn

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) Godpfx Ahsifn N Nemebn CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 660 mm, pomik po osi Z: 610 mm, proizvajalec krmilnikov: HURCO, model krmilnika: WINMAX, skupna višina: 3.240 mm, obremenitev mize: 2.000 kg, skupna masa: 7.950 kg, največja hitrost vretena: 12.000 obr/min, teža orodja: 7.000 g, število osi: 3, This 3-axis Hurco VMX50i was manufactured in 2021. It is equipped with a robust SK40 spindle capable of speeds up to 12,000 rpm and features a large table measuring 1500 x 660 mm that can support up to 2000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverses of 32/32/24 m/min, it is ideal for dynamic machining tasks. The machine includes an automatic tool changer with 30/40 positions. Please contact us for further information on this machine. Gbjdpfsx D E Acsx Ahmsn • Spindle nose to table: 101-711 mm • Table working area (W x D): 1500 x 660 mm • Table T-slots (DIN 650): 6 x 18 x 100 • Automatic Tool Changer (ATC) positions: 30/40 • Machine condition: Powered on and in operation • Total machine hours: 6700 Additional equipment • Chip conveyor • Mist separator • External coolant tank with filtration for internal tool cooling • Includes workpiece and tool probes • DWG/DXF programming extensions Dimensions Machine depth: 5059 mm

Stanje: dober (rabljeno), Leto izdelave: 2003, X-travel: 1270 mm Y-travel: 660 mm Gedpfoiv R Hljx Ahmsbn Z-travel: 610 mm Control system: Ultimax 4 Table load capacity: 1300 kg Spindle speed: 10,000 rpm Tool changer: 24 positions Tool holder: SK 40 Drive power: 15 kW Table size: 1500 x 660 mm Total power requirement: kW Machine weight approx.: 9 t Space requirements approx.: 4.8 x 4.5 x 2.95 m

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Gbsdpfx Ahsxmagujmjn Distance from spindle nose to turret face: 115 – 690 mm Spindle speed range – main spindle: 35 – 4,000 rpm Drive power – main spindle: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum bar capacity: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range – driven tool positions: 25 – 4,500 rpm Drive power – driven tool positions: 3.7 kW Maximum torque: 35 Nm Speed range – sub-spindle: 35 – 4,000 rpm Drive power – sub-spindle: 7.5 kW Maximum torque: 57 Nm Maximum chuck diameter: 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub-spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 – 5,000 mm/min Feed range C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC turning and milling center MAZAK – Super Quick Turn 250 MS - Main and sub-spindle - Driven tools - C-axis

Stanje: rabljeno, Leto izdelave: 2021, x-hod 1270 mm y-hod 660 mm z-hod 610 mm Teža stroja pribl. 8680 kg 12000 obr/min Gbjdpfey Nfabsx Ahmon

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H-5070, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 660 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 20 m/min, dolžina podajanja os X: 1.270 mm, dolžina pomika po osi Y: 660 mm, dolžina podajanja os Z: 610 mm, proizvajalec krmilnikov: Hurco, model krmilnika: Ultimax, dolžina obdelovanca (maks.): 1.500 mm, širina obdelovanca (maks.): 660 mm, teža obdelovanca (maks.): 1.300 kg, širina mize: 660 mm, dolžina mize: 1.500 mm, obremenitev mize: 1.300 kg, največja hitrost vretena: 10.000 obr/min, nosilec vretena: MK 4, število mest v zalogovniku orodij: 20, Oprema: dokumentacija / priročnik, transportni trak za ostružke, We offer this ready-to-use Hurco VMX50 vertical machining center, year of manufacture 2006. Manufacturer: Hurco Model: VMX50 Year of manufacture: 2006 CNC milling machine Hurco VMX 50 | YOM 2006 | SK40 | Chip conveyor | Spare parts | For sale is a CNC machining center Hurco VMX 50 (year 2006). Godpoy Exu Rofx Ahmebn The machine is well-maintained, in good condition and immediately operational – ideal for workshops, contract manufacturers, or training centers. Technical Specifications Manufacturer: Hurco Model: VMX 50 Year of manufacture: 2006 Control: Hurco Ultimax Travel ranges (X/Y/Z): 1,270 / 660 / 610 mm Table size: 1,500 × 660 mm Table load capacity: approx. 1,300 kg Spindle: SK40, up to 10,000 rpm (depending on version) Rapid traverse (X/Y/Z): 30 / 30 / 20 m/min Tool changer: 20 positions IKZ (through-spindle coolant) available Coolant system: available Chip conveyor: available Scope of delivery / Features Including various spare parts LAN-capable thanks to WR Box Chip conveyor included on the machine Inspection under power possible Pick-up only – loading can be organized Price net plus VAT. Location: 93073 Neutraubling Mobile: +49 160 97215567 If you have any questions or require further information, please feel free to send us a message or give us a call.

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa Godpfjdkdi Tjx Ahmobn

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 660 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 20 m/min, obremenitev mize: 1.350 kg, največja hitrost vretena: 12.000 obr/min, Menjalnik orodij: 24 mest IKZ: 40 bar Tipalo: Renishaw Merjenje orodja: Renishaw Postavitvena površina (ŠxDxV) (vrata zaprta / brez krmiljenja/odvoda ostružkov): 3250 x 2220 x 2950 mm Godpfxjyx E Nnj Ahmobn Transportna teža: 8.900 kg