Fuegemaschine Furnir nakup rabljenega (295)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Hydraulic veneer press with electric heating plates • Bottom-cylinder design • BUSSE electric heating plates • Central control panel with all operating elements • Analog temperature display for both heating plates • Pressing pressure infinitely adjustable via pressure switch unit • Main switch • Two-stage hydraulic pump with automatic switching valve from low to high pressure • Safety pull cord • Rack compensation • CE compliant Pressing area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 90 t Stroke height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Space requirements (L x W x H) approx.: 2900 x 1250 x 1900 mm Weight: approx. 3,800 kg More information on request NEW MYLAR FOIL on both heating plates NEW Hydraulic cylinder seals Used machine notice: Gjdpfeyyn Rdex Af Sjir • Subject to errors in technical details and prior sale. • Prices stated are ex works – free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no claims to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, stiskalna sila: 100 t, širina mize: 1.350 mm, dolžina mize: 2.550 mm, skupna dolžina: 3.150 mm, skupna širina: 1.550 mm, skupna višina: 2.150 mm, skupna masa: 5.000 kg, No. 04525 Veneer Press Ott 300 K 2513 Used Very robust design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Panel dimensions: 2550 x 1350 mm (L x W) Total pressing force: 100 tons Heating: electric, replaceable heating elements Heating plates made of solid aluminium, covered with Mylar film Maximum temperature: 150°C Specific pressing pressure: 3.0 - 5.0 kg/cm² 4 press cylinders, each with 90 mm diameter Rack and pinion guide for press table Push-button operation for opening - closing - stop All-round emergency pull-cord with two-hand control setting Infinitely variable opening up to approx. 420 mm Automatic pressing pressure control via high-pressure manometer Pressure preset table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm (L x W x H) Weight approx. 5000 kg To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended The sale takes place as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Gisdpfx Ajy Aplzsf Ssr Delivery terms: ex stock

Stanje: dober (rabljeno), Leto izdelave: 1989, Pressing area: 2550 x 1350 mm Number of press cylinders: 6 Total pressing force: 140 t Opening width: approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load: approx. 26 kW Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5,500 kg Hydraulic Heated Platen Press Bottom-ram design Electric heating plates Pressing pressure steplessly adjustable via pressure switch Hydraulic pump Central control panel with all operating controls Digital temperature display for both heating plates Press cycle counter Safety rip cord Rack compensator Main switch Note for used machinery: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works prices – free loading included! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at the location. Giodpfjwd N Rmex Af Sjr • Special agreements are only valid in written form. (Enquiries will be answered only if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OTT model JU 2513 Hidravlična furnirska stiskalnica z elektro grelnimi ploščami Izvedba s podbatnicami BUSSE elektro grelne plošče Centralna nadzorna plošča z vsemi upravljalnimi elementi Analogni prikaz temperature za obe grelni plošči Pritisk stiskanja brezstopenjsko nastavljiv s tlačnim stikalom Glavno stikalo dvostopenjska hidravlična črpalka z avtomatskim preklopnim ventilom iz nizkega v visok tlak Varnostna vlečna vrvica Izravnava z zobato letvijo Omejevanje hoda CE Stisna površina: 2500 x 1300 mm Število stiskalnih valjev: 4 Skupna stiskalna sila: 70 t Obratovalna napetost: 3 x 400 V + N, 50 Hz. Skupna priključna moč: pribl. 20,3 kW Potreben prostor (D x Š x V) pribl.: 2900 x 1250 x 1900 mm Gijdpexgpaqefx Af Sor Teža: pribl. 3200 kg

