Svetloba Svetilke Pole Jambora Jambor nakup rabljenega (1.394)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, številka stroja/vozila: 2460788, nosilnost: 200 kg, lastna masa: 2.950 kg, vrsta goriva: električni, barva: rdeča, transportna dolžina: 2.620 mm, transportna širina: 1.000 mm, transportna višina: 1.990 mm, Oprema: UVV varnostni pregled, Technical specifications: Working height: 11.20 m Platform height: 9.20 m Platform dimensions: 0.62 m x 0.87 m Cjdeup Dy Depfx Afqsrk Non-marking tyres Detachable control panel Gradeability: 25% General signs of use, safety inspection (UVV), fully operational

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 648 h, nosilnost: 230 kg, vrsta goriva: električni, vrsta pogona: Elektro, delovna višina: 10.000 mm, Teleskopska dvižna ploščad Stanje: Pripravljena za uporabo in popolnoma delujoča Tehnično stanje: dobro Cedpfx Afsxy Dk Dsqork

Stanje: rabljeno, Leto izdelave: 2022, skupna dolžina: 3.650 mm, • Working height: 12.65 m • Outreach (standard platform): 6.05 m • Articulation point height: 7.12 m • Slew (non-continuous rotation): 345° • Platform load capacity: 1,200 kg • Maximum ground pressure: 14.0 kg/cm² • Drive speed (stowed): 6.0 km/h • Outside turning radius: 2.60 m • Inside turning radius: 0.75 m • Gradeability: 30% • Steel platform, 0.70 m x 1.05 m (L x W) • Rear entry with sliding latch • Fully proportional joystick for drive and lift functions, with integrated rocker for thumb steering • 2 mini-joysticks allow proportional control of the mast and jib lift/lower functions • 4.14 m articulated jib • Function activation with enlarged LCD status display • Load monitoring system • AC power outlet in the platform • Large tool tray • Direct electric two-wheel drive Csdpfxexqhwpe Afqerk • Brushless AC drive motors • Faster battery charging • Automatic power-save function in standstill • Function reduction in case of deep discharge • On-board diagnostic system with integrated display • Automatic rear wheel brakes • Curved polyester protective covers • Motorized platform slewing • High-performance steel mast, rotatable 345° on rollers • Chain slack detection • 3° tilt alarm with warning light • Chassis width: 1.20 m • Lifting and tie-down lugs • Key-locked selector switch for ground control • Battery level indicator • Hour meter • Horn • Directional drive system • Harness anchor points • Xenon beacon • Manual emergency lowering • Passive pothole protection

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, številka stroja/vozila: OPH10ENEU, nosilnost: 385 kg, lastna masa: 690 kg, gradbena višina: 1.395 mm, vrsta goriva: električni, skupna dolžina: 1.460 mm, vrsta pogona: Elektro, gradbena širina: 750 mm, delovna višina: 5.000 mm, Teleskopska dvižna ploščad Crsdpfx Afjxym Swsqjk Številka šasije: OPH10ENEU Stanje: Nova naprava Tehnično stanje: novo Sprednje pnevmatike: superelastične Stanje sprednjih pnevmatik: nove Zadnje pnevmatike: superelastične Stanje zadnjih pnevmatik: nove Delovni žaromet zadaj, delovni žaromet spredaj, CE certifikat, varnostna luč, litij-ionska tehnologija, LED, LCD zaslon, PIN koda, RFID, delovni žarometi spredaj in zadaj, modra luč, varnostna luč

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, številka stroja/vozila: 013944, nosilnost: 200 kg, lastna masa: 4.800 kg, gradbena višina: 1.980 mm, vrsta goriva: električni, skupna dolžina: 3.360 mm, vrsta pogona: Elektro, doseg roke: 5.150 mm, gradbena širina: 980 mm, delovna višina: 12.000 mm, Teleskopska dvižna ploščad na drogu Številka podvozja: 013944 Tehnično stanje: Novo Opis: Poiščite svoj viličar pri STA-TECH! Naj bo paletni, električni, dizelski ali plinski viličar – ponujamo cenovno ugodne, delujoče modele in nove viličarje. STA-TECH je vaš partner za: • Nakup in najem viličarjev ter skladiščne tehnike • Odkup rabljenih strojev in logistiko • Medznamki servis: popravilo, vzdrževanje, pregledi. Csdpfow Rhmrsx Afqsrk

