Dvostranski stroj za rezanje čepov

BALESTRINI NOVA 3

Stanje: rabljeno, Leto izdelave: 2021, Numerical control MEGA 300 TS Panel height 60 mm PVC/ABS up to 3 mm Feed speed up to 22 m/min Electronically adjustable working height via CNC Motorized pressure belt with increased pressure Infeed system for small panels Panel support guide with electronic CNC adjustment Side roller conveyor with idle rollers for panel support Anti-adhesive unit Straightening unit with two electronically adjustable CNC motors Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA adhesive with glue tank and premelter Pressure roller group for straight profiles with electronically adjustable CNC pressure rollers Anti-adhesive group Milling unit with 2 motors and automatic tilt adjustment End trimming unit with 2 vertically stacked motors Trimming/corner rounding group with 2 tilting motors electronically adjustable via CNC Corner rounding unit with 4 motors Edge scraper unit electronically adjustable via CNC Todpfet Hal Djx Altja Glue scraper unit Oscillating brush unit Hot air dryer unit

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Tedpfefxpbmox Altoa

Stanje: zelo dobro (rabljeno), skupna dolžina: 3.000 mm, skupna širina: 1.500 mm, Stiskalnica za plošče v zelo dobrem delovnem stanju + finger jointing Grecon Todpfx Ajt Uduxjltja

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W230-028, stiskalna sila: 80 t, trajanje garancije: 24 meseci, pritisk: 250 letvica, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45kW) equipped with vertical tying. This baler has already been completely refurbished in our overhaul workshop. Tedpfxjtvat Ts Altea The refurbishment was carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including a 2-year warranty. The press is supplied with the following options: * support stands, * intermediate hopper, * bale exit chute, * wire spool platforms

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 155423, skupna masa: 4.707 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 597 l, barva: rdeča, moč: 400 kW (543,85 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 400 kW (543,85 KM), nazivna (navidezna) moč: 538 kVA, neprekinjena moč: 400 kW (543,85 KM), neprekinjena (navidezna) moč: 538 kVA, skupna dolžina: 4.100 mm, skupna širina: 1.600 mm, skupna višina: 2.200 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: FPT/Iveco, vrsta hlajenja: voda, poraba goriva (kombinirana): 100,6 l/100 km, poraba goriva (mestna vožnja): 51,5 l/100 km, poraba goriva (izven mesta): 70,63 l/100 km, gorivo: dizel, kapaciteta rezervoarja za gorivo: 597 l, kapaciteta baterije: 100 Ah, napetost baterije: 12 V, vhodna napetost: 12 V, vhodna frekvenca: 50 Hz, vhodni tok: 32 A, obratovalna temperatura: 25 °C, temperatura okolja (min.): −25 °C, okoljska temperatura (maks.): 45 °C, višina krmilne omare: 2.200 mm, dolžina elektro omare: 4.100 mm, širina krmilne omare: 1.600 mm, vrsta zaščite (IP koda): IP65, vrtljajska hitrost (min.): 1.500 obr/min, temperatura: 25 °C, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, mobilni rezervoar za dizel, The Bredenoord 500 KVA generator is a reliable and versatile solution for both temporary and long-term power requirements across various environments. This genset is ideally suited for mobile applications and complies with emission standards. The efficient FPT/Iveco engine, combined with a Stamford generator, delivers outstanding performance and low operational costs. The generator is housed in a sound-insulated enclosure that ensures minimal noise emissions, making it ideal for use in noise-sensitive environments (super silent). The enclosure features thick, oil-resistant sound insulation and external sockets with circuit breakers for enhanced safety. Tjdpfx Aswgkrkeltoa With a 597-liter fuel tank, the generator offers up to 6 hours of autonomy under continuous operation. The system operates on diesel, HVO, or GTL fuel, providing flexible fueling options. Technical Specifications: - Model: Bredenoord 500KVA - Nominal Power: 538 KVA - Maximum Power: 538 KVA - Engine: FPT/Iveco C13TE7 - Generator: Stamford brushless alternator (AVR) - Output: 220–538 kVA - Voltage: 230/400 V, 50 Hz - Speed: 1,500 rpm - Noise Level: 80 dB(A) at 7 meters - Fuel Tank: 597 liters - Autonomy: - 100% PRP: 6 hours - 70% PRP: 8 hours - Engine Output: 400 kW - Battery Charger and Engine Heater: Standard - Control Panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 4.10 m x 1.60 m x 2.20 m - Weight: 4,707 kg - Emission class: Fuel Consumption: - 100% PRP: 100.6 L/h - 70% PRP: 70.63 L/h - 50% PRP: 51.5 L/h Options: - Engine heater - Battery charger - 3-way fuel valve - XXL fuel tank Sound Attenuation: The generator is engineered with optimized air intakes and specialized insulation materials to minimize noise. Sound insulation is enhanced with multi-density wool to reduce noise over a broad frequency range, making it ideal for use in noise-sensitive areas. Durability: The enclosure has a corrosion-resistant paint coating tested for over 2,000 hours (C5I-H), ensuring long lifespan even in the most challenging conditions. Safety: The generator is equipped with reinforced locks and stainless steel hinges. Doors are designed with a 20-degree chamfer to prevent water accumulation and minimize oxidation. Transport and Handling: The generator is easy to move thanks to reinforced lifting eyes and steel beams, enabling straightforward transport on construction sites. The design ensures stable and safe handling without risk of damage. Custom Configurations: The Bredenoord 500 KVA generator is available in various configurations, ranging from 20 KVA to 600 KVA. Customer-specific adaptations are possible, allowing the generator to be tailored to exact requirements and applications. Certifications: - CE-certified - European manufactured Applications: The generator is suitable for a wide range of sectors, including construction, industry, and other applications requiring reliable and efficient power supply.

