Ultimax nakup rabljenega (78)

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered Nwsdpfxjrgzv Ne Alioi * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) Nodpfotx Nwnjx Alijwi LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform Nwedoyhkqujpfx Aliji - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: novo, lastna masa: 1.630 kg, največja dovoljena obremenitev: 970 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.780 mm, širina tovornega prostora: 1.810 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 15,7 m³, barva: črn, gradbena višina: 2.680 mm, delovna širina: 2.290 mm, Hydraulics, automatic reversing device, hot-dip galvanization, * IMMEDIATELY AVAILABLE * Technical Data: - Type: New vehicle - MOT: New/2 years - Availability: IMMEDIATE! - Animal capacity: 2 - Permissible total weight: 1,630 kg - Unladen weight: 970 kg - Payload: 1,630 kg - Internal dimensions: 378 x 181 x 230 cm (L x W x H) - Overall external dimensions: 503 x 229 x 268 cm (L x W x H) - Brakes: yes - Jockey wheel: yes - Automatic with comfort handle - 100 km/h rating: Included! - incl. vehicle documents Body Construction: - Floor: ALUMINIUM floor - Sidewalls/body: Double-walled anodized aluminium - Roof material: Solid polyester - Colour: black - Tack room: Yes, large tack room - Tack room equipment: Luggage net, saddle racks, vanity mirror, bridle holders, lockable door, door retainer - Feed troughs: no, optional - Chassis: Pullman 2 independent wheel suspension with coil springs and shock absorbers - Height of partition bars: 106 to 127 cm, adjustable - Distance between partition bars: 173 to 205 cm, adjustable - Tailgate material: supports approx. 1000 kg, rubber with tread strips and anti-slip surface - Tailgate function: Combination of barn door and tailgate - Drain flap: no - Overrun device & brake: KNOTT - Lighting connector: 13-pin - Homologation: COC documents, registration with green license plate for sports purposes possible Standard Equipment: - Pullman2 chassis with independent wheel suspension and coil spring - incl. wheel shock absorber (100 km/h) - Aluminium floor - Aluminium walls - External tying points - Internal tying points - Stainless steel tie bar mounted on the right + suitable for feed troughs - Full-height ALU access door on the right + sliding window + aluminium handle, lockable - XXL indoor tack room with swivelling saddle rack - PVC clear partition wall - Single wheel mudguards, plastic (black) - Multiple sliding windows - Rubber bonded and sealed on the floor - Haynet hooks - Kick protection on sidewalls (GRP plastic) - Maneuvering handle - Roll-up tarpaulin net - Gas pressure damper lifting device on tailgate - Step on rear flap - 3rd brake light on rear flap - Lighting system with reversing light - 13-pin socket Available accessories – please inquire: - Protective cover for automatic jockey wheel - Anti-sway coupling - Downgrade to different gross weight - Alloy rims - Extended mirrors - Mounting aid - Bracket for saddle (KTL-coated) - Hanging feed trough with holder - Video monitoring system incl. reversing camera - Anti-theft device New vehicle with warranty and MOT. We are happy to offer you suitable financing options! Descriptions and images are copyright protected!! Over 800 trailers immediately available! We have been an authorized dealer and repair workshop for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Nationwide delivery within Germany available for an extra charge! Trailer Centre BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Nedpfsu Hrthsx Aliowi Errors, omissions and prior sale reserved.

Stanje: novo, lastna masa: 970 kg, največja dovoljena obremenitev: 1.630 kg, skupna masa: 2.600 kg, dolžina tovornega prostora: 3.780 mm, širina tovornega prostora: 1.810 mm, višina nakladalnega prostora: 2.300 mm, velikost pnevmatike: 185/65R14, 2-horse trailer from ChevalLiberte, model MULTIMAX. Large tack compartment with external and internal doors, aluminum walls, and aluminum flooring combined in a rot-proof aluminum horse trailer. Aluminum horse transporter for up to two horses with outstanding driving characteristics thanks to the Pullman2 chassis! The comfort suspension of the aluminum horse trailer is a proprietary development by Cheval Liberte. With a step height of just 45 cm, independent suspension, longitudinal control arms, coil springs, and shock absorbers, the ride comfort is second to none. Safe loading of horses is ensured by a gently sloping ramp, which can also be set up as a door, reducing the risk of injury during loading and unloading. In addition, pallets can be easily loaded, and the trailer is easier to clean thanks to the ramp/door system. The two-horse trailer is equipped with a foldable partition wall, tack compartment, poly dome roof available in various colors, aluminum walls, aluminum floor, entry door, ramp and door system, Pullman2 chassis, 100 km/h approval, interior lighting, automatic jockey wheel, sliding window, spare wheel, sturdy frame, and V-drawbar. Accessories for horse trailers such as external tie bars, feed buckets, drawbar cover, anti-theft device, and scratch mats are also available. The body is splash-proof. Nwsdpfx Asrxu S Relioi

