TGT V2 Maxima
TGT V2 Maxima

Leto izdelave

2020

Stanje

Rabljeno

Lokacija

Avstrija

Prikaži karto

Podatki o stroju

Oznaka stroja:: TGT V2 Maxima

Proizvajalec:: TGT

Model:: V2 Maxima

Leto izdelave:: 2020

Stanje:: pripravljen za uporabo (rabljen)

Cena in lokacija

Lokacija:: , Avstrija

Pokliči

Podrobnosti ponudbe

ID oglasa:: A20702460

Referenčna številka:: AT-OTH-TGT-2020-00001

Posodobitev:: nazadnje dne 26.02.2026

Opis

This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It is equipped with an ELBARON mist extraction system and includes collets for diameters up to 20 mm. Extras encompass robot pallets, a spare spindle, and grinding wheel packages. Take advantage of this opportunity to acquire the TGT V2 Maxima. Contact us for further information.

Additional Equipment

• ELBARON mist extraction / Robot pallets / Collets for all standard diameters up to 20 mm / Spare spindle / Grinding wheel packages, including approximately 25 grinding wheels

Machine Advantages

Technical Machine Advantages

• Operating hours: 42,000 minutes
• Machine in as-new condition / original spare spindle available, ensuring no downtimes during spindle service / full documentation and installation manual included

Further Information

Spindle Bearings:
Front/Rear: 7010 CTYN DU L P4 (NACHI)
Lubrication grease: Kluberisoflex Super LDS 18 or NBU 25 (2.75 cc per bearing)
Tightening torque: 58 Nm (front/rear)
Runout accuracy: ≤ 0.002 mm
Motor: LENZE 7.5 kW (10 HP), 4-pole
Speed: 0–4500 rpm (frequency inverter)
Belt: PJ-12-1143L (GATES/FENNER)

2 Feed Drive Units – X and Z Axes
Travel:
X-axis: 300 mm
Z-axis: 680 mm

Ball Screw:
Type: Fixed–Supported
Bearings: 25TAB06DBFLP4 (NACHI, 62 Nm tightening torque)
Ball screw: BIF 3210A-5 (THK, Ø32 mm, pitch 10 mm)
Motor: BECKHOFF AM8053-0G20 (11.4 Nm)
Coupling: SFC 050 DA2-24B-20B (MIKI PULLEY)

3 Feed Drive Unit – Y-Axis
Travel: 300 mm
Ball Screw:
Bearings: 25TAB06DBFLP4 (NACHI, 62 Nm)
Ball nut specification: BIF 3210-5 (THK)
Motor: BECKHOFF AM8061-0GB1 (12.8 Nm)
Coupling: SFC 060 DA2-20B-32B (MIKI PULLEY)

Rotary Table – A-Axis
Bearings: 7014 CTYN DUL P4 (NACHI)
Tightening torque: 255 Nm (front), 62 Nm (rear)
Runout accuracy: ≤ 0.002 mm
Lubrication grease: Kluberisoflex Super LDS 18 (3.6 cc per bearing)

5. Rotary Table Unit – C-Axis
Bearings: YRT 100 (GOLDBULL)
Mounting torque: 14 Nm (3-stage: 40% → 70% → 100%)
Motor: ORION_230/140 (NIMBLE/UCAM), 238 Nm
Encoder: RENISHAW

Main Coolant System
Flow rate: 85 L/min
Tank capacity: 400 liters
Pump: RKM206 (Rajamane, 1.5 kW, 6-stage)
Filtration: Paper filter Para mol N 334/150 (0.01 mm)

Hodpsx D Hi Rjfx Ab Eefd
Lubrication Arrangement
Oil pump: ELU-2700 (Cenlub, 3 liters, 415V AC)
Dosing cartridge: 320410-3 (LUBRICANT)

Steady Rest (manual)
Vertical lift: 3 mm
Diameter range: Ø3–Ø22 mm
Carriage travel: 120 mm

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2017

1.403 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 631 7... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Dražba

Steiermark

154 km

Stroj za brušenje orodja
TGTV2 Maxima

Podrobnosti

Mali oglas

Krožna žaga za lahke kovine / aluminij MTI AS-800

Cochem-Brauheck

732 km

Krožna žaga za lahke kovine / aluminij
MTIAS-800

Pokliči

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Optional with length measuring system or automatic positioning system Hedpfxed Szf No Ab Esfd Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Poglej podrobnosti

