Tester nakup rabljenega (204)

Stanje: rabljeno, Brinell: 260 mm Rockwell: 220 mm Throat depth: 150 mm Microscope magnification: 70x Load capacity: 187.5 kg Test height: max. 250 mm Cpedpfx Aecxxzaefxou Machine weight approx.: 0.25 t Space requirement approx.: 0.3 x 0.55 x 1.02 m Semiautomatic hardness tester for serial and single-piece testing according to Vickers and Brinell methods, equipped with a projection measuring device on the machine head, electronic dwell time setting, vibration-insensitive loading via buckling springs, in very good condition.

Stanje: rabljeno, Leto izdelave: 2020, Precise Tests for Durable Materials An abrasion testing machine is an indispensable tool for material testing, helping to assess the abrasion resistance of products and thus ensure the longevity and reliability of materials. These devices are particularly important in industries such as automotive manufacturing, footwear production, textile industry, and plastics processing, where resistance to wear and abrasion is critical. With an abrasion tester, you can precisely measure how well materials withstand repeated contact and friction. Codpfx Afjxw Ulmjxepu Abrasion testing machines deliver accurate, repeatable results that help you optimise the quality and durability of your products. They simulate realistic conditions in which materials are subjected to mechanical wear, enabling you to determine key performance indicators such as coefficient of friction, degree of wear, and surface changes. This allows for targeted development and enhancement of products intended for use in demanding applications. An abrasion tester operates according to various testing methods and standards, tailored to the specific requirements of your industry. Whether you are testing rubber, plastics, textiles, or leather—an abrasion tester lets you quickly and easily determine how well your material is protected against abrasion and wear. These measurements are essential for guaranteeing the durability and performance of your products in their intended applications.

Stanje: rabljeno, številka stroja/vozila: 83040, Outreach: 150 mm Test height: 200 mm Cjdpfob Dkh Nsx Afxjpu Space requirement: 350 x 600 x 1410 mm

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MINVAP VPXpert K 10c, Proizvajalec: Grabner Instruments Messtechnik GmbH - Tip: MINVAP VPXpert K 10c - Letnik: 2017 - Tehnični podatki: > Izmerjen temperaturni razpon: 0 do 120 °C (programabilno s strani uporabnika) > Stabilnost temperature ±0,01 °C > Temperaturni profili: posamezna temperatura, stopničasto ali ramponsko > Razpon tlaka: 0 do 1000 kPa (0 do 145 psi) > Ločljivost tlaka: 0,1 kPa > Toleranca tlaka: 0,1 kPa > Razmerje para/tekočina: 0,02/1 do 100/1, nastavljivo glede na izbrano metodo > Napajanje: 90–264 V AC, 45–63 Hz, 200 W (izmenični tok) > Teren uporaba: DC/AC pretvornik 12V / 200W > Dimenzije (Š x V x G): 253 x 368 x 277 mm (10 x 14,5 x 10,9 in) Csdpfxjxt H Hho Afxepu > Teža: 9 kg (20 lb) > Natančnost podatkov: > Ponovljivost ±0,3 kPa (0,04 psi) > Ponovljivost ±0,7 kPa (0,10 psi)

Stanje: rabljeno, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurements ELABO type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for measuring dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations pursuant to EN60204, Part 1. Serial No.: 0064016 Year of construction: 2004 Csdpfef Axn Aex Afxopu Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V delivers a highly stable DC voltage with low ripple. One output terminal provides high voltage, the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of construction: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression to VDE 0871 Rated power: 14 W Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO type 90-9B.3ZM92510 Serial No.: 0097588 Year of construction: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile rack - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many more ELABO devices available under stock numbers 57819, 57820, and 57821

Stanje: rabljeno, Test bench, test station, measurement station, test device, measuring device, tester for HV, PE, IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage tester The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial no.: Year of manufacture: 2003 Cedpfx Afsd Dc Unjxspu Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with low ripple. One output terminal supplies high voltage, the other terminal is earth-referenced and can be set to a potential up to 300 V max. Serial no.: Year of manufacture: 2005 Supply voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 Watt Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connector unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices under stock numbers 57820 and 57821

