Tenoner nakup rabljenega (412)

Stanje: zelo dobro (rabljeno), Kataloška številka 7759 TEHNIČNI PODATKI Krožna žaga: - maks. premer žaginega lista 350 mm - vreteno 30 mm - žagin list nastavljiv naprej/nazaj, gor/dol, kot - pnevmatski pomik agregata naprej/nazaj Hodpfx Abey Ry H Sjxsnn - zaščita za žagin list - motor 2,2 kW I. in II. vreteno rezkalnega stroja: - čepilno vreteno: - premer vretena 40 mm - delovna višina vretena 150 mm - vreteno blokirano - pnevmatski pomik agregatov naprej/nazaj - ročna nastavitev gor/dol - maks. premer rezkarja 300 mm - motor cca 7,5 kW - stranski voziček – ročni pomik - mere vozička dolžina/širina 1000x380 mm - kotno vodilo - pnevmatski pritiskač - mere dolžina/širina/višina 2600/3200 (za pošiljanje 2200)/1540 mm - teža 1450 kg PREDNOSTI – nemška proizvodnja – triosni (3-vreteni) – nelakirana – zelo dobro stanje – rabljena čepilna naprava Neto cena: 13.900 PLN Neto cena: 3.300 EUR Neto cena preračunana po tečaju 4,2 PLN/EUR (v primeru večjih nihanj tečaja se cena lahko spremeni)

Leto izdelave: 1996, stanje: zelo dobro (rabljeno), I am selling a double-end profiling milling machine EGURKO ORTZA PDA 56/2. Working width: 200 to 3000 mm Configuration left side / fixed: 3 swiveling side milling units Configuration right side / movable: 3 swiveling side milling units Top pressure conveyor belt. Hnsdpfx Asizrf Nebxjn Through-feed machine. Condition: Very good. Available immediately. Installed, can be switched on right away. Price per unit. 2 units in stock, immediately available.

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), I am selling a double-end tenoning and milling machine FRIULMAC IDRAMAT, year of manufacture 2007. Working width up to 2500 mm Configuration left side / fixed: 1 + 1 pc. cutting units top + bottom / 3.0 + 3.0 kW 1 + 1 pc. grooving saw units front + rear with synchronised feed Configuration right side / movable: 1 + 1 pc. cutting units top + bottom / 3.0 + 3.0 kW 1 pc. special milling unit top / 5.5 kW Material hold-down conveyor with top-side feed. Special construction, also suitable for edge sizing. Through-feed machine. Hjdpfxsib A E Aj Abxonn Siemens Simatic control panel. Condition: very good. Available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, I am selling a double-end profiling milling machine, SCM CONCEPT NT. Working width up to 3000 mm. Configuration left side / fixed: Hjdpfx Astv Rxbjbxonn - 1 pc. cutting unit - 1 pc. milling unit - 1 pc. movable jump milling unit Configuration right side / movable: - 1 pc. cutting unit - 1 pc. milling unit - 1 pc. movable jump milling unit Top pressure conveyor belt for material feed. Through-feed machine. Condition: Very good. Available immediately.

Stanje: zelo dobro (rabljeno), I am selling a double-end tenoner CELASCHI TSA 300. Working width up to 3000 mm Feed speed: 3-18 m/min. Left side / fixed configuration: 1 pc. cutting unit 4.0 kW 1 pc. milling unit 5.5 kW Right side / movable configuration: 1 pc. cutting unit 4.0 kW 1 pc. milling unit 5.5 kW Upper pressure belt with top-feed system. Throughfeed machine. Hnsdpfx Ajvxu Uhobxon Condition: Very good. Fully operational. Available immediately.

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good! Hedpfx Ajfzzhyobxenn

Stanje: dober (rabljeno), Leto izdelave: 1990, I am selling a combined tenoning machine with boring head BALESTRINI I2F. - One tiltable table with pneumatic material clamp. - Automatic bottom-up cut-off saw. - Milling head for tenon or finger joint production. Hodpfx Ashw Dfnobxjnn - Boring head for dowel drilling, 3-spindle, rotatable 360°, any position possible. - Automatic feed. End-position sensors for positioning. - Immediately available.