Stanje: rabljeno, Leto izdelave: 2001, proizvajalec krmilnikov: Hurco, model krmilnika: Ultimax, _____ Opis: Vreteno: Tehnologija: Vreteno s pasom Število vrtljajev: 10.000 vrt/min Nastavek za orodje: SK40 Delovna miza: Površina za namestitev: 1.020 x 610 mm Splošno: Revija za orodja: 24 mest Hitri pomik v smeri X/Y/Z: 30/30/24 m/min Oprema/dodatna oprema: Nwsdpfx Aszng E Heliji Upravljanje z odrezki: Sistem za odvajanje odrezkov Upravljanje s hladilno tekočino: Sistem KSS Merjenje obdelovanca: Pripravljen vmesnik za merilno tipalo, Renishaw 4. os: Lehmann EA-410 Pripravljalna postaja: Elektronsko ročno krmiljenje Nosilci za orodja: Različni rabljeni nosilci za orodja SK40

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, The machining center has been inspected by a Hurco technician and declared fully functional without any faults. Technical specifications - Travel: X-axis 1,270 mm, Y-axis 600 mm, Z-axis 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40, Type B - Feed speed: up to 23 m/min Worktable: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control system: - Hurco Ultimax 4, incl. software for milling simulation - Electronic hand control panel - Interfaces: RS 232C / V24 - 2 monitors for text and graphic editing - 2 software units for plain text and ISO programming Machine construction: - High rigidity, also suitable for roughing Tool changer: - Double-arm gripper with 24 stations Equipment: - Cooling unit for milling spindle - Flushing system for chip removal - Splash guard enclosure - Coolant system with filtration - Internal coolant supply (ICS) 20 bar Nwjdpfx Alsx Iikbsisi - Chip conveyor Machine data: - Required floor space (excluding service areas) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400 V, 50/60 Hz A viewing of the machine can be arranged by appointment. All tools and operating equipment shown in the photos are not included in the scope of delivery. Technical modifications and errors excepted.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 610 mm, pomik osi Y: 510 mm, pomik po osi Z: 610 mm, - Krmiljenje Ultimax 4 - 24-kratni izmenjevalec - notranje dovajanje hladilne tekočine (IKZ) - spiralni transporter za odrezke - električni ročni kolesni upravljalec - merilna sonda Renishaw Nsdpfsx D A Ddex Aliowi Tehnični podatki: Potezna pot X / X-pomik: 610 mm Potezna pot Y / Y-pomik: 510 mm Potezna pot Z / Z-pomik: 610 mm Velikost mize: 760x510 mm Vpenjalni stožec: SK40 Območje vrtljajev vretena: 10-10000 vrt/min Število orodij v izmenjevalcu: 24 Hitri pomik: 30 m/min Teža stroja pribl.: 4700 kg Tehnični podatki, dodatki in opis stroja niso zavezujoči.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Ponujamo CNC vertikalno obdelovalni center Hurco, skupaj z rezervnimi deli. Gib X/Y/Z: 1270 mm/660 mm/610 mm, dimenzije mize X/Y: 1500 mm/660 mm, največja obremenitev mize: približno 1360 kg, hitrost vretena: 10000 vrt/min, vpenjalna glava vretena: SK40, nazivna moč glavnega pogona: približno 18,5 kW, število mest za orodje: 24, hitrost podajanja X/Y: 30 m/min, hitrost podajanja Z: 20 m/min, hitrost hitrega premika X/Y: 30 m/min, hitrost hitrega premika Z: 20 m/min, števec delovnih ur vretena: približno 7676 ur, nadzorni sistem: Hurco Ultimax. Dimenzije stroja X/Y/Z: približno 3300 mm/2800 mm/3000 mm, teža stroja: približno 9000 kg. Ogled je možen po dogovoru. Nwodpfx Aljzkvmfjiji

