Tester trdote udarca

Bauart Professor Baumann Nr.523

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ Ppsdpfx Alowbknbetew ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 20281, Offer 23034 Technical specifications: - Max. grinding length approx.: 350 mm - Max. grinding width: 150 mm - Max. installation height with/without magnet: 150 / 210 mm - Grinding wheel stroke approx.: 200 mm - Clamping surface: 300 x 160 mm - Magnetic clamping plate: 250 x 150 mm - Grinding wheel dimensions approx.: 200 x 80 x 78 mm - Grinding wheel speed: 2800 rpm - Swivel range of grinding arm approx.: 180° - Manual arm clamping via clamping lever - Wet grinding system - Drive: 400 V / 1.85 kW - Required floor space approx.: W 850 x H 1650 x D 800 mm Ppedpfxjklxwke Altsw - Weight approx.: 350 kg

Stanje: generalkompletno obnovljen (rabljeno), Na voljo gumarska testna oprema 1 x reometer Alpha Production MDR (po želji v kontejnerju s pnevmatskim vzorčevalnikom) Ppjdpfxowmnlhj Altsw Naprava je preverjena, kalibrirana in opremljena z novo programsko opremo na novem tower računalniku!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 570 mm, izvrtina vretena: 62 mm, stružna dolžina: 1.250 mm, premer struženja nad ležiščem sani: 365 mm, višina središča: 280 mm, skupna masa: 4.000 kg, O F F E R We can offer you, subject to prior sale and errors excepted, ex stock without obligation: V D F - BOEHRINGER Cycle-Controlled Universal Lathe Model DUS 560 Year of manufacture 1998 / completely overhauled in 2008 --- Centre height 280 mm Max. swing diameter over bed 570 mm Max. swing diameter over cross slide 365 mm Cross slide/traverse travel 345/125 mm Distance between centres / max. turning length 1,250 mm Spindle bore 62 mm Infinitely variable spindle speeds, 2 ranges 3-500 / 15-2,500 rpm Infinitely variable longitudinal and cross feeds 0.01-50 mm/rev Rapid traverse longitudinal/cross 5 / 10 m/min Max. feed force cross/longitudinal 6.5 / 12.5 kN Max. workpiece weight between centers/with tailstock 400 / 1,000 kg Thread pitches 0.1 – 400 mm/pitch Spindle drive 15/21 kW Total drive 25 kW – 400 V – 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: • SIEMENS 2-axis cycle control Type 805 with direct input of all turning parameters via interactive interfaces and corresponding software; control and monitor integrated in the sliding door; with memory expansion and software for free contour programming, graphics, etc. • 2 electronic handwheels for fine adjustment of carriage travel in Z and X axes, and new joystick for rapid traverse +Z/-Z and +X/-X; Joystick for the main spindle with infinitely variable speeds – forward and reverse • Mounted 3-jaw chuck Model SCA Ø 300 mm, faceplate approx. Ø 500 mm, 4-jaw chuck Ø 315 mm, driving plate approx. 250 mm, single faceplate 500 mm, various jaws. • Mounted MULTIFIX toolpost Type CD with 5 different Multifix holders • Separate tool block for CAPTO tool holders with internal coolant supply, various holders partly with collet chucks • Tailstock with air bearing for easy movement, work lamp • Movable chip trolley with coolant pump and oil skimmer, 2 rear sliding doors • Separate control cabinet, adjustable spindle end stop, work lamp, etc. Pedpfsyqw Eqsx Altjpw Condition: very good – guides in very good condition, available for demonstration under power Please click here for a video of the machine: Delivery: ex stock – as inspected Payment: strictly net before delivery We look forward to your order. More lathes of all sizes available in stock – please inquire.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 0 mm Total power requirement: 7.5 kW OFFER We can offer you – subject to prior sale and errors excepted – the following, available from stock: GEIBEL & HOTZ CNC Horizontal Surface & Profile Grinding Machine Ppsdsx Haryspfx Altew Model: FS 6-Z CNC Year of manufacture: 1996 Maximum grinding length (table longitudinal travel 660 mm): 600 mm Maximum grinding width (cross travel max. 360 mm): 0 mm Maximum grinding height under wheel: approx. 375 mm Distance table – spindle centre min / max: 140 / 525 mm Standard magnetic chuck size: 600 x 0 mm Table clamping area: 820 x 0 mm Maximum table load: 400 kg Table speed: m/min Cross movement / table stroke: 3 - 40 mm Rapid cross/vertical feed: 5 m/min Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle speeds, adjustable: 1,000 – 3,000 rpm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 15 kW – 400 V – 50 Hz Weight approx.: 2,600 kg Accessories / Special equipment: • SIEMENS CNC Control type 840 D with comprehensive GEIBEL&HOTZ grinding software, user-friendly interface, text and graphic support, easy programming even for complex grinding wheel contours and fast linking of grinding operations • All standard grinding programs and cycles such as surface and multi-surface grinding with roughing – finishing – sparking out – return, plunge grinding, automatic dressing with compensation, etc. • Electronic handwheel for 3 axes • Table movement via toothed belt drive, allowing both very high and very low table speeds, ideal for profile grinding • Dressing device with swing diamond, mounted on left side of table, with automatic dressing cycle, compensation, and for profile dressing as well • Fixed dresser with interchangeable mounting, left side of table • Mounted sine table permanent electro-magnetic chuck approx. 600 x 200 mm, fine-pole • Wet grinding unit with separate band filter coolant filtration • Separate electrical cabinet, work lamp, various accessories, operating manuals Condition: Good to very good condition! Suitable for all grinding applications! Please click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net – upon receipt of invoice Always a large selection of grinding machines in stock – please let us know your requirements!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 850 mm, pomik po osi Z: 500 mm, model krmilnika: HEIDENHAIN 530, dolžina obdelovanca (maks.): 1.250 mm, širina obdelovanca (maks.): 850 mm, višina obdelovanca (maks.): 500 mm, teža obdelovanca (maks.): 1.200 kg, širina mize: 850 mm, višina mize: 640 mm, dolžina mize: 1.250 mm, največja hitrost vretena: 18.000 obr/min, razdalja od mize do središča vretena: 700 mm, število mest v zalogovniku orodij: 60, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, DECKEL MAHO DMC 100V Stroj po popolni obnovi. Vreteno po obnovi in zamenjavi ležajev Laserski merilnik orodij BLUM Zaradi reorganizacije podjetja imamo na prodaj: HITRO 3-OSNO OBRATNO ORODJE Proizvajalec: DECKEL MAHO Tip: DMC 100V LINEAR Krmiljenje: HEIDENHAIN 530 Letnik: 2003 Velikost mize: 1250x800 Hod: X 1000, Y 800, Z 500 mm Teža obdelovanca: max. 1200 kg Generalna obnova stroja 06.2025 Vreteno: HSK 63A 18000 obr/min Moč S1/S2 15kW/19kW Navor S6 40%ED 130Nm Menjalec orodij: 60-kratni Merilna sonda HEIDENHAIN Merilna sonda za orodje: BLUM laser Transporter odrezkov Notranje hlajenje (IKZ) Ppedpfjx Elxiox Altsw Stroj v zelo dobrem stanju, po popolni obnovi. Redno servisiran. Stroj je v stalni uporabi.