Stanje: pripravljen za uporabo (rabljen), Na voljo je Lansmont preizkuševalni stroj za padce z vedrom za izvajanje standardiziranih padnih preizkusov za oceno odpornosti izdelkov na udarce. Preskusna nosilnost: 80kg, največja globina paketa: 610mm, razpon višine padca: 305mm–1800mm, natančnost ravnosti: +/-2°, premer vodilne palice: 76mm, debelina plošče: cca. 13mm, dimenzije stroja (Š/G/V): cca. 920mm/1410mm/2640mm, teža: cca. 230kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Csdoxhnr Ujpfx Afxspu

Leto izdelave: 2023, Stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma avtomatski SPEA in-circuit tester z igelnim ležiščem za SMEMA proizvodne linije. Tip: Inline ICT tester, reži: 2x768/Core, območje širine transporterja: 50mm-380mm, dolžina transporterja: 450mm, merilno območje upora: 1mΩ-1GΩ, merilno območje kapacitivnosti: 0,5pF-1F, merilno območje induktivnosti: 1µH-1H, dimenzije X/Y/Z: cca. 900mm/1000mm/1750mm. Vključno z različnimi podajalniki (8x2-56). Na voljo je dokumentacija. Možen je ogled na lokaciji. Cpodpfjxghn Hjx Afxsu

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Test method: Vickers Test forces: HV0.2 / 0.3 / 0.5 / 1 / 2 / 3 / 5 / 10 Scope of delivery: - Hardness testing device - Diamond indenter 136° Vickers - LED illumination - Cross table 135 x 135mm - Objective turret - Objectives 20X / 40X / 60X Optional: - VMS3 (video measuring system) - Digital micrometer screw - PC system Cpjdpfodmz Uzox Afxju

Stanje: rabljeno, TECHNICAL DATA Cedpfx Aouhb Iuefxepu - Brinell tests 3000 kg and 750 kg, HB in accordance with DIN EN ISO 6506-01 - Test height with table: 0–610 mm - Test height without table: 370–1,120 mm - Clamping surface on table: 500 x 600 mm - Clamping surface on base: 810 x 1,425 mm - Clamping range: 310–1,095 mm - Arm swivel: 220° - Test assembly rotation about its axis: 180° - Vertical lift of the test assembly: 750 mm - Footprint (without hydraulic unit): 810 x 2,155 mm - Height: 3,500 mm - Weight: 4,000 kg - Voltage: 3x 400 V - Frequency: 50/60 Hz - Installed power: 3.5 kVA ACCESSORIES - Control panel: Stiefelmayer - Optical measuring system: Zeiss - Measuring electronics: HM-Control - 2 measuring scales for impression size: Heidenhain - Signal lights: OK / out of tolerance - Statistical function - Output for PV printing - Table - Hydraulic unit

Stanje: rabljeno, TECHNICAL DATA - Hardness tester for monitoring in the production line of soft rubbers and elastomers as well as all products made of natural rubber. Csdpfx Asuhb I Iofxopu

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Suitable for testing the leak-tightness of steel drums, drum diameter: 574–598 mm, maximum drum weight: 30 kg, drum temperature: 10–50°C, with documentation. Cpedpfx Asm H Uqkefxeu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Safety tester with scanner for high voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in excellent condition. Cpodpfx Aoxqxw Tjfxeu The SEFELEC 506-S test device for electrical safety testing, a new generation EATON model, is based on ARM Dual Core technology components and controlled by a DSP. This technology provides the operator with optimal stability and repeatability of measurements. The high accuracy and test speed are tailored to the quality assurance requirements in production and incoming goods inspection. The sequencing function simplifies operation of the SEFELEC 506-S test station when integrated into a test setup or test bench. The 7” touchscreen of the new SEFELEC model series impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5 kVAC 500 VA and 6 kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2 TΩ range PE measurement at 32 A – 8 VAC, measurement 0 ... 1 Ω Optional: Test current 50 A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming as well as displaying active tests and results Integrated ARM Dual Core Control & Nand 3D technology for optimum precision, stability, and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-034: Particular requirements for measuring insulation resistance and for test equipment for dielectric strength) Shipping is possible upon prior arrangement. #8312-2