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, potovalna razdalja osi X: 610 mm, pomik osi Y: 405 mm, pomik po osi Z: 510 mm, skupna masa: 4.000 kg, največja hitrost vretena: 8.000 obr/min, krmilje Ultimax Nodoy T Ekbjpfx Aliowi miza 760x400 mm hodi 610x405x510 mm menjalnik za 24 orodij maksimalna hitrost vretena 8000 vrt/min teža 4000 kg

Stanje: dober (rabljeno), Leto izdelave: 2004, skupna višina: 500 mm, skupna masa: 500 kg, skupna širina: 800 mm, premer vrtljive mize: 180 mm, obremenitev mize: 200 kg, Pribor za odrezovalno obdelavo Nikken - CNC180 MACH-ID 9663 Proizvajalec: Nikken Nedpjzhlb Hefx Aliewi Tip: CNC180 Krmiljenje: ULTIMAX Leto izdelave: 2004 Premer mize Ø: 180 mm Obremenitev mize: 200 Dolžina: 1200 mm Širina: 800 mm Višina: 500 mm Teža: 500 kg Prosimo, upoštevajte: Informacije na tej strani so bili po naših najboljših močeh in, kjer je bilo mogoče, pridobljene tudi od proizvajalca. Podatki so predstavljeni v dobri veri, vendar točnosti ni mogoče zagotoviti. Zato ti podatki ne pomenijo pravne zavezanosti ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Ultimax 3-4 control system, dual color displays (text + graphics) Travel distance X/Y/Z: 1020/510/610 mm Nwjdpfszatlxjx Alisi Spindle speed: 8,000 rpm Tool magazine for 24 tools, SK 40 DCF software

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 610 mm, pomik osi Y: 508 mm, pomik po osi Z: 610 mm, največja hitrost vretena: 10.000 obr/min, število osi: 3, To 3-osno vertikalno obdelovalno središče Hurco VMX24 je bilo izdelano leta 2004. Ponuja impresiven pomik 610 mm v osi X in 508 mm v osi Y ter največjo hitrost vretena 10.000 min⁻¹. Stroj ima napredne možnosti krmiljenja, kot sta sinhrono rezanje navojev in razširjen nadzor hitrosti. Če iščete kakovostne možnosti obdelave, vam priporočamo nakup pri nas ponujenega vertikalnega obdelovalnega centra Hurco VMX24. Kontaktirajte nas za več informacij. - CNC-krmilje: Ultimax (konfiguracija z dvema zaslonoma) - Različica programske opreme: 2.37.03e (patch j), 7. oktober 2013 - Tip stroja: vertikalni - Delovne ure po števcem: 0,0 (prikaz na sistemskem zaslonu) - Delovne ure vretena: 10.500 h (po besedilnem seznamu) - Pomik X-os (plus): 610 mm Nsdpfx Alszc R Atoiewi - Pomik X-os (minus): 0 mm - Pomik Y-os (plus): 508 mm - Pomik Y-os (minus): 0 mm - Pomik Z-os (plus): 0 mm - Pomik Z-os (minus): -610 mm - Največja hitrost vretena: 10.000 min⁻¹ - Največja hitrost orodja na vretenu: 10.000 min⁻¹ - Največja hitrost hitrega premika: 30.000 mm/min - Največji podajalni pospešek: 15.240 mm/min - Napetost: 400 V, 3-fazna - Frekvenca: 50 Hz - Največja moč motorja: 7,5 kVA - Nazivna moč pri polni obremenitvi: 18 kVA - Prekinjevalni/štartni tok: 10.000 A - Država izdelave: Tajvan - Nameščene opcije krmilja: 1. Obdelava žepov z otoki, 2. DXF, 3. Sinhronizirano rezanje navojev, 4. UltiNet, 5. Napredna regulacija hitrosti, 6. Rampni/helix vstop - Konstruktivne izboljšave: nova ležaja na osi X in Y - Ni vključeno v dobavo: primež, orodja in druga prikazana dodatna oprema

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krmiljenje Ultimax 4 Nedpfxjy U Rzus Aliswi Pomiki X/Y/Z: 610 x 510 x 610 mm Velikost mize: 760 x 510 mm Hitrost vretena: 12.000 min-1 Orodjarna za 24 orodij, SK 40 Odvod odrezkov