Stanje: dober (rabljeno), Koda: 0370 Znamka: HAFFNER - NEMČIJA Model: DGS 187 - CE standard Dvoglava kotna žaga z nagibnima reziloma za rezanje lesa, aluminija, PVC in različnih materialov – v skladu s CE standardom Tehnični podatki: Premer rezil: 500 mm, izvrtina 30 mm Št. motorjev: 2 x 2,2 kW – 2.800 vrt/min Maksimalna dolžina reza: 3.400 mm Minimalna dolžina reza: 230 mm Nagib rezil: 45° - 90° Elektronsko nastavljanje dolžine reza na levi rezalni enoti Hidropnevmatsko pomikanje žage Pnevmatsko vpenjanje obdelovanca Kontrolna plošča z dvojnimi gumbi Elektronski programator za pozicioniranje glave Tedpfx Aljuiwqhjtsa Št. priključkov za odsesavanje: 2 x Ø 120 mm Delovni tlak: 6 bar (stisnjen zrak) Dimenzije (DxŠxV): 4.600 x 1.300 x 1.650 mm Teža: 550 kg

Stanje: dober (rabljeno), Koda: 0323 Blagovna znamka: SML - ITALIJA Model: SILVER P 35/EL - CE standard Elektronska dvoglava kotna žaga za rezanje lesa, okvirjev, PVC, aluminija, plastike in različnih materialov – CE standard. Todpjtu Hy Eofx Altsa Tehnični podatki: - Olio-pnevmatsko spuščanje žagine glave - Največja dolžina reza: 5200 mm - Najmanjša dolžina reza: 50 mm - Višina reza: 100 mm - Največja širina reza: 170 mm - Premer žaginega lista: 350 mm, izvrtina 30 mm - Motor: 3 KM vsak, 3000 vrt/min - Elektronski programator za pozicioniranje žagine glave - Bimanualni nadzor spuščanja žaginega lista - Pnevmatska pritrditev obdelovanca - 2 odsesovalna priključka, premer 60 mm - Obratovalni tlak: 7 bar - Skupne dimenzije (DxŠxV): 6300 x 1000 x 1600 mm - Teža: 1100 kg

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Tsdpfx Aljurc S Rstea Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system

Leto izdelave: 2009, stanje: dober (rabljeno), • Fully automatic • Maximum package height (mm): 650 • Minimum package height (mm): 15 • Maximum package width (mm): 1250 • Minimum package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Discharge table • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5 Todopu Anmjpfx Altea

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, WEINIG UNIMAT SUPER 4 Planer – German-made – Very good condition – Year of manufacture: 2004 – Operating manual (DTR) TECHNICAL SPECIFICATIONS: Planing width: 150 mm Planing height: 50 mm Tjdpfx Aloin Nrgjtoa Spindle diameter: 40 mm Equipped with tooling Adjustable top head 1) Bottom head: 11 kW, 6000 rpm 2) Top head: 18.5 kW, 7000 rpm 3) Bottom head: 5.5 kW, 6000 rpm Feed motor: 2.2 kW Feed speed adjustable via inverter: 0-18 m/min Feed with cardan shafts Pneumatic hold-down Three hardened steel top feed rollers One rubber top feed roller Ribbed infeed table Infeed table length: 1950 mm Total power: 37 kW Central lubrication Transport dimensions: Length/Width/Height: 320x220x220 cm Weight: ~2700 kg