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Safety tester for high voltage test bench - EATON Sefelec 506-S The device was acquired in 2023 and is in TOP condition. The SEFELEC 506-S electrical safety tester, a new generation EATON model, is based on ARM dual-core component technology and controlled by DSP. This technology offers the operator optimal stability and repeatability of measurements. High measurement accuracy and speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequencer function simplifies station operation when integrating the SEFELEC 506-S into a test rig or test bench. The new SEFELEC series’ 7” touchscreen impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuation (ΔI) Burn mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE (protective earth) test at 32A–8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp-up, hold, ramp-down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming and displaying ongoing tests and results Integrated ARM dual-core control & NAND 3D technology for optimum accuracy, stability, and repeatability Integrated DSP allows for higher test speeds Large internal memory for storage of configurations and test results Cpsdjxqxt Iepfx Afxju Fully compliant with IEC 61010-2-034 (Safety requirements for electrical measurement, control and laboratory equipment – Part 2-034: Particular requirements for measurement equipment for insulation resistance and withstand voltage) Shipping available by arrangement. #8312-1

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), WIKI 90 is the top-of-the-line solution for automation and precision in Vickers and Knoop hardness testing: - Fully motorized system - Complete automation frees users for other tasks - Test forces are applied directly to the measuring axis by load cells and are electronically controlled in a closed loop Test load range: 0.01 - 50 kg Test methods: Vickers & Knoop Standard scope of delivery: - Hardness testing machine Cpsdpfx Afjg Ifl Toxou - 136° Vickers diamond indenter - Software (fully automated) - Color camera - Motorized 6-position turret - Objectives - Automatic X/Y cross table - PC system - 24" monitor - Dust cover - Operating manual We are happy to provide you with a detailed quotation. Detailed information can be found on our homepage under the section Hardness Testing Devices – Vickers.

Leto izdelave: 2023, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 530211, Features → Robust cast iron machine housing → Automatic application and release of test force → Automatic switching between objective lens and indenter → LED illumination → Digital measuring eyepiece → LCD color touchscreen display → Conversion to other hardness scales (e.g., HRC) → Easy operation Technical Specifications → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Testing method: Vickers Cjdpfxec Ipc Us Afxopu → Eyepiece 10X → Automatic objective turret → Objectives 10X / 20X / 40X → Test force application speed 50µm/sec → Maximum specimen height 210mm → Maximum specimen depth 160mm → Compliance: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Scope of Delivery → Hardness tester → Diamond indenter 136° Vickers → Flat test table Ø80mm → Prism support Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED illumination → Power cable → Accessory case → Operating manual Optional → VMS3 software (video measuring system) → Cross table 200x200mm (travel range 25 x 25mm) → Digital built-in micrometer (for transmitting edge distance to the VMS3 software) → Module "Automatic Measurement" (only in conjunction with VMS3 software) → PC system / monitor

Leto izdelave: 2023, Stanje: novo, - modern ergonomic design - manual testing sequence with analog dial gauge (reading accuracy 0.2 HR units) - easy operation and fast testing procedure - test chamber height approx. 185 mm - test chamber depth approx. 160 mm - dimensions 545x182x755 mm Cpedpfxjpbbc Hs Afxju Test load ranges: 60 / 100 / 150 kg Test methods: HRA/HRB/HRC Standard scope of delivery: - hardness tester - prism support - flat test table Ø150 mm - flat test table Ø50 mm - 1/16" ball holder with ball - 120° Rockwell diamond indenter - spindle guard - accessory case