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Gijdpfx Afofh Tmms Sjr Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Leto izdelave: 2025, stanje: novo, Vodoravna ločilna tračna žaga - VIKI 750-80: Premer valjev: 800mm Širina tračnega lista: 80mm Maks. širina reza: 750mm Gisdpoyz Srhsfx Af Sor Maks. višina reza: 350mm Min. višina reza: 1,0mm Hitrost rezanja: 0,1 - 18 metrov/minuto Motor: 22kW Pogonski motor: 1,5kW Dvižni motor: 0,75kW Dimenzije: 2500x2700x2200mm Teža stroja: 2000kg Napetost lista: hidravlična Digitalna nastavitev debeline reza Vključeno: - Avtomatski pomik naprej in nazaj - Dvojni pritisni valj Opcijsko: - 22kW frekvenčni pretvornik v ločeni elektro omari

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, stiskalna sila: 962 t, hod: 200 mm, širina mize: 1.400 mm, dolžina mize: 2.750 mm, delovna širina: 1.400 mm, obratovalna temperatura: 135 °C, obratovalni tlak: 290 letvica, višina obdelovanca (maks.): 200 mm, teža obdelovanca (maks.): 250 kg, premer cilindra: 270 mm, širina odpiranja: 200 mm, širina plošče: 1.400 mm, pritisk: 25 letvica, temperatura: 150 °C, We are offering this used ITALPRESSE MARK C/14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level, continuous cycle press system with top-mounted hydraulic cylinders Machine in perfect working condition CE safety standards compliant The machine can also be purchased together with other machines for a complete production line. Heated plate dimensions: 1400 x 2750 mm Number of heated plates: 2 pcs. Number of levels: 1 pc. Cylinder stroke: 200 mm Opening height: 200 mm Loading side: 1400 mm Specific pressure at 100%: 25 kg/cm² Total pressing force: 9620 kN Cycle time: 2–30 min Working temperature: 135°C Max. working surface temperature: 150°C Designated heating medium: thermal oil Number of pressing cylinders: 6 pcs. Diameter of pressing cylinders: 270 mm Retraction cylinders: 4 pcs. Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover size: 1200 x 2400 mm Moulds are excluded from this offer Available at additional cost Powered feed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8–40 m/min Photoelectric sensor control Electropneumatic vibrating device for the upper Mylar sheet Electronic flatness control Automatic switching to pressing speed Compressed air device in lower press table Cylinder base plates are insulated and drilled from solid material for water cooling Frequency control of feed speed Powered discharge roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet/control panel with Siemens S7 PLC Dismantling and collection at buyer's own expense Pickup location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or call us. Gijdpfsyxp Twsx Af Sjr

Stanje: rabljeno, Leto izdelave: 1984, Pritisna površina: 3000 mm x 1350 mm Odpiranje: 400 mm Ogrevanje: električno Površina plošč: ALU - eloksirana Izklop v sili: da / varnostna vrv Pritisni tlak: 140 t Število cilindrov: 8 Poraba toka: 34 A Moč: 22,4 kW Dolžina stroja: 3550 mm Gsdoyxgauspfx Af Ssir Širina stroja: 1550 mm Teža:

Stanje: dober (rabljeno), Leto izdelave: 1982, Velikost plošče 2200 x 1100 mm Odpiranje 350 mm Število etaž 1 kos Električno ogrevanje Skupni pritisk stiskalnice 65 t Moč motorja 1,1 kW Mere (d/š/v) 2540 x 1280 x 1900 mm Teža stroja ca. 2500 kg - Nihajno stikalo - Grelnik plošče z zlatim eloksiranjem Giedjyyqnxspfx Af Sjr

Stanje: zelo dobro (rabljeno), Tehnični podatki: Število batov: 6 Premer batov: 140 mm Priključek na centralno ogrevanje (CO) Dimenzije polic: 3500x1300 mm Svetla višina: 120 mm Hidravlični pritisk Moč motorja: 5,5 kW Napajanje: 380 V Gisdpfx Aow U Nvpsf Sor Skupne dimenzije: Dolžina: 4600 mm Širina: 1320 mm Višina: 2800 mm

