Testiranje Tiska nakup rabljenega (9.962)

Stanje: zelo dobro (rabljeno), RMS Type: SW 3509 + Amplifier TGD 6000-000.00 and Fan Test Manager SWR 900 Power Amplifier: TGD 6000 Vibration Exciter: SW 3709 High-Pressure Fan HVM 80-100 GL 270 RMS Electrodynamic Vibration Test System: Technical Data: Performance Data Max. Vector Force Sinus: 7.5 kN Max. Vector Force Random: 6.75 kN Max. Vector Force Shock: 13.1 kN Frequency Range: 0 - 3000 Hz Mass of Vibrating System (Dyn.): 9 kg Primary Resonance (unloaded): 2.5 kHz Max. Amplitude (Sinus): 18 mm (Random, Shock): 26 mm Max. Velocity (Sinus): 1.5 m/s (Random, Shock): 2.5 m/s Max. Acceleration Sinus Vibrating system (unloaded): 833 m/s² Extra Payload 10 kg: 394 m/s² Extra Payload 30 kg: 192 m/s² Extra Payload 50 kg: 127 m/s² Max. Acceleration Random Extra Payload 30 kg: 173 m/s² Max. Acceleration Shock Vibrating system (unloaded): 1450 m/s² Extra Payload 30 kg: 335 m/s² Stray Field Without Counterfield Coil On Table Surface: 20 mT 120mm Above Table Surface: 7 mT With Counterfield Coil On Table Surface: 10 mT 120mm Above Table Surface: 2 mT Vibration Isolator Operating Range Vertical/Horizontal Resonance Frequency: 2.7 Hz Operating Air Pressure: 5 bar Pneumatic Weight Compensation Max. Weight Compensation: 250 kg Operating Air Pressure: 2.3 bar Cooling Vibration Exciter: Air Min. Cooling Airflow: 9 m³/min Max. Exhaust Air Temperature (at room temp. 35°C): 80°C Iijdpfxou Tud Ho Ah Doh Power Amplifier: Air Heat Dissipation to Room Air: 1.5 kW Emission: Sound Pressure Level 1m Distance at 1.6m Height: 105 dBA Electromagnetic Field SW 3709 Typical: 1.5 mT (50Hz) Typical: 0.5 mT (100Hz) Electromagnetic Field TGD 3000 Typical: 150 HT (50Hz) Dimensions / Weights Table Diameter / Thread: 224mm / M8 Vibration Exciter with Integrated Isolators: 970 × 695 × 950 mm (W × D × H) Weight: 1200 kg Power Amplifier: 550 × 700 × 2075 mm (W × D × H) Weight: 270 kg Cooling Fan: 839 × 582 × 900 mm (W × D × H) Weight: 80 kg Connection Data: Mains Voltage +6/-10% 3 x 400V, 50Hz Connected Load: 18 KVA Power Consumption (sweep mode sinus): 12 kW Total Weight approx. 2000 kg Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in technical data and information!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Pressure: 45 tons Installation height: 205/305 mm Iiedegfvnnspfx Ah Djh Table: 700 x 450 mm Ram: 700 x 360 mm Ram adjustment: 50 mm Stroke: 10 - 50 mm Strokes per minute: 80 - 400 Power requirement: 11 kW Weight: 7,200 kg Height: 3,100 mm Siemens S7 control system Feed with gripper

Stanje: zelo dobro (rabljeno), Pressing force: 300 TON Model: 2MR Year of manufacture: 2000 Table dimensions: 1,750 x 1,250 mm Slide adjustment: 160 mm Continuous speed (variable): 10–30 spm Slide stroke: 250 mm Shut height: 500 mm Main motor power: 32 kW Ijdpfx Aoq N Etzjh Deih Hydraulic safety: present

Stanje: dober (rabljeno), Resato HBU-B160 Gas High-Pressure Workshop Test System In the oil and gas industry, everything revolves around the extraction of petroleum and natural gas. One of the main challenges is to utilize equipment optimally in order to maximize production from available resources. Various high-pressure applications can contribute to this goal. Pressure testing guarantees the quality and safety of components used in oil and gas production. By injecting a chemical fluid, the well is stimulated. High-pressure systems use controls to manage and regulate back pressure and fluids. This enables more secure extraction of oil and gas. Manufacturer: Resato Test System: HBU Model: HBU-B160 Max. Pressure: 200 bar Max. Capacity: 1570 cc Max. Pressure: 7 bar 2 x Gas Cylinder Holders 3 x Gas Cylinder Carts Digital control panel missing Further new and used items can be found in our shop! International shipping costs on request! Iedpfx Ajr Hmihoh Doih

