Fabrik nakup rabljenega (73)

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, TRANSPORTER OSTRUŽKOV 1200MM Zglobni trakasti transporter z izhodno višino pribl. 1200 mm, primeren za: • Dolge jeklene ostružke Njdpfxex A Dn Uj Adyowb • Kepe ostružkov • Volnene ostružke Za suho in mokro obdelavo Brezplačno nakladanje Takoj na voljo

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 99-908.06, hitrost pomika os X: 199 m/min, delovna višina: 100 mm, Razrezovalna linija PAUL model 14 Leto izdelave: 1997 Motor žage 7,5 kW Pogonski motor 4 kW Pogonjenih spodnjih valjev: 6 Nepogonjenih zgornjih valjev: 6 Minimalni čas reza: 0,2 sekunde Maksimalna podajalna hitrost: 3,33 m/s Nwjdpfoybbnqsx Adyob Rezov na minuto: 120 Minimalna vhodna dolžina: 300 mm Maksimalna vhodna dolžina: 7000 mm Maksimalna debelina lesa: 100 mm Širina lesa: 380 mm Minimalni leseni prerez: 12 x 40 mm Maksimalni leseni prerez: 45 x 380 / 100 x 200 mm Maksimalna teža lesa: cca 70 kg Minimalna fiksna dolžina: 140/30 mm Vstopni trak: 5200 mm Izhodni trak: 6100 mm s 4 izmetalniki (1000 mm, 500 mm ...) Maksimalno podajanje: 5000 mm Video delujočega stroja na zahtevo.

Stanje: dober (rabljeno), Leto izdelave: 1991, Stroj za upogibanje gradbenih jeklenih mrež, upogibni stroj za gradbene jeklene mreže - Proizvajalec: Maschinenfabrik Bock, hidravlični stroj za upogibanje gradbenih mrež tip U50-09 - Prehodna širina: 2500 mm - Upravljanje: z ročico - Dimenzije: 3560/1000/1100 mm - Teža: 660 kg Nodpsyc Rr Ujfx Adyjwb

Stanje: zelo dobro (rabljeno), Horizontal baling press, 5000 mm length, 800 mm width, 12 cylinders, 5 hold-down devices Nwjdpfx Asl D T D Eedysb

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: x-axis travel: 690 mm y-axis travel: 400 mm z-axis travel: 550 mm B-axis (table): 360° Control: Siemens 840 D Spindle speed: max. 15,000 rpm Tool clamping system: DIN 69893 standard Tool holder: HSK-A63 Tool magazine: chain magazine, 12 positions Traverse speed (x/y/z axis): 40 m/min Total power requirement: 195 kW Machine weight approx.: 13.0 t Travelling Column Machining Centre - The machining unit consists of 3 NC machining axes and 1 NC rotary table axis - Equipped with rotary indexing table, type SKH-NC 4/029; Ø=460 mm; table plate clamped Ø500x20 mm; max. table rotation speed 22 rpm, 4x 90° indexing Nsdpfxju Idl Sj Adyjwb - Operating panel: SIEMENS - Spindle type: DRF-WE-255-N-W-15-30, 15,000 rpm, spindle power = 30 kW - Chip conveyor: Knoll type 400K-3/280; discharge height 1,150 mm - Spindle cooling unit: SCHIMBKE type DK 80 V; 3.36 kW (internal coolant supply)

Stanje: rabljeno, Leto izdelave: 2004, Technical Details: X-axis travel: 1500 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm CNC control: TNC 530 Spindle operating hours: not yet known Milling spindle speed range: 1st gear: 30 to 930 and 2nd gear: 930 to 4000 / stepless rpm Tool holder, horizontal/vertical: SK 50 (DIN 69871 / DIN 69872 Form A) Spindle torque: 1000 Nm Swiveling spindle head left and right: 90° Feed rate: 1 - 6000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Table clamping area (L x W): 1600 x 800 mm Table load capacity: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. (LxWxH): 3.1 x 4.7 x 2.6 m Cooling filter dimensions: 1.9 x 1.6 x 1.4 m Required floor space approx. (LxWxH): approx. 38.5 m² Applications: Milling, drilling, tapping, boring with direct encoded linear measuring systems Nedpfeu Nc Rijx Adyswb The guides of all 3 axes are boxways Milling head positioning controlled +/-90° Internal and external coolant supply Milling spindle rated motor power: 22 kW with integrated hydraulic unit up to 100 bar operating pressure with coolant system, high-pressure pump 60 bar (internal coolant supply), nominal flow rate 20 l/min, and low-pressure pump 4 bar (external coolant supply), as well as spray gun Compact belt filter RESY REBER SYSTEMATIC GmbH, type KBF 452/710 Hinged belt chip conveyor DGS, type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO