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Hidravlična stiskalnica z grelnimi ploščami in termooljnim ogrevanjem, model COLOMBO REMO HPC 150 Prevrtana jeklena plošča Giedpfjyyzwdex Af Sor Za les, furnir, kompozitne materiale, pohištvo, plošče ipd. Uporabna velikost plošče: 3450 x 1400 mm 8 cilindrov, premer: 80 mm Največja stisna sila: 150 t Vmesna delovna plošča (3 delovne plošče, 2 delovni komori) Hidravlični črpalni motor: 4 KM Ogrevanje: termo olje Teža: 9.000 / 10.000 kg Napetost: 380 V/50 Hz

Stanje: zelo dobro (rabljeno), Popolnoma delujoča furnirna stiskalnica OTT model JU2511/70 Plošče: 255x110 cm (odlično stanje) 2×6,8 kW električno ogrevanje Godpfx Ajytykuof Ssir Preizkusno delovanje možno kadarkoli.

Stanje: dober (rabljeno), Leto izdelave: 1975, Funkcionalnost: popolnoma funkcionalen, Lisper za furnir - 3300 x 1350 mm - Zunanje mere: 4000 x 1650 x 2450 mm - Leto izdelave: 1975 - Pribl. 5.500 kg - Električne grelne plošče, brez vdolbin Gsdpfox Akuzsx Af Ssir - HP 120 - Višina stiskalnega prostora: 400 mm - 6 cilindrov - Zobniško vodilo - z varnostno vrvico Pošiljanje možno za doplačilo!

Stanje: rabljeno, Leto izdelave: 1976, Površina stiskanja: 2500mm x 1250mm Odpiranje: 360mm Grelna plošča zgoraj: električna Grelna plošča spodaj: okvarjena Površina plošč: ALU - eloksirano Pritisk stiskanja: 90t Število cilindrov: 4 Poraba toka: ca. 33A Dolžina stroja: 3000 mm Širina stroja: 1500 mm Teža: 4000kg Gijdjx Edl Ejpfx Af Ssr

Stanje: rabljeno, Leto izdelave: 1987, Površina stiskanja: 2550mm x 1250mm Gedpfx Aeyt E Rmjf Seir Odpiranje: 400mm Ogrevanje: električno Površina plošč: ALU - eloksirano Zasilni izklop: da, nožna letvica Pritisni tlak: 80t Število cilindrov: 4 Tokovna poraba: 32,6A Dolžina stroja: 3000 mm Širina stroja: 1500mm Teža: 4000kg

Stanje: dober (rabljeno), Leto izdelave: 1990, 1x VROČA STISKALNICA ZA FURNIR “SORMEC” TIP 350X130 Hidravlična vroča stiskalnica za les, plošče, pohištvo, vrata, kompozite in različne materiale Tehnični podatki: Dimenzije plošče mm 3500 x 1300 1 UPORABNA DELOVNA PLOŠČA Ogrevanje plošče z vročo vodo Skupni pritisk 50 ton Odpiranje mm 300 8 valjev, premer 85 mm Kotliček za vodo ni vključen Skupne dimenzije mm 4500 x 1600 x 2500 h Gijdpfx Afjyv Izbj Ssr Teža približno 5000 kg Rabljeno, v dobrem stanju.

Stanje: dober (rabljeno), Kód: 0328 Značka: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE standard Hidravlična stiskalnica za kompozitne materiale in masivne površine, kalupe in dekorativne plošče, primerna za uporabo v letalski, letalsko-vesoljski, lesarski, pohištveni, notranjeoblikovalski, avtomobilski, ladjedelniški, gradbeni, energetski, obrambni, športni in javnoprevozni industriji ter drugih področjih – CE standard – Leto izdelave 2005 Tehnični podatki: Št. masivnih jeklenih plošč: 5 kosov (1450 x 500 mm) Gisdpfx Aoyuyl Iof Sor Št. batov: 3 kosi Ogrevanje z diatermičnim oljem Skupni pritisk: 420 ton Delovni diagram – glej priložen diagram Največja moč: 9,3 kW Polna obremenitev toka: 19 A Rezervoar za olje se nahaja na vrhu stiskalnice ter ima kontrolno steklo za preverjanje nivoja olja Regulator temperature tekočine (olja) Dvoročno upravljanje za zapiranje stiskalnice Varnostne svetlobne pregrade (fotocelice) Fiksni varnostni zaščitni pokrovi