Stanje: dober (rabljeno), Leto izdelave: 2004, Drilling capacity in steel (diameter): 28 mm Throat depth: 300 mm Drilling stroke: 150 mm Distance spindle/table: 60–765 mm Distance spindle/base plate: 1,200 mm Spindle taper: MT 3 Thread cutting: M20/M24 Column diameter: 115 mm Table size: 510 x 425 mm Spindle speeds – stepless: 60–1,400 rpm Total power requirement: 1.4 kW Machine weight approx. 350 kg Space requirements approx. 1.9 x 0.6 x 0.9 m - Digital spindle speed display - Foot switch Ppodpjwgi Evofx Altew - Thread cutting device - Left/right rotation - 2-speed motor

Stanje: rabljeno, Leto izdelave: 1996, Diameter / mm Workpiece length / mm Length / mm MITUTOYO SURFTEST SV-500 surface roughness tester with OLZE measuring plate Size: 600 x 600 x 80 mm Nominal µm: 16 Ppodpfx Aotvm Smoltow Actual µm: 10.00 Net weight: 85 kg Information regarding the scope of delivery The package includes only the ordered product. Any additional decorative items or other objects shown in the product images are not included in the delivery.

Stanje: rabljeno, Leto izdelave: 1988, Manufacturer: Haacke Model: UW II A-CNC Psdeg Tvmbopfx Altspw Year of manufacture: 1988 Suitable only for step drills up to max. Ø 30mm Cross adjustment: 250mm Vertical adjustment: 250mm Grinding length: 400mm Weight: 1.4t Footprint: 2.5 x 1.2 x 1.9m Application: For grinding steps on step drills Accessories: Paper band filter, brand LKK Front lamella collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Stanje: rabljeno, Leto izdelave: 1965, Drilling capacity in steel (diameter): 40 mm Total power requirement: 4 kW O F F E R We can offer you, without obligation, ex stock, subject to prior sale and error: A L Z M E T A L L Heavy Duty Column Drilling Machine Model: AB 4 / SV Year of manufacture: approx. 1965 Serial number: 10024 Drilling capacity in steel: 60 / 40 mm Drilling capacity in cast iron: 55 mm Morse taper: MK 4 Throat depth: 340 mm Column diameter: 160 mm Quill stroke: 160 mm 3 feed rates: 0.09 / 0.16 / 0.28 mm/rev Table size: 700 x 550 mm Ppodpfx Alov S Iqcotjw Machined base plate: 450 x 600 mm Table adjustment (vertical): 750 mm Table rotation around column: 360° Installation height (lower table to spindle): approx. 1,200 mm Spindle speed range Step 1, infinitely variable: 60–210 or 200–600 rpm Step 2, infinitely variable: 130–400 or 400–1,200 rpm Total drive power: approx. 2.3 or 3 kW – 380 V – 50 Hz Weight: approx. 750 kg Accessories / Special features • 2-step gearbox and stepless speed adjustment via belt drive, pole-changing motor for 2 speeds • Automatic quill feed with depth stop and shut-off • Equipment such as drill chuck included Condition: good – ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We kindly ask for your order. Additional upright and column drilling machines are always in stock – please inquire with us.