Leto izdelave: 1999, Stanje: dober (rabljeno), We are selling the membrane press for kitchen doors or door frames, etc. Manufacturer: Italpresse, Model: Form Air. Year of manufacture: 1999. Iiedsd Ew Tbepfx Ah Doh Working area: 2330 x 780 mm. Inspection possible. Complete documentation included.

Stanje: kot nova (razstavni stroj), - Press force: 700 kN - Press size: 2500 x 1250 mm - Medium heated (water), incl. heating unit Ijdpfxjwaznj Ah Deih up to a temperature of 85°C. - Incl. Joos A.B.S. system for protection of the heating plates in case of incorrect loading Price on request!

Stanje: zelo dobro (rabljeno), Haida Model: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Units: g, kg, N, lb (selectable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Isdpfx Aor Ixq Rjh Dsih Test speed: 0.1–500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping range: 0–7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Pressure: 125 tons Lateral frame passages: yes Installation height: 380 mm Table surface: 1100 x 700 mm Ram surface: 700 x 350 mm Stroke: 01-120 mm Max. strokes per minute: approx. 70 Iijdpfxsdvb Tfs Ah Deh Power requirement: 22 kW Weight: 8,500 kg Height: 2,900 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 50 h, vlečna sila z obremenitvijo: 25.000 N, Universal Testing Machine, Type H25KT for tension, compression, bending, shear, etc., in accordance with EN ISO 7500-1, ASTM E4 The H25kS is a state-of-the-art universal testing machine. The system is engineered in compliance with current EU radiation protection and safety regulations (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum voltage within the machine is 48 volts. Special features: • Large, easy-to-read liquid crystal display with backlight • Switchable between graphical and numerical display modes • Alphanumeric data entry • Speed range: 0.001 to 1000 mm/min • High return speed: 0.001 to 1000 mm/min • Precise crosshead positioning • Robust load frame • Output report including mean value and standard deviation via printer • Wide range of test software for various standards running on Windows • RS232 interface for integration into computer systems • Load cell force indication accuracy: 0.5% across the full range • Displacement indication accuracy: 0.001 mm • Equipped with force and position alarm system • 32-bit motor controller • 20% digital weight compensation during load cell capacity check • Automatic motor alarm for over/undervoltage and overheating Specifications: • Force measurement accuracy: +/- 0.5% of displayed force from 2% to 100% range • Position measurement accuracy: +/- 0.01% or 0.001 mm • Speed accuracy: +/- 0.005% of selected speed Iodpjw A Skajfx Ah Doih • Operating temperature: 0 to 38°C • Humidity range: 10% to 90% Technical Data: • Dual-spindle benchtop model • Maximum capacity: 25 kN in tension and compression • Maximum travel: 1100 mm without grips/fixtures • For further details, please refer to the brochure Dimensions: Height: 1600 mm Width: 650 mm Depth: 450 mm Weight: 120 kg Power supply: Machine: 50-60 Hz - 2000 W Mains: 220/240 VAC

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Vötsch Thermal Shock Test Chamber VT 7012 S2 Systems for Rapid Temperature Change Thermal shock testing examines the resistance of components, devices, and other products to rapid changes in ambient temperature. Test specimens are subjected to quick temperature shifts in air, with alternating upper and lower temperature loads. These cyclic loads and accelerated aging caused by thermal changes allow weak points on the test specimen to be detected. - Vertical arrangement of test chambers - Ball screw drive ensures safe guidance of the specimen basket - Basket load capacity: 50 kg (VT3 7012 S2) - Specimens are secured by mesh grids on all sides of the basket - High recirculation rate, short temperature change times, and uniform temperature distribution in the test chamber - Hot chamber can be used as a temperature storage unit; cold chamber as a temperature cycling unit - Touch panel for convenient programming and graphical display of simulation programs - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Thermal Shock Test Chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A External dimensions: Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions: Width: 470 mm Depth: 650 mm Height: 410 mm Year of manufacture: 2005 Protection rating: Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Temperature performance data for single-chamber operation: Temperature range: Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +/- 2 K (stabilized state) Temperature deviation spatially: +/- 2 K (in the basket, stabilized state) Heating rate hot chamber: 11 K/min Cooling rate cold chamber: K/min Heating rate cold chamber: 2 K/min Cooling rate hot chamber: K/min Observation window: 355 x 355 mm Iiedpfx Asph Uz Ueh Deh Tube port: 67 mm Weight: 1000 kg Further items—new and used—can be found in our shop! International shipping costs on request!