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, High-lift pallet truck, KAISER + KRAFT B1000 Electric lifting, Manual driving, pulling Very compact and manoeuvrable Full free lift, suitable for low ceiling spaces, Device height 196 cm, even with forks raised. Crsdpfx Aev Hf Uhjfqsk Width: 75 cm Length: 140 cm, of which Fork length: 90 cm Max. lift height: 160 cm Nominal lifting capacity: 1000 kg Manual parking brake Tandem load rollers Paired tiller steering Very well maintained, New maintenance-free gel battery Integrated charger

Stanje: novo, Leto izdelave: 2024, Genie GR-26J Runabout electric vertical mast lift, new, used, demo units available Cjdporh Er Asfx Afqjrk

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 381 h, nosilnost: 210 kg, vrsta goriva: električni, vrsta pogona: Elektro, delovna višina: 6.000 mm, Teleskopska dvižna ploščad Stanje: Pripravljena za uporabo in popolnoma delujoča Tehnično stanje: dobro Crodpfxsxr Shzj Afqek

Stanje: rabljeno, Leto izdelave: 2023, skupna dolžina: 3.650 mm, • 8x battery, 215-260Ah • 1x socket outlet in basket • Residual-current circuit breaker (RCD) • Generator • Built-in charger • Maximum ground pressure 14.0 kg/cm² • Travel speed – lowered 6.0 km/h • Turning radius – outside 2.60 m • Turning radius – inside 0.75 m • Gradeability 30% • Working height 12.65 m • Working outreach (standard platform) 6.05 m • Articulation height 7.12 m • Slewing (non-continuous rotation) 345° • Platform capacity 1,200 kg • Basket jib – total length 4.14 m • Basket jib – vertical working range 120° (+60° / −60°) Csdpfxjxd Hx So Afqsrk • Rear access with sliding bolt • Fully proportional joystick for drive and lift operation with integrated rocker for thumb steering • 2 mini-joysticks enable proportional control for lifting and lowering mast and basket jib • 4.14 m articulated jib • Function activation with enlarged LCD status display • Load monitoring system • AC power socket in work basket • Large tool tray • Direct electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power-saving mode when stationary • Function throttle-down in case of deep discharge • On-board diagnostics system with integrated display • Automatic rear wheel brakes • Curved polyester protective hoods • Motorized platform slew • High-performance steel-roller lifting mast, 345° rotatable • Chain slack detection • 3° tilt alarm with warning light • Frame width 1.20 m • Lifting and lashing eyes • Key-secured ground operation selector switch • Battery status indicator • Hour meter • Horn • Travel direction system • Harness anchor points • Xenon flashing beacon • Manual emergency lowering • Passive pothole protection • Tires (non-marking) 457 x 178 mm • Electrical system 48V DC • Deep-cycle batteries 4 x 48 V – 260 Ah • On-board battery charger, 110 V / 230 V HF • Drive motors: 2 AC motors • Electric (pump) motor: 3.5 kW, 48 V DC • Hydraulic system: hydraulic tank 15 l

Stanje: rabljeno, Leto izdelave: 1998, Bar feeder Müller Martini 3736 Year of manufacture: 1997/1998 Crsdpetq Nnxofx Afqok Description: - Bar feeder: 2 units

Stanje: novo, - Kovinska obdelava - Vrsta goriva: Les ali plin - NP:6317772 - Notranje dimenzije: 1000x1000mm - Zunanje dimenzije: 1400x1500mm - Odprtina: 550x280mm - Skupna teža kg: 1100 Csdpjw Emm Iofx Afqjrk - Dimnik za dim (Ø) cm: 20 - Kapaciteta za pico (Ø 28/30cm): 4/5 Plinski gorilnik na voljo kot opcija

Stanje: zelo dobro (rabljeno), Popolnoma avtomatska linija za proizvodnjo kolov ali stebrov: vstopni transportni trak, stopničasto podajalno napravo, verižni transporter, dvoglava stroj za zaokroževanje, ločilni modul, prečna krožna žaga za razrez na dolžino, enota za ošiljevanje in posnemanje robov. Možna izdelava kombinacije posnet/posnet rob ali hkratna obdelava dveh kolov — en s konico in posnetim robom, drugi s posnetimi robovi. Največji premer obdelovanca je 120 mm. Cedpfx Astyv S Isfqork