Stanje: generalkompletno obnovljen (rabljeno), Loading device with test forces 1-250 kg - Vickers HV1 - HV120 - Brinell 15.625 / 31.25 / 62.5 / 187.5 / 250 kg - Rockwell HRA / HRB / HRC Scope of delivery: - Hardness tester - LED illumination unit - Objectives 70X / 140X - Scales 70X / 140X - Diamond indenter 136° Vickers - Diamond cone 120° Rockwell - Ball holder with 2.5mm ball Brinell Cpodpfx Asc Nl Ecefxsu - Flat test table Ø80mm - Flat test table Ø235mm - Prism support Ø80mm - Power cable - Operating manual with conversion tables Optional: - BVMS3 software

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), številka stroja/vozila: 520511, Features: → Robust cast machine housing → Automatic load application and removal of test force Cpedpfjc Ipckjx Afxeu → Automatic changeover between objective lens and indenter → LED illumination → Digital measuring eyepiece → LCD colour touch screen display → Conversion to other hardness scales (e.g. HRC/HB) → Easy operation Technical data: → Test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000) → Test method according to Vickers → Cross table 110 x 110 mm / travel distance 25 x 25 mm → Eyepiece 10X → Automatic objective turret → Objectives 10X / 40X / 60X → Max. specimen height 90 mm → Max. specimen depth 110 mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 50 kg → Power supply 230V / 50Hz Scope of delivery: → Hardness tester → Diamond indenter 136° → Cross table 110 x 110 mm → Eyepiece 10X → Objective turret → Objectives 10X / 40X / 60X → LED illumination → Power cable → Accessory case → Operating manual OPTIONS → VMS3 software (video measurement system) → Digital inbuilt micrometer (for transmitting the edge distance to the VMS software) → "Automatic measurement" module (only in conjunction with VMS3 software) → PC system / monitor

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, - Portable hardness tester for almost all applications Standard scope of delivery: - MKII hardness tester - Diamond indenter - Indenter protection cap - HRC reference test block (without calibration certificate) - HRB reference test block (without calibration certificate) - Fixture for flat and round components - Power supply unit - Sturdy carrying case - User manual The current data sheet is available on our website. Csdodzzvzspfx Afxepu

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: Miniload II, Rabljen mikroskop/mikrotrdotest Leica Miniload II Proizvajalec: Leica Microsystems Model: Miniload II Brez lastnega napajanja za osvetlitev Z objektivoma 50x in 10x Csdpjxr Ev Ssfx Afxopu

Stanje: rabljeno, Leto izdelave: 1957, Brinell 250 kg Rockwell 150 kg Throat depth 130 mm Cpsdpfx Afsu T R Tksxeu Max. test height 300 mm Machine weight approx. 0.150 t Space required approx. 650 x 530 x 1550 mm Testing methods: Rockwell, Vickers, and Brinell. This is a used device, therefore we sell under exclusion of any warranty.

Stanje: rabljeno, Leto izdelave: 1962, Rockwell. Brinell. Hardness tester for Rockwell measurement including base frame All technical specifications subject to change without notice. Codpfx Afjwugq Ssxepu

Leto izdelave: 2023, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 206RSD, Rockwell scales: HRC - HRA - HRD - HRB - HRF - HRG - HRL - HRM - HRR Standard scope of delivery: - Hardness testing machine - Indenter protection - Clamping cap - Diamond Rockwell indenter 120° - Ball holder with Ø1/16" ball - Flat test table Ø60mm - Prism support Ø60mm - Accessory box - Dust cover - Operating manual Cpedpfx Afec In U Isxju

Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1500/R, Loading device with test forces 1–187.5 kg - Brinell: 15.625 / 31.25 / 62.5 / 187.5 Cedpfx Afodb E Tfoxopu - Rockwell: HRA / HRB / HRC Scope of delivery: - Hardness testing device - Matte screen - Fresnel lens - Vertical illuminator - Threaded spindle with adjustment mechanism - Lighting unit - 70X objective - Evaluation unit - Ball holder with 2.5 mm ball for Brinell - 120° diamond cone for Rockwell - Flat test table Ø80 mm - Prism support Ø80 mm - Power cable Optional: - BVMS software (see 3-rath.de)