Trumatic 600 L nakup rabljenega (72.975)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Mali oglas
Marlenheim
628 km
Laserški prebijalni stroj
TRUMPFTrumatic 600 L-1600
Klic
Stanje: rabljeno, Leto izdelave: 1998, The machine was only used as a punch by the previous owner, laser needs to be checked if required!
With TRUMALIFT SHEETMASTER 1606
TECHNICAL DETAILS
Combined punching/laser operation: 2,585 x 1,650 mm
Punching operation: 3,085 x 1,740 mm
Laser operation: 3,085 x 1,650 mm
Performance
Laser power: 140 - 2,700 W
Maximum sheet thickness: 8 mm
Cutting capacity for mild steel: 8 mm
Cutting capacity for aluminium: 4 mm
Cutting capacity for stainless steel: 6 mm
Maximum punching force: 220 kN
Active hold-down (programmable in steps): 4.5 - 20 kN
Maximum workpiece weight: 230 kg
Speeds
Maximum positioning speed X-axis: 90 m/min
Y-axis: 60 m/min
Simultaneous (X and Y): 108 m/min
C-axis punching: 60 rpm
Thread forming: 180 rpm
Punching stroke rate (E = 1): 900 1/min
Marking: 2,800 1/min
Tools
Linear magazine: 18 tools with 3 clamps
Tool change time: 1.5 - 5 s
Bwsdjyar Dgepfx Aa Soh
Accuracy
Position deviation: ±0.10 mm
Mean positional scatter: ±0.03 mm
Programmable chutes for punched and laser parts (max.)
Size: 500 x 500 mm
TRUMPF CNC control: Base Siemens Sinumerik 840D
Mali oglas
Eschborn
651 km
Laserski stroj za rezanje
TRUMPFTrumatic 600 L
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, Kapacitete in osi
Delovno območje (X x Y): približno 3.080 x 1.650 mm.
Bwedpfxoxyk D Dj Aa Seh
Maks. debelina pločevine: do približno 8 mm (mehko jeklo).
Hitrosti pomika: X do 100 m/min; Y do 60 m/min.
Kombinirana hitrost: približno 100–116 m/min.
Natančnost: natančnost pozicioniranja ±0,10 mm.
Mali oglas
Borken
868 km
Laserski stroj in stroj za izsekovanje
TRUMPFTruMatic TC 6000 L 1300
Klic
Stanje: zelo dobro (rabljeno), Trumpf
We are offering a laser and punching machine.
Technical specifications:
Power supply: 400V/50 Hz
Protection: 3 x 100 A
Connected load: 65 kVA
Working area X x Y without repositioning
Combined operation: 2585 x 1280 mm
Punching operation: 2585 x 1370 mm
Laser operation: 2585 x 1280 mm
Performance:
Laser: 2000 W
Maximum sheet thickness: 8 mm
Maximum punching force (incl. 20 kN active stripper): 220 kN
Active stripper (programmable in steps): 4.5-20 kN
Maximum workpiece weight: 200 kg
Maximum pass-through height:
In punching mode: 35 mm
In laser mode: 22 mm
Speeds:
X-axis: 90 m/min
Y-axis: 60 m/min
Simultaneous strokes:
Punching: 900 /min
Marking: 2800 /min
C-axis:
Punching: 60 rpm
Thread forming: 330 rpm
Tools
Tool stations in linear magazine: 19 (with 2 clamps)
Number of tools with multitool use: 19 to 190 tools
All tools can rotate 360° continuously
Tool change time: 1.5-5 s
Bwjdpfom Ak Huox Aa Ssh
Maximum punching diameter:
Single stroke: 76.2 mm at all tool stations
Standard multi-cut: 200 mm
Maximum bending height: 25 mm
Maximum part size: 500 x 500 mm
Accuracy:
Position deviation: ± 0.1 mm
Mean position scatter: ± 0.03 mm
TRUMPF CNC control: Base: Siemens SINUMERIK 840D
Type: TC 6000 L 1300
Loading and dismantling must be carried out by the buyer!
Condition: used
Scope of delivery: (See picture)
(Specifications, technical data, and information subject to change and error!)
