Testiranje Tiska nakup rabljenega (9.962)

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0319, Pressure: 125 t Passage width: 1000 mm Stroke: 500 mm Machine weight approx. (without operating fluids): 6 t Dimensions (L x W x H): 2540 x 933 x 3000 mm Retracting force: 12 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 600 x 1300 mm Table plate: 600 x 1300 mm Table height above floor approx.: 850 mm Oil cooling (electric): 1.5 kW (max) Motor power: 11 kW Approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Oil tank: 250 l Rapid traverse speed: 10 mm/sec Column diameter: 120 mm Operating principle of the tool testing press: 1. The main switch is activated by turning. Isdpfx Aofxykpjh Deih 2. Then, the press lighting should be switched on. 3. The tool is placed into the pressure center of the press. If the tool requires greater force off-center (e.g., with combination tools where the first station punches thick sheets while subsequent stations only carry out fine work), it may be necessary to shift the tool slightly to the left or right so that the counterforce from the material acts as centrally as possible on the ram. 4. The lower tool is bolted to the press table, and the upper tool is then lowered. 5. To do this, switch on the pump at the control cabinet. The fall protection then releases the ram. 6. A slow pull on the control lever starts the downward movement. The more you pull, the faster the press operates. For safety reasons, the maximum downward speed is limited to 10 mm/sec. 7. The pressing force is set via a rotary knob, located to the right near the manual control lever. 8. After the ram reaches the upper tool, it is attached to the ram. 9. Any transport locks are removed if present, then the press is opened by pressing the manual lever. The speed of the upward movement can be continuously adjusted from 0 to 25 mm/sec using the manual lever.

Stanje: dober (rabljeno), Press control unit from Brankamp, removed from a used machine due to a complete rebuild of the control system. Not tested, but was in use up to removal. Iodpsbu N N Nefx Ah Deih May be suitable for spare parts or as a donor unit.

Stanje: generalkompletno obnovljen (rabljeno), Overhauled tensile testing machine, model Erichsen 472-500N Force range: 0–500 N Travel resolution: 0.01 mm Test speed: 0.5–500 mm/min Traverse stroke: 800 mm Installation width: 205 mm Dimensions (H x W x D): 1,035 x 340 x 320 mm Ijdpfx Aendca Rsh Doih Weight: approx. 40 kg Includes 200 N load cell Load cell model 713-200N Measuring range: 0–200 N (Other load cells optional) Includes new machine controller Controller board with USB interface for PC control via Windows Includes software package PM-Soft-Smart PC control and evaluation software for testing machines, compatible with PCs running Windows 10 or 11. The modern, high-performance testing software enables test procedures and evaluations in accordance with relevant test standards, as well as the creation of custom test templates and evaluations using the integrated template editor and protocol generator. Note: The offered software requires a PC with Windows 10 or 11 and a USB interface. Includes factory calibration of the load cell for both tension and compression, with calibration certificate.

Stanje: rabljeno, Leto izdelave: 1989, Input – primary 400 V three-phase Output – secondary switchable - 230 V three-phase - 400 V three-phase - 525 V three-phase - 660 V three-phase Power rating: 50 kVA Dimensions (W x D x H): 800 x 400 x 2,000 mm Weight: approx. 430 kg Ijdocw Twpspfx Ah Djih

Stanje: novo, Hydraulic Cylinder Replacement Cylinder Iedpfx Ahjd Hgade Dsih Chamber Filter Press We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats.