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), I am selling the Weinig Unitec 10 mortising and tenoning machine for window production. Year of manufacture: 1998. Equipped with OERTLI cutter heads. Immediately available. Unit price: €8,500. Three units available. Condition: very good! Hedpfx Ajfzzhkobxjnn

Stanje: kot nova (razstavni stroj), Leto izdelave: 2001, I am selling an automatic CNC machining center for BLOCK-HOUSE production, AUER BL100. Year of manufacture: 2001. Infeed table / Max. element length: 9.00m Tenoning cutter up to dia. 200mm / 4kW Horizontal milling cutter up to dia. 200mm / 4kW Hnedorccakopfx Abxon Vertical milling cutter up to dia. 200mm / 4kW Automatic feed system AUER Austria BL100MS programming Zebra label printer TOS Svitavy PWM 45.11 end-cut saw at the rear Ideal for timber construction! Available immediately.

Stanje: zelo dobro (rabljeno), Solo Machine - Universal Machine (first & second in a processing line) Second DEP in the line X10023 Electronic Control: OMRON Separate control cabinet and operator console Safety and soundproof enclosure No. 3+3 vertical support columns for work groups As the second machine, it processes panels with a depth of 1900 mm Min. useful working width (mm): 300 Max. useful working width (mm): 2500 Min. useful working thickness (mm): approx. 6 Max. useful working thickness (mm): 60 Cam distance (mm): 400 Adjustable feed speed (min/max) (m/min): 4-24 Total power: 65 kW No. 3 working units (for each machine side): - No. 1 universal milling unit (electro-pneumatically operated), spindle length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically operated), spindle length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically operated), spindle length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) NOTE: These three vertical universal milling units are CNC-controlled with horizontal and vertical adjustment. - Spare slot Hnsdpfx Abeyz Si Hjxjn

Stanje: zelo dobro (rabljeno), Solo machine - Universal machine (First & Second in a processing line) First DEP in the line X10023 Electronic control OMRON Separate electrical cabinet and operator console Safety and soundproof enclosure No. 2+2 vertical support columns for working units Min. useful working width (mm): 300 Max. useful working width (mm): 2000 Min. useful working thickness (mm): 6 Max. useful working thickness (mm): 60 Cam spacing (mm): 400 Adjustable feed speed (min/max) (m/min): 4–24 Total power Kw: 60 No. 4 working units (for each side of the machine): - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) Hnodpfx Abeyz Siaoxsn - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) NOTE: These three vertical universal milling units are CNC controlled with horizontal and vertical adjustment. - No. 1 standard universal milling unit (1.5 kW at 1470 rpm)

Stanje: dober (rabljeno), Automatic double-sided tenoning and profiling machine Celaschi, fitted with 5 units per side Hnjdpfetykxpex Abxjn

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Hnedjwhmdfepfx Abxen Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (First & Second in a machine line) Electronic control – Programmable Hjdpfx Abogz Alxexsnn With separate electrical and control panel Safe and soundproof enclosure No. 1 vertical column, for supporting work units Min. useful working width (mm): 220 Max. useful working width (mm): 3000 Min. useful working thickness (mm): 6 Max. useful working thickness (mm): 60 Retractable positioning cams, spacing (mm): 400 Feed (min/max) steplessly adjustable (m/min): 4–24 Total power: 40 kW No. 3 working units (for each side of the machine): 1 automatic scoring unit: 2.2 kW / 3.2 kW 1 chipping unit: 5.5 kW / 7.3 kW (RPM 3000 / 6000) 1 universal milling unit (electropneumatically controlled): 4 kW / 5.8 kW (RPM 3000 / 6000)