Stanje: rabljeno, TEHNIČNI PODATKI - Število osi: 5 REZKALNO VRETENO - Vpenjanje orodja: BT40 - Hitrost vretena: 12.000 [o/min] Nwedpfx Aloy Tzcgjioi - Moč pogona vretena: 18 [kW] LINEARNE OSI - Premik osi X/Y/Z: 800 / 700 / 510 [mm] - Hitrost hitrega podajanja (X/Y/Z): 35 / 35 / 35 [m/min] ZASNOVNA OS A - Premik: -110 / +30 [stopinj] ZASNOVNA OS C - Premik: 360 [stopinj] MENJAVA ORODIJ - Tip menjalca orodij: Bras chargeur - Število orodij v zalogovniku: 32 MIZA - Velikost mize: 610 x 530 [mm] - Največja obremenitev mize: 350 [kg] ELEKTRIČNO NAPAJANJE - Napetost napajanja: 400 [V] TEŽA IN DIMENZIJE - Potrebna površina: 4.000 x 2.700 [mm] - Višina stroja: 2.600 [mm] OPREMA - Krmilje: Hurco Ultimax - Teach-In programiranje - Elektronsko ročno kolo - Hladilna posoda

Stanje: rabljeno, Leto izdelave: 2006, Hurco VMX 42 i, letnik 2006, krmilje Ultimax 4, hodi X/Y/Z 1060/610/610 mm, menjalnik orodij za 40 mest, vpenjanje SK 40, hitrost vretena do 10.000 vrt/min, transporter ostružkov, notranje hlajenje (IKZ), osi X in Y imata rahlo zračnost. Nwodpfx Aezg E Nujlioi

Stanje: rabljeno, Leto izdelave: 2002, Technical Details: X-axis travel: 1060 mm y-axis travel: 610 mm z-axis travel: 610 mm Control unit: Ultimax 4 Spindle speed: 10 – 10,000 rpm Tool holder: SK40 Tool magazine: Drum magazine with 24 slots Feed rate (XYZ): 3 – 7,000 mm/min Nwjdpfx Aou Iddnoliei Rapid traverse (XY): 30 m/min Rapid traverse (Z): 20 m/min Table size: 1220 x 510 mm Table load capacity: 1.1 t Compressed air connection: for 6 bar Total power requirement: 30 kVA Machine weight approx.: 6.28 t (without attachments) Machine dimensions approx. LxWxH: 2.82 x 3.2 x 2.7 m Chip conveyor dimensions LxWxH: 3.0 x 0.65 x 1.5 m Enclosed working area with chip and splash guard cabin Including cooling unit with IKZ 30 bar supply (size 1200x500x150mm), capacity for 340 litres Spindle with through-spindle coolant (IKZ) Scraper belt chip conveyor Control panel with two screens Electronic handwheel Attention! The tool change gripper arm is missing from the machine! The control has been set to disabled/off accordingly. i.D.

Stanje: rabljeno, Leto izdelave: 2003, OBDELOVALNI CENTER HURCO VMX 42 LETO: 2003 Nwsdpfsyup Urjx Aliji CNC: HURCO UltiMAX 4 Miza: 1.270 x 610 mm Hodi: Os X: 1.070 mm Os Y: 610 mm Os Z: 610 mm Vreteno: ISO 40 DIN 69871 Hitrost: 10.000 vrt/min Moč: 18 kW Orodjarna: 24 postaj Kompletno z izmetnikom ostružkov Vključeni raznovrstni vpenjalni držaji

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Naprodaj je vertikalni 3-osni CNC-obdelovalni center Hurco BMC20 z upravljanjem Hurco Ultimax. Stroj je idealen za orodjarstvo, izdelavo posameznih kosov in male serije. Tehnični podatki: Krmiljenje: Hurco Ultimax Pomične poti X: približno 560 mm Pomične poti Y: približno 355 mm Pomične poti Z: približno 355 mm Velikost mize: približno 760 × 355 mm Orodni vpenjalni stožec: SK40 / CAT40 Hitrost vretena do 6000 min⁻¹ Menjalec orodij za 16 orodij Glavni motor: približno 7,5–10 KM Hitri pomiki: približno 10 m/min Teža stroja: približno 2800–3200 kg Oprema: - razna dodatna oprema Nwodpfey T Hkpex Alisi Stanje: rabljeno stroj je popoln pregled pod napetostjo možen