Stanje: pripravljen za uporabo (rabljen), Dolžina police 2500 mm Širina police 1200 mm Gjdpfxoyynzpj Af Seir 4 hidravlični bati po 75 mm Svetla višina 400 mm Ogrevanje z vodo

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, vhodni tok: 81 A, vhodna frekvenca: 60 Hz, vrsta vhodnega toka: trifazni, skupna dolžina: 1.830 mm, skupna širina: 1.618 mm, skupna višina: 2.400 mm, skupna masa: 5.000 kg, obratovalna temperatura: 140 °C, premer cilindra: 65 mm, širina odpiranja: 100 mm, Shelf press for veneer, plywood, MDF boards, chipboards, solid wood, etc. Manufacturer: JOOS Model: HPS 20 Year of manufacture: 2021 Total pressing force: 200 kN 4 cylinders ⌀ 65 mm x 400 mm Gijdjt Eq E Sepfx Af Ser Maximum hydraulic working pressure: 150 bar Pressure: 2.0 daN/cm² 5 heating plates, each 1000 mm x 1000 mm Working temperature: 0℃ - 140℃ Stepless temperature control. Timer for setting operational time; after the set time elapses, the press opens automatically. Heating power – 5 x 12 kW Total power – 64 kW (81A, 60Hz) Weight: 5000 kg Brand new press – never used Complete technical documentation included.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Pressing area: 3000mm x 1300mm Opening: 450mm Heating: electric / thermal oil Maximum temperature: 120°C Platen surface: stainless steel Gisdpfx Afshpl U Io Ser Press opening: automatic - timer / manual Emergency shut-off: yes, pull-cord Pressing force: 120t Number of cylinders: 6 Power supply: 36A Power consumption: 21 kW Machine length: 3600mm Machine width: 1800mm Weight: 4500kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, stiskalna sila: 70 t, Glavni pogon Gijdpfx Afox D D Nne Ser Pritiskalna sila: 686 kN Ta stiskalnica za furnir OTT ST 1611/60 je bila izdelana leta 1996. Največja pritiskalna sila je 70 ton, pritiskalne plošče merijo 1300x1611 mm, moč stroja pa je 10,1 kW. Plošče so električno ogrevane, kar povečuje učinkovitost. Izkoristite priložnost za nakup te stiskalnice za furnir OTT ST 1611/60. Za več informacij nas kontaktirajte. Tipi uporabe: Stiskanje / Laminiranje

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina police 3500mm širina police 1300mm Gsdpfoyxwzcsx Af Ssir 8 hidravličnih cilindrov premer cilindrov 85mm vgrajeno olje ogrevanje napajanje 380V

Stanje: rabljeno, Leto izdelave: 1970, Year of manufacture: 1970 Total pressing force at 320 bar: 80 tonnes Number of hydraulic cylinders: 6 rams Motor power: 1.1 kW Heating-up time: approx. 20 min. Price ex works. Gijdewx Rrnepfx Af Sjr

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Bürkle furnirska stiskalnica S 80, Letnik izdelave približno 1982, Zunanje mere: 3080 x 1550 x 1800 mm, Teža: 4500 kg, Tlačna sila: 80 t, 6 cilindrov, Površina stiskanja: 2500 x 1300 mm, Ogrevalne plošče pregledane, Hidravlični pogon, Masivna izvedba, Dobro stanje, Gjdpfx Aeyvhkvsf Seir Popolnoma delujoča Cena iz skladišča Pošiljanje možno ob doplačilu!

Stanje: zelo dobro (rabljeno), Dolžina police: 2500 mm Giedpfeyw H H Ssx Af Sor Širina police: 1300 mm 4 hidravlični bati Svetla višina: 400 mm Ogrevanje na vodo