Stanje: rabljeno, Leto izdelave: 1978, Données techniques : Surface de fixation de la table : 1970 x 400 mm Distance broche/table : min./max. 150 / 250 mm Avance rapide : 1 / 2 m/min Vitesse de rotation de la broche de fraisage : 112 ... 1400 / 12 incréments tr/min Cône de la broche de fraisage : DIN 2019 = n°40 (SK40) Réglage axial manuel : 150 mm Avance de la broche : 0,012 / 0,025 / 0,05 mm/tr Plage d'avance - horizontale : coulisseau de fraisage : 8...100 / 12 incréments mm/min Nwedpfx Asu Ndhiedyob Puissance totale requise : env. 8,4 (10,5 kVA) kW Poids de la machine env. : 3 000 kg Dimensions de la machine env. LxlxH : 3,05 x 2,7 x 2,0 m Fraiseuse à rainures Application : fraisage de rainures droites et hélicoïdales. Fraisage de multiples rainures avec séquence automatique programmée. Autres caractéristiques : - Distance axe broche / bord inférieur du contre-support : 55 mm - Déplacement axial de la broche du contre-palier : 50 mm - Déplacement du coulisseau de fraisage horizontal 1000 mm (automatique + manuel) et vertical 100 mm à la main + max. 5 mm automatiquement/hydrauliquement Équipement : - Bac à copeaux 470x300x300 mm - Divers accessoires/équipements d'aide.

Stanje: rabljeno, Technical Details: Nwedpfx Aju N D S Ujdysb Machine weight approx.: 4.0 t Machine dimensions LxWxH: 1.8 x 1.8 x 0.9 m Machine table with 5 rotary indexing tables for multi-side machining Application: Multi-side machining of workpieces in rotary transfer machines in a single operation on 5 rotary indexing tables equipped with clamping fixtures. Design: Round, stationary base body with 5 rotary indexing tables arranged in a pentagon layout and a centrally mounted rotary table. Description: Central rotary table = pentagon design, diagonal 830 mm; circumscribed circle Ø 873 mm, side length 513 mm 5x rotary indexing tables, arranged as a regular pentagon on the machine body, pitch circle Ø = 1280 mm, table design as truncated square 380x380 mm, clamping via 4 Röhm taper clamping units and 1 central centering flange, 360° rotatable, workpiece Ø approx. 730 mm Operation/drive is hydraulic Sold as is.

Stanje: dober (rabljeno), Leto izdelave: 1992, Škarje za gradbeno armaturno mrežo, podobno kot giljotinske škarje, škarje za pločevino, hidravlične škarje -Proizvajalec: Maschinenfabrik Bock, hidravlične giljotinske škarje za armaturno mrežo tip 2550 -Širina reza: 2500 mm Nwedpfx Adsyanqvoyeb -Maks. zmogljivost rezanja: Ø 12 mm dvojno pri razmiku 100 mm -Motor: Dietz 7,5 kW -Prostor potrebovan: 3020/2000/H1320 mm -Transportne dimenzije: 3130/1080/1465 mm -Teža: 2000 kg