Stanje: dober (rabljeno), Leto izdelave: 2003, X-travel: 1270 mm Y-travel: 660 mm Z-travel: 610 mm Control system: Ultimax 4 Table load capacity: 1300 kg Spindle speed: 10,000 rpm Tool changer: 24 positions Tool holder: SK 40 Drive power: 15 kW Table size: 1500 x 660 mm Total power requirement: kW Machine weight approx.: 9 t Space requirements approx.: 4.8 x 4.5 x 2.95 m Njdpfxoiv R Hls Aliswi

Stanje: rabljeno, Leto izdelave: 2004, Hurco VMX24S vertikalni obdelovalni center s krmiljenjem Hurco Ultimax, velikost mize 760 mm x 510 mm, 24-pozicijski avtomatski menjalnik orodij (ATC), BT 40 vpenjala, 8000 obr/min, hodi X=610 mm, Y=508 mm, Z=610 mm, hladilni rezervoar. Serijska številka: H-2S061 (2004) Nwodpfx Aleznkmnjiji Lokacija: Ta stroj se nahaja v Burton-on-Trent. Ob uspešnem nakupu bo samodejno dodan strošek £350 za razstavljanje in nakladanje na ustrezen transport na vaš račun. Blokiranje in zavarovanje sta strošek kupca.

Stanje: rabljeno, Leto izdelave: 2020, x-pot 810 mm y-pot 610 mm z-pot 640 mm b-os 360 ° krmiljenje Ultimax vrtljaji vretena 8.000 min⁻¹ pogonska moč 56 kW vpenjalo za orodje SK 50 Nwjdpfx Ajzbmzvjliei hitri pomik 45/40/45 m/min Delovni čas približno 13.674 h Vreteni čas približno 4.211 h Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po dogovoru ogledati pod napetostjo. Tehnične značilnosti in dodatna oprema: - IKZ 40 bar - 2-kratni menjalec palet 500 mm x 500 mm z vpenjalnim stolpom in sistemom za centriranje (Quant) Dodatna oprema, prikazana orodja in pritrdilni elementi so vključeni le, če so navedeni v dodatnih informacijah. Spremembe in napake v tehničnih podatkih ter vmesna prodaja pridržani!

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 610 mm y-axis travel: 405 mm z-axis travel: 510 mm Table clamping surface: 760 x 400 mm Spindle taper: SK 40 Spindle speeds – stepless: 80 – 8000 rpm Spindle motor: 7.5 kW Maximum spindle torque: 142 Nm Feed rates: 3.0 – 7,600 mm/min Rapid traverse (longitudinal/cross/vertical): 24 / 24 / 15 m/min Distance table / vertical milling spindle max.: 600 mm Table load capacity: 350 kg Number of tool magazine positions: 24 Tool diameter with full magazine: 80 mm Nwedpfxovh Nbue Aliji Maximum tool length: 300 mm Maximum tool weight: 6.8 kg Control: ULTIMAX SSM Total power requirement: 18 kVA Machine weight approx.: 4.1 t Accessories: 2 SK 40 tool holders, RÖHM 3-jaw chuck, chip conveyor, coolant system

Stanje: dober (rabljeno), Leto izdelave: 1997, Type / Model: BMC30 Control: Ultimax SSM Operating hours: 5,744 h Travel distances x-y-z: 760 - 460 - 610 mm Table: 1,130 x 500 mm Clamping surface: 1,000 x 400 mm Speed range: 80 to 8,000 rpm Spindle taper: SK40 Feed rates: 3 to 7,600 mm/min Rapid traverse: 7,600 mm/min Tool changer: 24 stations Power supply: 11 kW Nwedpfxjv I Dn Nj Alioi Accessories/Equipment: Coolant system, external interface Condition: Good Weight: approx. 4.0 t Dimensions: 2,200 x 2,300 x 2,800 mm (without display)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, X-os: 1600mm, Y-os: 900mm, Z-os: 760mm, priključna moč: 38kVA, krmiljenje: Ultimax, obratovalne ure: cca 50.000h, z IKZ, naprava za pripravo hladilno-mazalnega sredstva Knoll AE 1058. Ogled na lokaciji je možen. Njdpfx Aloza E Ryjijwi