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 386 h, nosilnost: 210 kg, vrsta goriva: električni, vrsta pogona: Elektro, delovna višina: 6.000 mm, Teleskopska stebriščna dvižna ploščad Stanje: Pripravljena za uporabo in v celoti delujoča Codpfexr Shnex Afqerk Tehnično stanje: dobro

Stanje: novo, Leto izdelave: 2023, skupna dolžina: 3.700 mm, • 8x battery, 215-260Ah • 1x socket outlet in basket • Residual-current circuit breaker (RCD) • Generator • Built-in charger • Maximum ground pressure 14.0 kg/cm² • Travel speed – lowered 6.0 km/h • Turning radius – outside 2.60 m • Turning radius – inside 0.75 m • Gradeability 30% Crsdsxd Hrfspfx Afqsk • Working height 12.65 m • Working outreach (standard platform) 6.05 m • Articulation height 7.12 m • Slewing (non-continuous rotation) 345° • Platform capacity 1,200 kg • Basket jib – total length 4.14 m • Basket jib – vertical working range 120° (+60° / −60°) • Rear access with sliding bolt • Fully proportional joystick for drive and lift operation with integrated rocker for thumb steering • 2 mini-joysticks enable proportional control for lifting and lowering mast and basket jib • 4.14 m articulated jib • Function activation with enlarged LCD status display • Load monitoring system • AC power socket in work basket • Large tool tray • Direct electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power-saving mode when stationary • Function throttle-down in case of deep discharge • On-board diagnostics system with integrated display • Automatic rear wheel brakes • Curved polyester protective hoods • Motorized platform slew • High-performance steel-roller lifting mast, 345° rotatable • Chain slack detection • 3° tilt alarm with warning light • Frame width 1.20 m • Lifting and lashing eyes • Key-secured ground operation selector switch • Battery status indicator • Hour meter • Horn • Travel direction system • Harness anchor points • Xenon flashing beacon • Manual emergency lowering • Passive pothole protection • Tires (non-marking) 457 x 178 mm • Electrical system 48V DC • Deep-cycle batteries 4 x 48 V – 260 Ah • On-board battery charger, 110 V / 230 V HF • Drive motors: 2 AC motors • Electric (pump) motor: 3.5 kW, 48 V DC • Hydraulic system: hydraulic tank 15 l

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 282 h, nosilnost: 200 kg, vrsta goriva: električni, vrsta pogona: Elektro, Teleskopska dvižna ploščad Stanje: Pripravljena za uporabo in popolnoma delujoča Tehnično stanje: dobro Crodpfx Aew Sz Rgofqjk Opis: Delovna višina: 8,20 m Delovni doseg: 2,65 m Nosilnost ploščadi: 200 kg Dvižna višina: 5,08 m Zasuk: 345° Višina stroja: 1,99 m Dolžina stroja: 2,10 m Širina stroja: 0,99 m Teža stroja: 1860 kg

Stanje: rabljeno, Leto izdelave: 2023, skupna dolžina: 3.650 mm, • 8x battery, 215-260Ah • 1x socket outlet in basket • Residual-current circuit breaker (RCD) • Generator • Built-in charger • Maximum ground pressure 14.0 kg/cm² • Travel speed – lowered 6.0 km/h • Turning radius – outside 2.60 m • Turning radius – inside 0.75 m • Gradeability 30% • Working height 12.65 m • Working outreach (standard platform) 6.05 m Csdpfxsxd E R Hs Afqsrk • Articulation height 7.12 m • Slewing (non-continuous rotation) 345° • Platform capacity 1,200 kg • Basket jib – total length 4.14 m • Basket jib – vertical working range 120° (+60° / −60°) • Rear access with sliding bolt • Fully proportional joystick for drive and lift operation with integrated rocker for thumb steering • 2 mini-joysticks enable proportional control for lifting and lowering mast and basket jib • 4.14 m articulated jib • Function activation with enlarged LCD status display • Load monitoring system • AC power socket in work basket • Large tool tray • Direct electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power-saving mode when stationary • Function throttle-down in case of deep discharge • On-board diagnostics system with integrated display • Automatic rear wheel brakes • Curved polyester protective hoods • Motorized platform slew • High-performance steel-roller lifting mast, 345° rotatable • Chain slack detection • 3° tilt alarm with warning light • Frame width 1.20 m • Lifting and lashing eyes • Key-secured ground operation selector switch • Battery status indicator • Hour meter • Horn • Travel direction system • Harness anchor points • Xenon flashing beacon • Manual emergency lowering • Passive pothole protection • Tires (non-marking) 457 x 178 mm • Electrical system 48V DC • Deep-cycle batteries 4 x 48 V – 260 Ah • On-board battery charger, 110 V / 230 V HF • Drive motors: 2 AC motors • Electric (pump) motor: 3.5 kW, 48 V DC • Hydraulic system: hydraulic tank 15 l