We are happy to answer further questions by phone.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Dražba
Dražba končana
Bayern
438 km
Laserska luknjarska stiskalnica
TRUMPFTruMatic 6000 L - 1600
Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 72.918 h, laserska moč: 2.700 W, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 8 mm, maks. debelina aluminijaste pločevine: 4 mm, TECHNICAL DETAILS
Combined punching/laser operation: 2,585 x 1,650 mm
Punching operation: 3,085 x 1,740 mm
Laser operation: 3,085 x 1,650 mm
Performance
Laser power: 140 – 2,700 W
Maximum sheet thickness: 8 mm
Cutting capacity (mild steel): 8 mm
Cutting capacity (aluminium): 4 mm
Cutting capacity (stainless steel): 6 mm
Maximum punching force: 220 kN
Active hold-down (programmable in steps): 4.5 – 20 kN
Maximum workpiece weight: 230 kg
Speeds
Maximum positioning speed X-axis: 90 m/min
Y-axis: 60 m/min
Simultaneous (X and Y): 108 m/min
C-axis punching: 60 rpm
Thread forming: 180 rpm
Punching stroke rate (E = 1): 900 strokes/min
Marking: 2,800 strokes/min
Bwedpfxsw Suwye Aa Sjh
Tooling
Linear magazine: 18 tools with 3 clamps
Tool change time: 1.5 – 5 s
Accuracy
Positional deviation: ±0.10 mm
Average positional scatter: ±0.03 mm
Programmable chutes for punched and laser parts (max.)
Size: 500 x 500 mm
TRUMPF CNC control: Siemens Sinumerik 840D-based
MACHINE DETAILS
Laser on-time: 72,918 h
Cutting time: 18,536 h
Space requirement (width x length): 7,900 x 9,100 mm
Height: 2,400 mm
Weight: 22,500 kg
Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h
Connected load: 73 kVA
Dražba
Dražba končana
Bayern
438 km
Laserska luknjarska stiskalnica
TRUMPFTruMatic 6000 L - 1300
Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, obratovalne ure: 13.549 h, laserska moč: 3.200 W, prebijalna sila: 22 t, najv. debelina pločevine: 8 mm, maks. debelina aluminijaste pločevine: 3 mm, teža obdelovanca (maks.): 200 kg, TECHNICAL DETAILS
Punching work area: 2,585 x 1,280 mm
Laser work area: 3,085 x 1,370 mm
Combined work area: 3,085 x 1,280 mm
Control system: Siemens Sinumerik 840 D
Laser power: 140 - 3,200 watts
Wavelength: 10.6 µm
Sheet thickness: 8 mm
Cutting capacity (mild steel): 8 mm
Cutting capacity (aluminum): 3 mm
Cutting capacity (stainless steel): 4 mm
Workpiece weight: max. 200 kg
Punching force: 220 kN
Active hold-down force: 4.5 - 20 kN
Linear tool magazine: 21 tools with 3 clamps
Programmable chute: 500 x 500 mm
C-axis punching: 60 rpm
C-axis thread forming: 180 rpm
Stroke rate punching: 900 strokes/min
Stroke rate marking: 2,800 strokes/min
Compressed air connection: 7 ± 1 bar
Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h
MACHINE DETAILS
Length: approx. 7.5 m
Width: approx. 8.1 m
Height: 2.4 m
Weight: 16 t
Laser on-time: 49,949 h
Cutting time: 13,549 h
EQUIPMENT AND FEATURES
- Rigid C-frame
- 2 x clamping claws
- Drives: maintenance-free three-phase servo motors
- Programmable hold-down for repositioning
- Sensor-monitored part chutes 500 x 500 mm for punching and laser stations, ejector cylinder on laser chute
- 2 x finished parts containers
- HI-LAS high-pressure cutting
- Fast processing with SprintLas
- ContourLas for small hole production
- Programmable cutting gas pressure
- Laser cutting head: 5" lens, quick-change system, APC height control
- Lens monitoring sensors
Bwodpjvzrb Defx Aa Ssh
- Additional cutting head with 7.5" lens
- Punch head: hydraulic mono tool holder, 360° rotation for all tools, automatic tool length compensation, spray tool lubrication, 2 x lubricant tanks, slug extraction, scrap bin
- Safety: multi-beam light barriers, hydraulic quick shutoff, extraction and compact dust collector, shielding against stray radiation on cutting head
- Laser TLF 3200 incl. 9" cutting head for stainless steel
- AutoLas Plus function
- MultiTool function
- MultiBend function
- Thread forming function
- Marking/fast embossing function
- Roller technology function
- Softpunch function
- 1 x additional clamping claw
- Chip conveyor with tipping bin
- Brush tables with loading and unloading aid
- Blowing device for small parts
- BNC network connection instead of RJ45 port
Dražba
Dražba končana
Baden-Württemberg
521 km
Laserska luknjarska stiskalnica
TRUMPFTruMatic 6000 L
Leto izdelave: 2006, obratovalne ure: 46.547 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Trumpf TruMatic 6000 L Laser Punching Machine with TrumaLift SheetMaster, ToolMaster, GripMaster, and Scissor Lift Table.
SheetMaster: Not only loads and unloads the machine but also reliably sorts the parts.