Stanje: dober (rabljeno), Leto izdelave: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 environmental test chamber is designed for laboratory applications requiring the testing of materials and components under controlled environmental conditions. With its versatile capabilities and user-friendly controls, this programmable unit can be used to simulate a wide range of environmental conditions for scientific studies, product testing, and process control. Specifications for temperature testing in single-chamber operation: Hot chamber: Temperature shock test chamber, 300 l Temperature range: +50 °C to +220 °C Temporal temperature deviation at the center of the working space: ±1 K Spatial temperature deviation: ±2 K Temperature gradient (according to IEC 60068-3-5): 4 K Temperature change rate (according to IEC 60068-3-5, measured in supply air): Heating: 11 K/min Iodpowbdv Ssfx Ah Dsih Cold chamber: Temperature shock test chamber, 300 l Temperature range: -80 °C to +70 °C Temporal temperature deviation at the center of the working space: ±1 K Spatial temperature deviation: 2 K Temperature gradient (according to IEC 60068-3-5): 4 K Temperature change rate (according to IEC 60068-3-5, measured in supply air): Heating: 1.5 K/min Cooling: 4 K/min Technical Data: Temperature shock test chamber Test chamber volume: approx. 300 l Voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a /R-23 Refrigeration system: Water-cooled Weight: approx. 940 kg Year of manufacture: 1998 Test chamber internal dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Enclosure external dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 Find more items—new and used—in our shop! International shipping costs available upon request!

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, Pressure: 40 t Passage width: 1000 mm Stroke: 400 mm Approx. machine weight (without operating fluids): 3.5 t Dimensions (L x W x H): 2065 x 700 x 2905 mm Retracting force: 4 t Max. working height: 700 mm Return speed: 25 mm/sec Ijdpfx Ahefxykwe Dsih Ram plate: 1320 x 600 mm Table plate: 1320 x 600 mm Table height above floor approx.: 750 mm Oil cooling (electric): 1.5 kW (max) Motor power: 8 kW Feed speed: 10 mm/sec Pressing speed: 10 mm/sec Oil tank: 200 l Rapid traverse speed: 10 mm/sec Column diameter: 100 mm Hydraulics and tank mounted on top of the press: 2400 ? All-round maintenance platform: 3600 ? Siemens S7 1200: 4600 ? Drip tray made of painted steel: 850

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: 100810261, vrsta hlajenja: voda, SHINOHARA 75 VP PERFECTING PRESS (1+4 COLORS) CIP3. AUTOMATIC BLANKET CHANGE, AUTOMATIC WASHING SYSTEM. UV LAMPS. WATER CHILLER WITH AUTOMATIC ALCOHOL MIXING AND PH CONTROL. AUTOMATIC COUNTERS. INCLUDES WASH-UP ROLL REWINDER. PAPER PALLET ELEVATOR. 2 CALIBRATION DEVICES. 20 SPARE ROLLERS. Iiedpfx Aetvmrbsh Doh IMPRESSION COUNT: 4,600,000

Leto izdelave: 2023, Stanje: novo, Cost-effective dual-column microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 10 kN. User-friendly Windows software for universal testing sequences; simple tests can also be performed without a PC. Iodpjd H S R Ujfx Ah Deih Made in Germany Standard Equipment: • Machine with sensor (selectable between 50 N and 10 kN) • Accuracy class 0.5 • Basic Windows software • 2-year warranty Optional Equipment: • Extensive range of grips and fixtures (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending fixtures Special designs according to customer specification • Extensometers: Clip-on and long-travel models • Temperature and climate chamber • PM-Soft-Smart software For universal applications, freely programmable • Commissioning and training

Stanje: novo, Gesamthöhe 1500 mm Gesamtlänge 3000 mm 5 pneumatische Zylinder Druckluftdruck 8 bar Hub der pneumatischen Zylinder 100 mm Durchmesser der pneumatischen Zylinder 100 mm Iiodpfx Ahsdpbn Ae Djh

Stanje: rabljeno, System: Used chamber filter press Design: Side-beam guided Filter plate size: 400x400 mm Number of chambers: 30 Cake thickness: 25 mm Filter plates: Polypropylene (PP) Filter cloths: Optionally available, tailored to the specific medium Discharge: Open Open filtration area: approx. 7.5 m² Press capacity: approx. 90 dm³ Plate pack length: approx. 1,512 mm Filtration pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10°C / max. 50°C Plate shifting: Manual Hydraulic pump: Optional Motor voltage: 380 V Control voltage: 230 V – 24 V Accessories: Optional, according to customer requirements and machine type Safety devices: Optional Special accessories: Optional, depending on configuration Iiedpfx Ahob E A Efe Dsh Upgrades: Possible in consultation, depending on machine type Special services: Refurbishment service available upon request. Each unit undergoes a service check or general overhaul before delivery. Up to 12 months warranty provided for these units. Condition: The system is immediately operational. Purchase or rental: Inspections of the systems are possible by appointment at our premises.