Stanje: novo, Condition: New Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €103,620 Leasing rate: €1,958.42 Grinding length: 400 mm Credpfewiq U Rex Afqjk Distance spindle - table: 600 mm Table size: 400 mm Max. grinding radius: 225 mm Magnetic chuck: 400 mm Max. workpiece weight: 50 kg Automatic vertical feed: 450 mm Spindle speed: 500 - 2200 rpm Spindle motor: 5.5 kW Total connected load: 19 kW Length: 2800 mm Width: 2800 mm Height: 2610 mm Transport dimensions: 2850 x 2000 x 2470 mm Weight: 3450 kg Grinding wheel dimensions: Ø 355 x 38 x Ø 127 mm Min. input: 0.001 mm Servo feed motors Y/Z: 1.7 kW Rotary table motor: 2.4 kW Positioning accuracy: 0.005 mm Repeatability: 0.003 mm iSurface control with 10.4" touchscreen for fully automatic 3-axis grinding Integrated manual grinding wheel balancing Travelling column with ribbed structure AC servo motors for Y/Z axes and rotary table 1 pc. grinding wheel flange 1 pc. grinding wheel 355 x 38 x Ø 127 mm Coolant system with automatic paper filter and magnetic separator Automatic table-mounted dressing device with compensation Complete splash guard enclosure Linear encoder (Fagor) for downfeed motion (0.001 mm) Electromagnetic round chuck, fine pole (1+3 mm) Work lamp Warning light Operating manual in German or English ALTERNATIVE: Model version FRG-400S with Smart iControl for profile grinding, additional charge €3,100 (Example photos – show model FRG-600)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, nosilnost: 3.000 kg, dvižna višina: 550 mm, vrsta goriva: dizel, tip droga: triplex, moč: 56 kW (76,14 KM), Oprema: kabina, pogon na vsa štiri kolesa, spojka prikolice, JCB 930 4x4 Leto izdelave: 2003 Delovne ure: neznane Dvižna zmogljivost: 3 tone Cjdpfxoxyk Ezo Afqsrk Gradbena višina: 2,74 m Dvižna višina: 5,50 m Moč: 56 kW - Triplex jambor - Bočni pomik - Zaščitna mreža za tovor - Pogon na vsa kolesa - Kabina z ogrevanjem - Svetlobni sistem - Takoj pripravljen za uporabo - Originalni lak Prodajna cena: 13.500 EUR neto Možna ugodna dostava!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Tiskalnik Epson Stylus Pro 9700 kupljen leta 2012 z zelo malo obratovalnimi urami in v odličnem stanju. Poleg tiskalnika priložim dokumentacijo in nekaj kartuš. Tiskalnik je mogoče preizkusiti na stroške kupca. Cjdpfoxy Sygox Afqsrk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Stroj sem kupil rabljen in dal narediti velik kompletni servis. Poleg sta še dva polna, neodprta kanistra z barvo. Glavi Magenta light in Cyan light sem dal nedavno deaktivirati, vendar ju je mogoče takoj ponovno aktivirati. Že ob nakupu je bila aktivna le ena bela tiskalna glava. Tiskalnik deluje brezhibno. Za fotografijo sem odstranil pokrov šob – ta je seveda priložen ;) Priložen je tudi nastavek za tiskanje iz role. Uporabljam ga le zelo redko. Transport si prosim organizirajte sami. Credpfxjw R Tx Tj Afqek

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control system - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gear transmission - Automatic clamping on X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling on Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool trolley Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle carrier: 150 mm Main drive: - Pole-changing three-phase brake motor: gear transmission with forward/reverse - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring assembly - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axes: 1 DC motor - Ball screw spindles: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 Crodpfjwhk Ubox Afqek - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Footprint (including safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Stanje: novo, Leto izdelave: 2025, Praktikant GSD One of the best-selling and most popular conventional precision lathes stands out due to: advanced engineering highest precision durability ergonomics proven in daily practice minimal space requirements and a wide range of accessories. Proven for decades in single-part and small-batch production, across trade and industry, for training and further education, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed shaft cover Main spindle brake Toolroom accuracy according to DIN 8605 Pole-changeable brake motor Headstock gearbox 16 fixed spindle speed steps Digital position readout (optional) LED machine light TECHNICAL DATA: WORKING AREA Centre height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Centre distance 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter at front bearing 70 mm MAIN DRIVE Csdowhzcpepfx Afqork Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 TEST ACCURACY DIN 8605 * Whitworth threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only possible using additional change gears. The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For details on equipment and configuration, please contact us.