ToolMaster: Automatically changes tools quickly, safely, and conveniently.
GripMaster: Reliably moves scrap grids and strips.
TECHNICAL DETAILS
Working area: 2585 x 1280 mm
Control: Siemens Sinumerik 840 D
Laser power: 3200 watts
Sheet thickness for mild steel: max. 8 mm
Sheet thickness for stainless steel: max. 8 mm
Sheet thickness for aluminum: max. 4 mm
Workpiece weight: max. 200 kg
Accuracy: +/- 0.1 mm
Punching force: 22 t
Max. punching diameter: 76.2 mm
Bwodpon Nxw Djfx Aa Ssh
C-axis punching: 330 rpm
Stroke rate: 450 – 1000 strokes/min
Marking stroke rate: 2800 strokes/min
MACHINE DETAILS
Laser on-time: 46,547 h
Cutting time: 23,580 h
Length: 7,500 mm
Width: 8,100 mm
Height: 2,400 mm
Weight: 16,000 kg (base machine)
Operating voltage: 400 V / 50 Hz
Connected load: 76 kVA
Mali oglas
Deinze
1.000 km
Laser Rezalni stroji
TrumpfTrumatic laserpress 600L-1600
Klic
Stanje: pripravljen za uporabo (rabljen), proizvajalec krmilnikov: Siemens Sinumerik 840D, laserska moč: 2.400 W, potovalna razdalja osi X: 3.050 mm, pomik osi Y: 1.750 mm, skupna dolžina: 8.400 mm, skupna širina: 7.800 mm, lastna masa: 22.500 kg, Trumpf Trumatic laserpress 600L-1600
Dimenzije obdelovanca: 3085 x 1650 mm
Tip laserja: Trumpf TLF
Maksimalna debelina reza v jeklu: 8 mm
Bedpsygyvqefx Aa Sowh
Nakladalni sistem: da, SheetMaster
Mali oglas
Neukamperfehn
962 km
Stojalo s širokim razponom
Kommissionierwagen/ H: 2.150 x L: 1.550x T: 600 mm / 3 Ebenen
Klic
Stanje: novo, Leto izdelave: 2024, Your contacts at our company:
Mr. Andre Evering
Mr. Mario Klöver
Mr. Falk Deutsch
Technical data for the tier trolley:
Manufacturer: LPR
Type: 600
01x Tier trolley, new
Frame colour: blue / orange
Overall height incl. castors: 2,150 mm
Overall width: 1,550 mm
Overall depth: 600 mm
Number of levels: 3 pcs.
Consisting of:
02x Upright frames, new
Bedpfjdb N Hmjx Aa Sswh
Frame colour: blue
Frame profile dimensions: 50 x 50 mm
Incl. horizontal and diagonal bracing,
metal base plates, plastic end caps
Uprights are pre-assembled (bolted lattice construction)
2,000 mm high
600 mm deep
06x Cross beams for workbench, new
Beam colour: orange
Design: stepped beam
Clear span: 1,450 mm
Profile dimensions: 80 x 50 mm
Compartment load: 300 kg (with evenly distributed load)
12x Safety pins, new
For securing the longitudinal beams
against unintentional lifting
03x Inlay shelves, second choice, used
Thickness: 22 mm
Dimensions: 1,430 x 545 mm
02x Double-braked swivel castors, new
02x Swivel castors, new
08x Machine screws: M8 x 20 mm
08x Nuts: M8
08x Washers
Images are for material clarification. Actual material colour may vary.
- Workbenches are supplied unassembled;
- Workbench frames are pre-assembled;
- Production time is usually approx. 3 - 5 working days.
Our range of services: (prices upon request)
- Assembly, installation
Please observe our general assembly conditions
- Racking inspection
Inspection carried out according to DIN EN 15635 and
requirements of BGR 234 (visual inspection for all racking systems)
- Delivery using our own vehicle fleet
(unloading not included)
Mali oglas
Kuurne
1.011 km
Laser rezalni stroj
TRUMPFTRUMATIC 600L
Klic
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, Ponujamo rabljeni laserski rezalni stroj TRUMPF TRUMATIC 600L, letnik 2000.
Proizvajalec: TRUMPF
Model: TRUMATIC 600L
Letnik: 2000
Stanje: rabljeno
Bedjx Runwjpfx Aa Sswh
ID kategorije: 902
ID tipa: 1180
Tip: laserski rezalni stroj
Za dodatna vprašanja ali informacije nam pošljite sporočilo ali nas pokličite.