Mali oglas

Trieben

154 km

Stroj za brušenje orodja
TGTV2 Maxima

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 4.000 h, Stroj je v brezhibnem stanju. Opremljen je s sistemom za odsesavanje brusnega prahu ELBARON. Po želji je možno stroj dobaviti tudi brez te naprave. Paket vključuje vpenjalne tule za vse običajne premere do 20 mm. Priložen je popoln opis in namestitveni priročnik. Na zahtevo je na voljo originalna rezervna vretena, zato pri vzdrževanju vretena ni čakalnih dob. Hfjdpfx Ast Dyknsb Esd

Poglej podrobnosti

Mali oglas

Grevesmühlen

901 km

Stroj za brušenje okvirjev
RivoGA250

Pokliči

Mali oglas

Cloppenburg

897 km

2010 Vollmer CL 200
VollmerCL 200

Pokliči

Stanje: rabljeno, Leto izdelave: 2010, Suitable for the automatic grinding of tooth face, tooth back, and blade body on carbide-tipped circular saw blades in a single clamping operation. All common tooth geometries (flat, alternate, trapezoidal tooth, etc.) can be ground automatically and in a single pass. Accessories: - Full enclosure - Measuring probe - Device for grinding with oil cooling - Automatic fire extinguishing system - Grinding mist extraction N 183 - Alphanumeric keypad - Oil catch tray - Machine lamp Saw diameter: 80–840 mm Hjdpfx Aowp Ebleb Ejfd Bore diameter: from 10 mm Blade thickness: < 8 mm Tooth pitch: 6–120 mm Cutting length:

Poglej podrobnosti

Mali oglas

Hladno krožne žage - avtomatski MEP TIGER 352 NC 5.0

Remseck am Neckar

527 km

Hladno krožne žage - avtomatski
MEPTIGER 352 NC 5.0

Pokliči

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness. Hsdpfxsfg Rlcs Ab Eofd

Poglej podrobnosti

Mali oglas

Brügg

600 km

Stroj za brušenje orodja
EWAGWS 11 SP

Pokliči

Stanje: rabljeno, EWAG WS 11 SP je brusilni stroj za orodja, zasnovan za natančnost, visoko točnost in zanesljivost. Delovne zmogljivosti: hod osi X/Y/Z 100 mm, premer brusilnega koluta 75 mm, hitrost vretena obdelovanca 100–1300 obr/min, vertikalna nastavitev brusne glave 100 mm, horizontalno 165°, hitrost brusilnega vretena 2500–7100 obr/min, vpenjanje s kleščami 20 W. Tehnični podatki: priključek 50 Hz 3x380 V, skupna priključna moč 2 kVA, masa stroja cca 400 kg, dimenzije D850×Š850×V1580 mm. Oprema: prirobnica za brusilni kolut, odsesavanje prahu, set brusilnih kolutov, svetilka, spiralna brusilna glava W20, pomikalna enota (Z-os) 4 E-M, brusni hod 3 J. Omogoča doseganje strogih toleranc; značilna uporaba v avtomobilski industriji, urarstvu, strojništvu, letalstvu in medicinski tehniki. Hfedpoxyi I Ijfx Ab Eed

Poglej podrobnosti

Mali oglas

Ekscentrični pritisk - enojni stolpec SCHULER PDr C63-315

Plettenberg

768 km

Ekscentrični pritisk - enojni stolpec
SCHULERPDr C63-315

Pokliči

Leto izdelave: 2002, stanje: rabljeno, Pressure: 63 t Reach: 315 mm Stroke: 8–100 mm Hfsdelp U D Topfx Ab Eod Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Poglej podrobnosti

Mali oglas

Reiden

550 km

Radialni vrtalni stroj
OerlikonUB2

Pokliči

Mali oglas

Rezalni in obdelovalni center Casadei Samec ALURANGER 5016

Zamość

791 km

Rezalni in obdelovalni center
Casadei SamecALURANGER 5016

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical parameters specified in the manual, on workpieces made of: plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical worktable allows for easy loading and unloading of processed parts and minimises the maximum dimensions of the machine to the essential minimum. Tool changing using a 10-position side-mounted tool magazine enables a wide range of operations without the need to remove the workpiece from the table. Hfedpfxsmzbr Ss Ab Eed Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speed (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Poglej podrobnosti

Oglašujte tukaj

TGT V2 MaximaTGT V2 Maxima

Podatki o stroju

Cena in lokacija

Podrobnosti ponudbe

Opis

Ponudnik

Pošlji povpraševanje

Telefon & Faks

TGT V2 Maxima
TGT V2 Maxima