Stanje: novo, Condition: new Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €113,620 Leasing rate: €2,147.42 Grinding length: 600 mm Distance spindle – table: 600 mm Table size: 600 mm Max. grinding radius: 325 mm Magnetic chuck: 600 mm Max. workpiece weight: 205 kg Automatic vertical feed: 450 mm Spindle speed: 500 – 2,200 rpm Spindle motor: 5.5 kW Total power requirement: 19 kW Length: 2,800 mm Width: 2,800 mm Height: 2,610 mm Transport dimensions: 2,850 x 2,000 x 2,470 mm Weight: 3,500 kg Table height: 820 mm Grinding wheel dimensions: Ø355 x 38 x Ø127 mm Min. input: 0.001 mm Servo feed motors Y/Z axes: 1.7 kW Rotary table motor: 2.4 kW Rotary table speed: 10–150 rpm Positioning accuracy: 0.005 mm Repeatability: 0.003 mm iSurface control system with 10.4'' touchscreen for fully automatic 3-axis grinding Integrated manual balancing of grinding wheel Column-type design with ribbed structure AC servo motors for Y/Z axes and rotary table Crodewiq Nnspfx Afqok 1 pc. grinding wheel flange 1 pc. grinding wheel 355 x 38 x Ø127 mm Coolant system with automatic paper filter and magnetic separator Automatic table-mounted dressing device with compensation Complete splash guard enclosure Fagor linear scale for downfeed movement (0.001 mm) Fine-pole electromagnetic circular chuck (1+3 mm) Work lamp Warning light Operating manual in German or English ALTERNATIVE: Model variant FRG-600S with Smart iControl system for profile grinding, surcharge €3,100.00 (profile grinding)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 8.878 h, nosilnost: 2.500 kg, dvižna višina: 4.700 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.120 mm, moč: 30 kW (40,79 KM), Opis vozila Dizelski viličar LINDE H25D-01 Letnik 2010 Po števecu 8.878 ur Dvižna zmogljivost: 2,5 tone Gradbena višina: 2,12 metra Dvižna višina: 4,70 metra 30 kW - Triplex prosti dvig jamborja - Bočni pomik - Nastavljive vilice - Zaščitna mreža za tovor - Delovne luči - Originalni lak - Takoj pripravljen za uporabo Credpfx Asxxgp Tofqjk Prodajna cena: 9.900,-- neto Možna tudi ugodna dostava!

Stanje: rabljeno, Leto izdelave: 1987, - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping system - Automatic speed change gearbox - Automatic clamping on X-/Y-/Z-axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling on Z-/Y-axes - Year of manufacture: 1987 Technical Data Working Area: - X-axis (longitudinal): 485 mm - Y-axis (transversal): 385 mm - Z-axis (vertical): 380 mm - Quill travel vertical: 80 mm - Vertical milling head traversable on spindle carrier: 150 mm Main Drive: - Motor: pole-changing three-phase braking motor and gearbox with forward/reverse operation - Power output: 3.7 / 4.4 kW - 18 spindle speeds: 50 - 2500 rpm - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: hydraulic Feed Drive: - X-axis: 1 DC motor - Y- and Z-axes: 1 DC motor - All axes: recirculating ball screws - Programmable feed rate: 10 - 1000 mm/min - Rapid traverse X-/Y-/Z-axis: 2000 mm/min Universal Table: Credpfxeu Awlzs Afqsk - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore Ø/depth: 63H6 / 8 mm - Distance table center to mounting surface: 260 mm - Max. clearance height (vertical spindle/table surface): 490 mm - Permissible load: 300 kg - Weight: 230 kg - Rotation range in horizontal position (C-axis): 360° - Tilting range (A-axis): +450 / -150° - Swivel range (B-axis): ±450° - Measuring range with direct digital display: Resolution 360,000 x 0.001° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Required floor space including safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg - Floor loading: 3000 kg/m²