Stanje: rabljeno, HYDRAULISCHE PRESSE SMG PRESSKRAFT: 300 t HUBLÄNGE: 700 mm LEISTUNG: 30 kW TISCHOBENMAßE: 1500 (1600) x 1300 mm TISCHUNTENMAßE: 1500 (1600) x 1300 mm ZIEHKISSEN: 100 t HUBLÄNGE ZIEHKISSEN: 280 mm Iiedetndu Uopfx Ah Djh GEWICHT: 28.000 kg VOLLSTÄNDIG GENERALÜBERHOLT – WIE NEU ALLE KOMPONENTEN ERNEUERT (DICHTUNGEN, PUMPEN usw.)

Stanje: kot nova (razstavni stroj), Technical Data: Maximum pressing force: 800 kN Adjustment range: 10 – 100 % Total pressing area: 3100 x 1300 mm Iijdpfxsfhqhde Ah Djh Specific pressure at full capacity: 2.0 daN/cm² (kg/cm²) 6 cylinders, 80 mm diameter, 400 mm stroke Hydraulic operating pressure: 265 bar Press chamber height: 400 mm Heating Plates: Electric heating plate 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, scratch- and abrasion-resistant. Thermal high-pressure insulation between the heating plate and press table. Maximum operating temperature: 120°C.

Stanje: zelo dobro (rabljeno), S & A Test Chamber We offer you an S & A test chamber for parametric testing. Temperature Range -55 °C to 200 °C (LCO2) -65 °C to 200 °C (LN2) Temperature Change Rate 15°C / min (Standard Option) 60°C / min (Fast Option) Stability ± 0.2 °C (including effects from mains voltage, ambient temperature between 15° and 45°C, and aging) Uniformity ± 1.0 °C max from -65°C to -55°C Ijdon Arl Sopfx Ah Djih ± 0.5 °C max from -55°C to +125°C ± 1.0 °C max from +125°C to +200°C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight: approx. 61 kg Type: 4365A Condition: used Scope of delivery: (See image) (Changes and errors in the technical specifications and details reserved!) If you have any further questions, please feel free to contact us by phone.

Leto izdelave: 1983, Stanje: rabljeno, Pressure: 75 tons Table: 630x620 mm Slide: 500x450 mm Installation height: 370 mm Isdpfsctl Dtox Ah Djih Slide adjustment: 80 mm Lateral column passage: 300 mm Stroke adjustable: 8-100 mm Strokes per minute: 7-160 Power requirement: 11 kW Weight: 7 tons Height: 3050 mm SIRI roller feeder for material 300x3 mm Hydraulic overload protection Hydraulic Ortlinghaus clutch with auxiliary brake

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, Desktop DMA Series Dynamic Mechanical Analyzers Iisdpfsrxfy Uox Ah Djh DMA25 and DMA50 are "desktop" dynamic mechanical analyzers that offer a high force range and outstanding flexibility. From glass transition determination to immersion tests, they provide powerful and highly cost-effective thermomechanical testing platforms. Applications of the Metravib Desktop Series Dynamic Mechanical Analyzers DMA25 and DMA50 for a Wide Range of Applications • DMA and TMA tests • Determination of glass and secondary transitions • Static and quasi-static tests: creep, stress relaxation, tensile, compression, etc. • Especially suitable for the characterization of polymers and composites • Testing of materials submerged in liquids • Analysis of material moisture dependence • R&D / Quality control / Training / Laboratory work

Leto izdelave: 2009, Stanje: Okvarjen nosilec rezervnih delov (rabljen), For sale as a parts donor Iodpjqgb H Dsfx Ah Djih