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (First & second in a production line) Control system: (CNC) NC 21, Homatic software Safety and sound-insulated enclosure No. 3+3 vertical columns to support the working units Min. useful working width (mm): Max. useful working width (mm): 3,000 Max. useful working thickness (mm): approx. 100 Max. workpiece length before stops (mm): 1,250 Retractable stop cams, spacing (mm): 1,000 Feed rate (min/max) continuously adjustable (m/min): approx. 8–25 Hsdpeh Nx U Nefx Abxsnn No. 4 work units (for each side of the machine): 1 automatic scoring unit (approx. 1 × 1.5 kW) 1 cutting/milling unit (approx. 1 × 4.5 kW) 1 universal milling unit (electro-pneumatically controlled, approx. 1 × 4.5 kW) 1 free space

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a production line) Electronic control programmer Safe and soundproof housing – OPTIONAL No. 4+4 vertical columns for supporting working units Min. useful working width (mm): 150 (approx.) Max. useful working width (mm): 3100 (approx.) Max. useful working thickness (mm): 180 (approx.) Retractable stops, spacing (mm): 500 (approx.) Feed rate (min/max), steplessly adjustable (m/min): 8–40 (approx.) No. 8 workstations (for each side of the machine): 1 automatic scoring unit Hnodsifz H Nopfx Abxjn 1 milling/planing unit 1 universal milling unit (electro-pneumatic control) 1 universal milling unit 1 profile milling (copying) unit with 2 vertical motors 1 sanding unit (with grinding wheel) 1 sanding unit (with sanding paper)

Stanje: rabljeno, Leto izdelave: 2003, Dvosmerni stroj za rezanje čepljev z avtomatskim podajanjem Hnsdpfjxrc Hzex Abxjn Tehnične značilnosti - Kapaciteta: Do 2400 kosov na uro - Kapaciteta: Zelo visoka zmogljivost (2400 čepov/uro) - Hitrost osi nosilca čepljev: 9000 obr/min - Največja dolžina čepa pri poljubnem nagibu: 100 mm + 2 R - Največja globina vstavljanja s standardnim orodjem: 40 mm - Najmanjša globina vstavljanja s standardnim orodjem: 10 mm - Največja odebelitev čepa: 25 mm - Moč motorjev nosilcev osi (2 x 4 KM): 8 KM - Motorski pogoni za vrtenje (2): 2 KM - Moč motorja za premik desne skupine: 1 KM

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 288.I.8, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and angles can be produced simultaneously at both ends of a solid wood component. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-relieved welded steel construction, large-scale machining units with carriers and slides made of cast iron, absolutely vibration-free. Designed for maximum operational safety and the highest production output. 3 kW milling motors. USER-FRIENDLINESS The new swiveling system of the machining units allows for short setup times. Whether the units are swiveled around the vertical or horizontal axis, the tool position always remains constant—that is, the swivel point always corresponds to the tool position. Even when the angle changes, the shoulder length of the workpieces remains constant. FLEXIBILITY The NOVA-3 is an exceptionally versatile processing machine. Thanks to its robust and reliable mechanics, the advanced design of the machining units, and its innovative swiveling system, both small, highly deformed workpieces and large components requiring powerful material removal can be machined with precision. For the latter, the solid machine structure and the motor power are decisive factors. Flexibility is further enhanced by the availability of various feed magazines; depending on requirements, customers can equip their machine with either the ADR or APPC automatic infeed systems. Workpieces are loaded from dedicated reference points. Finished pieces exit at the bottom of the machine, allowing the operator to easily remove them, transfer them to a conveyor belt, or deposit them in a container. No manual intervention is required; the operator only needs to load the magazine. Spindle diameter: 25 mm Spindle length: 70 mm Connection diameter: 2 x 100 mm Central lubrication Automatic or manual operation Automatic material feed and discharge Hedpfx Abevvvr Asxjnn Min./max. element length: 199.5 mm / 2030 mm (dimension A) Element thickness: 100 mm Width: 90 mm Universal adjustment range (B and F): +92° / -27° Universal angle adjustment (D and H): +45° / -20° Universal angle adjustment (E and M): +45° / -10° Spindle height adjustment (C and G): +62° / -5° Articulation height and width adjustment Spindle angle adjustment: 0° - 90° (vertical tenon) Cycle speed adjustment