Mali oglas
Alzenau
619 km
Laserska luknjarska stiskalnica
TrumpfTruMatic 6000 (K01) Mittelformat
Klic
Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 41.804 h, Used TRUMPF TruMatic 6000 (K01) – medium format
Technical Data:
Year of manufacture: 2008
Last maintenance: 18/03/2025
Operating hours NC: 41,804
Resonator hours: 14,466
Beam-on hours: 2,054
Bwjdpfx Aaewkd Efe Ssh
Y-axis: 1,300 mm
Additional equipment: various tools
Recently installed new parts:
Conversion to TASC5 laser control (01/2025)
Operator panel with display (01/2025)
Box PC (01/2025)
Hydraulic punching head/multilayer (10/2021)
Mali oglas
Limmen
1.032 km
Laserski stroj za izsekovanje
TrumpfTrumatic 600L
Klic
Stanje: rabljeno, Leto izdelave: 1997, obratovalne ure: 50.161 h, številka stroja/vozila: 080163, Trumatic 600L 1600 naprodaj. Prebijalni del je v dobrem stanju. Laserski del potrebuje servis.
Bjdsu Hxmzopfx Aa Sjwh
Mali oglas
Nemčija
650 km
Prebijalno-laserski stroj
TrumpfTRUMATIC 6000L
Klic
Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Največja rezalna sila: 220kN, moč laserja: 3200W, priključek za dušik: 30bar, priključek za kisik: 20bar, priključna moč: 76kVA, obratovalne ure začetkom leta 2025: 67.766h, z laserjem Trumpf TLF 3200 in hladilnikom RIEDEL L 15/21 TR3/19.00, hladilno sredstvo: R134a, napolnjena količina: 11,5kg, visok tlak: 20,2bar. Orodja dodatno na voljo. Ogled na lokaciji možen.
Bwjdpfsw Uk A Rsx Aa Ssh
Mali oglas
Nemčija
650 km
CNC laserski izsekovalni stroj
TrumpfTrumatic 600L
Klic
Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), A Trumpf laser cutting and punching machine with an unknown defect (linear amplifier is functional) is available. Pressing force: 220 kN, laser power: 1500 W (1.5 kW), max. punching diameter: 76 mm, max. workpiece dimensions X/Y: 2585 mm / 1280 mm, max. sheet thickness (mild steel/stainless steel/aluminum): 8 mm / 6 mm / 4 mm, max. workpiece weight: 200 kg, parts remover X/Y: 500 mm / 500 mm, magazine positions: 18. Machine dimensions X/Y/Z: approx. 8000 mm / 7500 mm / 2400 mm, weight: approx. 16,000 kg. An on-site inspection is possible.
Bwsdewftdgepfx Aa Soh
Mali oglas
Werberg
266 km
Dvigač za papir
Polar MohrL 600-3
Klic
Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Dvigalo za papir za palete
Bodpfxjyhc A Ns Aa Sowh
Mali oglas
Neuss
829 km
Viličar
StillRX 60-25 L/600
Klic
Stanje: dober (rabljeno), Leto izdelave: 2008, vrsta goriva: električni, dolžina vilic: 1 mm, Neto masa: 4.585 kg
Dvižna zmogljivost: 2.500 kg
CE-oznaka: da
Tehnično stanje: dobro
Vizualno stanje: dobro
Transportne mere (D x Š x V): 2,38 x 1,3
Država proizvajalca: DE
Za dodatne informacije se obrnite na Christiana Theißena.
Proizvajalec: Still
Tip: RX 60-25
Letnik: 2008
Vrsta izdelka: Rabljeno
Podatki:
Maks. višina dviga: 3,65 m
Maks. dvižna moč: 2500 kg
Dolžina vilic: 1,25 m
Pogon: Elektro
Skupne mere D x Š (brez vilic): 2,38 x 1,30 m
Višina stroja: 2,73 m
Lastna masa: 4.585 kg
Posebnosti: bočni pomik, zaščitna streha, prednje steklo
Lokacija: 41468 Neuss
Bedsx Hhcgspfx Aa Sewh
takoj na voljo
Mali oglas
Raasdorf bei Wien
262 km
Ravnalni skobeljni stroj
HofmannAHW 600 L
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Hofmann AHW 600 L ravnalni skobeljni stroj
Širina skobljanja: 600 mm
Nožna gred z 2 segmentnimi noži
Bwedjx S Na Rjpfx Aa Ssh
Dolžina mize: 3000 mm
Težka litoželezna izvedba
Moč motorja: 5,5 KM
Teža: 1050 kg
Hitrost vrtenja nožne gredi: 5000 obr/min
Mali oglas
Burghaun
637 km
Prevoz v hladilniku/zamrznjenem stanju
Mercedes-BenzAtego 818 L 4x2 LBW ThermoKing V-600
Klic
Stanje: rabljeno, prevoženi kilometri: 35.076 km, moč: 130 kW (176,75 KM), barva: bela, vrsta prenosa: samodejen, Leto izdelave: 2022, Oprema: ABS, centralno zaklepanje, servovolan, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you by phone.