Stanje: generalkompletno obnovljen (rabljeno), The C11 MKL cross-cut optimization line, offered by Wood Expert Industry, represents a modern technological solution specifically designed for industrial wood processing and optimizing operational workflow in woodworking shops. All processing line equipment is manufactured by Paul Germany and was fully overhauled in July 2025, with zero operating hours since revision. Paul C11 MKL lumber optimization line components: Inclined conveyor belt 9.0 m/230 mm - Ideal for automatic and efficient transport of wood pieces to the processing area, equipped with a guided belt and robust fixing parts for transport stability. Measuring station with luminescent scanner and photocell - Enables precise identification of the beginning and end of the processed pieces, with dedicated lower rollers for high-accuracy measurements. Nedpfew Emf Rsx Adyowb Pressure roller unit - Ensures correct alignment and pressing of pieces from 250 to 4200 mm, with manual adjustment possible according to material thickness. Reinforced marking rails, left and right - Perform automatic pre-marking of cutting positions for increased efficiency and accuracy during subsequent processing. C11 MKL optimizer – CNC cross-cutting station - Features a robust welded steel frame, 500 mm TCT blade, 5.5 kW servo-driven motor, variable speed, and advanced feeder system with lower/upper rollers for precise piece guidance. Electric adjustment of upper rollers allows for automatic adaptation to wood thickness. The system includes automatic waste evacuation, extraction ports, CE-compliant safety features, and advanced cutting quality options (blade with 132 conical teeth). Evacuation system - Includes 11.5 m/230 mm conveyor belt and ascending waste conveyor (3.0 m/500 mm with collection hopper), optimizing material flow and waste removal. Length sorting system - Equipped with pneumatic ejectors and basic sorting equipment, it facilitates automatic sorting and unloading of pieces into two evacuation positions, increasing line productivity. Maxi8 Premium operator terminal and optimization software - 17'' touchscreen, dust-protected, remote diagnostics, Linux-based, with dedicated optimization software (up to 60 cut lists, 9 quality grades, 400 preset lengths/list), advanced statistics, network integration options, and USB data import/export. Control and automation equipment - Standardized electrical cabinets, control panels, and complete installation and wiring, using high-quality components for intensive operation. Benefits of integrating this line: - Full automation of cross-cutting processes, substantially reducing human error. - Increased efficiency and yield through optimization of cutting lists and automatic length sorting. - Adaptability to various thicknesses and dimensions of processed pieces. - Advanced digital control and remote diagnostics for quick interventions. - Reliability, reduced maintenance costs, and high CE safety standards. This optimization line can be customized for various types of wood processing units, ensuring efficient and tailored operation for each client's needs.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel Nwjdpfxex A U Nce Adyob • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: rabljeno, Test pump, pressure testing device, measuring device, pressure test pump, pressure testing pump - Manufacturer: Junginger, mobile pressure testing unit - Pressure display: 40 bar - Dimensions: 790/480/H775 mm Nwodpofnaaisfx Adyob - Weight: 47 kg

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck, precision three-jaw chuck - Manufacturer: SCA Skand Chuckfabriks, precision three-jaw chuck, chuck size Ø 230 mm - Jaws: individually and fully adjustable - Through-hole: Ø 66 mm Nwjdpfx Adoux Safoyjb - Bolt circle: Ø 193 mm / M12 - Dimensions: Ø 230 x 130 mm - Weight: 21.2 kg

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck Nsdeuypylspfx Adyjwb - Manufacturer: SCA Skand Chuckfabriks, three-jaw chuck, chuck size Ø 110 mm - Bore: Ø 25 mm - Pitch circle diameter: mm - Dimensions: Ø 110 x 115 mm - Weight: 4.8 kg

Stanje: dober (rabljeno), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, STC-ref.: G-791-0121 Karl Mayer stroj za pletenje mreže, letnik: 1980 Format: 12 palcev, -- 4,06 m Oprema: - za senčna platna za teniška igrišča - za vrtne pregradne mreže - za zaščito pred vetrom - največja širina materiala: 160 palcev, 4,06 m - tip: R 4 n1 M-FSM Nwjdpfxet Rhyks Adyob - gramatura: 70 g/m² – 180 g/m² - veliko rezervnih delov vključenih - GANG753 -->Na voljo od: 11/2024

Stanje: rabljeno, Leto izdelave: 1977, Proizvajalec: BOSCH – STRUNCK Model: FKL A 06 Leto izdelave: 1977 Tip: Avtomatski polnilni stroj Potopne polnilne glave Polnilne črpalke na komplet: 6 enot 1 skupina črpalk do 100 ml 1 skupina črpalk do 200 ml Nastavitev hoda bata: mehanska Moč motorja: 0,37 kW Laminaren tok Nodpox R Diwsfx Adyjwb Sistem shranjevanja polnilne glave z zaprtim krogom za čiščenje. Dimenzije stroja: 100 x 80 x 245 cm Video delovanja stroja na voljo.

Leto izdelave: 1979, Stanje: rabljeno, - KOM 1557 - General Information / Technical Data: Well-maintained chip conveyor with high-level discharge. Please refer to the images and nameplates for technical specifications. Both listings are equipped with integrated coolant pumps. Year of manufacture: 1978 Order number: 790504 Note: Nwjdjgg Sabspfx Adyob The system is in stock at our facility and can be inspected under power. The hinged belt is in good condition.

Leto izdelave: 1983, Stanje: rabljeno, -KOM1561- General / Technical Data: Well-maintained chip conveyor & high-discharge system for CNC lathe or similar machines Nedpsgg Sbnofx Adyewb Remarks: The unit is in stock and can be inspected under power at our facility. The hinge belt is in good condition.