Stanje: rabljeno, številka stroja/vozila: D 395T5, The NOVA-3 tenoning machine enables the simultaneous production of two rounded tenons of different sizes and angles on both ends of a solid wood workpiece. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-relieved annealed steel welded frame, large machining units with carriers and slides made from cast iron, absolutely vibration-free. Mechanical components designed for high operational safety at maximum production capacity. 3 kW milling motors. USER-FRIENDLINESS Short setup times are ensured by the new swiveling system of the machining units, which keeps the tool position constant both when swiveling on the vertical and horizontal axes; in other words, the swivel point always corresponds to the tool position. Even when changing the angle, the shoulder length of the workpieces remains unchanged. Hodpfxjxrpkmj Abxjnn FLEXIBILITY The NOVA-3 is an exceptionally versatile processing machine. Thanks to its large, reliable mechanical components, advanced design of the machining units, and innovative swiveling system, it can process both short, highly warped workpieces and large parts with high material removal rates, with equal precision. For the latter, the stable machine structure and powerful motors are decisive factors. Flexibility is further enhanced by the range of available loading magazines; depending on requirements, the customer can equip their machine with either the ADR or APPC automatic loader. Loading of the workpieces is performed from designated reference points. Completed parts exit from the underside of the machine, allowing operators to easily collect them, transfer them to a conveyor belt, or deposit them in a container—no manual intervention is required, with the operator only needing to replenish the magazine.

Stanje: dober (rabljeno), Leto izdelave: 1998 ZA 66 /95 Z laserskim prikazovalnikom linije reza Dimenzije: 5700 x 1500 x 1900 mm Paralelogramska miza nastavljiva do 60 stopinj 4 motorji Prirezovalna enota Višina reza: 290 mm Premer žaginega lista: 750 mm Motor 5,5 kW Hjdpfoy Am Elox Abxonn Prižagalna žaga Globina reza: 175 mm (list 450 mm) Globina reza: 225 mm (list 550 mm) Motor 10 kW Odsedne žage, vsaka 2,2 kW Globina reza: 125 mm Premer žaginega lista: 350 mm Nastavljivo do 45 stopinj

Stanje: rabljeno, Stroj za vzdolžno in prečno profiliranje parketa. Motorji 6+6. Hnedoy Hmlyjpfx Abxsn