Stanje: zelo dobro (rabljeno),

Leto izdelave: 2020, Stanje: novo, The PT-400 belt press is a machine designed for extracting apple must. This process takes place between the machine’s belt and appropriately positioned press rollers. The extracted juice is pumped directly into the pasteurizer tank. The entire unit is constructed from AISI 304 stainless steel. TECHNICAL SPECIFICATIONS: - Capacity: up to 500 kg of apples per hour - Juice yield from pressed apples: up to 75% Iodpfx Ahsfgl Hfe Deih - Installed power: 0.8 kW, 230V - Water consumption: up to 4 l/min - Weight: 500 kg - Belt width: 400 mm - Adjustable belt speed - Juice tray with screen, mesh diameter: 1 mm - Juice pump included

Stanje: rabljeno, Testing device, personal grounding tester, Safety Pips - Manufacturer: Wolfgang Warmbier, personal grounding tester Ovp - Model: Safety Pips Ref.: 7100.181 - Operation: Battery powered, 9V - Box dimensions: 115 x 110 x H70 mm - Weight: 0.2 kg Isdpfotuyc Dox Ah Djih

Stanje: rabljeno, Leto izdelave: 1991, Pressure 300 t Column gap 1350/1000 mm Iisdjvn U S Sjpfx Ah Djh Stroke 500 mm Machine weight approx. 20 t Table area 1900x1600 mm Ram area 1900x1600 mm Table height 1000 mm Stroke and pressure shut-off Working feed 10 mm/s

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, The advantages of DMA+300, DMA+1000, and DMA+2000 DMA and TMA testing Precise measurement of viscoelastic properties Determination of glass and secondary transitions Static and quasi-static tests: creep, stress relaxation, tension, compression, etc. Fatigue testing on material and industrial component samples (with controlled waveform) Crack growth testing Iodpfx Ahorxf Rtj Djih Analysis of solid, pasty, and liquid materials: elastomers, plastics, composites, biomaterials, etc. Especially suitable for the characterization of polymers and composites (polymerized materials, tracking of the polymerization process, simultaneous DMA/calorimetry, fatigue) Especially suitable for the testing and characterization of elastomers (Mullins effect, Payne effect, frequency sweep, heat build-up, crack growth testing, etc.) Analysis of material moisture dependence Comparison and classification of complex materials for design purposes R&D / Quality control / Education / Laboratory work DMA+ series with high force Solutions for material characterization The devices in the DMA+ series are dynamic testing machines based on an innovative single-piece test frame design with high rigidity. They are dedicated to the precise analysis of the viscoelastic properties of the most advanced materials. The one-piece DMA+ test frame with high rigidity has been developed to offer the largest stiffness and frequency analysis ranges as well as top-class ergonomics. The Dyna+ software enables a wide range of DMA tests to track the dependency of a material's viscoelastic properties on numerous parameters. With the optional fatigue module of the Dyna+ software, test capabilities can be expanded to advanced fatigue tests, heat build-up tests, or crack growth tests.

Stanje: dober (rabljeno), Leto izdelave: 2013, Helium Leak Detector Manufacturer: Leybold Model: Phoenix L300i Condition: very good Connection: 230V Ijdpfx Ahst Uru Te Deih Delivery time: ex stock (subject to prior sale)

Stanje: rabljeno, Contour measuring instrument, contour measuring device, contour graph, profilograph, roughness tester, roughness measurement, roundness measurement, surface roughness probe Isdpek H R Hujfx Ah Dsih - Manufacturer: Hommel, stylus holder for roughness measuring instrument - Model: KVA Type P2/115 - Stylus travel: s = 12 mm - Box dimensions: 345/130/H85 mm - Weight: 1.7 kg

Stanje: rabljeno, Leto izdelave: 1998, Pressure 40 t Stroke 250 mm Total power requirement 6 kW Machine weight approx. 3 t Iodevnwfnopfx Ah Djih Frame/gap width 600/350 mm Table surface 860x620 mm Ram surface 860x620 mm Table height 900 mm Manual lever operation Pressure cut-off

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Helium leak detector Manufacturer: Leybold Model: Phoenix Quadro EU Condition: As new, ready for use, unused from 2022 Iedpfx Ajt Urlroh Deih Connection: 230V Delivery time: ex stock (subject to prior sale)