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: ENZ 6CAL, Oprema: CE označba, Rabljena, delujoča klimatska komora ESPEC ESX-2CA, zračno hlajena. Čeprav ima ta model funkcijo vlažnosti, je ta izklopljena, zato deluje le kot temperaturna komora, z razponom od -70°C do +150°C. Hitrost hlajenja je 4,0°C na minuto. Notranje dimenzije (Š, G, V): 500 mm, 600 mm, 750 mm. Komora je opremljena s kalibracijo. Isdpfowy Uq Rox Ah Deih

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0199 - Rev.00, Pressure: 160 t Passage width: 1200 mm Stroke: 600 mm Machine weight approx. (without operating materials): 7 t Dimensions (L x W x H): approx. 2400 x 1400 x 3400 mm Return force: 16 t Max. working height: 800 mm Return speed: 25 mm/sec Ram plate: 1670 x 800 mm Table plate: 1670 x 800 mm Table height above floor approx.: 800 mm Oil cooling (electric): 1.5 kW (max) Motor power: 18 kW Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Travel distance: 600 mm Oil tank: 300 l Iodpfxjdxvfhj Ah Djih

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: 100810261, vrsta hlajenja: voda, SHINOHARA 75 VP REVERSING PRESS (1+4 COLORS) CIP3. AUTOMATIC BLANKET WASHING, AUTOMATIC WASH-UP. UV LAMPS. Iiodpfxjtvmq Ns Ah Dsh WATER CHILLER WITH AUTOMATIC ALCOHOL PH MIXING. AUTOMATIC COUNTERS. INCLUDES WASH CLOTH REWINDER WITH THE MACHINE. PILING ELEVATOR. 2 CALIBRATION DEVICES. 20 SPARE ROLLERS. IMPRESSIONS: 4,600,000

Leto izdelave: 2023, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Cost-effective single-column, microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 3 kN. User-friendly Windows software for universal test procedures; simple tests also possible without a PC. Made in Germany. Standard scope of delivery: • Machine with sensor (choice between 50 N and 3 kN) • Accuracy class 0.5 • Basic Windows software • 2-year warranty Optional equipment: • Comprehensive clamping tools (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending devices Custom solutions according to customer specifications • Extensometers / strain gauges: Clip-on and long-travel extensometers • Temperature and climate chamber • Windows Software PM-Soft-Smart Iiodpsd H S Hiofx Ah Djh for universal applications, freely programmable • Commissioning and training

Stanje: pripravljen za uporabo (rabljen), Stanje: rabljeno Ta oglas je za dva nadgrajena BD Phoenix M50 avtomatizirana instrumenta za identifikacijo in testiranje občutljivosti mikroorganizmov. Instrument BD Phoenix™ M50 omogoča natančne in hitre rezultate identifikacije ter testiranja občutljivosti, kar omogoča ustrezno terapijo in sprejemanje odločitev pri vodenju pacientov. Sistem lahko sprejme do 50 panelov hkrati in ga je mogoče nadgraditi za maksimalno izkoriščenost omejenega laboratorijskega prostora. AST paneli vključujejo do 29 antibiotikov na posameznem panelu, kar zmanjšuje potrebo po dodatnem testiranju in zagotavlja pravo vrednost MIC na osnovi aktualnih CLSI mejnih vrednosti. Sistem se je izkazal pri odkrivanju nove odpornosti. Instrument uporablja indikator oksidacijsko-redukcijskega potenciala, turbidometrično detekcijo rasti, popolno koncentracijo antimikrobnih zdravil na panelih ter sistem BDXpert™. Vse skupaj sestavlja sistem Phoenix Susceptibility, ki omogoča hitre, natančne in zanesljive rezultate testiranja občutljivosti. Rezultati so dodatno izboljšani s funkcijo zaznavanja zakasnjenih odpornih sevov, kar zagotavlja, da so rezultati Phoenix ne le hitri, ampak tudi natančni. Vključitev vseh koncentracij protimikrobnih zdravil na panelu omogoča zaznavanje nove odpornosti. Dva nadgrajena BD Phoenix M50 instrumenta s tehničnimi specifikacijami računalnika: Višina: 107 cm Ijdpfx Ahsrwbhus Doih Širina: 136 cm Globina: 76,5 cm Prostor levo: 7,62 cm Prostor desno: 45,72 cm Teža: 109 kg Zahteve glede napajanja: 90-264 VAC; 47-63 Hz, 15 A varovalka