Stanje: novo, Leto izdelave: 2025, Dimenzije (dolžina/širina/višina): 2150x1300x1780 mm Hedjvz Egyopfx Abxsnn Teža: 1000 kg Skupna priključna moč: 5,5 kW CNC oscilirajoči stroj za zaokroževanje čepov CHAIRMAX - CNC krmiljenje z uporabniku prijaznim zaslonom na dotik - maks. dimenzije obdelovanca (vodoravno): 140 x 80 mm - maks. širina čepa navpično: 80 mm - maks. premer čepa: 80 mm - maks. globina čepa: 70 mm - število vrtljajev: 0 – 8.500 1/min - motor vretena 3,0 kW - premer vretena 30 mm - napetost 400 V, 50 Hz - servo motor X-os: 1,0 kW - servo motor Y-os: 1,0 kW - naklon mize: navzgor 0–15° navzdol 0–30° vstran 0–20° - 2 pnevmatski vpenjalniki obdelovancev - avtomatska črpalka za mazanje - CE skladnost - delovni tlak: 6 bar - priključek za odsesavanje: 120 mm - Dimenzije (D=2150, Š=1300, V=1780 mm) - Teža: 1000 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 2650 x 1400 x 1700 mm Weight: 1950 kg Total power requirement: 11.4 kW CNC double-sided oscillating round tenon milling machine CHAIRMAX DUO - CNC control with user-friendly touchscreen operation - Min./max. working length: 250 – 1200 mm - Min./max. working width: 10 – 115 mm - Min./max. working height: 10 – 60 mm - Max. tenon length: 70 mm - Milling spindle speed: 12,000 rpm - Spindle diameter: 30 mm - Milling motor power: 2 x 3.7 kW - X-axis servo motor: 2 x 1.0 kW - Y-axis servo motor: 2 x 1.0 kW - Total power: 11.4 kW - Voltage: 400 V, 50 Hz - 2 pneumatic workpiece clamps - Automatic lubricant pump - CE conformity Hnjdpfx Asvz Euwsbxen - Working pressure: 6 bar - Extraction connection: 2 x 100 mm - Dimensions: L = 2650 mm, W = 1400 mm, H = 1700 mm - Weight: 1950 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height) 2160x1080x1650 mm Weight 1500 kg Total power requirement 12 kW CNC Tenoning Machine FRAMEMAKER - Min. / Max. workpiece width 10 - 120 mm - Min. / Max. workpiece thickness 10 - 50 mm - Min. / Max. tenon depth 5 – 45 mm - Min. / Max. drilling depth 5 – 45 mm - Tool rotational speed 9,000 – 12,000 rpm - Milling spindle motor 5.5 kW - Spindle diameter 30 mm - Tool dimensions diameter 130 x 90 mm - Tool holder ER 25 - Min. / Max. drill diameter 4 – 16 mm - Drill rotational speed 12,000 – 18,000 rpm - Drill spindle motor 3.7 kW - Servo motor X-axis 1.0 kW - Servo motor Y-axis 1.0 kW - Servo motor Z-axis 0.75 kW - Total power 12 kW - Drive via ball screw - Linear guides - Machine frame made of solid cast iron - Operating pressure 6 bar - Extraction nozzle 2 x 100 mm Hnsdpfx Abevz Ha Uoxen - Dimensions L=2160, W=1080, H=1650 mm - Weight 1500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, 1 x AUTOMATISCHE DOPPELZAPFENFRÄSE SPANEVELLO Modell STDL mit 3 + 3 Spindeln TECHNISCHE DATEN: - ARBEITSBREITE: 170 – 3000 mm - WERKSTÜCKDICKE: 5 – 120 mm - OBERER ANDRUCKBALKEN MIT ANTRIEBSRIEMEN UND KUPPLUNG - UNTERE VORSCHUBKETTEN, BREITE: 70 mm - AUTOMATISCHE SCHMIERUNG DER MASCHINENBETTEN - AUTOMATISCHE SCHMIERUNG DER VORSCHUBKETTEN - MITNEHMERABSTAND: 340 mm - VARIABLE VORSCHUBGESCHWINDIGKEIT: 1,5 – 20 m/min - SPANNUNG: 380V / 3Ph / 50Hz AUSSTATTUNG DER MASCHINE: - LINKSSEITIGE EINLAUFFÜHRUNG, HORIZONTALE HANDVERSTELLUNG 1-2 SPRUNG-/SCORE-EINHEIT - MOTOR: 1,5 PS – 3000 U/min - WELLENDURCHMESSER: 35 x 55 mm L – max. Werkzeugdurchmesser 200 mm 3-4 ABTRAG-/FRÄSEINHEIT – 5 PS – 3000 U/min - WELLENDURCHMESSER: 40 x 55 mm – max. Werkzeugdurchmesser 250 mm - ABSAUGANSCHLUSS: Durchmesser 140 mm - SCHWENKBAR 0–90° Hjdpfxoyurqpe Abxjnn - Vertikale/horizontale Handverstellung mit Digitalanzeige 5-6 FRÄSEINHEIT – 5 PS – 3000 U/min - SCHWENKBAR 0–90° - Vertikale/horizontale Handverstellung mit Digitalanzeige - WELLENDURCHMESSER: 40 x 95 mm – max. Werkzeugdurchmesser 250 mm - ABSAUGANSCHLUSS: Durchmesser 120 mm MASCHINE IN GUTEM BETRIEBSZUSTAND VOR AUSLIEFERUNG IN UNSERER WERKSTATT GEPRÜFT