Bwodpfxeyfrzie Aa Soh
Mercedes-Benz Atego 818 L 4x2 refrigerated box truck with tail lift
Tail Lift: BÄR BC 1500 S4L-A5 (1,500 kg), Body refrigeration: ThermoKing V-600 Max, A1M front axle, 4.1 t, A2B rear axle, crown wheel 325, hypoid, 6.2 t, A5L axle ratio i = 3.417, B1B electronic braking system with ABS and ASR, B1C electronic air supply unit, low, B1F heater, electronic air supply unit, B2A disc brakes on front and rear axle, B4A condensate monitoring for air system, C1U wheelbase 3,620 mm, C5I mounting parts for platform body, C6B steering ZF 8095, C6S stabilizer for extreme heavy load, rear axle, C7E front underrun protection (ECE), steel, C7M side protection, weight-optimized, C8J splash guards integrated in wheel arches, C9M extended frame overhang, 400 mm, 2-axle, C9Y rear underrun protection deleted (ECE), D1B driver air suspension seat, standard, D1M co-driver fixed seat, simple, D3X seat cover: flat woven fabric, D4B Classic cockpit, D4W electric windows, both sides, D6Y pollen filter, D7L overhead storage, above windscreen, 1 compartment, D8A roof hatch/ventilation flap, E0E Banner batteries, E0Y battery cover, E1H batteries 2 x 12 V/165 Ah, low-maintenance, E1N alternator 28 V/100 A, E5A switch no. 1 for body builder electrics, E7F remote cable control for air suspension, E9H pre-installation tail lift control, F1P S-cab, F1X S-cab ClassicSpace, 2.30 m, tunnel, F2U ClassicSpace, F6I heated front mirror, F6J main mirror, electric, driver’s side, F7V cab entry two-step, F8E locking system with central locking, F8V light sensor, F8W rain sensor, F9A preparation for cab parts, body width 2,600 mm, G0K driving mode economy/power, G1B transmission G 70-6/5.94-0.74, G5G Mercedes PowerShift 3, I0I tubeless tires 235/75 R 17.5 front axle, I6X air suspension, rear axle, J1A instrument cluster, 10.4 cm, J1O digital tachograph, 2nd generation, ADR, J1S tachograph manufacturer VDO, J3N Fleetboard Eco Support, J5S radio with USB port and Bluetooth, J8Y pre-installation for Truck Data Center 7, J9D pre-installation for toll collection, K0E plastic tank 120 l, left, K3S AdBlue tank 35 l, K5M lockable tanks, K5S protective cover for AdBlue dosing system, K7I exhaust system right frame, tailpipe internal, L0A lighting regulations to UN-R 48.06, L0Y extended rear light harness, L1B daytime running lights, L2H flashing side marker lamps, L9D pre-installation for additional indicator lights, M0S noise encapsulation to ECE, M1I engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm, M4X engine version Euro VI, E, M5U engine brake standard system, O1X integration CLCS TL function in ASAM, P0L tail lift pre-installation, Atego, Q1D front parabolic spring 4.0 t, R0Z wheel nut cover, R1B steep-shoulder rims 6.75 x 17.5, S1D stability control assist (ESP), S1H lane keeping assist, S1P Active Brake Assist, S5A speed limiter 90 km/h / 56 mph, ECE, S5Z cruise control, T0K weight variant 7.49 t (3.8/5.7), U2I EBS control code, 4th generation, U3D CAN bus standard node classic control code, U3F global AdBlue sensor (GMS DEF) control code, U3M 2nd generation electronic architecture, V1D Atego New Distributor, V1W standard, V2T Atego model generation 1, V7E body type chilled goods box body, X2E type plate EU, X2T maintenance documentation, X2Y registration certificate part II, prepared, X3O Mercedes-Benz OnRoadService, X3Z ATS warranty according to...
Mali oglas
Moosbierbaum
249 km
Laser rezalni stroj
TrumpfTrumatic L 3030
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, številka stroja/vozila: A0220A0572, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec krmilnikov: Siemens Simunerik, vrsta laserja: CO₂ laser, laserska moč: 4.000 W, najv. debelina jeklene pločevine: 20 mm, maks. debelina pločevine iz nerjavečega jekla: 12 mm, maks. debelina aluminijaste pločevine: 8 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, delovna višina: 115 mm, teža obdelovanca (maks.): 710 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, skupna masa: 11.500 kg, skupna dolžina: 9.300 mm, skupna širina: 4.600 mm, skupna višina: 2.600 mm, leto zadnje generalne obnove: 2023, Oprema: CE označba, dokumentacija / priročnik, Wszystkie serwisy i przeglądy zostały przeprowadzone bezpośrednio przez producenta (Trumpf).