Stanje: rabljeno, System: Chamber filter press, pre-owned Application area: Chamber filter press, pilot plant Design: Side-bar guided Filter plate size: 400 x 400 mm Number of plates: 15 Isdpfx Ahsb E I T Ss Dsih Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available as an option, matched to the specific medium Discharge: Open Filtration area: approx. 3.0 m² Press volume: approx. 37 dm³ Plate package length: approx. 700 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Pump technology: Optional Purchase or rental: Inspection of the systems at our facility can be arranged by appointment. Would you like to rent or purchase this unit? Please contact us—we are happy to assist you.

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, TAULER PRINTLAM 52 Digital, letnik 2007, enostranski termalni plastifikator Maksimalna velikost pol: 550 x 740 mm Minimalna velikost pol: 200 x 250 mm Maksimalna hitrost: 35 m/min (4000 pol/uro) Primerna gramatura papirja: 130 – 450 g/m² Iiodpfx Aeulgx Ieh Doh Električne specifikacije: 380-415V, 3-fazni tok, 50 Hz, 9 kW Dimenzije: 2,75 m (dolžina) x 1,25 m (širina) x 1,7 m (višina) – Tokovno podajanje – Avtomatski podajalnik pol – Pnevmatski pritiskalni valj – Avtomatski ločevalnik pol s spustno odlagalno mizico – Upravljanje preko zaslona na dotik

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0163, Pressure: 800 t Clear width between uprights: 1200 mm Iiedpsdxvfpofx Ah Deh Stroke: 500 mm Total power requirement: 85 kW Approx. machine weight: 40 t Dimensions L x W x H: 4100 x 3500 x 6650 mm Return force: 80 t Main cylinder: 1 piece Column diameter: 250 mm Installation height (distance between bolster and ram plate with cylinder fully retracted): 1000 mm Table size: 1300 x 1100 mm Ram area: 1300 x 1100 mm Ram height: 800 mm Table height above floor approx.: 950 mm Max. table load: 5 t Approach speed: 250 mm/sec Return speed: 150 mm/sec Oil tank: 1000 l Working speed at start: 10 mm/sec Hydraulics and tank mounted on top of press: included? All-round maintenance balcony: included? Side panels: included? Light barriers front and rear: included? Right side monitored door: included (800 x 530 mm)? Left side monitored door: included (800 x 530 mm)? Electrical oil cooling and thermal insulation for ram and table by a 30 mm thick insulation plate Table deflection according to DIN max. 0.2 mm Ejector force: 150 t Ejector stroke: 200 mm Ejector speed: 70 mm/sec

Stanje: dober (rabljeno), Leto izdelave: 2007, Wheel diameter – max. 500 mm Wheel width 200-400 mm Module 12 Speed 0-3,250 rpm Braking torque up to max. 95 Nm Inner taper: Taper #39 Control: Fanuc 16 Total connected load: 15 kW Iiodpfx Ahovr Hf Ej Doh Machine weight approx. 6 t Space requirement approx. 2,350 x 2,240 x 2,500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED, AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear test machine is a CNC inspection machine with three linear axes for fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers a wide range of objective and subjective testing options with speeds up to 3,250 rpm and braking torques up to 95 Nm.