Stanje: rabljeno, Leto izdelave: 1977, Tehnične podrobnosti: Premer honanja: 125 mm Hod: 500 mm Izlet: - mm Hitrost brusilnega vretena: 26-1200 (12 stopenj) vrt/min Min. premer honanja: 30 mm Maks. premer honanja: 165 mm Pomik mize: 800/150 (maks.) mm Vpenjalna površina mize: 500 x 1000 cm Skupna priključna moč: 4,22 kW Teža stroja pribl.: 0,15 t Dimenzije stroja (D x Š x V) pribl.: 1,30 x 1,20 x 2,70 m Obstaja premična miza, ki se premika v vzdolžni in prečni smeri Ročno mazanje s hlajenjem Stroj je namenjen honanju Nihajno gibanje v hitrem pomiku možno med dvema nastavljivima koncema Nwodpfx Adjw Rv Taoysb

Stanje: dober (rabljeno), Power: 16 kVA Nwodpfx Aehc Syzedyeb

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1994, številka stroja/vozila: 12145 MAG, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, proizvajalec krmilnikov: Power Automation, model krmilnika: PA 8000 HS, vrsta laserja: CO₂ laser, proizvajalec laserskih virov: TRUMPF Lasertechnik, model laserskega vira: TruFlow 6000, laserske ure: 53.000 h, laserska moč: 6.000 W, valovna dolžina laserja: 10.600 nm, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.000 mm, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, natančnost pozicioniranja: 0,01 mm, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, vrsta hlajenja: voda, skupna dolžina: 8.000 mm, skupna širina: 9.000 mm, skupna višina: 5.000 mm, hitri pomik na osi Z: 30 m/min, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, dolžina gredi: 10.600 mm, Oprema: CE označba, dokumentacija / priročnik, hladilna enota, Due to business closure, we offer for sale: Used 5-axis laser cutting and welding system with 6,000-watt CO2 laser: Manufacturer: Maschinenfabrik Arnold, Ravensburg Model: Full flying optic, 12145 MAG Year of manufacture: 1994 Working ranges: X-axis: 4,000 mm Y-axis: 2,500 mm Z-axis: 1,000 mm C-axis: 400° B-axis: +/- 120° Nedpfex E Udnex Adyswb Machine frame: Welded steel construction in open "C" design; Y-axis with gantry drive Linear axes with spindle drive, rotary axes with timing belt Position feedback: Rotary encoder Workpiece mounting: 3 modular tables with T-slot system CNC control: Power Automation PA8000 HS Aperture to processing optics: 100 mm Processing optics aperture: Cutting: 35 mm; Welding: 50 mm Cutting head: Precitec system Welding head: Arnold system CO2 laser: TRUMPF TruFlow 6000 with ECQ unit, telescope, and DWS mirrors for beam shaping - Laser source year: 2008 Operating hours: - Beam on: approx. 10,600 h - Laser on: approx. 53,000 h - In 2024, all gas coolers as well as resonator optics were replaced (TRUMPF invoices available) Laser cooling system: - Heat exchanger unit by KLH, year 2008 - Cooling tower by Rehsler, year 2008 The laser system can currently be inspected under power and is available immediately. All information without guarantee. Prices are net plus applicable VAT. Ex works, unpackaged. Dismantling and loading to be carried out by the buyer; support can be provided within our capabilities. Further details upon request or during an on-site inspection. Sale exclusively to commercial customers; no warranty or returns.

Stanje: dober (rabljeno), Sprossen and mitre punching machine, sprossen punch Nsdpfx Adeif Hurjyewb - Manufacturer: Rammefabriken, mechanical corner notching machine - Intermediate spacing: 100 mm - Adjustable depth: 65 mm - Dimensions: 1700/600/H1080 mm - Weight: 118 kg

Stanje: kot nova (razstavni stroj), Semiconductor protection Brand: Klöckner Moeller Type: DIL SM 16 V-k Nwedjmxi U Sspfx Adyob 400 Volt 16 A 7.5 kW Unused from stock

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6860 0007, Please provide us with your offer price. Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain. ----- Scope of delivery: Machine, loading system, conveyor belt, workpiece carriers Technical data of the machine: Nodjvbgiijpfx Adyowb 5-axis grinding center including oval feed belt and loading gantry 12-position tool changer with HSK 63 Maximum travel distance X-axis: 500 mm Maximum travel distance Y-axis: 650 mm Maximum travel distance Z-axis: 650 mm Table size: 500 x 650 mm Cut detection Nordmann dressing spindle Oil supply via central factory supply

Stanje: rabljeno, Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150 359 - 11683, For sale: PS160 (2 units) and PS140 (1 unit). One offers 250 MP, the other 140 t. The PS160 is one of the complete machines and is operational; the other PS160 does not include the control cabinet. Nwjdpfx Aet Ucpbedyeb Cgebttvst Ucpbod E Set The machines are available for sale individually or as a set. Please inquire by phone or email!