Możliwość oględzin w dowolnym momencie. Plan montażowy w zestawie. Maszyna została zdemontowana i zmagazynowana przy współudziale i nadzorze firmy Trumpf.
Możliwe również wsparcie przy montażu i uruchomieniu. Plan montażu dołączony do dokumentacji.
Maszyna dostarczana jest wraz z LIFTMASTER Typ LMZ3050 0556817 / 256417 / udźwig 9000 N / rok produkcji 2003.
Szczegóły na zdjęciach.
W zestawie wózki załadowcze i rozładowcze
Bwsdpfsx Rt Ddsx Aa Sjh
W zestawie przenośnik podłużny i poprzeczny do drobnych elementów/odpadów
W zestawie ogrodzenie bezpieczeństwa
Maszyna wraz z dużym magazynem części zamiennych (cena uzyskana od firmy Trumpf: wartość zakupu 42 000,00 EUR).
Lista części w załączniku.
Załadunek i transport maszyny został zrealizowany przez firmę SCHWERLAST Austria (koszt na terenie Austrii ok. 6 000,00 EUR).
Mali oglas
Niederlangen
930 km
Laser rezalni stroj
TRUMPFTrumatic L 3040
Klic
Stanje: rabljeno, Leto izdelave: 2006, Table length: 3000 mm
Table width: 1500 mm
Laser power in watts: 4000
Equipment/features:
- Enclosed machine frame with integrated laser unit
- Laser unit: CO2 laser TFL 3200 high-frequency aggregate, maintenance-free turbo radial blower, mirror telescope
- Automatic pallet changer
- Longitudinal conveyor belt for small parts/waste
- Drives: Maintenance-free three-phase servo motors
- Additional high-dynamic Xp-axis
- Quick-change system for cutting head
- Laser cutting head with 5" lens and laser cutting head with 7.5" lens
- Programmable cutting gas pressure control
- APC capacitive height regulation and process control
- Automatic focus position adjustment AutoLas Plus
- Laser power control
- Positioning laser diode
- HI-LAS high-pressure cutting
- Fast processing with SprintLAS
- ContourLAS for the production of smaller holes
- PMS plasma sensor technology
- Automatic sheet edge detection
- Programmable power cycles
- Compressed air cutting
- PCS Process Control System
- Microweld
- Spray device for safe thick sheet processing
- Automatic shutdown
- Work area lighting
- Control: Sinumerik 840D; open PC-based control, easy operation, online help, integrated e-shop, diagnostic function, maintenance logbook, technology data, teleservice
- Workshop programming ToPs 100 lite
- Safety: Multi-beam light barriers, completely encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, protective cabin
Bwsdoydfngepfx Aa Soh
Mali oglas
Remscheid
801 km
Resonator
TrumpfTrumatic L 3050 - Resonator 6 kW
Klic
Stanje: rabljeno, Na prodaj je resonator laserske naprave Trumpf v dobrem rabljenem stanju, kot je razvidno s slik.
Tehnični podatki:
• Proizvajalec: Trumpf
Bwsdpfxoyfnb So Aa Soh
• Laserska naprava: L-3050 (6kW, letnik 2005)
Pošiljanje je možno na zahtevo (tudi mednarodno).
Prejmete račun z izkazanim DDV-jem.
Ogled/prevzem je možen po dogovoru v 42855 Remscheid.
Prodaja iz lokacije 42855 Remscheid, prosto naloženo.
Pridržujemo si pravico do tehničnih napak in predhodne prodaje.
Mali oglas
Remscheid
801 km
Stikalna oprema in razdelilna plošča
TRUMPFTrumatic L-3050 6kW - Schaltschränke
Klic
Stanje: dober (rabljeno), Leto izdelave: 2005, Naprodaj so krmilne omare laserne naprave Trumpf v dobrem, rabljenem stanju, kot je prikazano na slikah.
Tehnični podatki:
• Proizvajalec: Trumpf
• Laserska naprava: L-3050 (6 kW, l. 2005)
Dostava na zahtevo možna (tudi mednarodna).
Bwedpfsyfm Evex Aa Ssh
Prejmete račun z izkazanim DDV-jem.
Ogled ali prevzem možen po dogovoru v 42855 Remscheid.
Prodaja z lokacije 42855 Remscheid, naloženo na vozilo.
Pridržujemo si pravico do napak v tehničnih podatkih in predhodne prodaje.