Stanje: pripravljen za uporabo (rabljen), Stanje: rabljeno Inventarna številka: 413002 Ta oglas je za Pall Palltronic Compact 200 napravo za testiranje integritete filtrov. Iedevl Aw Dopfx Ah Djih Enota je v popolnoma delujočem stanju in je takoj na voljo za dobavo.

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-1, System: Chamber filter press, demonstration model – as new Operating hours: None Application areas: Chamber filter press, laboratory press, pilot plant, wine press Design: Side-beam guided Filter plate size: 250 x 250 mm Iedsb Dluwopfx Ah Deih Number of plates: 8 Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available optionally, customized to medium Discharge: Open Filter area: approx. 0.56 m² Pressing volume: approx. 7 dm³ Plate bundle length: approx. 379.2 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Product-contact parts: PP & stainless steel Dimensions (L x W x H): approx. 960 x 400 x 360 mm Weight: 350 kg (photo shows identical machine) Pump system: Optional Purchase or rental: Machine inspections available by appointment at our facility. Note: Several units available. Please pre-order due to high demand. Are you interested in renting or purchasing this machine? Please contact us – we are happy to assist.

Stanje: pripravljen za uporabo (rabljen), Stanje: Rabljeno Iiodpovl Awwsfx Ah Dsh Inventarna številka: 413003 Ta oglas je za PALL Palltronic Compact Star. Enota je v popolnoma delujočem stanju in je pripravljena za takojšnjo dostavo. Priložena sta 2 nadomestna Epson tračna vložka in programski disk. Avtomatizirani test integritete, naj bo to preizkus naprej (forward flow) ali zadrževanja tlaka (pressure hold), je mednarodno priznan kot resnično objektivna in nedestruktivna metoda za ugotavljanje, ali filter izpolnjuje mikrobne zahteve in je pravilno vgrajen. Rezultati testa zagotavljajo jasen in natančen pokazatelj integritete filtra pred njegovo uporabo. Testiranje integritete z napravo Palltronic Compact Star je zanesljivo, stroškovno učinkovito in prijazno do uporabnika. Enota je zasnovana za izvajanje preizkusa zadrževanja tlaka, nedestruktivne metode, ki meri padec tlaka skozi določen čas. Test samodejno pritisne filtrirno ohišje na vnaprej določeno raven tlaka, počaka na stabilizacijo tlaka, nato izvede meritve in na koncu skozi odzračevalni ventil sprosti tlak. Popolnoma avtomatizirana naprava Palltronic Compact Star odpravi variabilnost rezultatov testiranj, ki se lahko pojavijo pri ročnih sistemih. Ponudi preprost, hiter in objektiven pregled integritete filtra.

Stanje: novo, Hydraulic cylinder replacement cylinder Iisdpfx Aod Hf Uweh Deh Chamber filter press We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats.

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-2, System: Chamber Filter Press – as new, demonstration model Operating hours: None Application area: Chamber filter press, pilot plant, wine press Design: Side-bar guided Filter plate size: 390x390 mm Number of plates: 14 Filter plates: Polypropylene (PP) Cake thickness: 25 mm Filter cloths: Available optionally, tailored to the medium Filtrate discharge: Open Filter area: Approx. 2.8 m² Chamber volume: Approx. 35 dm³ Plate stack length: Approx. 391 mm Filtration pressure: Approx. 15 bar Isdpfx Aob Dluyoh Doih Plate shifting: Manual Frame: Steel Product-contact parts: Polypropylene (PP) + stainless steel Dimensions (LxWxH): Approx. 1695x750x630 mm Weight: 610 kg (photo shows identical system) Pump technology: Optional Purchase or rental: Inspection of the systems can be arranged at our facilities by appointment. Additional: Several units available. Please order in advance due to high demand.