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Hardthausen am Kocher
542 km
Laserski stroj za rezanje
TRUMPFTrumatic L 3030 - 4 kw
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, obratovalne ure: 39.500 h, laserska moč: 4.000 W, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 10 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 115 mm, TRUMPF Trumatic L 3030 – 4 kW – Year 2001
TECHNICAL DATA:
Manufacturer: TRUMPF
Model: L 3030 – 4 kW
Year of manufacture: 2001
Working area: 3,000 x 1,500 x 115 mm
Control: Siemens Sinumerik 840 D
Laser power: 4,000 watts
Max. sheet thickness (mild steel): 20 mm
Max. sheet thickness (stainless steel): 15 mm
Bwjdpjulqrljfx Aa Ssh
Max. sheet thickness (aluminium): 10 mm
Operating hours: NC on 39,500 h (10.08.2024)
Machine regularly serviced by TRUMPF!
STANDARD EQUIPMENT:
- Enclosed machine frame with integrated laser unit
Laser unit: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower,
mirror telescope, cooling unit, logbook function
- Automatic pallet changer
- Longitudinal conveyor belt for small parts/waste
- Drives: maintenance-free three-phase servo motors
- Quick-change cutting head system
- Laser cutting head with 5" lens and cutting head with 7.5" lens
- Programmable cutting gas pressure adjustment
- DIAS 3 height control and process control
- Automatic focus position setting AutoLas Plus
- Laser power control
- Positioning laser diode
- HI-LAS high-pressure cutting
- High-speed processing with SprintLas
- ContourLas for producing small holes
- PMS plasma sensor system
- Automatic sheet outer edge detection
- Programmable power cycles
- Microweld
- Auto shut-off
- Work area lighting
- Sinumerik 840D control: Open PC-based control, easy to use, online help,
diagnostic functions, maintenance logbook, technology data, teleservice
- Safety: multi-beam light barriers, fully encapsulated and ventilated beam guide,
monitoring system, multi-chamber extraction and compact dust collector, protective cabin
- 3.5" floppy disk drive
- TFT color display
- Electrical equipment: voltage 400 V / 50 Hz
- Paintwork: Standard RAL 9002/5010
EXTENDED EQUIPMENT:
- Laser TLF 4000 incl. lens monitoring sensors
Mali oglas
Hardthausen am Kocher
545 km
Laserski stroj za rezanje
TRUMPFTrumatic L 3050 - 5 kw
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 58.000 h, laserska moč: 5.000 W, TRUMPF Trumatic L 3050 – 5 kW
TECHNICAL DATA:
Manufacturer: TRUMPF
Model: Trumatic L 3050 – 5 kW
Year of manufacture: 2005
Working area: 3,000 x 1,500 x 115 mm
Control: Siemens Sinumerik 840 D
Laser power: 5,000 W
Max. sheet thickness, steel: 25 mm
Max. sheet thickness, stainless:20 mm
Max. sheet thickness, aluminium:12 mm
Operating hours: approx. 58,000 h
STANDARD EQUIPMENT:
- Enclosed machine frame with integrated laser unit
- Laser unit: CO2 laser TLF 5000, high-frequency excited, chiller unit, logbook function
- Automatic pallet changer
- Longitudinal conveyor for small parts/waste
- Drives: Gantry drive in combination with linear direct drives
- Laser power control
- HI-LAS high-pressure cutting
- PMS plasma monitoring
- Fast processing with SprintLas
- ContourLas for producing small holes
- Programmable power cycles
- Microweld
- Programmable cutting gas pressure setting
- Laser cutting head with 5" lens and laser cutting head with 7.5" lens
- Quick-change cutting head device
- Automatic sheet edge detection
- Capacitive height control (DIAS)
- Process Control System (PCS)
- Positioning laser diode
- Automatic focus position setting AutoLas Plus
- Automatic shutdown
- Workspace lighting
- SIN 840D control: Open PC-based control, easy operation, online help, diagnostic functions,
maintenance log, technology data, teleservice
- Workshop programming ToPs 100 lite
- Safety: Multi-beam light barriers, fully enclosed and nitrogen-flushed beam guidance,
monitoring system, multi-chamber extraction and compact dust extractor, safety cabin
- Network connection: BNC/RJ-45 network interface
- Electrical equipment for 400 V / 50 Hz three-phase current
Bwsdpfx Ajrgaw Hea Ssh
- Colour: Structured paint white RAL 9002 / gentian blue RAL 5010
EXTENDED EQUIPMENT:
- Additional laser cutting head with 9-inch lens
- NEW transmitter tube upon delivery
Mali oglas
Hardthausen am Kocher
545 km
Laserski stroj za rezanje
TRUMPFTrumatic L 3030 - 4 kw
Klic
Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, laserska moč: 4.000 W, SHORT-TERM AVAILABILITY:
TRUMPF Trumatic L 3030 – 4 kW – Year 2006
TECHNICAL DATA:
Manufacturer: TRUMPF
Model: L 3030 – 4 kW
Year of manufacture: 2006
Working area: 3,000 x 1,500 x 115 mm
Control: Siemens Sinumerik 840 D
Laser power: 4,000 watts
Max. sheet thickness, mild steel: 20 mm
Max. sheet thickness, stainless steel: 15 mm
Max. sheet thickness, aluminium: 10 mm
Operating hours: NC
The machine has been regularly serviced by TRUMPF!
Transmitting tube: new 2024
TASC laser control: new 2022
Driver stage: replaced 2018
Magnetic bearing electronics: new 2016
STANDARD EQUIPMENT:
- Enclosed machine frame with integrated laser unit
Laser unit: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower,
mirror telescope, chiller, logbook function
- Automatic pallet changer
- Longitudinal conveyor belt for small parts/scrap
- Drives: maintenance-free three-phase servo motors
- Quick-change cutting head system
- Laser cutting head with 5" lens and laser cutting head with 7.5" lens
- Programmable cutting gas pressure regulation
- APC capacitive height control and process regulation
- Automatic focus position adjustment AutoLas Plus
- Laser power control
- Positioning laser diode
- HI-LAS high-pressure cutting
- Fast processing with SprintLas
- ContourLas for producing small holes
- PMS plasma sensor technology
- Automatic outer sheet edge detection
- Programmable power cycles
- Microweld
- Automatic shut-off
- Workspace lighting
- Sinumerik 840D control: open PC-based control, easy operation, online help,
integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice
- Workshop programming ToPs 100 lite
- Safety: multi-beam light barriers, fully enclosed and ventilated beam guidance,
monitoring system, multi-chamber extraction and compact dust collector, safety cabin
- 3.5" floppy disk drive
- TFT colour screen
- Electrical equipment: voltage 400 V / 50 Hz
- Paint finish: standard RAL 9002/5010
ADDITIONAL EQUIPMENT:
- Laser TLF 4000, including lens monitoring sensor technology
- PCS Process Control System
Bwsdpfxjuthz Tj Aa Soh
Mali oglas
Wijchen
922 km
CNC horizontalni obdelovalni centri Morbidelli Author 600 K L 2001
MorbidelliAuthor 600 K L
Klic
Stanje: rabljeno, Leto izdelave: 2001, Unladen weight: 5,000 kg
What are Presale Items at Second Owner?
Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines solely based on photos, and we sell them with the information provided in the listing. Unfortunately, we do not have any additional details, such as exact dimensions or machine specifications. Moreover, these machines are often not yet in stock and have not been inspected by us.
These machines are offered at attractive prices, which means prices are lower than usual, but the risk lies entirely with the buyer. Please review the information in the listing carefully before making a purchase.
If you have any questions, please feel free to contact us!
- Year of manufacture: 2001
- Documentation available: No
- CE marking present: Yes
- CE certificate available: No
- Serial number: AL/6222
- Number of milling spindles [pcs]: 1
- Milling spindle 1:
- Number of controlled axes [pcs]: 3
- Type of router table: Beam table
- Tool clamping system: HSK-F63
- Boring tool included: Yes
- Horizontal boring spindles [pcs]: 18
- Vertical boring spindles [pcs]: 6
- Tool changer positions [pcs]: 14
- System/software: Xilog plus
- Safety feature: Bumper
- Voltage [V]: 400
- Current consumption [A]: 32
Bsdpfx Aasxbzg Ee Sewh
- Power output [kW]: 26.0
- Transport weight [kg]: 5,000 kg
Financial Information
VAT: The stated price is exclusive of VAT
VAT/margin taxation: VAT deductible for businesses
Delivery and trade-in possible at any time for all items in the industrial sector
Glenn Smeets
Olajšamo vam iskanje: "trumatic 600 l"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Trumatic 600 L (72.975)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec



































































































































































































































